fvdw-sl-console for ms windows install without removing HDD

[favroom]

first lets check the environment setting
give command: printenv bootargs
andpost the output

The output of that command:
provided by fvdw
waiting for u-boot..
starting u-boot net console click on window and press enter
no lump receive; continuing
Marvell>> printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/sda7 ro reset=0 productType=ASTON_KW
Marvell>>

It seems that the kernel stalls or something.

After submitting the commands above and waiting some minutes, I am not able to get any respons on the Marvell prompt.
I have to shut off the NWSP2 and turn it back on.
(I have to pull the cable...)

[fvdw]

that looks good as well
now do following

on pc running windows with fbvdw-sl console copy the file with name UIMAGE-26394-NWSP2CL-57 from the \path-to\tftp\nwps2 folder to the \path-to\tftp folder (so one level up)
Now at Marvel prompt give commands (do not change anything on these commands)

Code: Select all

setenv ipaddr ${ipaddr}
setenv serverip ${serverip}
tftpboot 0x800000 UIMAGE-26394-NWSP2CL-57

This should load the kernel via tftp

[fvdw]

t seems that the kernel stalls or something.

After submitting the commands above and waiting some minutes, I am not able to get any respons on the Marvell prompt.
I have to shut off the NWSP2 and turn it back on.
(I have to pull the cable...)

There is no kernel yet running on the nwsp2, only u-boot....

[favroom]

that looks good as well
now do following

on pc running windows with fbvdw-sl console copy the file with name UIMAGE-26394-NWSP2CL-57 from the \path-to\tftp\nwps2 folder to the \path-to\tftp folder (so one level up)
Now at Marvel prompt give commands (do not change anything on these commands)

Code: Select all

setenv ipaddr ${ipaddr}
setenv serverip ${serverip}
tftpboot 0x800000 UIMAGE-26394-NWSP2CL-57

This should load the kernel via tftp

Something went wrong...

provided by fvdw
waiting for u-boot..
starting u-boot net console click on window and press enter
no lump receive; continuing
Marvell>> setenv ipaddr ${ipaddr}
setenv ipaddr ${ipaddr}
Marvell>> setenv serverip ${serverip}
setenv serverip ${serverip}
Marvell>> tftpboot 0x800000 UIMAGE-26394-NWSP2CL-57
tftpboot 0x800000 UIMAGE-26394-NWSP2CL-57
Using egiga0 device
TFTP from server 192.168.2.15; our IP address is 192.168.2.2
Filename 'UIMAGE-26394-NWSP2CL-57'.
Load address: 0x800000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
Marvell>>

[fvdw]

start the tftp server in the fvdw-sl console (forgot to mention that)

[fvdw]

and any result yet ? ;)

[favroom]

start the tftp server in the fvdw-sl console (forgot to mention that)

Ah! Yes, that works!..

provided by fvdw
waiting for u-boot..
starting u-boot net console click on window and press enter
no lump receive; continuing
Marvell>> setenv ipaddr ${ipaddr}
setenv ipaddr ${ipaddr}
Marvell>> setenv serverip ${serverip}
setenv serverip ${serverip}
Marvell>> tftpboot 0x800000 UIMAGE-26394-NWSP2CL-57
tftpboot 0x800000 UIMAGE-26394-NWSP2CL-57
Using egiga0 device
TFTP from server 192.168.2.15; our IP address is 192.168.2.2
Filename 'UIMAGE-26394-NWSP2CL-57'.
Load address: 0x800000
Loading: ########T #########################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##########################
done
Bytes transferred = 3123524 (2fa944 hex)
Marvell>>

[fvdw]

give command

Code: Select all

bootm

this will start the kernel which will try to load the firmware from sda7

[fvdw]

do you use a wireless connection between PC and router ?

[favroom]

give command

Code: Select all

bootm

this will start the kernel which will try to load the firmware from sda7

Kernel started...
What's next:)