plugout.net

by **stamy** » Wed Dec 23, 2015 10:12 am

The sdd8 has no filesystem on it as i didn't format it yet. I can do it right now if you wish. (I could use something like "mke2fs -t ext3 -j -m 1 /dev/sdd8")

I attached the screenshots.

Results:

Code: Select all: root@lacie-rei:/share # grep addonsvol /etc/nas_conf_db.xml <addonsvolume>1003</addonsvolume>

As you can see on the disk screenshot, the empty space size of the raid is smaller then the total size probably because there is a filesystem on it. (no data at all)
For sdd8 the size is the same, not smaller, probably because there is no filesystem on it...

What do you think ? should i format sdd8 ? (i have no data whatsoever on the nas so far)

Thank you.

by **Jocko** » Wed Dec 23, 2015 10:28 am

I understand better your issue.

Currently, nas database set as addons volume VolD (1003). But it is not yet available (not formatted) so we can not switch it in the main setup : option disabled as the firmware finds only one volume available (I need to deepen this point because it should in this case auto-set the addons volume)

So can you post

Code: Select all: grep vols -A 20 /etc/nas_conf_db.xml

for my understanding.

I think now you should format sdd8 with your command and restart the NAS.

Then select RD5-0 as addons volume and after you should be able to create fvdw on it.

As you can see on the disk screenshot, the empty space size of the raid is smaller then the total size probably because there is a filesystem on it. (no data at all)

This is the expected behaviour (this space is used by the file system).

by **stamy** » Wed Dec 23, 2015 10:34 am

Code: Select all: root@lacie-rei:/share # grep vols -A 20 /etc/nas_conf_db.xml <vols> <vol> <volid>1003</volid> <md>/dev/sdd8</md> <fs>1003</fs> <lastindex>1</lastindex> <name>Vol-D</name> <devices/> <raidtype>single</raidtype> <color>#e9f626</color> <formatting>1</formatting> <size>928.745795727</size> </vol> <vol> <volid>1100</volid> <md>/dev/md0</md> <fs>1100</fs> <lastindex>1</lastindex> <name>RD5-0</name> <devices>/dev/sda8 /dev/sdb8 /dev/sdc8 /dev/sde8 </devices> <raidtype>raid5</raidtype> -- </vols> <rsyncd> <enable>false</enable> <modules> <enable>false</enable> </modules> </rsyncd> </nas_conf_db>

I will now format sdd8 and then restart the NAS.

by **stamy** » Wed Dec 23, 2015 10:42 am

Code: Select all: root@lacie-rei:/share # mke2fs -t ext3 -j -m 1 /dev/sdd8 mke2fs 1.42.11 (09-Jul-2014) Creating filesystem with 243465137 4k blocks and 60866560 inodes Filesystem UUID: 403e3465-60b8-4fab-9b4a-a0a43001a1e2 Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 Allocating group tables: done Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done

Reboot ongoing

by **Jocko** » Wed Dec 23, 2015 10:52 am

I looked at the main setup menu and indeed the symlinks are not updated if they target a not available volume.

it was your case with Vol-D

Code: Select all: <formatting>1</formatting>

.

This will be fixed in the next release.

by **stamy** » Wed Dec 23, 2015 10:57 am

Now the LED for sdd changed from red to blue, nice :)

Results:

Code: Select all: root@lacie-rei:/ # cat /boot.log start boot log detect and set platform 5big2 UIMAGE-3142-NWSP2CL-8 5big2 mount dev/pts update dev nodes booting using sda1 root file system... make dev node for buttons... make dev node for tun device... enable IP forwarding... start buttons control daemon device = 5big2 source = buttons-nwsp2 buttons-nwsp2 daemon started Wed Dec 23 11:43:29 CET 2015 create temporary passwd file run udevstart to update dev nodes when necessary inserting kernel modules: create temporary group file configure loopback network interface setting reboot and standby 5big2 rebootd-nwsp2 5big2 standbyd-nwsp2 start fan fan5big daemon started starting php based setup routines step 1 * Starting udevd... [ OK ] * Found XML database configuration file... [ OK ] * Starting RAID monitor: [ OK ] * Starting restore RAID devices... - Assembling device /dev/md0: [ OK ] * Finishing restore RAID devices... [ OK ] * Updating Disks database... Warning: Illegal string offset 'share' in /etc/finc/dm_update_single_db.finc on line 241 Warning: Invalid argument supplied for foreach() in /etc/finc/dm_update_single_d b.finc on line 265 Warning: Invalid argument supplied for foreach() in /etc/finc/dm_update_single_d b.finc on line 325 Warning: Invalid argument supplied for foreach() in /etc/finc/dm_update_single_d b.finc on line 445 Warning: Invalid argument supplied for foreach() in /etc/finc/dm_update_single_d b.finc on line 492 [ OK ] * Starting mount of volumes... - Mounting volume Vol-D: [ OK ] - Mounting volume RD5-0: [ OK ] * Finishing mount of volumes... [ OK ] Warning: Illegal string offset 'share' in /etc/finc/exthddfunc_wait_allmountExtH dd.finc on line 104 Warning: Invalid argument supplied for foreach() in /etc/finc/exthddfunc_wait_al lmountExtHdd.finc on line 104 * Generating Hosts File... [ OK ] * Configuring System Hostname... [ OK ] * Configuring LAN interface... [ OK ] * Initializing Timezone... [ OK ] * Starting web server... [ OK ] * Starting mount of internal USB ... * Finishing mount internal USB ... [ OK ] * Configuring Disks... [ OK ] * Configuring Samba... [ OK ] * Configuring System Users... Root password: use default password Set users, linux and samba accounts [ OK ] * Starting Fvdw-sl Discovery Daemon... [ OK ] start rpcbind service starting php based setup routines step 2 * Starting dropbear... [ OK ] * Kill temporary dropbear... [ OK ] starting php based setup routines step 3 * Starting daemon update Hosts File... [ OK ] * Starting mount of remote shares... * Finishing mount shares... [ OK ] starting php based setup routines step banner *** fvdw-sl NAS firmware This is fvdw-sl version: fvdw-sl 16.1 patched built on: Oct 01 2015 LAN IP address: 10.23.148.132 (DHCP) Port configuration: LAN -> eth0 php based setup routines finished web permission on resolv.conf set device tuning for dms performance LED settings else loop1 finished rcS finished

