fvdw-sl firmware version 14-0 on Lacie Network Space vs2

[mykmyk]

Code: Select all

login as: root
root@192.168.1.10's password:
root@:/ # mount /dev/sda8 /share/1000
root@:/ # mount
rootfs on / type rootfs (rw)
/dev/root on / type ext3 (rw,relatime,errors=continue,barrier=0,data=ordered)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
/dev/sda1 on / type ext3 (rw,relatime,errors=continue,barrier=0,data=ordered)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
/dev/sda5 on /rw_fs type ext3 (rw,noatime,errors=continue,barrier=0,data=ordered)
tmpfs on /rw_fs/tmp/usr/var type tmpfs (rw,relatime,size=5000k)
/dev/root on /lacie-boot type ext3 (rw,relatime,errors=continue,barrier=0,data=ordered)
/dev/sda8 on /share/1000 type ext3 (rw,relatime,errors=continue,barrier=0,data=ordered)
root@:/ # ls -al /share/1000
total 28
drwxr-xr-x  4 root root  4096 2013-06-26 20:03 .
drwxrwxrwx  3 root root  4096 2013-06-29 03:04 ..
drwx------  2 root root 16384 2013-06-26 19:38 lost+found
drwxrwxrwx  2 root root  4096 2013-06-26 18:57 public
root@:/ #


[Jocko]

So now in the web-interface, the data partition must be displayed and you can create some shares.

But i don't still understand why this partition is not mounted when the NAS is booting :scratch

Create a new one for example 'fvdw' : this will allow to resetting the samba server...(later for managing the NAS you will need to have the share fvdw).

from your PC, copy the attached file on the share 'public' ( to see the public share check if in the LAN menu, you use the same workgroup between the NAS and your PC)

After unzipping the file, do these commands

Code: Select all

cp -iv /share/1000/public/globals.inc /etc/inc

/sbin/reboot -f

After rebooting, restart your shell console in Putty and do these commands :

Code: Select all

 mount

if sda8 is not mounted, mount sda8

Code: Select all

mount /dev/sda8 /share/1000

And make these last commands

Code: Select all

cp /boot.log /share/1000/public
cp /rw_fs/tmp/var/log/messages /share/1000/public

Post these two files which are now present in the public share.

[mykmyk]

Unfortunately, it did not help

[Jocko]

What do you did ? I hope not a restart !

[mykmyk]

Code: Select all

login as: root
root@192.168.1.10's password:
root@:/ # mount
rootfs on / type rootfs (rw)
/dev/root on / type ext3 (rw,relatime,errors=continue,barrier=0,data=ordered)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
/dev/sda1 on / type ext3 (rw,relatime,errors=continue,barrier=0,data=ordered)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
/dev/sda5 on /rw_fs type ext3 (rw,noatime,errors=continue,barrier=0,data=ordered)
tmpfs on /rw_fs/tmp/usr/var type tmpfs (rw,relatime,size=5000k)
/dev/root on /lacie-boot type ext3 (rw,relatime,errors=continue,barrier=0,data=ordered)
root@:/ # mount /dev/sda8 share/1000
root@:/ # cp /boot.log /share/1000/public
root@:/ # cp /rw_fs/tmp/var/log/messages /share/1000/public
root@:/ #


[Jocko]

Sorry I do not understand what you do ...

But make these commands and post the outputs.

From putty

Code: Select all

cat /boot.log

and

Code: Select all

cat /rw_fs/tmp/var/log/messages

(be careful can contain many lines)

[mykmyk]

thank you all
the problem solved by this http://plugout.net/viewtopic.php?f=7&t=1271 :applause