plugout.net

by **razzor0** » Mon May 27, 2024 8:08 am

Code: Select all: [37321.270828] ata2.01: status: { DRDY ERR } [37321.274820] ata2.01: error: { UNC } [37321.278300] ata2.15: hard resetting link [37321.789405] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37321.796706] ata2.00: limiting SATA link speed to 1.5 Gbps [37321.802219] ata2.03: limiting SATA link speed to 1.5 Gbps [37321.807601] ata2.00: hard resetting link [37322.150283] ata2.01: hard resetting link [37322.659673] ata2.02: hard resetting link [37323.169663] ata2.03: hard resetting link [37323.559461] ata2.01: configured for UDMA/133 [37323.609444] ata2.02: configured for UDMA/133 [37323.613915] sd 1:1:0:0: [sde] tag#29 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37323.622192] sd 1:1:0:0: [sde] tag#29 Sense Key : 0x3 [current] [37323.628093] sd 1:1:0:0: [sde] tag#29 ASC=0x11 ASCQ=0x4 [37323.633313] sd 1:1:0:0: [sde] tag#29 CDB: opcode=0x28 28 00 9e f8 94 38 00 00 08 00 [37323.640972] print_req_error: I/O error, dev sde, sector 2667091000 [37323.647128] md/raid:md0: read error not correctable (sector 2660536480 on sde8). [37323.654574] ata2: EH complete [37330.559835] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37330.566253] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37330.574703] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37330.581143] ata2.01: failed command: READ DMA EXT [37330.585845] ata2.01: cmd 25/00:08:48:80:f8/00:00:9e:00:00/e0 tag 30 dma 4096 in [37330.585845] res 51/40:00:48:80:f8/40:00:9e:00:00/00 Emask 0x9 (media error) [37330.600847] ata2.01: status: { DRDY ERR } [37330.604838] ata2.01: error: { UNC } [37330.608317] ata2.15: hard resetting link [37331.119424] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37331.126723] ata2.00: limiting SATA link speed to 1.5 Gbps [37331.132216] ata2.03: limiting SATA link speed to 1.5 Gbps [37331.137591] ata2.00: hard resetting link [37331.480188] ata2.01: hard resetting link [37331.989666] ata2.02: hard resetting link [37332.499689] ata2.03: hard resetting link [37332.889448] ata2.01: configured for UDMA/133 [37332.939461] ata2.02: configured for UDMA/133 [37332.943930] sd 1:1:0:0: [sde] tag#30 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37332.952186] sd 1:1:0:0: [sde] tag#30 Sense Key : 0x3 [current] [37332.958083] sd 1:1:0:0: [sde] tag#30 ASC=0x11 ASCQ=0x4 [37332.963326] sd 1:1:0:0: [sde] tag#30 CDB: opcode=0x28 28 00 9e f8 80 48 00 00 08 00 [37332.970985] print_req_error: I/O error, dev sde, sector 2667085896 [37332.977144] md/raid:md0: read error not correctable (sector 2660531376 on sde8). [37332.984618] ata2: EH complete [37343.819819] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37343.826243] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37343.834690] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37343.841122] ata2.01: failed command: READ DMA EXT [37343.845825] ata2.01: cmd 25/00:00:98:fa:f9/00:04:9e:00:00/e0 tag 22 dma 524288 in [37343.845825] res 51/40:00:00:fc:f9/40:00:9e:00:00/00 Emask 0x9 (media error) [37343.861001] ata2.01: status: { DRDY ERR } [37343.864991] ata2.01: error: { UNC } [37343.868472] ata2.15: hard resetting link [37344.379421] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37344.386723] ata2.00: limiting SATA link speed to 1.5 Gbps [37344.392214] ata2.03: limiting SATA link speed to 1.5 Gbps [37344.397589] ata2.00: hard resetting link [37344.740194] ata2.01: hard resetting link [37345.249667] ata2.02: hard resetting link [37345.759678] ata2.03: hard resetting link [37346.149451] ata2.01: configured for UDMA/133 [37346.199465] ata2.02: configured for UDMA/133 [37346.206735] sd 1:1:0:0: [sde] tag#22 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37346.216325] sd 1:1:0:0: [sde] tag#22 Sense Key : 0x3 [current] [37346.222529] sd 1:1:0:0: [sde] tag#22 ASC=0x11 ASCQ=0x4 [37346.227737] sd 1:1:0:0: [sde] tag#22 CDB: opcode=0x28 28 00 9e f9 fa 98 00 04 00 00 [37346.235379] print_req_error: I/O error, dev sde, sector 2667183104 [37346.241576] md/raid:md0: read error not correctable (sector 2660628584 on sde8). [37346.249008] md/raid:md0: read error not correctable (sector 2660628592 on sde8). [37346.256479] md/raid:md0: read error not correctable (sector 2660628600 on sde8). [37346.263942] md/raid:md0: read error not correctable (sector 2660628608 on sde8). [37346.271393] md/raid:md0: read error not correctable (sector 2660628616 on sde8). [37346.278810] md/raid:md0: read error not correctable (sector 2660628624 on sde8). [37346.286263] md/raid:md0: read error not correctable (sector 2660628632 on sde8). [37346.293695] md/raid:md0: read error not correctable (sector 2660628640 on sde8). [37346.301149] md/raid:md0: read error not correctable (sector 2660628648 on sde8). [37346.308566] md/raid:md0: read error not correctable (sector 2660628656 on sde8). [37346.319167] ata2: EH complete [37350.059832] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37350.066250] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37350.074672] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37350.081124] ata2.01: failed command: READ DMA EXT [37350.085824] ata2.01: cmd 25/00:00:98:22:fa/00:04:9e:00:00/e0 tag 28 dma 524288 in [37350.085824] res 51/40:00:a0:23:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37350.100987] ata2.01: status: { DRDY ERR } [37350.104980] ata2.01: error: { UNC } [37350.108460] ata2.15: hard resetting link [37350.619411] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37350.626712] ata2.00: limiting SATA link speed to 1.5 Gbps [37350.632224] ata2.03: limiting SATA link speed to 1.5 Gbps [37350.637606] ata2.00: hard resetting link [37350.980413] ata2.01: hard resetting link [37351.489682] ata2.02: hard resetting link [37351.999669] ata2.03: hard resetting link [37352.389465] ata2.01: configured for UDMA/133 [37352.439462] ata2.02: configured for UDMA/133 [37352.446787] sd 1:1:0:0: [sde] tag#28 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37352.455912] sd 1:1:0:0: [sde] tag#28 Sense Key : 0x3 [current] [37352.461991] sd 1:1:0:0: [sde] tag#28 ASC=0x11 ASCQ=0x4 [37352.467199] sd 1:1:0:0: [sde] tag#28 CDB: opcode=0x28 28 00 9e fa 22 98 00 04 00 00 [37352.474862] print_req_error: I/O error, dev sde, sector 2667193248 [37352.481034] raid5_end_read_request: 73 callbacks suppressed [37352.481041] md/raid:md0: read error not correctable (sector 2660638728 on sde8). [37352.494041] md/raid:md0: read error not correctable (sector 2660638736 on sde8). [37352.501514] md/raid:md0: read error not correctable (sector 2660638744 on sde8). [37352.508934] md/raid:md0: read error not correctable (sector 2660638752 on sde8). [37352.516398] md/raid:md0: read error not correctable (sector 2660638760 on sde8). [37352.523851] md/raid:md0: read error not correctable (sector 2660638768 on sde8). [37352.531309] md/raid:md0: read error not correctable (sector 2660638776 on sde8). [37352.538724] md/raid:md0: read error not correctable (sector 2660638784 on sde8). [37352.546163] md/raid:md0: read error not correctable (sector 2660638792 on sde8). [37352.553604] md/raid:md0: read error not correctable (sector 2660638800 on sde8). [37352.561239] ata2: EH complete [37356.629819] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37356.636244] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37356.644690] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37356.651123] ata2.01: failed command: READ DMA EXT [37356.655826] ata2.01: cmd 25/00:00:98:ae:fa/00:04:9e:00:00/e0 tag 21 dma 524288 in [37356.655826] res 51/40:00:80:b1:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37356.671018] ata2.01: status: { DRDY ERR } [37356.675010] ata2.01: error: { UNC } [37356.678490] ata2.15: hard resetting link [37357.189437] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37357.196739] ata2.00: limiting SATA link speed to 1.5 Gbps [37357.202233] ata2.03: limiting SATA link speed to 1.5 Gbps [37357.207609] ata2.00: hard resetting link [37357.550194] ata2.01: hard resetting link [37358.059670] ata2.02: hard resetting link [37358.569680] ata2.03: hard resetting link [37358.959453] ata2.01: configured for UDMA/133 [37359.009486] ata2.02: configured for UDMA/133 [37359.014306] sd 1:1:0:0: [sde] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37359.022560] sd 1:1:0:0: [sde] tag#21 Sense Key : 0x3 [current] [37359.028454] sd 1:1:0:0: [sde] tag#21 ASC=0x11 ASCQ=0x4 [37359.033700] sd 1:1:0:0: [sde] tag#21 CDB: opcode=0x28 28 00 9e fa ae 98 00 04 00 00 [37359.041343] print_req_error: I/O error, dev sde, sector 2667229568 [37359.047495] raid5_end_read_request: 85 callbacks suppressed [37359.047502] md/raid:md0: read error not correctable (sector 2660675048 on sde8). [37359.060461] md/raid:md0: read error not correctable (sector 2660675056 on sde8). [37359.067824] md/raid:md0: read error not correctable (sector 2660675064 on sde8). [37359.075202] md/raid:md0: read error not correctable (sector 2660675072 on sde8). [37359.082599] md/raid:md0: read error not correctable (sector 2660675080 on sde8). [37359.089975] md/raid:md0: read error not correctable (sector 2660675088 on sde8). [37359.097338] md/raid:md0: read error not correctable (sector 2660675096 on sde8). [37359.104735] md/raid:md0: read error not correctable (sector 2660675104 on sde8). [37359.112111] md/raid:md0: read error not correctable (sector 2660675112 on sde8). [37359.119508] md/raid:md0: read error not correctable (sector 2660675120 on sde8). [37359.126959] ata2: EH complete [37362.499796] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37362.506216] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37362.514639] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37362.521092] ata2.01: failed command: READ DMA EXT [37362.525791] ata2.01: cmd 25/00:08:00:fc:f9/00:00:9e:00:00/e0 tag 24 dma 4096 in [37362.525791] res 51/40:00:00:fc:f9/40:00:9e:00:00/00 Emask 0x9 (media error) [37362.540771] ata2.01: status: { DRDY ERR } [37362.544765] ata2.01: error: { UNC } [37362.548246] ata2.15: hard resetting link [37363.059410] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37363.066710] ata2.00: limiting SATA link speed to 1.5 Gbps [37363.072196] ata2.03: limiting SATA link speed to 1.5 Gbps [37363.077572] ata2.00: hard resetting link [37363.420182] ata2.01: hard resetting link [37363.929671] ata2.02: hard resetting link [37364.579669] ata2.03: hard resetting link [37364.969452] ata2.01: configured for UDMA/133 [37365.019465] ata2.02: configured for UDMA/133 [37365.023936] sd 1:1:0:0: [sde] tag#24 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37365.032186] sd 1:1:0:0: [sde] tag#24 Sense Key : 0x3 [current] [37365.038083] sd 1:1:0:0: [sde] tag#24 ASC=0x11 ASCQ=0x4 [37365.043303] sd 1:1:0:0: [sde] tag#24 CDB: opcode=0x28 28 00 9e f9 fc 00 00 00 08 00 [37365.050941] print_req_error: I/O error, dev sde, sector 2667183104 [37365.057100] raid5_end_read_request: 25 callbacks suppressed [37365.057106] md/raid:md0: read error not correctable (sector 2660628584 on sde8). [37365.070098] ata2: EH complete [37368.569837] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x400000 action 0x6 [37368.576688] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37368.585106] ata2.15: SError: { Handshk } [37368.589024] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37368.595475] ata2.01: failed command: READ DMA EXT [37368.600193] ata2.01: cmd 25/00:08:a0:23:fa/00:00:9e:00:00/e0 tag 8 dma 4096 in [37368.600193] res 51/40:00:a0:23:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37368.615109] ata2.01: status: { DRDY ERR } [37368.619100] ata2.01: error: { UNC } [37368.622598] ata2.15: hard resetting link [37369.129424] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37369.136728] ata2.00: limiting SATA link speed to 1.5 Gbps [37369.142220] ata2.03: limiting SATA link speed to 1.5 Gbps [37369.147596] ata2.00: hard resetting link [37369.490198] ata2.01: hard resetting link [37369.999673] ata2.02: hard resetting link [37370.509683] ata2.03: hard resetting link [37370.899456] ata2.01: configured for UDMA/133 [37370.949468] ata2.02: configured for UDMA/133 [37370.953943] sd 1:1:0:0: [sde] tag#8 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37370.962111] sd 1:1:0:0: [sde] tag#8 Sense Key : 0x3 [current] [37370.967922] sd 1:1:0:0: [sde] tag#8 ASC=0x11 ASCQ=0x4 [37370.973079] sd 1:1:0:0: [sde] tag#8 CDB: opcode=0x28 28 00 9e fa 23 a0 00 00 08 00 [37370.980652] print_req_error: I/O error, dev sde, sector 2667193248 [37370.986812] md/raid:md0: read error not correctable (sector 2660638728 on sde8). [37370.994271] ata2: EH complete [37376.269836] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37376.276259] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37376.284691] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37376.291143] ata2.01: failed command: READ DMA EXT [37376.295843] ata2.01: cmd 25/00:08:e0:25:fa/00:00:9e:00:00/e0 tag 1 dma 4096 in [37376.295843] res 51/40:00:e0:25:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37376.310750] ata2.01: status: { DRDY ERR } [37376.314739] ata2.01: error: { UNC } [37376.318224] ata2.15: hard resetting link [37376.829414] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37376.836711] ata2.00: limiting SATA link speed to 1.5 Gbps [37376.842224] ata2.03: limiting SATA link speed to 1.5 Gbps [37376.847607] ata2.00: hard resetting link [37377.190198] ata2.01: hard resetting link [37377.699684] ata2.02: hard resetting link [37378.209771] ata2.03: hard resetting link [37378.599471] ata2.01: configured for UDMA/133 [37378.649455] ata2.02: configured for UDMA/133 [37378.653927] sd 1:1:0:0: [sde] tag#1 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37378.662119] sd 1:1:0:0: [sde] tag#1 Sense Key : 0x3 [current] [37378.667934] sd 1:1:0:0: [sde] tag#1 ASC=0x11 ASCQ=0x4 [37378.673092] sd 1:1:0:0: [sde] tag#1 CDB: opcode=0x28 28 00 9e fa 25 e0 00 00 08 00 [37378.680669] print_req_error: I/O error, dev sde, sector 2667193824 [37378.686831] md/raid:md0: read error not correctable (sector 2660639304 on sde8). [37378.694583] ata2: EH complete [37382.439835] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37382.446256] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37382.454704] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37382.461135] ata2.01: failed command: READ DMA EXT [37382.465831] ata2.01: cmd 25/00:08:80:b1:fa/00:00:9e:00:00/e0 tag 11 dma 4096 in [37382.465831] res 51/40:00:80:b1:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37382.480832] ata2.01: status: { DRDY ERR } [37382.484823] ata2.01: error: { UNC } [37382.488306] ata2.15: hard resetting link [37382.999427] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37383.006725] ata2.00: limiting SATA link speed to 1.5 Gbps [37383.012219] ata2.03: limiting SATA link speed to 1.5 Gbps [37383.017594] ata2.00: hard resetting link [37383.360213] ata2.01: hard resetting link [37383.869676] ata2.02: hard resetting link [37384.379688] ata2.03: hard resetting link [37384.769457] ata2.01: configured for UDMA/133 [37384.819470] ata2.02: configured for UDMA/133 [37384.823942] sd 1:1:0:0: [sde] tag#11 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37384.832198] sd 1:1:0:0: [sde] tag#11 Sense Key : 0x3 [current] [37384.838095] sd 1:1:0:0: [sde] tag#11 ASC=0x11 ASCQ=0x4 [37384.843337] sd 1:1:0:0: [sde] tag#11 CDB: opcode=0x28 28 00 9e fa b1 80 00 00 08 00 [37384.850975] print_req_error: I/O error, dev sde, sector 2667229568 [37384.857129] md/raid:md0: read error not correctable (sector 2660675048 on sde8). [37384.864930] ata2: EH complete [37388.569830] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37388.576250] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37388.584672] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37388.591126] ata2.01: failed command: READ DMA EXT [37388.595825] ata2.01: cmd 25/00:08:d0:b1:fa/00:00:9e:00:00/e0 tag 30 dma 4096 in [37388.595825] res 51/40:00:d0:b1:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37388.610805] ata2.01: status: { DRDY ERR } [37388.614799] ata2.01: error: { UNC } [37388.618279] ata2.15: hard resetting link [37389.129419] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37389.136720] ata2.00: limiting SATA link speed to 1.5 Gbps [37389.142231] ata2.03: limiting SATA link speed to 1.5 Gbps [37389.147615] ata2.00: hard resetting link [37389.490188] ata2.01: hard resetting link [37389.999702] ata2.02: hard resetting link [37390.509678] ata2.03: hard resetting link [37390.899474] ata2.01: configured for UDMA/133 [37390.949466] ata2.02: configured for UDMA/133 [37390.953934] sd 1:1:0:0: [sde] tag#30 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37390.962205] sd 1:1:0:0: [sde] tag#30 Sense Key : 0x3 [current] [37390.968106] sd 1:1:0:0: [sde] tag#30 ASC=0x11 ASCQ=0x4 [37390.973340] sd 1:1:0:0: [sde] tag#30 CDB: opcode=0x28 28 00 9e fa b1 d0 00 00 08 00 [37390.980995] print_req_error: I/O error, dev sde, sector 2667229648 [37390.987149] md/raid:md0: read error not correctable (sector 2660675128 on sde8). [37390.994593] ata2: EH complete [37394.879822] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37394.886240] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37394.894676] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37394.901108] ata2.01: failed command: READ DMA EXT [37394.905806] ata2.01: cmd 25/00:00:f8:c2:fa/00:04:9e:00:00/e0 tag 12 dma 524288 in [37394.905806] res 51/40:00:68:c4:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37394.920959] ata2.01: status: { DRDY ERR } [37394.924954] ata2.01: error: { UNC } [37394.928436] ata2.15: hard resetting link [37395.439422] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37395.446717] ata2.00: limiting SATA link speed to 1.5 Gbps [37395.452212] ata2.03: limiting SATA link speed to 1.5 Gbps [37395.457587] ata2.00: hard resetting link [37395.800189] ata2.01: hard resetting link [37396.309679] ata2.02: hard resetting link [37396.819676] ata2.03: hard resetting link [37397.209459] ata2.01: configured for UDMA/133 [37397.259458] ata2.02: configured for UDMA/133 [37397.266659] sd 1:1:0:0: [sde] tag#12 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37397.276278] sd 1:1:0:0: [sde] tag#12 Sense Key : 0x3 [current] [37397.282469] sd 1:1:0:0: [sde] tag#12 ASC=0x11 ASCQ=0x4 [37397.287683] sd 1:1:0:0: [sde] tag#12 CDB: opcode=0x28 28 00 9e fa c2 f8 00 04 00 00 [37397.295352] print_req_error: I/O error, dev sde, sector 2667234408 [37397.301527] md/raid:md0: read error not correctable (sector 2660679888 on sde8). [37397.308955] md/raid:md0: read error not correctable (sector 2660679896 on sde8). [37397.316389] md/raid:md0: read error not correctable (sector 2660679904 on sde8). [37397.323846] md/raid:md0: read error not correctable (sector 2660679912 on sde8). [37397.331282] md/raid:md0: read error not correctable (sector 2660679920 on sde8). [37397.338696] md/raid:md0: read error not correctable (sector 2660679928 on sde8). [37397.346143] md/raid:md0: read error not correctable (sector 2660679936 on sde8). [37397.353572] md/raid:md0: read error not correctable (sector 2660679944 on sde8). [37397.361022] md/raid:md0: read error not correctable (sector 2660679952 on sde8). [37397.368435] md/raid:md0: read error not correctable (sector 2660679960 on sde8). [37397.379013] ata2: EH complete [37400.959948] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37400.966401] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37400.974854] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37400.981342] ata2.01: failed command: READ DMA EXT [37400.986068] ata2.01: cmd 25/00:00:f8:ea:fa/00:04:9e:00:00/e0 tag 18 dma 524288 in [37400.986068] res 51/40:00:f0:ed:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37401.001247] ata2.01: status: { DRDY ERR } [37401.005265] ata2.01: error: { UNC } [37401.008776] ata2.15: hard resetting link [37401.519420] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37401.526723] ata2.00: limiting SATA link speed to 1.5 Gbps [37401.532249] ata2.03: limiting SATA link speed to 1.5 Gbps [37401.537625] ata2.00: hard resetting link [37401.880187] ata2.01: hard resetting link [37402.389694] ata2.02: hard resetting link [37402.899679] ata2.03: hard resetting link [37403.289476] ata2.01: configured for UDMA/133 [37403.339459] ata2.02: configured for UDMA/133 [37403.346749] sd 1:1:0:0: [sde] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37403.358523] sd 1:1:0:0: [sde] tag#18 Sense Key : 0x3 [current] [37403.365083] sd 1:1:0:0: [sde] tag#18 ASC=0x11 ASCQ=0x4 [37403.370340] sd 1:1:0:0: [sde] tag#18 CDB: opcode=0x28 28 00 9e fa ea f8 00 04 00 00 [37403.377963] print_req_error: I/O error, dev sde, sector 2667245040 [37403.384130] raid5_end_read_request: 72 callbacks suppressed [37403.384137] md/raid:md0: read error not correctable (sector 2660690520 on sde8). [37403.397109] md/raid:md0: read error not correctable (sector 2660690528 on sde8). [37403.404673] md/raid:md0: read error not correctable (sector 2660690536 on sde8). [37403.412106] md/raid:md0: read error not correctable (sector 2660690544 on sde8). [37403.419485] md/raid:md0: read error not correctable (sector 2660690552 on sde8). [37403.426846] md/raid:md0: read error not correctable (sector 2660690560 on sde8). [37403.434243] md/raid:md0: read error not correctable (sector 2660690568 on sde8). [37403.441627] md/raid:md0: read error not correctable (sector 2660690576 on sde8). [37403.448990] md/raid:md0: read error not correctable (sector 2660690584 on sde8). [37403.456397] md/raid:md0: read error not correctable (sector 2660690592 on sde8). [37403.463873] ata2: EH complete [37407.019810] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37407.026227] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37407.034649] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37407.041077] ata2.01: failed command: READ DMA EXT [37407.045776] ata2.01: cmd 25/00:00:f8:fe:fa/00:04:9e:00:00/e0 tag 16 dma 524288 in [37407.045776] res 51/40:00:28:00:fb/40:00:9e:00:00/00 Emask 0x9 (media error) [37407.060962] ata2.01: status: { DRDY ERR } [37407.064958] ata2.01: error: { UNC } [37407.068439] ata2.15: hard resetting link [37407.579437] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37407.586740] ata2.00: limiting SATA link speed to 1.5 Gbps [37407.592232] ata2.03: limiting SATA link speed to 1.5 Gbps [37407.597609] ata2.00: hard resetting link [37407.940196] ata2.01: hard resetting link [37408.449678] ata2.02: hard resetting link [37408.959676] ata2.03: hard resetting link [37409.349462] ata2.01: configured for UDMA/133 [37409.399473] ata2.02: configured for UDMA/133 [37409.404258] sd 1:1:0:0: [sde] tag#16 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37409.412517] sd 1:1:0:0: [sde] tag#16 Sense Key : 0x3 [current] [37409.418411] sd 1:1:0:0: [sde] tag#16 ASC=0x11 ASCQ=0x4 [37409.423630] sd 1:1:0:0: [sde] tag#16 CDB: opcode=0x28 28 00 9e fa fe f8 00 04 00 00 [37409.431270] print_req_error: I/O error, dev sde, sector 2667249704 [37409.437427] raid5_end_read_request: 23 callbacks suppressed [37409.437433] md/raid:md0: read error not correctable (sector 2660695184 on sde8). [37409.450365] md/raid:md0: read error not correctable (sector 2660695192 on sde8). [37409.457730] md/raid:md0: read error not correctable (sector 2660695200 on sde8). [37409.465104] md/raid:md0: read error not correctable (sector 2660695208 on sde8). [37409.472482] md/raid:md0: read error not correctable (sector 2660695216 on sde8). [37409.479862] md/raid:md0: read error not correctable (sector 2660695224 on sde8). [37409.487226] md/raid:md0: read error not correctable (sector 2660695232 on sde8). [37409.494601] md/raid:md0: read error not correctable (sector 2660695240 on sde8). [37409.502021] md/raid:md0: read error not correctable (sector 2660695248 on sde8). [37409.509404] md/raid:md0: read error not correctable (sector 2660695256 on sde8). [37409.516991] ata2: EH complete [37412.989808] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37412.996225] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37413.004659] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37413.011094] ata2.01: failed command: READ DMA EXT [37413.015791] ata2.01: cmd 25/00:00:f8:12:fb/00:04:9e:00:00/e0 tag 27 dma 524288 in [37413.015791] res 51/40:00:a0:14:fb/40:00:9e:00:00/00 Emask 0x9 (media error) [37413.030944] ata2.01: status: { DRDY ERR } [37413.034938] ata2.01: error: { UNC } [37413.038418] ata2.15: hard resetting link [37413.549435] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37413.556838] ata2.00: limiting SATA link speed to 1.5 Gbps [37413.562327] ata2.03: limiting SATA link speed to 1.5 Gbps [37413.567711] ata2.00: hard resetting link [37413.910188] ata2.01: hard resetting link [37414.419682] ata2.02: hard resetting link [37414.929676] ata2.03: hard resetting link [37415.319462] ata2.01: configured for UDMA/133 [37415.369462] ata2.02: configured for UDMA/133 [37415.374261] sd 1:1:0:0: [sde] tag#27 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37415.382518] sd 1:1:0:0: [sde] tag#27 Sense Key : 0x3 [current] [37415.388417] sd 1:1:0:0: [sde] tag#27 ASC=0x11 ASCQ=0x4 [37415.393665] sd 1:1:0:0: [sde] tag#27 CDB: opcode=0x28 28 00 9e fb 12 f8 00 04 00 00 [37415.401305] print_req_error: I/O error, dev sde, sector 2667254944 [37415.407459] raid5_end_read_request: 80 callbacks suppressed [37415.407465] md/raid:md0: read error not correctable (sector 2660700424 on sde8). [37415.420397] md/raid:md0: read error not correctable (sector 2660700432 