plugout.net

by **fvdw** » Sat Apr 20, 2019 9:12 pm

I will post it in a few minutes

by **fvdw** » Sat Apr 20, 2019 9:28 pm

here it is the rar archive (9 files), extract it, contains a zip file, fvdw-sl-console-6-17-0-5jun2017-32bits.zip, and a file, MD5-sum.txt containing the MD5 sum of the file fvdw-sl-console-6-17-0-5jun2017-32bits.zip. This you can use to check if the zip file is not corrupt.
You need to extract the zip file to a location were you want to install the fvdw-sl-console. I suggest you remove the the version you have installed now first to avoid mistakes

--update files removed

by **Draftmancorp** » Sun Apr 21, 2019 7:54 am

Nothing.

Checksum ok.
Installation ok.
Boot sequence with back led seems ok.
then nothing... no way to find it.

Can be a possible problem the lacie firmware? here it have the 2.2.12.2?
Or may it want all disks inserted to boot properly? i don't know..

by **Draftmancorp** » Sun Apr 21, 2019 8:06 am

I tried with another HDD (WD Blue 500gb)
All ending ok like before and NO intermittant sound.
But no ping and no assistant result...

So, i thinking is not the HDDs I use the problem.
(i'm going to the church see you later)

by **fvdw** » Sun Apr 21, 2019 9:22 am

Can be a possible problem the lacie firmware? here it have the 2.2.12.2?
Or may it want all disks inserted to boot properly? i don't know..

No as there is no lacie firmware on the disk. The fvdw-sl firmware loads a kernel from sda6 and boot that using the root file system on sda7.
As your old 5big2 also failed to prepare a new disk but runs the firmware already installed in the past I think there must be something disturbing the setup via fvdw-sl console or extracting the archives on your pc.
Which programs do you use to extract files and to download files from our website.

Ps I think that using sda disk from your old 5big2 in the new 5big2 will be save because the new 5big2 worked ok with the lacie disks but I cannot guarantee. If you try it it is at your own risk.

A last attempt that I see us that we can use uboot console in fvdw-sl console to load a kernel with netconsole support. This would show what the kernel is doing and maybe why it fails.
I will post later some instructions, family is coming to visit today

by **fvdw** » Sun Apr 21, 2019 9:41 am

this is how to boot using ubboot console of the fvdw-sl console

how load the new kernel using u-boot console

I assume the UIMAGE-466-KIRKWOOD-7 kernel is present in the tftp/firmware/kirkwood directory of the fvdw-sl console
Switch off the nas, start fvdw-sl console and choose as action,
start tftp server
after that choose as action u-boot console

Start the nas and wait until u-boot console interrupts the boot
and the marvell>> prompt appears in the uboot console window

in the u-boot console window give these commands

Code: Select all: setenv bootargs console=ttyS0,115200 netconsole=6666@${ipaddr}/,6666@${serverip}/ root=/dev/sda7

use the commands exactly as they are given so do not replace the parameters ipaddr and serverip leave them as they are in this command
PS the u-boot console window has a paste option (right click on title bar)

check if now bootargs parameter is set to this string

Code: Select all: printenv bootargs

proceed

Code: Select all: ide reset tftpboot 0x800000 firmware/kirkwood/UIMAGE-466-KIRKWOOD-7

The kernel should upload now, if that gone ok, boot it

Code: Select all: bootm

You should see in the u-boot window that the kernel is uploaded and loaded

If the kernel loads and runs it should show you in the u-boot console window after mention starting kernel the detailed output of kernel loading. If the kernel fails before netconsole is activated in the kernel then there will be no output

by **Draftmancorp** » Sun Apr 21, 2019 2:06 pm

For unzipping zip file I use windows explorer.
For unzipping other format I use 7zip.

One thing I've to notice, IF I turn on the 5Big2 with only first (original)x disk and other 4 empty slot, i CAN'T see it in lacie network assistant.
IF i remove all disk, so if all 5 slot remain empty, idem. The nas is unattainable.
The ONLY way for communicating and manage with it for now is to boot it with all 5 original disk in raid6. is it normal? can be this information helpful?

