Firmware install on Lacie 5Big Network vs1

[Basajaun]

The NAS boot, log in but i don't see boot.log

Thanks

[Jocko]

Indeed, boot.log file is on sda7 partition and you need to mount it first.

So do

Code: Select all

mkdir /sda7
mount /dev/sda7 /sda7
cat /sda7/boot.log

Otherwise there is another file with install information, post also its content

Code: Select all

mkdir /sda5
mount /dev/sda5 /sda5
cat /sda5/installer.log

[Basajaun]

Hi,

here you are the files.

boot.log

Code: Select all

root@(none):/ # cat /sda7/boot.log
start boot log
detect and set platform
5big1
5big1
UIMAGE-3142-5BIG1-11
Current kernel: 3.14.2 #11 Mon Feb 27 18:10:55 CET 2017
5big1
 mount dev/pts
update dev nodes
booting using  root file system...
make dev node for buttons...
make dev node for tun device...
enable IP forwarding...
start buttons control daemon
device = 5big1
source = buttons-nwsp2
buttons-nwsp2 daemon started
Fri Jun  8 09:37:44 UTC 2018
create temporary passwd file
run udevstart to update dev nodes when necessary
inserting kernel modules:
create temporary group file
configure loopback network interface
setting reboot and standby
5big1
rebootd-isp1
5big1
standbyd-isp1
start fan
starting php based setup routines step 1
 * Initialize the volatile db file...    [ OK ]
 * Starting udevd...                                     [ OK ]
 * Finishing restore RAID devices...     [ OK ]
 * Found database configuration file...  [ OK ]
 * Updating Disks database...                    [ OK ]
 * Starting mount of volumes...
   - Mounting volume Vol-A:  [ OK ]
 * Finishing mount of volumes...                 [ OK ]
 * Generating Hosts File...                      [ OK ]
 * Configuring System Hostname...                [ OK ] 
 * Configuring LAN interface...                  [ OK ]
 * Initializing Timezone...                      [ OK ]
 * Starting web server...                                [ OK ]
 * Starting mount of internal USB ...
 * Finishing mount internal USB ...      [ OK ]
 * Configuring Disks...                                  [ OK ]
 * Configuring Samba...                                  [ OK ]
 * Configuring System Users...
        Root password: use default password
        Set users, linux and samba accounts      [ OK ]
 * Starting Fvdw-sl Discovery Daemon...  [ OK ]
start rpcbind service
starting php based setup routines step 2
 * Starting dropbear...                                  [ OK ]
 * Kill temporary dropbear...                    [ OK ]
starting php based setup routines step 3
 * Starting daemon update Hosts File...  [ OK ]
 * Starting mount of remote shares...
 * Finishing mount shares...                     [ OK ]
starting php based setup routines step banner


*** fvdw-sl NAS firmware
    This is fvdw-sl version: fvdw-sl 17.0
    built on: May 28 2017

    LAN IP address: 169.254.5.148 (static - random)

    Port configuration:

    LAN   -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
move smbd en nmbd db files away from ram disk to prevent hanging samba server
LED settings
else loop1 finished
rcS finished
root@(none):/ #

installer.log

Code: Select all

root@(none):/ # cat /sda5/installer.log
fvdw-sl-installer log
tftpd ip address 172.16.60.19
getting required programs from tftp server 172.16.60.19
Dialog installed
xterm installed
mke2fs-ext3 present
gdisk present
Start fvdw-sl firmware installer version 3.1

selected nas type 5big1 platform orion
selected disk /dev/sda
gpt support bootloader selected no
selected partion table type msdos
Deleting old msdos partiton table
deleting msdos partition succeeded

create new partiton table
create ms-dos partiton table
max cylinder 243201
ms-dos partiton scheme disk last cylinder 243200 (-1)
Device contains neither a valid DOS partition table, nor Sun, SGI, OSF or GPT disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that the previous content
won't be recoverable.