on sde8). [37415.427762] md/raid:md0: read error not correctable (sector 2660700440 on sde8). [37415.435142] md/raid:md0: read error not correctable (sector 2660700448 on sde8). [37415.442515] md/raid:md0: read error not correctable (sector 2660700456 on sde8). [37415.449893] md/raid:md0: read error not correctable (sector 2660700464 on sde8). [37415.457259] md/raid:md0: read error not correctable (sector 2660700472 on sde8). [37415.464634] md/raid:md0: read error not correctable (sector 2660700480 on sde8). [37415.472012] md/raid:md0: read error not correctable (sector 2660700488 on sde8). [37415.479378] md/raid:md0: read error not correctable (sector 2660700496 on sde8). [37415.486928] ata2: EH complete [37419.719827] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37419.726248] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37419.734672] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37419.741099] ata2.01: failed command: READ DMA EXT [37419.745798] ata2.01: cmd 25/00:00:f8:4e:fb/00:04:9e:00:00/e0 tag 11 dma 524288 in [37419.745798] res 51/40:00:a0:50:fb/40:00:9e:00:00/00 Emask 0x9 (media error) [37419.760950] ata2.01: status: { DRDY ERR } [37419.764945] ata2.01: error: { UNC } [37419.768427] ata2.15: hard resetting link [37420.279486] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37420.286788] ata2.00: limiting SATA link speed to 1.5 Gbps [37420.292284] ata2.03: limiting SATA link speed to 1.5 Gbps [37420.297666] ata2.00: hard resetting link [37420.640190] ata2.01: hard resetting link [37421.149679] ata2.02: hard resetting link [37421.659680] ata2.03: hard resetting link [37422.049463] ata2.01: configured for UDMA/133 [37422.099463] ata2.02: configured for UDMA/133 [37422.104261] sd 1:1:0:0: [sde] tag#11 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37422.112514] sd 1:1:0:0: [sde] tag#11 Sense Key : 0x3 [current] [37422.118408] sd 1:1:0:0: [sde] tag#11 ASC=0x11 ASCQ=0x4 [37422.123637] sd 1:1:0:0: [sde] tag#11 CDB: opcode=0x28 28 00 9e fb 4e f8 00 04 00 00 [37422.131275] print_req_error: I/O error, dev sde, sector 2667270304 [37422.137432] raid5_end_read_request: 65 callbacks suppressed [37422.137438] md/raid:md0: read error not correctable (sector 2660715784 on sde8). [37422.150379] md/raid:md0: read error not correctable (sector 2660715792 on sde8). [37422.157744] md/raid:md0: read error not correctable (sector 2660715800 on sde8). [37422.165146] md/raid:md0: read error not correctable (sector 2660715808 on sde8). [37422.172526] md/raid:md0: read error not correctable (sector 2660715816 on sde8). [37422.179901] md/raid:md0: read error not correctable (sector 2660715824 on sde8). [37422.187266] md/raid:md0: read error not correctable (sector 2660715832 on sde8). [37422.194641] md/raid:md0: read error not correctable (sector 2660715840 on sde8). [37422.202019] md/raid:md0: read error not correctable (sector 2660715848 on sde8). [37422.209385] md/raid:md0: read error not correctable (sector 2660715856 on sde8). [37422.216944] ata2: EH complete [37425.759851] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37425.766274] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37425.774707] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37425.781137] ata2.01: failed command: READ DMA EXT [37425.785841] ata2.01: cmd 25/00:08:68:c4:fa/00:00:9e:00:00/e0 tag 25 dma 4096 in [37425.785841] res 51/40:00:68:c4:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37425.800820] ata2.01: status: { DRDY ERR } [37425.804815] ata2.01: error: { UNC } [37425.808295] ata2.15: hard resetting link [37426.319425] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37426.326731] ata2.00: limiting SATA link speed to 1.5 Gbps [37426.332242] ata2.03: limiting SATA link speed to 1.5 Gbps [37426.337622] ata2.00: hard resetting link [37426.680192] ata2.01: hard resetting link [37427.189680] ata2.02: hard resetting link [37427.699680] ata2.03: hard resetting link [37428.089466] ata2.01: configured for UDMA/133 [37428.139465] ata2.02: configured for UDMA/133 [37428.143934] sd 1:1:0:0: [sde] tag#25 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37428.152214] sd 1:1:0:0: [sde] tag#25 Sense Key : 0x3 [current] [37428.158114] sd 1:1:0:0: [sde] tag#25 ASC=0x11 ASCQ=0x4 [37428.163343] sd 1:1:0:0: [sde] tag#25 CDB: opcode=0x28 28 00 9e fa c4 68 00 00 08 00 [37428.170981] print_req_error: I/O error, dev sde, sector 2667234408 [37428.177137] raid5_end_read_request: 65 callbacks suppressed [37428.177143] md/raid:md0: read error not correctable (sector 2660679888 on sde8). [37428.190134] ata2: EH complete [37431.529826] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37431.536247] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37431.544670] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37431.551100] ata2.01: failed command: READ DMA EXT [37431.555797] ata2.01: cmd 25/00:08:70:c4:fa/00:00:9e:00:00/e0 tag 28 dma 4096 in [37431.555797] res 51/40:00:70:c4:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37431.570777] ata2.01: status: { DRDY ERR } [37431.574772] ata2.01: error: { UNC } [37431.578251] ata2.15: hard resetting link [37432.089422] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37432.096716] ata2.00: limiting SATA link speed to 1.5 Gbps [37432.102202] ata2.03: limiting SATA link speed to 1.5 Gbps [37432.107577] ata2.00: hard resetting link [37432.450211] ata2.01: hard resetting link [37432.959693] ata2.02: hard resetting link [37433.469704] ata2.03: hard resetting link [37433.859468] ata2.01: configured for UDMA/133 [37433.909465] ata2.02: configured for UDMA/133 [37433.913934] sd 1:1:0:0: [sde] tag#28 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37433.922189] sd 1:1:0:0: [sde] tag#28 Sense Key : 0x3 [current] [37433.928086] sd 1:1:0:0: [sde] tag#28 ASC=0x11 ASCQ=0x4 [37433.933305] sd 1:1:0:0: [sde] tag#28 CDB: opcode=0x28 28 00 9e fa c4 70 00 00 08 00 [37433.940945] print_req_error: I/O error, dev sde, sector 2667234416 [37433.947103] md/raid:md0: read error not correctable (sector 2660679896 on sde8). [37433.954533] ata2: EH complete [37437.459808] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37437.466226] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37437.474649] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37437.481075] ata2.01: failed command: READ DMA EXT [37437.485774] ata2.01: cmd 25/00:08:80:c4:fa/00:00:9e:00:00/e0 tag 10 dma 4096 in [37437.485774] res 51/40:00:80:c4:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37437.500753] ata2.01: status: { DRDY ERR } [37437.504740] ata2.01: error: { UNC } [37437.508222] ata2.15: hard resetting link [37438.019423] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37438.026720] ata2.00: limiting SATA link speed to 1.5 Gbps [37438.032214] ata2.03: limiting SATA link speed to 1.5 Gbps [37438.037589] ata2.00: hard resetting link [37438.380197] ata2.01: hard resetting link [37438.889683] ata2.02: hard resetting link [37439.399682] ata2.03: hard resetting link [37439.789467] ata2.01: configured for UDMA/133 [37439.839467] ata2.02: configured for UDMA/133 [37439.843933] sd 1:1:0:0: [sde] tag#10 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37439.852184] sd 1:1:0:0: [sde] tag#10 Sense Key : 0x3 [current] [37439.858082] sd 1:1:0:0: [sde] tag#10 ASC=0x11 ASCQ=0x4 [37439.863301] sd 1:1:0:0: [sde] tag#10 CDB: opcode=0x28 28 00 9e fa c4 80 00 00 08 00 [37439.870965] print_req_error: I/O error, dev sde, sector 2667234432 [37439.877124] md/raid:md0: read error not correctable (sector 2660679912 on sde8). [37439.884557] ata2: EH complete [37443.629815] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37443.636230] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37443.644678] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37443.651111] ata2.01: failed command: READ DMA EXT [37443.655813] ata2.01: cmd 25/00:08:f8:c4:fa/00:00:9e:00:00/e0 tag 24 dma 4096 in [37443.655813] res 51/40:00:f8:c4:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37443.670794] ata2.01: status: { DRDY ERR } [37443.674789] ata2.01: error: { UNC } [37443.678269] ata2.15: hard resetting link [37444.189427] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37444.196724] ata2.00: limiting SATA link speed to 1.5 Gbps [37444.202211] ata2.03: limiting SATA link speed to 1.5 Gbps [37444.207623] ata2.00: hard resetting link [37444.550196] ata2.01: hard resetting link [37445.059683] ata2.02: hard resetting link [37445.569685] ata2.03: hard resetting link [37445.959468] ata2.01: configured for UDMA/133 [37446.009467] ata2.02: configured for UDMA/133 [37446.013938] sd 1:1:0:0: [sde] tag#24 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37446.022189] sd 1:1:0:0: [sde] tag#24 Sense Key : 0x3 [current] [37446.028087] sd 1:1:0:0: [sde] tag#24 ASC=0x11 ASCQ=0x4 [37446.033306] sd 1:1:0:0: [sde] tag#24 CDB: opcode=0x28 28 00 9e fa c4 f8 00 00 08 00 [37446.040945] print_req_error: I/O error, dev sde, sector 2667234552 [37446.047105] md/raid:md0: read error not correctable (sector 2660680032 on sde8). [37446.054543] ata2: EH complete [37449.399812] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37449.406230] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37449.414651] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37449.421082] ata2.01: failed command: READ DMA EXT [37449.425778] ata2.01: cmd 25/00:08:00:c5:fa/00:00:9e:00:00/e0 tag 27 dma 4096 in [37449.425778] res 51/40:00:00:c5:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37449.440758] ata2.01: status: { DRDY ERR } [37449.444754] ata2.01: error: { UNC } [37449.448233] ata2.15: hard resetting link [37449.959426] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37449.966722] ata2.00: limiting SATA link speed to 1.5 Gbps [37449.972210] ata2.03: limiting SATA link speed to 1.5 Gbps [37449.977587] ata2.00: hard resetting link [37450.320197] ata2.01: hard resetting link [37450.829688] ata2.02: hard resetting link [37451.339687] ata2.03: hard resetting link [37451.729470] ata2.01: configured for UDMA/133 [37451.779468] ata2.02: configured for UDMA/133 [37451.783937] sd 1:1:0:0: [sde] tag#27 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37451.792187] sd 1:1:0:0: [sde] tag#27 Sense Key : 0x3 [current] [37451.798086] sd 1:1:0:0: [sde] tag#27 ASC=0x11 ASCQ=0x4 [37451.803305] sd 1:1:0:0: [sde] tag#27 CDB: opcode=0x28 28 00 9e fa c5 00 00 00 08 00 [37451.810945] print_req_error: I/O error, dev sde, sector 2667234560 [37451.817103] md/raid:md0: read error not correctable (sector 2660680040 on sde8). [37451.824526] ata2: EH complete [37455.169814] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37455.176230] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37455.184675] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37455.191110] ata2.01: failed command: READ DMA EXT [37455.195813] ata2.01: cmd 25/00:08:08:c5:fa/00:00:9e:00:00/e0 tag 30 dma 4096 in [37455.195813] res 51/40:00:08:c5:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37455.210814] ata2.01: status: { DRDY ERR } [37455.214804] ata2.01: error: { UNC } [37455.218284] ata2.15: hard resetting link [37455.729442] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37455.736741] ata2.00: limiting SATA link speed to 1.5 Gbps [37455.742260] ata2.03: limiting SATA link speed to 1.5 Gbps [37455.747638] ata2.00: hard resetting link [37456.090214] ata2.01: hard resetting link [37456.599702] ata2.02: hard resetting link [37457.109701] ata2.03: hard resetting link [37457.499471] ata2.01: configured for UDMA/133 [37457.549487] ata2.02: configured for UDMA/133 [37457.553956] sd 1:1:0:0: [sde] tag#30 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37457.562205] sd 1:1:0:0: [sde] tag#30 Sense Key : 0x3 [current] [37457.568103] sd 1:1:0:0: [sde] tag#30 ASC=0x11 ASCQ=0x4 [37457.573344] sd 1:1:0:0: [sde] tag#30 CDB: opcode=0x28 28 00 9e fa c5 08 00 00 08 00 [37457.581005] print_req_error: I/O error, dev sde, sector 2667234568 [37457.587163] md/raid:md0: read error not correctable (sector 2660680048 on sde8). [37457.594622] ata2: EH complete [37461.099843] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37461.106259] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37461.114681] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37461.121111] ata2.01: failed command: READ DMA EXT [37461.125808] ata2.01: cmd 25/00:08:f0:ed:fa/00:00:9e:00:00/e0 tag 24 dma 4096 in [37461.125808] res 51/40:00:f0:ed:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37461.140787] ata2.01: status: { DRDY ERR } [37461.144781] ata2.01: error: { UNC } [37461.148262] ata2.15: hard resetting link [37461.659428] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37461.666728] ata2.00: limiting SATA link speed to 1.5 Gbps [37461.672222] ata2.03: limiting SATA link speed