OK, all step done, see the response:

Code: Select all: provided by fvdw waiting for u-boot.. starting u-boot net console click on window and press enter Marvell>> setenv bootargs console=ttyS0,115200 netconsole=6666@${ipaddr}/,6666@${serverip}/ root=/dev/sda7 setenv bootargs console=ttyS0,115200 netconsole=6666@${ipaddr}/,6666@${serverip}/ root=/dev/sda7 Marvell>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 netconsole=6666@192.168.0.188/,6666@192.168.0.177/ root=/dev/sda7 Marvell>> ide reset ide reset Reset IDE: Marvell Serial ATA Adapter Integrated Sata device found Port Multiplier found @ 0 0. Vendor: 11ab ports: 4 [0 0 3]: Enable DMA mode Device 3 @ 0 0 3: Model: ST2000DM006-2DM164 Firm: CC26 Ser#: Z4ZATWA1 Type: Hard Disk Supports 48-bit addressing Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512) Port Multiplier found @ 0 1. Vendor: 11ab ports: 4 Marvell>> tftpboot 0x800000 firmware/kirkwood/UIMAGE-466-KIRKWOOD-7 tftpboot 0x800000 firmware/kirkwood/UIMAGE-466-KIRKWOOD-7 Using egiga0 device TFTP from server 192.168.0.177; our IP address is 192.168.0.188 Filename 'firmware/kirkwood/UIMAGE-466-KIRKWOOD-7'. Load address: 0x800000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# done Bytes transferred = 4887024 (4a91f0 hex) Marvell>> bootm bootm ## Booting image at 00800000 ... Image Name: linux-4.6.6-kirkwood-fvdw Created: 2017-05-07 10:19:57 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4886960 Bytes = 4.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.6 (root@fvdwsl-5big2.local) (gcc version 4.9.3 (GCC) ) #7 PREEMPT Sun May 7 11:50:52 CEST 2017 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: LaCie 5Big Network v2 [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.0.188/,6666@192.168.0.177/ root=/dev/sda7 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 509736K/524288K available (7113K kernel code, 328K rwdata, 1940K rodata, 200K init, 395K bss, 14552K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc08df8e8 (9055 kB) [ 0.000000] .init : 0xc08e0000 - 0xc0912000 ( 200 kB) [ 0.000000] .data : 0xc0912000 - 0xc0964320 ( 329 kB) [ 0.000000] .bss : 0xc0964320 - 0xc09c7004 ( 396 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:114 [ 0.000000] Switching to timer-based delay loop, resolution 6ns [ 0.000009] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 16.299012] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 16.299293] Console: colour dummy device 80x30 [ 16.299321] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 16.299341] pid_max: default: 32768 minimum: 301 [ 16.299484] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 16.299503] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 16.300082] CPU: Testing write buffer coherency: ok [ 16.300444] Setting up static identity map for 0x81e0 - 0x8238 [ 16.303492] VFP support v0.3: not present [ 16.303839] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 16.303981] xor: measuring software checksum speed [ 16.399369] arm4regs : 1088.400 MB/sec [ 16.499087] 8regs : 653.600 MB/sec [ 16.599086] 32regs : 904.800 MB/sec [ 16.599103] xor: using function: arm4regs (1088.400 MB/sec) [ 16.599141] pinctrl core: initialized pinctrl subsystem [ 16.600030] NET: Registered protocol family 16 [ 16.600466] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 16.603181] Kirkwood: MV88F6281-A0, TCLK=166666667. [ 16.603212] Feroceon L2: Enabling L2 [ 16.603252] Feroceon L2: Cache support initialised. [ 16.604222] kirkwood_init: create proc tsinfo proc [ 16.604245] tsinfo: create proc tsinfo vendor successfully [ 16.604253] mv_usb_init 1 [ 16.604264] mv_usb_init 2 devnum = 0 [ 16.604275] init function mv_usb_init finished [ 16.604763] orion-ehci registered [ 16.819628] raid6: int32x1 gen() 101 MB/s [ 16.989389] raid6: int32x1 xor() 63 MB/s [ 17.159418] raid6: int32x2 gen() 133 MB/s [ 17.329143] raid6: int32x2 xor() 84 MB/s [ 17.499405] raid6: int32x4 gen() 132 MB/s [ 17.669270] raid6: int32x4 xor() 90 MB/s [ 17.839178] raid6: int32x8 gen() 121 MB/s [ 18.009150] raid6: int32x8 xor() 80 MB/s [ 18.009160] raid6: using algorithm int32x2 gen() 133 MB/s [ 18.009168] raid6: .... xor() 84 MB/s, rmw enabled [ 18.009175] raid6: using intx1 recovery algorithm [ 18.009477] vgaarb: loaded [ 18.009937] SCSI subsystem initialized [ 18.010777] usbcore: registered new interface driver usbfs [ 18.010909] usbcore: registered new interface driver hub [ 18.011022] usbcore: registered new device driver usb [ 18.011314] Linux video capture interface: v2.00 [ 18.014667] clocksource: Switched to clocksource orion_clocksource [ 18.014830] VFS: Disk quotas dquot_6.6.0 [ 18.014885] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 18.031128] NET: Registered protocol family 2 [ 18.031806] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 18.031867] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 18.031919] TCP: Hash tables configured (established 4096 bind 4096) [ 18.031982] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 18.032006] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 18.032198] NET: Registered protocol family 1 [ 18.032939] RPC: Registered named UNIX socket transport module. [ 18.032952] RPC: Registered udp transport module. [ 18.032960] RPC: Registered tcp transport module. [ 18.032967] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 