The number of cylinders for this disk is set to 243201.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (1-243201, default 1): Last cylinder or +size or +sizeM or +sizeK (9-243201, default 243201):
Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (1-243201, default 1): Last cylinder or +size or +sizeM or +sizeK (73-243201, default 243201):
Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Partition number (1-4): First cylinder (1-243201, default 1): Last cylinder or +size or +sizeM or +sizeK (137-243201, default 243201):
Command (m for help): Partition number (1-4): Hex code (type L to list codes): Changed system type of partition 3 to 82 (Linux swap)

Command (m for help): Command action
   e   extended
   p   primary partition (1-4)
Selected partition 4
First cylinder (1-243201, default 1): Last cylinder or +size or +sizeM or +sizeK (201-243201, default 243201):
Command (m for help): First cylinder (201-243200, default 201): Last cylinder or +size or +sizeM or +sizeK (209-243200, default 243200):
Command (m for help): First cylinder (201-243200, default 201): Last cylinder or +size or +sizeM or +sizeK (321-243200, default 243200):
Command (m for help): First cylinder (201-243200, default 201): Last cylinder or +size or +sizeM or +sizeK (337-243200, default 243200):
Command (m for help): First cylinder (201-243200, default 201): Last cylinder or +size or +sizeM or +sizeK (409-243200, default 243200):
Command (m for help): The partition table has been altered.
Calling ioctl() to re-read partition table
creating ms-dos partiton table succeeded
format partition 5
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
52304 inodes, 208845 blocks
2088 blocks (1.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=213909504
7 block groups
32768 blocks per group, 32768 fragments per group
7472 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840