to 1.5 Gbps [37461.677598] ata2.00: hard resetting link [37462.020198] ata2.01: hard resetting link [37462.529706] ata2.02: hard resetting link [37463.039687] ata2.03: hard resetting link [37463.429474] ata2.01: configured for UDMA/133 [37463.479475] ata2.02: configured for UDMA/133 [37463.483948] sd 1:1:0:0: [sde] tag#24 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37463.492214] sd 1:1:0:0: [sde] tag#24 Sense Key : 0x3 [current] [37463.498115] sd 1:1:0:0: [sde] tag#24 ASC=0x11 ASCQ=0x4 [37463.503335] sd 1:1:0:0: [sde] tag#24 CDB: opcode=0x28 28 00 9e fa ed f0 00 00 08 00 [37463.510974] print_req_error: I/O error, dev sde, sector 2667245040 [37463.517132] md/raid:md0: read error not correctable (sector 2660690520 on sde8). [37463.524577] ata2: EH complete [37466.779814] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37466.786229] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37466.794652] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37466.801081] ata2.01: failed command: READ DMA EXT [37466.805778] ata2.01: cmd 25/00:08:f8:ed:fa/00:00:9e:00:00/e0 tag 27 dma 4096 in [37466.805778] res 51/40:00:f8:ed:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37466.820757] ata2.01: status: { DRDY ERR } [37466.824753] ata2.01: error: { UNC } [37466.828233] ata2.15: hard resetting link [37467.339428] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37467.346722] ata2.00: limiting SATA link speed to 1.5 Gbps [37467.352235] ata2.03: limiting SATA link speed to 1.5 Gbps [37467.357612] ata2.00: hard resetting link [37467.700199] ata2.01: hard resetting link [37468.209688] ata2.02: hard resetting link [37468.719689] ata2.03: hard resetting link [37469.109473] ata2.01: configured for UDMA/133 [37469.159473] ata2.02: configured for UDMA/133 [37469.163936] sd 1:1:0:0: [sde] tag#27 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37469.172211] sd 1:1:0:0: [sde] tag#27 Sense Key : 0x3 [current] [37469.178111] sd 1:1:0:0: [sde] tag#27 ASC=0x11 ASCQ=0x4 [37469.183331] sd 1:1:0:0: [sde] tag#27 CDB: opcode=0x28 28 00 9e fa ed f8 00 00 08 00 [37469.190971] print_req_error: I/O error, dev sde, sector 2667245048 [37469.197128] md/raid:md0: read error not correctable (sector 2660690528 on sde8). [37469.204553] ata2: EH complete [37472.549828] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37472.556244] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37472.564668] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37472.571099] ata2.01: failed command: READ DMA EXT [37472.575794] ata2.01: cmd 25/00:08:00:ee:fa/00:00:9e:00:00/e0 tag 30 dma 4096 in [37472.575794] res 51/40:00:00:ee:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37472.590773] ata2.01: status: { DRDY ERR } [37472.594761] ata2.01: error: { UNC } [37472.598240] ata2.15: hard resetting link [37473.109432] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37473.116734] ata2.00: limiting SATA link speed to 1.5 Gbps [37473.122226] ata2.03: limiting SATA link speed to 1.5 Gbps [37473.127603] ata2.00: hard resetting link [37473.470330] ata2.01: hard resetting link [37473.979695] ata2.02: hard resetting link [37474.489693] ata2.03: hard resetting link [37474.879474] ata2.01: configured for UDMA/133 [37474.929514] ata2.02: configured for UDMA/133 [37474.934030] sd 1:1:0:0: [sde] tag#30 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37474.942302] sd 1:1:0:0: [sde] tag#30 Sense Key : 0x3 [current] [37474.948217] sd 1:1:0:0: [sde] tag#30 ASC=0x11 ASCQ=0x4 [37474.953475] sd 1:1:0:0: [sde] tag#30 CDB: opcode=0x28 28 00 9e fa ee 00 00 00 08 00 [37474.961119] print_req_error: I/O error, dev sde, sector 2667245056 [37474.967274] md/raid:md0: read error not correctable (sector 2660690536 on sde8). [37474.974706] ata2: EH complete [37478.319816] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37478.326236] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37478.334682] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37478.341114] ata2.01: failed command: READ DMA EXT [37478.345812] ata2.01: cmd 25/00:08:08:ee:fa/00:00:9e:00:00/e0 tag 2 dma 4096 in [37478.345812] res 51/40:00:08:ee:fa/40:00:9e:00:00/00 Emask 0x9 (media error) [37478.360726] ata2.01: status: { DRDY ERR } [37478.364717] ata2.01: error: { UNC } [37478.368200] ata2.15: hard resetting link [37478.879446] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37478.886740] ata2.00: limiting SATA link speed to 1.5 Gbps [37478.892226] ata2.03: limiting SATA link speed to 1.5 Gbps [37478.897601] ata2.00: hard resetting link [37479.240221] ata2.01: hard resetting link [37479.749695] ata2.02: hard resetting link [37480.259705] ata2.03: hard resetting link [37480.649477] ata2.01: configured for UDMA/133 [37480.699498] ata2.02: configured for UDMA/133 [37480.703962] sd 1:1:0:0: [sde] tag#2 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37480.712127] sd 1:1:0:0: [sde] tag#2 Sense Key : 0x3 [current] [37480.717938] sd 1:1:0:0: [sde] tag#2 ASC=0x11 ASCQ=0x4 [37480.723105] sd 1:1:0:0: [sde] tag#2 CDB: opcode=0x28 28 00 9e fa ee 08 00 00 08 00 [37480.730661] print_req_error: I/O error, dev sde, sector 2667245064 [37480.736816] md/raid:md0: read error not correctable (sector 2660690544 on sde8). [37480.744267] ata2: EH complete [37484.069839] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37484.076261] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37484.084720] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37484.091157] ata2.01: failed command: READ DMA EXT [37484.095852] ata2.01: cmd 25/00:08:28:00:fb/00:00:9e:00:00/e0 tag 10 dma 4096 in [37484.095852] res 51/40:00:28:00:fb/40:00:9e:00:00/00 Emask 0x9 (media error) [37484.110855] ata2.01: status: { DRDY ERR } [37484.114844] ata2.01: error: { UNC } [37484.118326] ata2.15: hard resetting link [37484.629448] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37484.636747] ata2.00: limiting SATA link speed to 1.5 Gbps [37484.642241] ata2.03: limiting SATA link speed to 1.5 Gbps [37484.647617] ata2.00: hard resetting link [37484.990219] ata2.01: hard resetting link [37485.499696] ata2.02: hard resetting link [37486.009707] ata2.03: hard resetting link [37486.399479] ata2.01: configured for UDMA/133 [37486.449491] ata2.02: configured for UDMA/133 [37486.453961] sd 1:1:0:0: [sde] tag#10 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37486.462211] sd 1:1:0:0: [sde] tag#10 Sense Key : 0x3 [current] [37486.468107] sd 1:1:0:0: [sde] tag#10 ASC=0x11 ASCQ=0x4 [37486.473360] sd 1:1:0:0: [sde] tag#10 CDB: opcode=0x28 28 00 9e fb 00 28 00 00 08 00 [37486.481022] print_req_error: I/O error, dev sde, sector 2667249704 [37486.487195] md/raid:md0: read error not correctable (sector 2660695184 on sde8). [37486.494714] ata2: EH complete [37490.039846] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37490.046268] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37490.054691] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37490.061118] ata2.01: failed command: READ DMA EXT [37490.065816] ata2.01: cmd 25/00:08:a0:14:fb/00:00:9e:00:00/e0 tag 12 dma 4096 in [37490.065816] res 51/40:00:a0:14:fb/40:00:9e:00:00/00 Emask 0x9 (media error) [37490.080847] ata2.01: status: { DRDY ERR } [37490.084842] ata2.01: error: { UNC } [37490.088327] ata2.15: hard resetting link [37490.599437] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37490.606740] ata2.00: limiting SATA link speed to 1.5 Gbps [37490.612230] ata2.03: limiting SATA link speed to 1.5 Gbps [37490.617606] ata2.00: hard resetting link [37490.960203] ata2.01: hard resetting link [37491.469694] ata2.02: hard resetting link [37491.979693] ata2.03: hard resetting link [37492.369479] ata2.01: configured for UDMA/133 [37492.419478] ata2.02: configured for UDMA/133 [37492.423955] sd 1:1:0:0: [sde] tag#12 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37492.432208] sd 1:1:0:0: [sde] tag#12 Sense Key : 0x3 [current] [37492.438106] sd 1:1:0:0: [sde] tag#12 ASC=0x11 ASCQ=0x4 [37492.443325] sd 1:1:0:0: [sde] tag#12 CDB: opcode=0x28 28 00 9e fb 14 a0 00 00 08 00 [37492.450965] print_req_error: I/O error, dev sde, sector 2667254944 [37492.457123] md/raid:md0: read error not correctable (sector 2660700424 on sde8). [37492.464558] ata2: EH complete [37495.809823] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37495.816240] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37495.824665] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37495.831091] ata2.01: failed command: READ DMA EXT [37495.835790] ata2.01: cmd 25/00:08:a8:14:fb/00:00:9e:00:00/e0 tag 15 dma 4096 in [37495.835790] res 51/40:00:a8:14:fb/40:00:9e:00:00/00 Emask 0x9 (media error) [37495.850789] ata2.01: status: { DRDY ERR } [37495.854800] ata2.01: error: { UNC } [37495.858297] ata2.15: hard resetting link [37496.369434] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37496.376735] ata2.00: limiting SATA link speed to 1.5 Gbps [37496.382230] ata2.03: limiting SATA link speed to 1.5 Gbps [37496.387605] ata2.00: hard resetting link [37496.730207] ata2.01: hard resetting link [37497.239695] ata2.02: hard resetting link [37497.749692] ata2.03: hard resetting link [37498.139478] ata2.01: configured for UDMA/133 [37498.189478] ata2.02: configured for UDMA/133 [37498.193950] sd 1:1:0:0: [sde] tag#15 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37498.202199] sd 1:1:0:0: [sde] tag#15 Sense Key : 0x3 [current] [37498.208097] sd 1:1:0:0: [sde] tag#15 ASC=0x11 ASCQ=0x4 [37498.213341] sd 1:1:0:0: [sde] tag#15 CDB: opcode=0x28 28 00 9e fb 14 a8 00 00 08 00 [37498.220983] print_req_error: I/O error, dev sde, sector 2667254952 [37498.227140] md/raid:md0: read error not correctable (sector 2660700432 on sde8). [37498.234564] ata2: EH complete [37503.079882] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37503.086300] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37503.094732] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37503.101185] ata2.01: failed command: READ DMA EXT [37503.105884] ata2.01: cmd 25/00:08:90:16:fb/00:00:9e:00:00/e0 tag 30 dma 4096 in [37503.105884] res 51/40:00:90:16:fb/40:00:9e:00:00/00 Emask 0x9 (media error) [37503.120864] ata2.01: status: { DRDY ERR } [37503.124858] ata2.01: error: { UNC } [37503.128338] ata2.15: hard resetting link [37503.639457] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37503.646756] ata2.00: limiting SATA link speed to 1.5 Gbps [37503.652268] ata2.03: limiting SATA link speed to 1.5 Gbps [37503.657648] ata2.00: hard resetting link [37504.000209] ata2.01: hard resetting link [37504.509716] ata2.02: hard resetting link [37505.019699] ata2.03: hard resetting link [37505.409497] ata2.01: configured for UDMA/133 [37505.459491] ata2.02: configured for UDMA/133 [37505.463961] sd 1:1:0:0: [sde] tag#30 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37505.472238] sd 1:1:0:0: [sde] tag#30 Sense Key : 0x3 [current] [37505.478139] sd 1:1:0:0: [sde] tag#30 ASC=0x11 ASCQ=0x4 [37505.483359] sd 1:1:0:0: [sde] tag#30 CDB: opcode=0x28 28 00 9e fb 16 90 00 00 08 00 [37505.491019] print_req_error: I/O error, dev sde, sector 2667255440 [37505.497173] md/raid:md0: read error not correctable (sector 2660700920 on sde8). [37505.504639] ata2: EH complete [37509.219872] ata2.15: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6 [37509.226290] ata2.15: edma_err_cause=00000084 pp_flags=00000001, dev error, EDMA self-disable [37509.234738] ata2.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [37509.241169] ata2.01: failed command: READ DMA EXT [37509.245865] ata2.01: cmd 25/00:08:a0:50:fb/00:00:9e:00:00/e0 tag 3 dma 4096 in [37509.245865] res 51/40:00:a0:50:fb/40:00:9e:00:00/00 Emask 0x9 (media error) [37509.260814] ata2.01: status: { DRDY ERR } [37509.264805] ata2.01: error: { UNC } [37509.268288] ata2.15: hard resetting link [37509.779452] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [37509.786752] ata2.00: limiting SATA link speed to 1.5 Gbps [37509.792245] ata2.03: limiting SATA link speed to 1.5 Gbps [37509.797629] ata2.00: hard resetting link [37510.140224] ata2.01: hard resetting link [37510.649702] ata2.02: hard resetting link [37511.159712] ata2.03: hard resetting link [37511.549482] ata2.01: configured for UDMA/133 [37511.599496] ata2.02: configured for UDMA/133 [37511.603967] sd 1:1:0:0: [sde] tag#3 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [37511.612136] sd 1:1:0:0: [sde] tag#3 Sense Key : 0x3 [current] [37511.617947] sd 1:1:0:0: [sde] tag#3 ASC=0x11 ASCQ=0x4 [37511.623119] sd 1:1:0:0: [sde] tag#3 CDB: opcode=0x28 28 00 9e fb 50 a0 00 00 08 00 [37511.630670] print_req_error: I/O error, dev sde, sector 2667270304 [37511.636826] md/raid:md0: read error not correctable (sector 2660715784 on sde8). [37511.644280] ata2: EH complete [54861.583516] md: md0: recovery done.