18.033178] NetWinder Floating Point Emulator V0.97 (double precision) [ 18.033311] gpio-usb-probe-4b err=0 [ 18.033327] gpio-usb gpio-usb: USB GPIO's initialized [ 18.034567] futex hash table entries: 256 (order: -1, 3072 bytes) [ 18.035123] workingset: timestamp_bits=29 max_order=17 bucket_order=0 [ 18.035984] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 18.036354] ntfs: driver 2.1.32 [Flags: R/W]. [ 18.036410] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 18.036593] fuse init (API version 7.24) [ 18.036948] JFS: nTxBlock = 3982, nTxLock = 31858 [ 18.038553] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 18.043323] async_tx: api initialized (async) [ 18.043424] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 18.043443] io scheduler noop registered [ 18.043457] io scheduler deadline registered [ 18.043488] io scheduler cfq registered (default) [ 18.043708] mv_xor mv_xor.0: Marvell shared XOR driver [ 18.079770] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy ) [ 18.081611] mv_xor mv_xor.1: Marvell shared XOR driver [ 18.119722] mv_xor mv_xor.1: Marvell XOR (Registers Mode): ( xor cpy ) [ 18.127874] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 18.129452] console [ttyS0] disabled [ 18.149630] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A [ 18.750755] console [ttyS0] enabled [ 18.769323] brd: module loaded [ 18.779871] loop: module loaded [ 18.783460] sata_mv sata_mv.0: cannot get optional clkdev [ 18.788937] sata_mv sata_mv.0: slots 32 ports 2 [ 18.797735] scsi host0: sata_mv [ 18.801557] scsi host1: sata_mv [ 18.805093] ata1: SATA max UDMA/133 irq 21 [ 18.809412] ata2: SATA max UDMA/133 irq 21 [ 18.815138] m25p80 spi0.0: mx25l4005a (512 Kbytes) [ 18.820913] Creating 2 MTD partitions on "spi_flash": [ 18.825950] 0x000000000000-0x00000007d000 : "u-boot" [ 18.832223] 0x00000007e000-0x00000007f000 : "u-boot-env" [ 18.840275] tun: Universal TUN/TAP device driver, 1.6 [ 18.845306] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 18.852488] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 18.860791] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 18.877124] libphy: orion_mdio_bus: probed [ 18.881501] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 19.299071] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 19.319153] ata1.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 19.344571] ata1.00: hard resetting link [ 19.689851] ata1.01: hard resetting link [ 19.992457] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:8d:9a:81 [ 20.029888] ata1.02: hard resetting link [ 20.359848] ata1.03: hard resetting link [ 20.879105] ata1.03: ATA-9: ST2000DM006-2DM164, CC26, max UDMA/133 [ 20.885258] ata1.03: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 21.089112] ata1.03: configured for UDMA/133 [ 21.099155] ata1: EH complete [ 21.105644] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:d0:4b:8d:39:dd [ 21.114796] scsi 0:3:0:0: Direct-Access ATA ST2000DM006-2DM1 CC26 PQ: 0 ANSI: 5 [ 21.123142] PPP generic driver version 2.4.2 [ 21.127755] PPP Deflate Compression module registered [ 21.132895] PPP MPPE Compression module registered [ 21.137672] NET: Registered protocol family 24 [ 21.142429] usbcore: registered new interface driver rt2500usb [ 21.148465] usbcore: registered new interface driver rt73usb [ 21.154280] usbcore: registered new interface driver rt2800usb [ 21.160298] usbcore: registered new interface driver rtl8187 [ 21.166178] usbcore: registered new interface driver rtl8192cu [ 21.172439] fvdw1 disk index before get_sd_name = 0 [ 21.172443] device-name= sata_mv [ 21.172446] fvdw2 disk index after get_sd_name = 0 [ 21.172450] fvdw3 prefix[0]=s prefix[1]=d [ 21.172452] fvdw4 diskname = sda [ 21.173252] sd 0:3:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 21.173260] sd 0:3:0:0: [sda] 4096-byte physical blocks [ 21.173498] sd 0:3:0:0: [sda] Write Protect is off [ 21.173612] sd 0:3:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 21.222207] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 21.229900] usbcore: registered new interface driver pegasus [ 21.235831] usbcore: registered new interface driver asix [ 21.241265] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 21.243885] sd 0:3:0:0: [sda] Attached SCSI disk [ 21.254865] usbcore: registered new interface driver ax88179_178a [ 21.261232] usbcore: registered new interface driver cdc_ether [ 21.267244] usbcore: registered new interface driver net1080 [ 21.273040] usbcore: registered new interface driver plusb [ 21.278711] usbcore: registered new interface driver cdc_subset [ 21.284808] usbcore: registered new interface driver zaurus [ 21.290617] usbcore: registered new interface driver ipheth [ 21.296389] usbcore: registered new interface driver cdc_ncm [ 21.302894] aoe: cannot create debugfs directory [ 21.307872] aoe: AoE v85 initialised. [ 21.659072] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 21.666006] ata2.