LED control

[Jocko]

Ok

Now, if you do after rebooting the NAS :

Code: Select all

led -l frontred -w off
/etc/leds_bootup

What is it the LEDs status ?

and also

Code: Select all

led -l frontred -w on
led -l frontred -w off
/etc/leds_bootup

[taetae]

Code: Select all

led -l frontred -w off

Front LED blue blinking and all Sata LED blue blinking

Code: Select all

/etc/leds_bootup

Front LED blue blinking and all Sata LED blue on ( blinking on R/W disk events)
not reboot execute other commands

Code: Select all

led -l frontred -w on

Front LED violet and all Sata LED blue on ( blinking on R/W disk events)

Code: Select all

led -l frontred -w off

Front LED blue all Sata LED blue on ( blinking on R/W disk events)

Code: Select all

/etc/leds_bootup

Front LED blue all Sata LED blue on ( blinking on R/W disk events)

ps: the given commands without reboot


________________________________________________________________

with reboot

Code: Select all

led -l frontred -w on

Front LED red and all Sata LED blue blinking

Code: Select all

led -l frontred -w off

Front LED off and all Sata LED blue blinking

Code: Select all

/etc/leds_bootup

Front LED off all Sata LED blue on ( blinking on R/W disk events)

[Jocko]

I just sent you a new patch version.

So after installing it and rebooting your NAS, do

Code: Select all

/etc/leds_bootup

and all LED should not blink.

and in putty

Code: Select all

/etc/leds_switch off

must switch off only the front LED

After these tests, if you can remove a disk (of course not the system disk :sda), do again after removing one disk

Code: Select all

/etc/leds_bootup

the red sata led of the missing disk is on ?

[taetae]

Code: Select all

/etc/leds_bootup

Front LED blue blinking and all Sata LED blue on ( blinking on R/W disk events)

Code: Select all

/etc/leds_switch off

Front LED blue blinking and all Sata LED blue on ( blinking on R/W disk events)

Code: Select all

/etc/leds_bootup

Front LED blue blinking ,Sata LED remove disk off and other Sata LED blue on ( blinking on R/W disk events)

[Jocko]

So we have a pretty common command for nwsp1/2/max, phn, 5big1/2 :-D Need to test it on ISP1, cloudbox and 2big1/2.
I will sent you a new patch so that after booting, the LED is rightly set.

However we must try to find some command how to switch of the sata LED.
So could you post the content of a trigger file (cat trigger) for a red sata LED ?

[Jocko]

Code: Select all

/etc/leds_switch off

Front LED blue blinking and all Sata LED blue on ( blinking on R/W disk events)

:scratch

So try this sequence :
reboot the NAS and do /etc/leds_bootup to give a clean status

Code: Select all

led -l frontblink -w off
led -w off
led -w on
led -l frontred -w on
led -l frontred -w off
led -w off
led -w on


And report the front LED status at each step

[taetae]

reboot nas

Code: Select all

/etc/leds_bootup

Front LED blue blinking and all Sata LED blue on ( blinking on R/W disk events)

Code: Select all

led -l frontblink -w off

Front LED blue blinking and all Sata LED blue on ( blinking on R/W disk events)

Code: Select all

led -w off

Front LED blue blinking and all Sata LED blue on ( blinking on R/W disk events)

Code: Select all

led -w on

Front LED blue blinking and all Sata LED blue on ( blinking on R/W disk events)

Code: Select all

led -l frontred -w on

Front LED violet and all Sata LED blue on ( blinking on R/W disk events)

Code: Select all

led -l frontred -w off

Front LED blue on and all Sata LED blue on ( blinking on R/W disk events)

Code: Select all

led -w off

Front LED blue off and all Sata LED blue on ( blinking on R/W disk events)

Code: Select all

led -w on

Front LED blue on and all Sata LED blue on ( blinking on R/W disk events)

[Jocko]

Thank taetae,

So it seems that to stop any blinking we must switch on first the red LED :-D

Ok, I go to change the leds_switch command.

But I still have two questions :

However we must try to find some command how to switch of the sata LED.
So could you post the content of a trigger file (cat trigger) for a red sata LED ?

After these tests, if you can remove a disk (of course not the system disk :sda), do again after removing one disk

Code: Select all

/etc/leds_bootup

the red sata led of the missing disk is on ?

[Jocko]

I just sent you again a new patch version.

With this version switch command should work and after booting the blue LEDs must be on (no need to do the command leds_bootup).

[taetae]

Code: Select all

/etc/leds_bootup

Front LED blue blinking ,Sata LED remove disk off and other Sata LED blue on ( blinking on R/W disk events)

Sata LED remove disk off

___________________

Thank taetae,

So it seems that to stop any blinking we must switch on first the red LED :-D

Ok, I go to change the leds_switch command.

But I still have two questions :

However we must try to find some command how to switch of the sata LED.
So could you post the content of a trigger file (cat trigger) for a red sata LED ?

tell me the commands and do the test