Writing inode tables: done                           
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 38 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
formatting sda5 succeeded
writing kernel to partition 6
mounting sda 5 succeeded
getting kernel from tftp server
writing kernel to partition 6
3967+1 records in
3967+1 records out
2031296 bytes (1.9MB) copied, 0.238754 seconds, 8.1MB/s
writing kernel to partition 6 succeeded
Getting firmware image from tftp server
firmware disk image uploaded succesfully\n
Unpacking firmware image from archive
firmware disk image extracted succesfully\n
Adapting firmware image for 5big1\n
Transfer of firmware correction from tfp server succeeded, starting pacthing of firmware image
mounting firmware image succeeded
./
./etc/
./etc/init.d/
./etc/init.d/insert-modules.5big1
./etc/platform
./lib/
./lib/modules/
./lib/modules/3.14.2/
./lib/modules/3.14.2/sm_ftl.ko
./lib/modules/3.14.2/jedec_probe.ko
./lib/modules/3.14.2/pwc.ko
./lib/modules/3.14.2/videobuf-core.ko
./lib/modules/3.14.2/dm-mirror.ko
./lib/modules/3.14.2/multipath.ko
./lib/modules/3.14.2/rtl8187.ko
./lib/modules/3.14.2/jfs.ko
./lib/modules/3.14.2/xt_nat.ko
./lib/modules/3.14.2/raid1.ko
./lib/modules/3.14.2/ehci-pci.ko
./lib/modules/3.14.2/xt_mark.ko
./lib/modules/3.14.2/isofs.ko
./lib/modules/3.14.2/dm-round-robin.ko
./lib/modules/3.14.2/eeprom_93cx6.ko
./lib/modules/3.14.2/nfsv3.ko
./lib/modules/3.14.2/nf_conntrack_pptp.ko
./lib/modules/3.14.2/ppp_deflate.ko
./lib/modules/3.14.2/plat-ram.ko
./lib/modules/3.14.2/gspca_spca1528.ko
./lib/modules/3.14.2/dns_resolver.ko
./lib/modules/3.14.2/usb_f_mass_storage.ko
./lib/modules/3.14.2/xt_limit.ko
./lib/modules/3.14.2/raid10.ko
./lib/modules/3.14.2/cmdlinepart.ko
./lib/modules/3.14.2/async_raid6_recov.ko
./lib/modules/3.14.2/rt2x00usb.ko
./lib/modules/3.14.2/cfi_cmdset_0002.ko
./lib/modules/3.14.2/usblp.ko
./lib/modules/3.14.2/caif_socket.ko
./lib/modules/3.14.2/nf_defrag_ipv4.ko
./lib/modules/3.14.2/llc.ko
./lib/modules/3.14.2/nf_nat_ipv4.ko
./lib/modules/3.14.2/nand_ecc.ko
./lib/modules/3.14.2/ip6_tables.ko
./lib/modules/3.14.2/g_ether.ko
./lib/modules/3.14.2/v4l2-common.ko
./lib/modules/3.14.2/nf_defrag_ipv6.ko
./lib/modules/3.14.2/ftdi-elan.ko
./lib/modules/3.14.2/nf_conntrack_broadcast.ko
./lib/modules/3.14.2/nf_nat_tftp.ko
./lib/modules/3.14.2/ipt_REJECT.ko
./lib/modules/3.14.2/gspca_sn9c2028.ko
./lib/modules/3.14.2/modules.builtin
./lib/modules/3.14.2/xt_REDIRECT.ko
./lib/modules/3.14.2/zlib_deflate.ko
./lib/modules/3.14.2/scsi_tgt.ko
./lib/modules/3.14.2/xt_conntrack.ko
./lib/modules/3.14.2/rt2x00lib.ko
./lib/modules/3.14.2/iscsi_tcp.ko
./lib/modules/3.14.2/serio.ko
./lib/modules/3.14.2/lzo_compress.ko
./lib/modules/3.14.2/rtlwifi.ko
./lib/modules/3.14.2/rt2800usb.ko
./lib/modules/3.14.2/cuse.ko
./lib/modules/3.14.2/nf_conntrack_snmp.ko
./lib/modules/3.14.2/cifs.ko
./lib/modules/3.14.2/async_tx.ko
./lib/modules/3.14.2/usb_f_rndis.ko
./lib/modules/3.14.2/oid_registry.ko
./lib/modules/3.14.2/ftdi_sio.ko
./lib/modules/3.14.2/ppp_generic.ko
./lib/modules/3.14.2/pegasus.ko
./lib/modules/3.14.2/exportfs.ko
./lib/modules/3.14.2/ipt_MASQUERADE.ko
./lib/modules/3.14.2/p8022.ko
./lib/modules/3.14.2/async_memcpy.ko
./lib/modules/3.14.2/dm-raid.ko
./lib/modules/3.14.2/cfi_cmdset_0001.ko
./lib/modules/3.14.2/ipddp.ko
./lib/modules/3.14.2/xt_iprange.ko
./lib/modules/3.14.2/xfrm6_mode_transport.ko
./lib/modules/3.14.2/mac80211.ko
./lib/modules/3.14.2/nfsd.ko
./lib/modules/3.14.2/auth_rpcgss.ko
./lib/modules/3.14.2/pcbc.ko