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 21.682919] ata2.00: hard resetting link [ 22.009820] ata2.01: hard resetting link [ 22.319066] rtc-mv rtc-mv: internal RTC not ticking [ 22.324378] i2c /dev entries driver [ 22.329105] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write [ 22.336331] uvcvideo: Unable to create debugfs directory [ 22.342478] ata2.02: hard resetting link [ 22.347207] usbcore: registered new interface driver uvcvideo [ 22.353285] USB Video Class driver (1.1.1) [ 22.357376] gspca_main: v2.14.0 registered [ 22.361641] usbcore: registered new interface driver Philips webcam [ 22.378279] md: linear personality registered for level -1 [ 22.384023] md: raid0 personality registered for level 0 [ 22.389369] md: raid1 personality registered for level 1 [ 22.394661] md: raid10 personality registered for level 10 [ 22.400410] md: raid6 personality registered for level 6 [ 22.405696] md: raid5 personality registered for level 5 [ 22.411126] md: raid4 personality registered for level 4 [ 22.416660] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 22.425386] device-mapper: multipath: version 1.11.0 loaded [ 22.430984] device-mapper: multipath round-robin: version 1.1.0 loaded [ 22.437488] device-mapper: multipath queue-length: version 0.2.0 loaded [ 22.444112] device-mapper: multipath service-time: version 0.3.0 loaded [ 22.450797] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 22.456867] device-mapper: raid: Loading target version 1.7.0 [ 22.465786] Netfilter messages via NETLINK v0.30. [ 22.471407] nfnl_acct: registering with nfnetlink. [ 22.476213] nf_conntrack version 0.5.0 (7964 buckets, 31856 max) [ 22.482947] ipip: IPv4 over IPv4 tunneling driver [ 22.488680] ip_tables: (C) 2000-2006 Netfilter Core Team [ 22.494365] NET: Registered protocol family 10 [ 22.500125] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 22.505736] sit: IPv6 over IPv4 tunneling driver [ 22.511289] NET: Registered protocol family 17 [ 22.515766] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 22.528510] Bridge firewalling registered [ 22.532687] NET: Registered protocol family 5 [ 22.538225] netpoll: netconsole: local port 6666 [ 22.543019] netpoll: netconsole: local IPv4 address 192.168.0.188 [ 22.549162] netpoll: netconsole: interface 'eth0' [ 22.553845] netpoll: netconsole: remote port 6666 [ 22.558529] netpoll: netconsole: remote IPv4 address 192.168.0.177 [ 22.564960] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff [ 22.571935] netpoll: netconsole: device eth0 not up yet, forcing it [ 22.669855] ata2.03: hard resetting link [ 23.010038] ata2: EH complete [ 23.668573] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.656703] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 26.666528] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 26.676567] console [netcon0] enabled [ 26.680292] netconsole: network logging started [ 26.685313] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 26.692401] hctosys: unable to open rtc device (rtc0) [ 26.697791] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 26.707047] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem [ 27.609342] EXT4-fs (sda7): recovery complete [ 27.639134] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 27.646807] VFS: Mounted root (ext3 filesystem) on device 8:7. [ 27.653234] Freeing unused kernel memory: 200K (c08e0000 - c0912000) [ 27.659600] This architecture does not have kernel memory protection. [ 27.898934] EXT4-fs (sda7): re-mounted. Opts: (null) [ 28.523003] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem [ 28.819354] EXT4-fs (sda5): warning: checktime reached, running e2fsck is recommended [ 28.859482] EXT4-fs (sda5): 1 orphan inode deleted [ 28.864278] EXT4-fs (sda5): recovery complete [ 29.079130] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 29.157128] random: mkswap urandom read with 124 bits of entropy available [ 29.214026] Adding 514076k swap on /dev/sda3. Priority:-1 extents:1 across:514076k [ 29.369900] random: nonblocking pool is initialized [ 29.632923] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 29.640271] ehci-orion: EHCI orion driver [ 29.644378] orion-ehci orion-ehci.0: EHCI Host Controller [ 29.649869] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 29.657562] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 29.679071] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 29.685134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 29.691943] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 29.699177] usb usb1: Product: EHCI Host Controller [ 29.704054] usb usb1: Manufacturer: Linux 4.6.6 ehci_hcd [ 29.709378] usb usb1: SerialNumber: orion-ehci.0 [ 29.714574] hub 1-0:1.0: USB hub found [ 29.718359] hub 1-0:1.0: 1 port detected [ 29.736856] usbcore: registered new interface driver usb-storage [ 29.754705] usbcore: registered new interface driver usblp [ 29.786944] Loading iSCSI transport class v2.0-870. [ 29.796987] iscsi: registered transport (tcp) [ 30.039135] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 30.199599] usb 1-1: New USB device found, idVendor=0424, idProduct=2512 [ 30.206314] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 30.229764] hub 1-1:1.0: USB hub found [ 30.239042] hub 1-1:1.0: 2 ports detected [ 41.626174] udevd (1022): /proc/1022/oom_adj is deprecated, please use /proc/1022/oom_score_adj instead. [ 41.635791] udev: starting version 130 [ 51.528919] EXT4-fs (sda8): warning: checktime reached, running e2fsck is recommended [ 52.171372] EXT4-fs (sda8): recovery complete [ 52.239148] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr,acl,nodelalloc