by **Jocko** » Mon May 27, 2024 3:55 pm

Hi

Still I think you have some hardware issues :crazy
Please to post after rebooting

Code: Select all: mount cat /boot.log grep -A 150 disks /etc/nas_conf_db.xml

by **razzor0** » Mon May 27, 2024 4:13 pm

Well, doesnt look, I was wondering if its help if I will do reinstall once more only with one drive as before.

Code: Select all: root@fvdwsl-base:/ # mount /dev/sda1 on / type ext3 (rw,noatime,data=ordered) none on /proc type proc (rw,noatime) none on /sys type sysfs (rw,noatime) none on /dev/pts type devpts (rw,noatime,mode=600,ptmxmode=000) /dev/sda5 on /rw_fs type ext3 (rw,noatime,data=ordered) tmpfs on /rw_fs/tmp/usr/var type tmpfs (rw,noatime,size=5000k) nfsd on /proc/fs/nfsd type nfsd (rw,noatime) /dev/sda7 on /lacie-boot type ext3 (rw,noatime,data=ordered) /dev/sda7 on /lib/firmware type ext3 (rw,noatime,data=ordered) ____________________________________________________________________ root@fvdwsl-base:/ # cat /boot.log start boot log is a physical machine detect and set platform 5big2 kirkwood UIMAGE-414133-KIRKWOOD-5 Current kernel: 4.14.133 #5 PREEMPT Thu Aug 10 15:38:37 CEST 2023 device 5big2 family kirkwood Arm: found valid system disk sda system disk = sda mount dev/pts update dev nodes booting using sda1 root file system... enable IP forwarding... run udevstart to update dev nodes when necessary inserting kernel modules: modprobe: module 'iscsi_trgt' not found start buttons control daemon device = 5big2 source = buttons-nwsp2 buttons-nwsp2 daemon started Mon May 27 16:04:13 UTC 2024 configuration partition is rightly mounted create temporary passwd file create temporary group file set samba environment for version 3.0.37 configure loopback network interface setting reboot and standby 5big2 rebootd-nwsp2 5big2 standbyd-nwsp2 start fan starting php based setup routines step 1 * Initialize the volatile db file... [ OK ] * Starting udevd... [ OK ] * Starting RAID monitor: [ OK ] * Starting restore RAID devices... - Assembling device /dev/md0: [ Fail ] * Finishing restore RAID devices... [ Fail ] * Found database configuration file... [ OK ] * Updating Disks database... [ OK ] * Starting mount of volumes... * Finishing mount of volumes... [ OK ] * Generating Hosts File... [ OK ] * Configuring System Hostname... [ OK ] * Configuring LAN interface... [ OK ] * Initializing Timezone... [ OK ] * Starting web server... [ OK ] * Starting mount of internal USB ... Warning: Illegal string offset 'vol' in /etc/finc/dm_mount_internal_USB.finc on line 21 * Finishing mount internal USB ... [ OK ] * Configuring Disks... [ OK ] * Configuring Samba... [ OK ] * Configuring System Users... Root password: use default password Set users, linux and samba accounts [ OK ] * Starting Fvdw-sl Discovery Daemon... [ OK ] start rpcbind service starting php based setup routines step 2 * Starting dropbear... [ OK ] * Kill temporary dropbear... [ OK ] starting php based setup routines step 3 * Starting daemon update Hosts File... [ OK ] * Starting mount of remote shares... * Finishing mount shares... [ OK ] * Starting NTP client... [ OK ] Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 starting php based setup routines step banner *** fvdw-sl NAS firmware This is fvdw-sl version: fvdw-sl 18.3 built on: February 20 2024 LAN IP address: 192.168.188.46 (DHCP) Port configuration: LAN -> eth0 php based setup routines finished web permission on resolv.conf set device tuning for dms performance move smbd en nmbd db files away from ram disk to prevent hanging samba server ------------------------ Monitor if file system check is required on next booting Warning: file system on the firmware partitions will be checked on next nas booting ! Mount count: 10/10 on sda5 LED settings Send a boot mail notification to else loop1 finished rcS finished ____________________________________________________________________ root@fvdwsl-base:/ # grep -A 150 disks /etc/nas_conf_db.xml <disks> <disk> <size>1860.24909163</size> <internal>true</internal> <name>Disk-A</name> <system>true</system> <blockdev>/dev/sda</blockdev> <diskid>ZWD0ZJH1</diskid> <model>ST2000VN003-3CW102</model> <usb>false</usb> <freesize>0</freesize> <init>true</init> <partitions> <partition> <lvname>/dev/sda8</lvname> <color>#389e19</color> <volid>1100</volid> <index>0</index> <size>1860.24909163</size> </partition> </partitions> </disk> <disk> <size>1859.88115311</size> <internal>true</internal> <name>Disk-B</name> <system>false</system> <blockdev>/dev/sdb</blockdev> <diskid>5YD0WZXL</diskid> <model>ST2000DL001-9VT156</model> <usb>false</usb> <freesize>0</freesize> <init>true</init> <partitions> <partition> <lvname>/dev/sdb8</lvname> <color>#e5107c</color> <volid>1100</volid> <index>0</index> <size>1859.88115311</size> </partition> </partitions> </disk> <disk> <size>1859.88115311</size> <internal>true</internal> <name>Disk-C</name> <system>false</system> <blockdev>/dev/sdc</blockdev> <diskid>5YD0HZDF</diskid> <model>ST2000DL001-9VT156</model> <usb>false</usb> <freesize>0</freesize> <init>true</init> <partitions> <partition> <lvname>/dev/sdc8</lvname> <color>#a9ab17</color> <volid>1100</volid> <index>0</index> <size>1859.88115311</size> </partition> </partitions> </disk> <disk> <size>1859.88115311</size> <internal>true</internal> <name>Disk-D</name> <system>false</system> <blockdev>/dev/sdd</blockdev> <diskid>5YD0WJ11</diskid> <model>ST2000DL001-9VT156</model> <usb>false</usb> <freesize>0</freesize> <init>true</init> <partitions> <partition> <lvname>/dev/sdd8</lvname> <color>#dbd200</color> <volid>1100</volid> <index>0</index> <size>1859.88115311</size> </partition> </partitions> </disk> <disk> <size>1859.88115311</size> <internal>true</internal> <name>Disk-E</name> <system>false</system> <blockdev>/dev/sde</blockdev> <diskid>5YD0X50V</diskid> <model>ST2000DL001-9VT156</model> <usb>false</usb> <freesize>0</freesize> <init>true</init> <partitions> <partition> <lvname>/dev/sde8</lvname> <color>#63eb1d</color> <volid>1100</volid> <index>0</index> <size>1859.88115311</size> </partition> </partitions> </disk> </disks> <vols/> <isofiles/> <rsyncd> <enable>false</enable> </rsyncd> </nas_conf_db>

by **Jocko** » Tue May 28, 2024 10:07 am

:shocked
so we're back to square one... Why the firmware failed to assemble the raid on nas booting ? :pound

I assume you will succeed if you do again

Code: Select all: mdadm --assemble /dev/md0 --run echo $? cat /proc/mdstat dmesg

Please to note you have some errors in boot.log, just because now sda8 is now a raid member and the firmware removed its related volume but do not create the one for raid5 as it is not available.

razzor0 wrote:I was wondering if its help if I will do reinstall once more only with one drive as before.

I do not think it will change the issue but you can try to update the firmware (which will duplicate it on another system partition <=> to do a new first install)