./lib/modules/3.14.2/dm-queue-length.ko
./lib/modules/3.14.2/raid_class.ko
./lib/modules/3.14.2/nf_conntrack_ipv4.ko
./lib/modules/3.14.2/rtc-s35390a.ko
./lib/modules/3.14.2/nand_ids.ko
./lib/modules/3.14.2/usb-storage.ko
./lib/modules/3.14.2/sg.ko
./lib/modules/3.14.2/uvcvideo.ko
./lib/modules/3.14.2/caif.ko
./lib/modules/3.14.2/cfi_cmdset_0020.ko
./lib/modules/3.14.2/nf_nat_ipv6.ko
./lib/modules/3.14.2/dm-crypt.ko
./lib/modules/3.14.2/nf_nat_ftp.ko
./lib/modules/3.14.2/ipv6.ko
./lib/modules/3.14.2/hid.ko
./lib/modules/3.14.2/pl2303.ko
./lib/modules/3.14.2/dm-multipath.ko
./lib/modules/3.14.2/ip6t_NPT.ko
./lib/modules/3.14.2/rtc-pcf8563.ko
./lib/modules/3.14.2/nf_conntrack.ko
./lib/modules/3.14.2/rtl8192c-common.ko
./lib/modules/3.14.2/xt_connlimit.ko
./lib/modules/3.14.2/nfs.ko
./lib/modules/3.14.2/pppoe.ko
./lib/modules/3.14.2/cdrom.ko
./lib/modules/3.14.2/libiscsi.ko
./lib/modules/3.14.2/videobuf2-memops.ko
./lib/modules/3.14.2/nand.ko
./lib/modules/3.14.2/iptable_mangle.ko
./lib/modules/3.14.2/libcomposite.ko
./lib/modules/3.14.2/xfrm6_mode_beet.ko
./lib/modules/3.14.2/modules.order
./lib/modules/3.14.2/ums-sddr55.ko
./lib/modules/3.14.2/nf_nat_proto_gre.ko
./lib/modules/3.14.2/ip_tables.ko
./lib/modules/3.14.2/net1080.ko
./lib/modules/3.14.2/ax88179_178a.ko
./lib/modules/3.14.2/cdc_ether.ko
./lib/modules/3.14.2/reiserfs.ko
./lib/modules/3.14.2/mii.ko
./lib/modules/3.14.2/cfi_probe.ko
./lib/modules/3.14.2/xt_tcpudp.ko
./lib/modules/3.14.2/fuse.ko
./lib/modules/3.14.2/rt2800lib.ko
./lib/modules/3.14.2/md-mod.ko
./lib/modules/3.14.2/ehci-orion.ko
./lib/modules/3.14.2/serport.ko
./lib/modules/3.14.2/configfs.ko
./lib/modules/3.14.2/nf_nat.ko
./lib/modules/3.14.2/gen_probe.ko
./lib/modules/3.14.2/scsi_transport_iscsi.ko
./lib/modules/3.14.2/g_mass_storage.ko
./lib/modules/3.14.2/ehci-hcd.ko
./lib/modules/3.14.2/u_ether.ko
./lib/modules/3.14.2/ip6table_filter.ko
./lib/modules/3.14.2/videodev.ko
./lib/modules/3.14.2/gspca_sonixb.ko
./lib/modules/3.14.2/usbserial.ko
./lib/modules/3.14.2/ts_fsm.ko
./lib/modules/3.14.2/ppp_mppe.ko
./lib/modules/3.14.2/usbnet.ko
./lib/modules/3.14.2/dm-region-hash.ko
./lib/modules/3.14.2/chnl_net.ko
./lib/modules/3.14.2/ums-jumpshot.ko
./lib/modules/3.14.2/zr364xx.ko
./lib/modules/3.14.2/zlib_inflate.ko
./lib/modules/3.14.2/dm-bufio.ko
./lib/modules/3.14.2/dm-log-userspace.ko
./lib/modules/3.14.2/gspca_sonixj.ko
./lib/modules/3.14.2/oxu210hp-hcd.ko
./lib/modules/3.14.2/mtd.ko
./lib/modules/3.14.2/sit.ko
./lib/modules/3.14.2/zaurus.ko
./lib/modules/3.14.2/gspca_main.ko
./lib/modules/3.14.2/xt_string.ko
./lib/modules/3.14.2/linear.ko
./lib/modules/3.14.2/videobuf-vmalloc.ko
./lib/modules/3.14.2/nfs_acl.ko
./lib/modules/3.14.2/pci-stub.ko
./lib/modules/3.14.2/squashfs.ko
./lib/modules/3.14.2/raid0.ko
./lib/modules/3.14.2/iptable_filter.ko
./lib/modules/3.14.2/raid456.ko
./lib/modules/3.14.2/evdev.ko
./lib/modules/3.14.2/hid-generic.ko
./lib/modules/3.14.2/xt_connmark.ko
./lib/modules/3.14.2/xt_addrtype.ko
./lib/modules/3.14.2/nfsv2.ko
./lib/modules/3.14.2/nf_conntrack_h323.ko
./lib/modules/3.14.2/async_xor.ko
./lib/modules/3.14.2/xt_LED.ko
./lib/modules/3.14.2/xfs.ko
./lib/modules/3.14.2/ums-freecom.ko
./lib/modules/3.14.2/xor.ko
./lib/modules/3.14.2/videobuf2-vmalloc.ko
./lib/modules/3.14.2/nf_conntrack_ftp.ko
./lib/modules/3.14.2/xt_NFLOG.ko
./lib/modules/3.14.2/ip6table_nat.ko
./lib/modules/3.14.2/nf_conntrack_tftp.ko
./lib/modules/3.14.2/dm-service-time.ko
./lib/modules/3.14.2/appletalk.ko