Now is still at last string "[ 52.239148] EXT4-fs (sda8): mounted filesys......"

by **fvdw** » Sun Apr 21, 2019 4:20 pm

oke it seems to hang on mounting sda8

Lets try following
load standalone kernel and connect with telnet
give this command to reformat sda8

Code: Select all: mke2fs-ext3 -m 1 -j /dev/sda8

If it mentions that it already contains a file system proceed to replace it

After that shutdown the nas

Code: Select all: poweroff -f

and repeat procedure with uboot console

by **Draftmancorp** » Sun Apr 21, 2019 4:51 pm

ok, first step here:

Code: Select all: fvdw-sta-kirkwood login: root Password: root@fvdw-sta-kirkwood:/ # mke2fs-ext3 -m 1 -j /dev/sda8 mke2fs 1.41.14 (22-Dec-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 121896960 inodes, 487556685 blocks 4875566 blocks (1.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 14880 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 31 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. root@fvdw-sta-kirkwood:/ # poweroff -f

Here the uboot procedure after that:

Code: Select all: provided by fvdw waiting for u-boot.. starting u-boot net console click on window and press enter Marvell>> setenv bootargs console=ttyS0,115200 netconsole=6666@${ipaddr}/,6666@${serverip}/ root=/dev/sda7 setenv bootargs console=ttyS0,115200 netconsole=6666@${ipaddr}/,6666@${serverip}/ root=/dev/sda7 Marvell>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 netconsole=6666@192.168.0.188/,6666@192.168.0.177/ root=/dev/sda7 Marvell>> ide reset ide reset Reset IDE: Marvell Serial ATA Adapter Integrated Sata device found Port Multiplier found @ 0 0. Vendor: 11ab ports: 4 [0 0 3]: Enable DMA mode Device 3 @ 0 0 3: Model: ST2000DM006-2DM164 Firm: CC26 Ser#: Z4ZATWA1 Type: Hard Disk Supports 48-bit addressing Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512) Port Multiplier found @ 0 1. Vendor: 11ab ports: 4 Marvell>> tftpboot 0x800000 firmware/kirkwood/UIMAGE-466-KIRKWOOD-7 tftpboot 0x800000 firmware/kirkwood/UIMAGE-466-KIRKWOOD-7 Using egiga0 device TFTP from server 192.168.0.177; our IP address is 192.168.0.188 Filename 'firmware/kirkwood/UIMAGE-466-KIRKWOOD-7'. Load address: 0x800000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# done Bytes transferred = 4887024 (4a91f0 hex) Marvell>> bootm bootm ## Booting image at 00800000 ... Image Name: linux-4.6.6-kirkwood-fvdw Created: 2017-05-07 10:19:57 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4886960 Bytes = 4.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.6 (root@fvdwsl-5big2.local) (gcc version 4.9.3 (GCC) ) #7 PREEMPT Sun May 7 11:50:52 CEST 2017 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: LaCie 5Big Network v2 [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.0.188/,6666@192.168.0.177/ root=/dev/sda7 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 509736K/524288K available (7113K kernel code, 328K rwdata, 1940K rodata, 200K init, 395K bss, 14552K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc08df8e8 (9055 kB) [ 0.000000] .init : 0xc08e0000 - 0xc0912000 ( 200 kB) [ 0.000000] .data : 0xc0912000 - 0xc0964320 ( 329 kB) [ 0.000000] .bss : 0xc0964320 - 0xc09c7004 ( 396 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:114 [ 0.000000] Switching to timer-based delay loop, resolution 6ns [ 0.000009] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.562536] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.562815] Console: colour dummy device 80x30 [ 0.562844] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 0.562863] pid_max: default: 32768 minimum: 301 [ 0.563007] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.563026] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.563610] CPU: Testing write buffer coherency: ok [ 0.563973] Setting up static identity map for 0x81e0 - 0x8238 [ 0.567020] VFP support v0.3: not present [ 0.567365] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.567510] xor: measuring software checksum speed [ 0.662887] arm4regs : 1088.400 MB/sec [ 0.762612] 8regs : 653.600 MB/sec [ 0.862611] 32regs : 904.800 MB/sec [ 0.862628] xor: using function: arm4regs (1088.400 MB/sec) [ 0.862669] pinctrl core: initialized pinctrl subsystem [ 0.863551] NET: Registered protocol family 16 [ 0.863987] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.866693] Kirkwood: MV88F6281-A0, TCLK=166666667. [ 0.866724] Feroceon L2: Enabling L2 [ 0.866764] Feroceon L2: Cache support initialised. [ 0.867737] kirkwood_init: create proc tsinfo proc [ 0.867759] tsinfo: create proc tsinfo vendor successfully [ 0.867767] mv_usb_init 1 [ 0.867779] mv_usb_init 2 devnum = 0 [ 0.867789] init function mv_usb_init finished [ 0.868275] orion-ehci registered [ 1.083149] raid6: int32x1 gen() 101 MB/s [ 1.252911] raid6: int32x1 xor() 63 MB/s [ 1.422946] raid6: int32x2 gen() 133 MB/s [ 1.592669] raid6: int32x2 xor() 84 MB/s [ 1.762667] raid6: int32x4 gen() 133 MB/s [ 1.932793] raid6: int32x4 xor() 90 MB/s [ 2.102677] raid6: int32x8 gen() 121 MB/s [ 2.272678] raid6: int32x8 xor() 80 MB/s [ 2.272688] raid6: using algorithm int32x2 gen() 133 MB/s [ 2.272696] raid6: .... xor() 84 MB/s, rmw enabled [ 2.272704] raid6: using intx1 recovery algorithm [ 2.273010] vgaarb: loaded [ 2.273478] SCSI subsystem initialized [ 2.274324] usbcore: registered new interface driver usbfs [ 2.274459] usbcore: registered new interface driver hub [ 2.274578] usbcore: registered new device driver usb [ 2.274872] Linux video capture interface: v2.00 [ 2.278211] clocksource: Switched to clocksource orion_clocksource [ 2.278373] VFS: Disk quotas dquot_6.6.0 [ 2.278430] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.294687] NET: Registered protocol family 2 [ 2.295362] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 2.295422] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 2.295474] TCP: Hash tables configured (established 4096 bind 4096) [ 2.295538] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 2.295562] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 2.295744] NET: Registered protocol family 1 [ 2.296480] RPC: Registered named UNIX socket transport module. [ 2.296492] RPC: Registered udp transport module. [ 2.296500] RPC: Registered tcp transport module. [ 2.296507] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.296716] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.296853] gpio-usb-probe-4b err=0 [ 2.296869] gpio-usb gpio-usb: USB GPIO's initialized [ 2.298124] futex hash table entries: 256 (order: -1, 3072 bytes) [ 2.298678] workingset: timestamp_bits=29 max_order=17 bucket_order=0 [ 2.299543] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 2.299913] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.299968] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 2.300151] fuse init (API version 7.24) [ 2.300507] JFS: nTxBlock = 3982, nTxLock = 31858 [ 2.302101] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 2.306874] async_tx: api initialized (async) [ 2.306974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.306992] io scheduler noop registered [ 2.307007] io scheduler deadline registered [ 2.307038] io scheduler cfq registered (default) [ 2.307258] mv_xor mv_xor.0: Marvell shared XOR driver [ 2.343280] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy ) [ 2.345115] mv_xor mv_xor.1: Marvell shared XOR driver [ 2.383241] mv_xor mv_xor.1: Marvell XOR (Registers Mode): ( xor cpy ) [ 2.391407] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.393004] console [ttyS0] disabled [ 2.413176] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A [ 3.014307] console [ttyS0] enabled [ 3.032915] brd: module loaded [ 3.043348] loop: module loaded [ 3.046940] sata_mv sata_mv.0: cannot get optional clkdev [ 3.052412] sata_mv sata_mv.0: slots 32 ports 2 [ 3.061395] scsi host0: sata_mv [ 3.065292] scsi host1: sata_mv [ 3.068830] ata1: SATA max UDMA/133 irq 21 [ 3.073156] ata2: SATA max UDMA/133 irq 21 [ 3.078882] m25p80 spi0.0: mx25l4005a (512 Kbytes) [ 3.084653] Creating 2 MTD partitions on "spi_flash": [ 3.089692] 0x000000000000-0x00000007d000 : "u-boot" [ 3.095967] 0x00000007e000-0x00000007f000 : "u-boot-env" [ 3.104016] tun: Universal TUN/TAP device driver, 1.6 [ 3.109050] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 3.116242] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 3.124556] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 3.140912] libphy: orion_mdio_bus: probed [ 3.145292] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 3.562595] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 3.582677] ata1.