Lacie 5bign_v2 support

[Draftmancorp]

it rebooting....

[fvdw]

yopu have again an error when extracting the tar archive, you should have made the reboot...
please read post and output more carefully

[Draftmancorp]

I did every single step.... :dontknow ...the reboot is done...what i have to do? repeat the process?

[fvdw]

;) ...shit happens

yes connect to the nas with putty and do

Code: Select all

rm -f /lacie-boot/sda1boot

reboot the nas

connect with putty and post output of

Code: Select all

cat boot.log

In the meantime I will prepare a disk image and we will write using dd command...to /dev/sda1

[Draftmancorp]

In the meantime I will prepare a disk image and we will write using dd command...to /dev/sda1

Here i'am, .....the dd command don't erase my Public folder wit all my backup right?? :(

Code: Select all

login as: root
root@192.168.1.189's password:
root@fvdwsl-base:/ # cat boot.log
start boot log
booting using  root file system...
make dev node for buttons...
make dev node for tun device...
enable IP forwarding...
start buttons control daemon
buttons-nwsp2 daemon started
Tue Jul 24 01:49:19 GMT+1 2012
run udevstart to update dev nodes when necessary
inserting kernel modules:
configure loopback netwerk interface
starting php based setup routines step 1



 * Initial XML configuration file...     [ OK ]
 * Configuring Disks...                                  [ OK ]
 * Configuring System Users...
        Root password: use default password
        Set users, linux and samba accounts      [ OK ]
 * Starting mount of volumes...
   - Mounting volume Disk1:                      [ OK ]
   - Mounting volume Disk2:                      [ OK ]
   - Mounting volume Disk3:                      [ OK ]
   - Mounting volume Disk4:                      [ OK ]
   - Mounting volume Disk5:                      [ OK ]
 * Finishing mount of volumes...                 [ OK ]
 * Generating Hosts File...                      [ OK ]
 * Configuring System Hostname...                [ OK ]
 * Configuring Samba...                                  [ OK ]
 * Configuring LAN interface...                  [ OK ]
 * Starting udevd...                                     [ OK ]
 * Starting web server...                                [ OK ]
 * Initializing Timezone...                      [ OK ]
 * Configuring Samba...                                  [ OK ]
 * Starting syncawayd...                                 [ OK ]
start portmap service
starting php based setup routines step 2


 * Starting dropbear...                                  [ OK ]
 * Kill temporary dropbear...                    [ OK ]
 * Starting daemon update Hosts File...  [ OK ]
starting php based setup routines step banner


*** fvdw-sl NAS firmware
    This is fvdw-sl version: fvdw-sl 14.0
    built on: December 23 2012

    LAN IP address: 192.168.1.189 (DHCP)

    Port configuration:

    LAN   -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
rcS finished
root@fvdwsl-base:/ #


[Jocko]

Yes, if you make no error in the commandline, your data will be safe

[fvdw]

uploading the files right now...

[Draftmancorp]

ok, so, :scratch what i have to do after download. this seems a labyrinth.

[fvdw]

I have sent the image

[fvdw]

unpack the rar archive on your windows pc, you will get a file with name "fvdw-sl-14-1-5big2-17may2013.img"
Put this file in the shared folder public on the nas
Connect with putty and give command

Code: Select all

dd if=/share/1000/public/fvdw-sl-14-1-5big2-17may2013.img of=/dev/sda1

be 100% sure that in this command behind "of=" you have entered/dev/sda1
let it finished and post output
please do not reboot yet