./lib/modules/3.14.2/nf_conntrack_proto_gre.ko
./lib/modules/3.14.2/cmac.ko
./lib/modules/3.14.2/libiscsi_tcp.ko
./lib/modules/3.14.2/btrfs.ko
./lib/modules/3.14.2/xt_mac.ko
./lib/modules/3.14.2/mtd_blkdevs.ko
./lib/modules/3.14.2/ip6t_MASQUERADE.ko
./lib/modules/3.14.2/rtl8192cu.ko
./lib/modules/3.14.2/rtl_usb.ko
./lib/modules/3.14.2/raid6_pq.ko
./lib/modules/3.14.2/usb_f_ecm_subset.ko
./lib/modules/3.14.2/asix.ko
./lib/modules/3.14.2/gspca_vicam.ko
./lib/modules/3.14.2/async_pq.ko
./lib/modules/3.14.2/nf_nat_sip.ko
./lib/modules/3.14.2/nf_nat_h323.ko
./lib/modules/3.14.2/dm-snapshot.ko
./lib/modules/3.14.2/r8712u.ko
./lib/modules/3.14.2/dm-log.ko
./lib/modules/3.14.2/map_ram.ko
./lib/modules/3.14.2/pppox.ko
./lib/modules/3.14.2/nf_conntrack_sip.ko
./lib/modules/3.14.2/orion_nand.ko
./lib/modules/3.14.2/nf_nat_pptp.ko
./lib/modules/3.14.2/xt_NETMAP.ko
./lib/modules/3.14.2/gspca_benq.ko
./lib/modules/3.14.2/ubi.ko
./lib/modules/3.14.2/pktgen.ko
./lib/modules/3.14.2/udf.ko
./lib/modules/3.14.2/cdc_ncm.ko
./lib/modules/3.14.2/sisusbvga.ko
./lib/modules/3.14.2/xfrm6_mode_tunnel.ko
./lib/modules/3.14.2/udc-core.ko
./lib/modules/3.14.2/mv_udc.ko
./lib/modules/3.14.2/ntfs.ko
./lib/modules/3.14.2/cfi_util.ko
./lib/modules/3.14.2/usbhid.ko
./lib/modules/3.14.2/nf_conntrack_ipv6.ko
./lib/modules/3.14.2/nfsv4.ko
./lib/modules/3.14.2/videobuf2-core.ko
./lib/modules/3.14.2/plat_nand.ko
./lib/modules/3.14.2/dm-mod.ko
./lib/modules/3.14.2/psnap.ko
./lib/modules/3.14.2/ums-sddr09.ko
./lib/modules/3.14.2/cfg80211.ko
./lib/modules/3.14.2/cdc_subset.ko
./lib/modules/3.14.2/modules.dep
./lib/modules/3.14.2/ts_kmp.ko
./lib/modules/3.14.2/ppp_async.ko
./lib/modules/3.14.2/ccm.ko
./lib/modules/3.14.2/marvell.ko
./lib/modules/3.14.2/michael_mic.ko
./lib/modules/3.14.2/lzo_decompress.ko
./lib/modules/3.14.2/ums-datafab.ko
./lib/modules/3.14.2/chipreg.ko
./lib/modules/3.14.2/lockd.ko
./lib/modules/3.14.2/qinfo_probe.ko
./lib/modules/3.14.2/lpddr_cmds.ko
./lib/modules/3.14.2/v4l2-dv-timings.ko
./lib/modules/3.14.2/rt73usb.ko
./lib/modules/3.14.2/sunrpc.ko
./lib/modules/3.14.2/gspca_sn9c20x.ko
./lib/modules/3.14.2/nf_nat_snmp_basic.ko
./lib/modules/3.14.2/x_tables.ko
./lib/modules/3.14.2/usb_f_ecm.ko
./lib/modules/3.14.2/slhc.ko
./lib/modules/3.14.2/mtdblock.ko
./lib/modules/3.14.2/sr_mod.ko
./lib/modules/3.14.2/ipheth.ko
./lib/modules/3.14.2/ums-alauda.ko
./lib/modules/3.14.2/rtc-m41t80.ko
./lib/modules/3.14.2/rt2500usb.ko
./lib/modules/3.14.2/ts_bm.ko
./lib/modules/3.14.2/iptable_nat.ko
./lib/modules/3.14.2/wire.ko
./lib/modules/3.14.2/physmap.ko
./lib/modules/3.14.2/mdc800.ko
./lib/modules/3.14.2/rpcsec_gss_krb5.ko
correcting firmware image for 5big1 succeeded\n
Writing firmware to partion 7
512000+0 records in
512000+0 records out
262144000 bytes (250.0MB) copied, 33.210547 seconds, 7.5MB/s
writing firmware file to partition 7 succeeded
writing firmware to partition 1
512000+0 records in
512000+0 records out
262144000 bytes (250.0MB) copied, 33.324492 seconds, 7.5MB/s
writing firmware file to partition 1 succeeded
writing firmware to partition 2
512000+0 records in
512000+0 records out
262144000 bytes (250.0MB) copied, 33.103577 seconds, 7.6MB/s
writing firmware file to partition 2 succeeded
write default database to partition 5
uploading default database on partition 5 succeeded
extraction and installing of the default database on partition 5 succeeded
format partition 8 shared folder partition
formating partition 8 succeeded
create shared folder public on partition 8
Installation completed