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 3.608096] ata1.00: hard resetting link [ 3.953374] ata1.01: hard resetting link [ 4.255984] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:8d:9a:81 [ 4.293412] ata1.02: hard resetting link [ 4.623370] ata1.03: hard resetting link [ 5.142629] ata1.03: ATA-9: ST2000DM006-2DM164, CC26, max UDMA/133 [ 5.148784] ata1.03: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.352637] ata1.03: configured for UDMA/133 [ 5.362678] ata1: EH complete [ 5.369163] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:d0:4b:8d:39:dd [ 5.378313] scsi 0:3:0:0: Direct-Access ATA ST2000DM006-2DM1 CC26 PQ: 0 ANSI: 5 [ 5.386661] PPP generic driver version 2.4.2 [ 5.391283] PPP Deflate Compression module registered [ 5.396434] PPP MPPE Compression module registered [ 5.401215] NET: Registered protocol family 24 [ 5.405974] usbcore: registered new interface driver rt2500usb [ 5.412008] usbcore: registered new interface driver rt73usb [ 5.417829] usbcore: registered new interface driver rt2800usb [ 5.423849] usbcore: registered new interface driver rtl8187 [ 5.429727] usbcore: registered new interface driver rtl8192cu [ 5.435993] fvdw1 disk index before get_sd_name = 0 [ 5.435997] device-name= sata_mv [ 5.436001] fvdw2 disk index after get_sd_name = 0 [ 5.436004] fvdw3 prefix[0]=s prefix[1]=d [ 5.436007] fvdw4 diskname = sda [ 5.436805] sd 0:3:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 5.436814] sd 0:3:0:0: [sda] 4096-byte physical blocks [ 5.437051] sd 0:3:0:0: [sda] Write Protect is off [ 5.437164] sd 0:3:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.485837] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 5.493430] usbcore: registered new interface driver pegasus [ 5.499363] usbcore: registered new interface driver asix [ 5.504802] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 5.507429] sd 0:3:0:0: [sda] Attached SCSI disk [ 5.518411] usbcore: registered new interface driver ax88179_178a [ 5.524784] usbcore: registered new interface driver cdc_ether [ 5.530798] usbcore: registered new interface driver net1080 [ 5.536594] usbcore: registered new interface driver plusb [ 5.542263] usbcore: registered new interface driver cdc_subset [ 5.548359] usbcore: registered new interface driver zaurus [ 5.554170] usbcore: registered new interface driver ipheth [ 5.559942] usbcore: registered new interface driver cdc_ncm [ 5.566451] aoe: cannot create debugfs directory [ 5.571432] aoe: AoE v85 initialised. [ 5.922596] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 5.929528] ata2.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 5.946438] ata2.00: hard resetting link [ 6.273342] ata2.01: hard resetting link [ 6.582590] rtc-mv rtc-mv: internal RTC not ticking [ 6.587902] i2c /dev entries driver [ 6.592638] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write [ 6.599855] uvcvideo: Unable to create debugfs directory [ 6.606002] ata2.02: hard resetting link [ 6.610734] usbcore: registered new interface driver uvcvideo [ 6.616810] USB Video Class driver (1.1.1) [ 6.620902] gspca_main: v2.14.0 registered [ 6.625168] usbcore: registered new interface driver Philips webcam [ 6.641797] md: linear personality registered for level -1 [ 6.647535] md: raid0 personality registered for level 0 [ 6.652876] md: raid1 personality registered for level 1 [ 6.658170] md: raid10 personality registered for level 10 [ 6.663919] md: raid6 personality registered for level 6 [ 6.669205] md: raid5 personality registered for level 5 [ 6.674633] md: raid4 personality registered for level 4 [ 6.680158] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 6.688885] device-mapper: multipath: version 1.11.0 loaded [ 6.694485] device-mapper: multipath round-robin: version 1.1.0 loaded [ 6.700987] device-mapper: multipath queue-length: version 0.2.0 loaded [ 6.707612] device-mapper: multipath service-time: version 0.3.0 loaded [ 6.714291] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 6.720360] device-mapper: raid: Loading target version 1.7.0 [ 6.729304] Netfilter messages via NETLINK v0.30. [ 6.734930] nfnl_acct: registering with nfnetlink. [ 6.739731] nf_conntrack version 0.5.0 (7964 buckets, 31856 max) [ 6.746468] ipip: IPv4 over IPv4 tunneling driver [ 6.752204] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.757894] NET: Registered protocol family 10 [ 