Now i have the choice to move the addons location to RD5-0. So i will do it, and then try to create the share fvdw.

by **stamy** » Wed Dec 23, 2015 11:01 am

While selecting RD5-0 as addons, should i check the box "move the tech share to the new volume" ? or not ? (i have a warning prompt if the box is checked)

by **Jocko** » Wed Dec 23, 2015 11:31 am

No need to select the option "Move tech..." as vol-D is empty (just formatted).

by **stamy** » Wed Dec 23, 2015 12:10 pm

Done:

Code: Select all: 00 - Create a temporary copy of the current NAS database file: OK 10 - Lists which servers are installed or running and stops them 15 - Stop the common servers Samba: stopped 20 - Save the new selected addons volume 35 - Create a new fvdw share on 1100 OK 40 - Restore some file system symlinks 80 - Restart servers restart Samba server 99 - Backup the original nas database file: OK

by **stamy** » Wed Dec 23, 2015 12:20 pm

No more errors, thank you very much.

Code: Select all: root@lacie-rei:/ # cat /boot.log start boot log detect and set platform 5big2 UIMAGE-3142-NWSP2CL-8 5big2 mount dev/pts update dev nodes booting using sda1 root file system... make dev node for buttons... make dev node for tun device... enable IP forwarding... start buttons control daemon device = 5big2 source = buttons-nwsp2 buttons-nwsp2 daemon started Wed Dec 23 13:16:24 CET 2015 create temporary passwd file run udevstart to update dev nodes when necessary inserting kernel modules: create temporary group file configure loopback network interface setting reboot and standby 5big2 rebootd-nwsp2 5big2 standbyd-nwsp2 start fan fan5big daemon started starting php based setup routines step 1 * Starting udevd... [ OK ] * Found XML database configuration file... [ OK ] * Starting RAID monitor: [ OK ] * Starting restore RAID devices... - Assembling device /dev/md0: [ OK ] * Finishing restore RAID devices... [ OK ] * Updating Disks database... [ OK ] * Starting mount of volumes... - Mounting volume Vol-D: [ OK ] - Mounting volume RD5-0: [ OK ] * Finishing mount of volumes... [ OK ] * Generating Hosts File... [ OK ] * Configuring System Hostname... [ OK ] * Configuring LAN interface... [ OK ] * Initializing Timezone... [ OK ] * Starting web server... [ OK ] * Starting mount of internal USB ... * Finishing mount internal USB ... [ OK ] * Configuring Disks... [ OK ] * Configuring Samba... [ OK ] * Configuring System Users... Root password: use default password Set users, linux and samba accounts [ OK ] * Starting Fvdw-sl Discovery Daemon... [ OK ] start rpcbind service starting php based setup routines step 2 * Starting dropbear... [ OK ] * Kill temporary dropbear... [ OK ] starting php based setup routines step 3 * Starting daemon update Hosts File... [ OK ] * Starting mount of remote shares... * Finishing mount shares... [ OK ] starting php based setup routines step banner *** fvdw-sl NAS firmware This is fvdw-sl version: fvdw-sl 16.1 patched built on: Oct 01 2015 LAN IP address: 10.23.148.132 (DHCP) Port configuration: LAN -> eth0 php based setup routines finished web permission on resolv.conf set device tuning for dms performance LED settings else loop1 finished rcS finished

plugout.net

[Solved] fvdw technical share with addons sub-folder

Re: fvdw technical share with addons sub-folder

Re: fvdw technical share with addons sub-folder

Re: fvdw technical share with addons sub-folder

Re: fvdw technical share with addons sub-folder

Re: fvdw technical share with addons sub-folder

Re: fvdw technical share with addons sub-folder

Re: fvdw technical share with addons sub-folder

Re: fvdw technical share with addons sub-folder

Re: fvdw technical share with addons sub-folder

Re: fvdw technical share with addons sub-folder

Who is online