Later we will try to use an old kernel version

by **razzor0** » Tue May 28, 2024 10:56 am

Hi Jocko here are outputs :(

Code: Select all: root@fvdwsl-base:/ # mdadm --assemble /dev/md0 --run mdadm: failed to get exclusive lock on mapfile - continue anyway... mdadm: /dev/md0 has been started with 5 drives. _____________________________________________________________________________ root@fvdwsl-base:/ # echo $? 0 _____________________________________________________________________________ root@fvdwsl-base:/ # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md0 : active raid5 sda8[5] sde8[4] sdd8[3] sdc8[2] sdb8[1] 7800905728 blocks super 1.0 level 5, 512k chunk, algorithm 2 [5/5] [UUUUU] unused devices: <none> _____________________________________________________________________________ root@fvdwsl-base:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.133 (root@fvdwsl-5big2.local) (gcc version 4.9 .3 (GCC)) #5 PREEMPT Thu Aug 10 15:38:37 CEST 2023 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005317 f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: LaCie 5Big Network v2 [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c0929960, node_mem_map dfbfa00 0 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro reset =0 productType=BIG5_KW [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 509948K/524288K available (6915K kernel code, 307K rwdata , 1724K rodata, 192K init, 388K bss, 14340K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc06c8f94 (6916 kB) [ 0.000000] .init : 0xc08ae000 - 0xc08de000 ( 192 kB) [ 0.000000] .data : 0xc08de000 - 0xc092ada0 ( 308 kB) [ 0.000000] .bss : 0xc0932720 - 0xc099393c ( 389 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 114 [ 0.000000] Switching to timer-based delay loop, resolution 6ns [ 0.000009] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884 901885ns [ 6.355966] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xff ffffff, max_idle_ns: 11467562657 ns [ 6.356253] Console: colour dummy device 80x30 [ 6.356288] Calibrating delay loop (skipped), value calculated using timer fr equency.. 333.33 BogoMIPS (lpj=1666666) [ 6.356310] pid_max: default: 32768 minimum: 301 [ 6.356461] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 6.356485] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 6.357006] CPU: Testing write buffer coherency: ok [ 6.357794] Setting up static identity map for 0x81e0 - 0x8238 [ 6.357961] Hierarchical SRCU implementation. [ 6.359836] random: get_random_u32 called from bucket_table_alloc+0x14c/0x198 with crng_init=0 [ 6.360250] VFP support v0.3: not present [ 6.360507] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 6.360533] futex hash table entries: 256 (order: -1, 3072 bytes) [ 6.360635] xor: measuring software checksum speed [ 6.456360] arm4regs : 1088.400 MB/sec [ 6.556050] 8regs : 653.600 MB/sec [ 6.656043] 32regs : 904.400 MB/sec [ 6.656061] xor: using function: arm4regs (1088.400 MB/sec) [ 6.656078] pinctrl core: initialized pinctrl subsystem [ 6.656659] NET: Registered protocol family 16 [ 6.657141] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 6.659618] Kirkwood: MV88F6281-A0, TCLK=166666667. [ 6.659649] Feroceon L2: Enabling L2 [ 6.659688] Feroceon L2: Cache support initialised. [ 6.660431] kirkwood_init: create proc tsinfo proc [ 6.660454] tsinfo: create proc tsinfo vendor successfully [ 6.660463] mv_usb_init 1 [ 6.660473] mv_usb_init 2 devnum = 0 [ 6.660484] init function mv_usb_init finished [ 6.660492] initial MPP regs: [ 6.660497] 01112222 [ 6.660501] 00003311 [ 6.660508] 33331100 [ 6.660515] 33003333 [ 6.660521] 00000033 [ 6.660528] 00000000 [ 6.660534] 00000000 [ 6.660541] [ 6.660557] final MPP regs: [ 6.660561] 01112222 [ 6.660564] 00003311 [ 6.660571] 33331100 [ 6.660577] 33003333 [ 6.660584] 00000033 [ 6.660590] 00000000 [ 6.660596] 00000000 [ 6.660603] [ 6.660887] orion-ehci registered [ 6.663454] orion_gpio_is_valid: invalid GPIO 7 [ 6.664203] Kirkwood PCIe port 0: link down [ 6.664216] Kirkwood PCIe port 1: link up [ 6.664238] PCI: bus0 uses PCIe port 0 [ 6.664554] PCI host bridge to bus 0000:00 [ 6.664578] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff] [ 6.664591] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 6.664603] pci_bus 0000:00: No busn resource found for root bus, will use [b us 00-ff] [ 6.664639] pci 0000:00:00.0: [11ab:6281] type 00 class 0x058000 [ 6.664671] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref ] [ 6.664686] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x1fffffff] [ 6.664751] pci 0000:00:00.0: supports D1 D2 [ 6.665228] PCI: bus0: Fast back to back transfers disabled [ 6.665249] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 6.665256] PCI: bus1 uses PCIe port 1 [ 6.665568] PCI host bridge to bus 0000:01 [ 6.665587] pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff] [ 6.665601] pci_bus 0000:01: root bus resource [io 0x10000-0x1ffff] [ 6.665612] pci_bus 0000:01: No busn resource found for root bus, will use [b us 01-ff] [ 6.665644] PCI: bus1: Fast back to back transfers enabled [ 6.665658] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 6.867059] raid6: int32x1 gen() 101 MB/s [ 7.036415] raid6: int32x1 xor() 63 MB/s [ 7.206428] raid6: int32x2 gen() 133 MB/s [ 7.376194] raid6: int32x2 xor() 84 MB/s [ 7.546385] raid6: int32x4 gen() 133 MB/s [ 7.716247] raid6: int32x4 xor() 90 MB/s [ 7.886223] raid6: int32x8 gen() 121 MB/s [ 8.056099] raid6: int32x8 xor() 80 MB/s [ 8.056109] raid6: using algorithm int32x2 gen() 133 MB/s [ 8.056118] raid6: .... xor() 84 MB/s, rmw enabled [ 8.056125] raid6: using intx1 recovery algorithm [ 8.056392] vgaarb: loaded [ 8.056903] SCSI subsystem initialized [ 8.057206] libata version 3.00 loaded. [ 8.057709] usbcore: registered new interface driver usbfs [ 8.057825] usbcore: registered new interface driver hub [ 8.057948] usbcore: registered new device driver usb [ 8.058205] Linux video capture interface: v2.00 [ 8.060321] clocksource: Switched to clocksource orion_clocksource [ 8.060443] VFS: Disk quotas dquot_6.6.0 [ 8.060501] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.075062] NET: Registered protocol family 2 [ 8.076329] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 8.076391] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 8.076443] TCP: Hash tables configured (established 4096 bind 4096) [ 8.076522] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 8.076546] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 8.076698] NET: Registered protocol family 1 [ 8.077023] RPC: Registered named UNIX socket transport module. [ 8.077035] RPC: Registered udp transport module. [ 8.077044] RPC: Registered tcp transport module. [ 8.077052] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.077076] PCI: CLS 32 bytes, default 32 [ 8.077302] NetWinder Floating Point Emulator V0.97 (double precision) [ 8.077427] gpio-usb-probe-1 [ 8.077484] gpio-usb-probe-4b err=0 [ 8.077499] gpio-usb gpio-usb: USB GPIO's initialized [ 8.079111] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 8.079733] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 8.080110] ntfs: driver 2.1.32 [Flags: R/W]. [ 8.080150] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 8.080294] fuse init (API version 7.26) [ 8.080587] JFS: nTxBlock = 3983, nTxLock = 31871 [ 8.082121] SGI XFS with ACLs, security attributes, realtime, no debug enable d [ 8.087646] async_tx: api initialized (async) [ 8.087721] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 51) [ 8.087733] io scheduler noop registered [ 8.087742] io scheduler deadline registered [ 8.087795] io scheduler cfq registered (default) [ 8.087806] io scheduler mq-deadline registered [ 8.088055] mv_xor mv_xor.0: Marvell shared XOR driver [ 8.146706] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy ) [ 8.148764] mv_xor mv_xor.1: Marvell shared XOR driver [ 8.206697] mv_xor mv_xor.1: Marvell XOR (Registers Mode): ( xor cpy ) [ 8.213394] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 8.215426] console [ttyS0] disabled [ 8.235828] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 104 16666) is a 16550A [ 8.927056] random: fast init done [ 8.967107] console [ttyS0] enabled [ 8.983107] brd: module loaded [ 8.992840] loop: module loaded [ 8.997152] sata_mv sata_mv.0: version 1.28 [ 8.997210] sata_mv sata_mv.0: cannot get optional clkdev [ 9.002684] sata_mv sata_mv.0: slots 32 ports 2 [ 9.010912] scsi host0: sata_mv [ 9.014605] scsi host1: sata_mv [ 9.018130] ata1: SATA max UDMA/133 irq 21 [ 9.022211] ata2: SATA max UDMA/133 irq 21 [ 9.027705] m25p80 spi0.0: mx25l4005a (512 Kbytes) [ 9.033544] Creating 2 MTD partitions on "spi_flash": [ 9.038647] 0x000000000000-0x00000007d000 : "u-boot" [ 9.044478] 0x00000007e000-0x00000007f000 : "u-boot-env" [ 9.052386] tun: Universal TUN/TAP device driver, 1.6 [ 9.058685] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn .edu> [ 9.066906] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393 @maroon.tc.umn.edu> [ 9.083499] libphy: orion_mdio_bus: probed [ 9.087877] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 9.536083] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 9.556198] ata1.