Thanks in advance!

Best regards,

[Jocko]

So fvdw-sl install is clean :thumbup
But you have an issue with your DHCP server

Code: Select all

    LAN IP address: 169.254.5.148 (static - random)

The nas fails to get an IP address from your LAN.

It seems your subnet is 172.16.60.xxx. So you need to have a DHCP server on it

[Basajaun]

Thanks Jocko,

i've installed DHCP Server on my machine (Windows 7) - http://www.dhcpserver.de/cms/

I've booted NAS again, my dhcp server is running (172.16.60.1 - 172.16.60.254) and NAS ip is 169.254.63.36 (static - random) . Don't connect !!!

It's so crazy ;-)

Thanks in advance.

Best regards

[Basajaun]

Jocko, fvdw,

is it possible to boot NAS with standalone kernel and hand configure network data ?

Thanks in advance !

Best regards,

[Jocko]

Why did you install a DHCP on your laptop ?
If it was required that would mean your router (ISP box ?) does not have this feature ?

Can you please describe your LAN (how your nas and your latop are connected : switch, hub, router,...)

Did you try by disabling the firewall on your laptop ? Maybe some rules block requests sent by the clients (for example your nas)

[Basajaun]

Jocko,

firewall is disabled. Nas and my laptop connect to switch.

Thanks in advance.

Best regards,

[Basajaun]

Hi Team,

at last my NAS connect !!! Thanks for your time and help !!!!

NAS has only one disk. I want to add four disks. How could i configure RAID 5 with one + four disks ?

Firmware installed is fvdw-sl 17.0 (5big1), are there any update or patch ?

Again, thanks in advance !

Best regards,

[Jocko]

Ok

We will try to use a static IP.
With the attached file, NAS IP will be 172.16.60.10 and I assume the laptop's IP is 172.16.60.1

1/unzip the attached file in the folder tftp (where are the standalone kernels)
2/ get a telnet access
3/ backup the current nas database

Code: Select all

mkdir /sda5
mount /dev/sda5 /sda5
cp /sda5/etc/nas_conf_db.xml sda5/etc/nas_conf_db.xml.backup

4/ download the current conf file

Code: Select all

cd /sda5/etc
tftp -l nas_conf_db.xml -r nas_conf_db.xml.dynamic -p ip-pc

(where ip_pc is the ip address of your laptop, should be 172.16.60.1)
You should have now a file nas_conf_db.xml.dynamic in the folder tftp on your laptop
Do only the last commands if you succeeded the backup commands
5/upload the conf file

Code: Select all

cd /sda5/etc
tftp -l nas_conf_db.xml -r nas_conf_db.xml.static -g ip-pc
chmod 777 /sda5/etc/nas_conf_db.xml

(where ip_pc is the ip address of your laptop, should be 172.16.60.1. Please to note, the flag used is now '-g' instead of '-p')

Then restart the nas and see if you can load the web interface with the url

Code: Select all

http://172.16.60.10

Note: if I understand your config, your laptop is not on a LAN :scratch and you try to create a LAN by using only a switch (a switch is not a router)

---edit---
what do you mean with

at least my NAS connect !!!

if you refer to the connection via fvdw-sl console, it is not enough !