6.763639] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.769247] sit: IPv6 over IPv4 tunneling driver [ 6.774808] NET: Registered protocol family 17 [ 6.779284] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 6.792027] Bridge firewalling registered [ 6.796208] NET: Registered protocol family 5 [ 6.801748] netpoll: netconsole: local port 6666 [ 6.806548] netpoll: netconsole: local IPv4 address 192.168.0.188 [ 6.812689] netpoll: netconsole: interface 'eth0' [ 6.817372] netpoll: netconsole: remote port 6666 [ 6.822055] netpoll: netconsole: remote IPv4 address 192.168.0.177 [ 6.828483] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff [ 6.835460] netpoll: netconsole: device eth0 not up yet, forcing it [ 6.933378] ata2.03: hard resetting link [ 7.273563] ata2: EH complete [ 7.932099] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.906703] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 10.916525] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.926559] console [netcon0] enabled [ 10.930217] netconsole: network logging started [ 10.935296] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 10.942411] hctosys: unable to open rtc device (rtc0) [ 10.947895] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 10.957031] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem [ 11.482868] EXT4-fs (sda7): recovery complete [ 11.512656] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 11.520332] VFS: Mounted root (ext3 filesystem) on device 8:7. [ 11.526760] Freeing unused kernel memory: 200K (c08e0000 - c0912000) [ 11.533125] This architecture does not have kernel memory protection. [ 11.811623] EXT4-fs (sda7): re-mounted. Opts: (null) [ 12.427993] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem [ 12.742874] EXT4-fs (sda5): warning: checktime reached, running e2fsck is recommended [ 12.782960] EXT4-fs (sda5): 1 orphan inode deleted [ 12.787760] EXT4-fs (sda5): recovery complete [ 13.002661] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 13.077958] random: mkswap urandom read with 104 bits of entropy available [ 13.126399] Adding 514076k swap on /dev/sda3. Priority:-1 extents:1 across:514076k [ 13.569227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 13.576586] ehci-orion: EHCI orion driver [ 13.580699] orion-ehci orion-ehci.0: EHCI Host Controller [ 13.586191] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 13.593943] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 13.612595] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 13.618654] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 13.625456] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.632689] usb usb1: Product: EHCI Host Controller [ 13.637566] usb usb1: Manufacturer: Linux 4.6.6 ehci_hcd [ 13.642891] usb usb1: SerialNumber: orion-ehci.0 [ 13.648094] hub 1-0:1.0: USB hub found [ 13.651882] hub 1-0:1.0: 1 port detected [ 13.670661] usbcore: registered new interface driver usb-storage [ 13.688654] usbcore: registered new interface driver usblp [ 13.720991] Loading iSCSI transport class v2.0-870. [ 13.731052] iscsi: registered transport (tcp) [ 13.972666] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 14.133098] usb 1-1: New USB device found, idVendor=0424, idProduct=2512 [ 14.139810] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 14.162531] hub 1-1:1.0: USB hub found [ 14.172106] hub 1-1:1.0: 2 ports detected [ 14.453196] random: nonblocking pool is initialized [ 25.563985] udevd (1021): /proc/1021/oom_adj is deprecated, please use /proc/1021/oom_score_adj instead. [ 25.573591] udev: starting version 130 [ 35.340306] EXT4-fs (sda8): mounting ext3 file system using the ext4 subsystem [ 35.436040] EXT4-fs (sda8): warning: checktime reached, running e2fsck is recommended [ 35.547591] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr,acl

by **fvdw** » Sun Apr 21, 2019 5:16 pm

Can you load standalone kernel and connect with telnet mount sda7 on /sda7 and post output of cat /sda7/boot.log

As next trial I am going to make a seperate rcS file used at boot that will only activate an ssh server so we can talk to the nas when booting from harddisk to investigate further what going on there

plugout.net

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Fail to get an IP from DHCP server after installing fvdw-sl

Who is online