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0 x5/0x1f [ 9.579338] ata1.00: hard resetting link [ 9.907470] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:8f:c2:05 [ 9.916990] ata1.01: hard resetting link [ 10.426297] ata1.02: hard resetting link [ 10.717487] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:d0:4b:8f:15:8f [ 10.726563] PPP generic driver version 2.4.2 [ 10.731165] PPP Deflate Compression module registered [ 10.736414] PPP MPPE Compression module registered [ 10.741181] NET: Registered protocol family 24 [ 10.745623] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet dri ver [ 10.753248] usbcore: registered new interface driver pegasus [ 10.759254] usbcore: registered new interface driver asix [ 10.764822] usbcore: registered new interface driver ax88179_178a [ 10.771133] usbcore: registered new interface driver cdc_ether [ 10.777649] usbcore: registered new interface driver net1080 [ 10.783474] usbcore: registered new interface driver plusb [ 10.789110] usbcore: registered new interface driver cdc_subset [ 10.795195] usbcore: registered new interface driver zaurus [ 10.800927] usbcore: registered new interface driver ipheth [ 10.806707] usbcore: registered new interface driver cdc_ncm [ 10.813097] aoe: cannot create debugfs directory [ 10.818127] aoe: AoE v85 initialised. [ 10.822204] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 [ 10.828431] i2c /dev entries driver [ 10.833403] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write [ 10.840602] uvcvideo: Unable to create debugfs directory [ 10.846370] usbcore: registered new interface driver uvcvideo [ 10.852090] USB Video Class driver (1.1.1) [ 10.856217] gspca_main: v2.14.0 registered [ 10.860417] usbcore: registered new interface driver Philips webcam [ 10.877508] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-d evel@redhat.com [ 10.886633] device-mapper: multipath round-robin: version 1.2.0 loaded [ 10.893132] device-mapper: multipath queue-length: version 0.2.0 loaded [ 10.899769] device-mapper: multipath service-time: version 0.3.0 loaded [ 10.906438] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 10.912504] device-mapper: raid: Loading target version 1.13.0 [ 10.921008] Netfilter messages via NETLINK v0.30. [ 10.925705] nfnl_acct: registering with nfnetlink. [ 10.931763] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) [ 10.938356] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 10.944538] ip_tables: (C) 2000-2006 Netfilter Core Team [ 10.950196] ata1.03: hard resetting link [ 10.955233] NET: Registered protocol family 10 [ 10.961151] Segment Routing with IPv6 [ 10.964887] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.970632] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 10.977401] NET: Registered protocol family 17 [ 10.981880] Bridge firewalling registered [ 10.986267] NET: Registered protocol family 5 [ 10.991582] console [netcon0] enabled [ 10.995231] netconsole: network logging started [ 11.000309] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 11.007472] rtc-mv rtc-mv: setting system clock to 2024-05-28 10:52:08 UTC (1 716893528) [ 11.476064] ata1.01: ATA-8: ST2000DL001-9VT156, CC41, max UDMA/133 [ 11.482220] ata1.01: 3907029168 sectors, multi 0: LBA48 [ 11.516071] ata1.01: configured for UDMA/133 [ 11.536127] ata1.02: ATA-8: ST2000DL001-9VT156, CC41, max UDMA/133 [ 11.542285] ata1.02: 3907029168 sectors, multi 0: LBA48 [ 11.576069] ata1.02: configured for UDMA/133 [ 11.596061] ata1.03: ATA-10: ST2000VN003-3CW102, SC60, max UDMA/133 [ 11.602307] ata1.03: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 11.636070] ata1.03: configured for UDMA/133 [ 11.640508] ata1: EH complete [ 11.656318] scsi 0:1:0:0: Direct-Access ATA ST2000DL001-9VT1 CC41 PQ : 0 ANSI: 5 [ 11.664907] fvdw1 disk index before get_sd_name = 0 [ 11.669912] device-name= sata_mv [ 11.673126] fvdw2 disk index after get_sd_name = 2 [ 11.677932] fvdw3 prefix[0]=s prefix[1]=d [ 11.682006] fvdw4 diskname = sdc [ 11.685700] sd 0:1:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1. 82 TiB) [ 11.693956] scsi 0:2:0:0: Direct-Access ATA ST2000DL001-9VT1 CC41 PQ : 0 ANSI: 5 [ 11.702433] sd 0:1:0:0: [sdc] 4096-byte physical blocks [ 11.708195] fvdw1 disk index before get_sd_name = 1 [ 11.713050] device-name= sata_mv [ 11.716487] sd 0:1:0:0: [sdc] Write Protect is off [ 11.721265] sd 0:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 11.721375] sd 0:1:0:0: [sdc] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 11.730461] fvdw2 disk index after get_sd_name = 1 [ 11.735229] fvdw3 prefix[0]=s prefix[1]=d [ 11.740429] fvdw4 diskname = sdb [ 11.744235] sd 0:2:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1. 82 TiB) [ 11.752682] scsi 0:3:0:0: Direct-Access ATA ST2000VN003-3CW1 SC60 PQ : 0 ANSI: 5 [ 11.761194] sd 0:2:0:0: [sdb] 4096-byte physical blocks [ 11.766996] fvdw1 disk index before get_sd_name = 2 [ 11.771855] device-name= sata_mv [ 11.775361] sd 0:2:0:0: [sdb] Write Protect is off [ 11.780243] sd 0:2:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 11.780389] sd 0:2:0:0: [sdb] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 11.789570] fvdw2 disk index after get_sd_name = 0 [ 11.794404] sdc: sdc4 < sdc5 sdc6 sdc7 sdc8 > [ 11.798880] fvdw3 prefix[0]=s prefix[1]=d [ 11.804773] sd 0:1:0:0: [sdc] Attached SCSI disk [ 11.810823] fvdw4 diskname = sda [ 11.814887] sd 0:3:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1. 82 TiB) [ 11.823154] sd 0:3:0:0: [sda] 4096-byte physical blocks [ 11.828612] sd 0:3:0:0: [sda] Write Protect is off [ 11.833387] sd 0:3:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.833495] sd 0:3:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 11.870452] sdb: sdb4 < sdb5 sdb6 sdb7 sdb8 > [ 11.877346] sd 0:2:0:0: [sdb] Attached SCSI disk [ 11.906513] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 11.914112] sd 0:3:0:0: [sda] Attached SCSI disk [ 12.326029] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 12.332990] ata2.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0 x5/0x1f [ 12.348062] ata2.00: hard resetting link [ 12.686800] ata2.01: hard resetting link [ 13.196289] ata2.02: hard resetting link [ 13.706300] ata2.03: hard resetting link [ 14.066062] ata2.01: ATA-8: ST2000DL001-9VT156, CC41, max UDMA/133 [ 14.072215] ata2.01: 3907029168 sectors, multi 0: LBA48 [ 14.106070] ata2.01: configured for UDMA/133 [ 14.126059] ata2.02: ATA-8: ST2000DL001-9VT156, CC41, max UDMA/133 [ 14.132211] ata2.02: 3907029168 sectors, multi 0: LBA48 [ 14.166069] ata2.02: configured for UDMA/133 [ 14.170509] ata2: EH complete [ 14.186321] scsi 1:1:0:0: Direct-Access ATA ST2000DL001-9VT1 CC41 PQ : 0 ANSI: 5 [ 14.194901] fvdw1 disk index before get_sd_name = 3 [ 14.199906] device-name= sata_mv [ 14.203126] fvdw2 disk index after get_sd_name = 4 [ 14.207934] fvdw3 prefix[0]=s prefix[1]=d [ 14.212015] fvdw4 diskname = sde [ 14.215716] sd 1:1:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1. 82 TiB) [ 14.224075] scsi 1:2:0:0: Direct-Access ATA ST2000DL001-9VT1 CC41 PQ : 0 ANSI: 5 [ 14.232450] sd 1:1:0:0: [sde] 4096-byte physical blocks [ 14.238205] fvdw1 disk index before get_sd_name = 4 [ 14.243058] device-name= sata_mv [ 14.246495] sd 1:1:0:0: [sde] Write Protect is off [ 14.251273] sd 1:1:0:0: [sde] Mode Sense: 00 3a 00 00 [ 14.251382] sd 1:1:0:0: [sde] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 14.260480] fvdw2 disk index after get_sd_name = 3 [ 14.265245] fvdw3 prefix[0]=s prefix[1]=d [ 14.270460] fvdw4 diskname = sdd [ 14.274279] sd 1:2:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1. 82 TiB) [ 14.282752] sd 1:2:0:0: [sdd] 4096-byte physical blocks [ 14.288070] sd 1:2:0:0: [sdd] Write Protect is off [ 14.292847] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 14.292956] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 14.339413] sde: sde4 < sde5 sde6 sde7 sde8 > [ 14.345748] sd 1:1:0:0: [sde] Attached SCSI disk [ 14.359535] sdd: sdd4 < sdd5 sdd6 sdd7 sdd8 > [ 14.365760] sd 1:2:0:0: [sdd] Attached SCSI disk [ 14.370830] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 14.411583] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsyste m [ 14.424864] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 14.432629] VFS: Mounted root (ext3 filesystem) readonly on device 8:39. [ 14.439888] Freeing unused kernel memory: 192K [ 14.444310] This architecture does not have kernel memory protection. [ 14.846176] EXT4-fs (sda7): re-mounted. Opts: (null) [ 15.258450] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsyste m [ 15.516247] EXT4-fs (sda1): recovery complete [ 15.546102] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 15.924909] EXT4-fs (sda1): re-mounted. Opts: (null) [ 17.287726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 17.294783] ehci-orion: EHCI orion driver [ 17.298995] orion-ehci orion-ehci.0: EHCI Host Controller [ 17.304421] orion-ehci orion-ehci.0: new USB bus registered, assigned bus num ber 1 [ 17.312182] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 17.346041] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 17.352086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 17.358864] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 17.366060] usb usb1: Product: EHCI Host Controller [ 17.370914] usb usb1: Manufacturer: Linux 4.14.133 ehci_hcd [ 17.376473] usb usb1: SerialNumber: orion-ehci.0 [ 17.381439] hub 1-0:1.0: USB hub found [ 17.385207] hub 1-0:1.0: 1 port detected [ 17.407660] usbcore: registered new interface driver usb-storage [ 17.428785] usbcore: registered new interface driver usblp [ 17.469265] Loading iSCSI transport class v2.0-870. [ 17.478725] iscsi: registered transport (tcp) [ 17.690191] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsyste m [ 17.756040] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 17.906254] EXT4-fs (sda5): recovery complete [ 17.916137] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 17.966586] usb 1-1: New USB device found, idVendor=0424, idProduct=2512 [ 17.973263] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 17.996593] hub 1-1:1.0: USB hub found [ 18.003341] hub 1-1:1.0: 2 ports detected [ 18.040458] random: mkswap: uninitialized urandom read (16 bytes read) [ 18.063719] Adding 524284k swap on /dev/sda3. Priority:-2 extents:1 across:5 24284k [ 18.158765] random: dropbear: uninitialized urandom read (32 bytes read) [ 18.759161] random: crng init done [ 29.865928] udevd (1120): /proc/1120/oom_adj is deprecated, please use /proc/ 1120/oom_score_adj instead. [ 29.875589] udev: starting version 130 [ 30.371190] synth uevent: /gpiochip0: failed to send uevent [ 30.371207] gpio gpiochip0: uevent: failed to send synthetic uevent [ 30.446242] synth uevent: /gpiochip1: failed to send uevent [ 30.446259] gpio gpiochip1: uevent: failed to send synthetic uevent [ 51.216676] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 51.222785] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 54.409060] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, ful l duplex, flow control disabled [ 54.418905] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 125.495133] md: md0 stopped. [ 125.545134] md/raid:md0: device sda8 operational as raid disk 0 [ 125.551149] md/raid:md0: device sde8 operational as raid disk 4 [ 125.557081] md/raid:md0: device sdd8 operational as raid disk 3 [ 125.562972] md/raid:md0: device sdc8 operational as raid disk 2 [ 125.568938] md/raid:md0: device sdb8 operational as raid disk 1 [ 125.576813] md/raid:md0: raid level 5 active with 5 out of 5 devices, algorit hm 2 [ 125.591158] md0: detected capacity change from 0 to 7988127465472 root@fvdwsl-base:/ #

by **fvdw** » Tue May 28, 2024 12:29 pm

this looks promising, no errors in dmesg and raid is assembled and active, wait for further comment of Jocko

by **Jocko** » Tue May 28, 2024 12:40 pm

fvdw wrote:this looks promising, no errors in dmesg and raid is assembled and active, wait for further comment of Jocko

This is why it is amazing because on nas booting the raid should be also restored... (same command) :scratch

So I sent you a pm with some edited files. On nas booting, the firmware will try 5 times to restore the raid. if it fails, the firmware will wait 10'' before the new attempt.

Then set your plugout account as detailed in https://plugout.net/viewtopic.php?f=7&t=3224. Open a shell window, and to install them do

Code: Select all: plugout download 7295 tar -xf /tmp/check_restore_raid.tgz -C /

Reboot the nas and open again a shell window, and do

Code: Select all: cat /boot.log cat /tmp/restore_raid.log

by **razzor0** » Tue May 28, 2024 12:56 pm

Code: Select all: root@fvdwsl-base:/ # cat /boot.log start boot log is a physical machine detect and set platform 5big2 kirkwood UIMAGE-414133-KIRKWOOD-5 Current kernel: 4.14.133 #5 PREEMPT Thu Aug 10 15:38:37 CEST 2023 device 5big2 family kirkwood Arm: found valid system disk sda system disk = sda mount dev/pts update dev nodes booting using sda1 root file system... enable IP forwarding... run udevstart to update dev nodes when necessary inserting kernel modules: modprobe: module 'iscsi_trgt' not found start buttons control daemon device = 5big2 source = buttons-nwsp2 buttons-nwsp2 daemon started Tue May 28 12:52:38 UTC 2024 configuration partition is rightly mounted create temporary passwd file create temporary group file set samba environment for version 3.0.37 configure loopback network interface setting reboot and standby 5big2 rebootd-nwsp2 5big2 standbyd-nwsp2 start fan starting php based setup routines step 1 * Initialize the volatile db file... [ OK ] * Starting udevd... [ OK ] * Starting RAID monitor: [ OK ] * Starting restore RAID devices... - Assembling device /dev/md0: [ Fail ] * Finishing restore RAID devices... [ Fail ] * Found database configuration file... [ OK ] * Updating Disks database... Warning: Illegal string offset 'vol' in /etc/finc/dm_update_single_db.finc on li ne 252 Warning: Invalid argument supplied for foreach() in /etc/finc/dm_update_single_d b.finc on line 252 [ OK ] * Starting mount of volumes... * Finishing mount of volumes... [ OK ] * Generating Hosts File... [ OK ] * Configuring System Hostname... [ OK ] * Configuring LAN interface... [ OK ] * Initializing Timezone... [ OK ] * Starting web server... [ OK ] * Starting mount of internal USB ... Warning: Illegal string offset 'vol' in /etc/finc/dm_mount_internal_USB.finc on line 21 * Finishing mount internal USB ... [ OK ] * Configuring Disks... [ OK ] * Configuring Samba... [ OK ] * Configuring System Users... Root password: use default password Set users, linux and samba accounts [ OK ] * Starting Fvdw-sl Discovery Daemon... [ OK ] start rpcbind service starting php based setup routines step 2 * Starting dropbear... [ OK ] * Kill temporary dropbear... [ OK ] starting php based setup routines step 3 * Starting daemon update Hosts File... [ OK ] * Starting mount of remote shares... * Finishing mount shares... [ OK ] * Starting NTP client... [ OK ] Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 31 Warning: Illegal string offset 'vol' in /etc/finc/dm_get_volume_addons.finc on l ine 32 Warning: Illegal string offset 'volid' in /etc/finc/dm_get_volume_addons.finc on line 32 starting php based setup routines step banner *** fvdw-sl NAS firmware This is fvdw-sl version: fvdw-sl 18.3 built on: February 20 2024 LAN IP address: 192.168.188.46 (DHCP) Port configuration: LAN -> eth0 php based setup routines finished web permission on resolv.conf set device tuning for dms performance move smbd en nmbd db files away from ram disk to prevent hanging samba server ------------------------ Monitor if file system check is required on next booting LED settings Send a boot mail notification to else loop1 finished rcS finished _________________________________________________________________ root@fvdwsl-base:/ # cat /tmp/restore_raid.log attempt n° 1 stderr value 2 Failed to assemble the raid device /dev/md0 attempt n° 2 stderr value 2 Failed to assemble the raid device /dev/md0 attempt n° 3 stderr value 2 Failed to assemble the raid device /dev/md0 attempt n° 4 stderr value 2 Failed to assemble the raid device /dev/md0 attempt n° 5 stderr value 2 Failed to assemble the raid device /dev/md0 Failed to assemble the raid device /dev/md0 after 5 attempts root@fvdwsl-base:/ #

by **Jocko** » Tue May 28, 2024 1:03 pm

So now we have mdadm error code : 2. Need to search what is it the meaning

But we should get more information with the debug mode. Do

Code: Select all: debugon

, reboot and post

Code: Select all: cat /tmp/restore_raid.log

by **razzor0** » Tue May 28, 2024 1:08 pm

So, its after debugon and after that i have rebooted nas and here is output :(

Code: Select all: root@fvdwsl-base:/ # cat /tmp/restore_raid.log attempt n° 1 stderr value 2 Failed to assemble the raid device /dev/md0 attempt n° 2 stderr value 2 Failed to assemble the raid device /dev/md0 attempt n° 3 stderr value 2 Failed to assemble the raid device /dev/md0 attempt n° 4 stderr value 2 Failed to assemble the raid device /dev/md0 attempt n° 5 stderr value 2 Failed to assemble the raid device /dev/md0 Failed to assemble the raid device /dev/md0 after 5 attempts

plugout.net

Raid clean, degraded completed, estimated time ...

Re: Raid clean, degraded completed, estimated time ...

Re: Raid clean, degraded completed, estimated time ...

Re: Raid clean, degraded completed, estimated time ...

Re: Raid clean, degraded completed, estimated time ...

Re: Raid clean, degraded completed, estimated time ...

Re: Raid clean, degraded completed, estimated time ...

Re: Raid clean, degraded completed, estimated time ...

Re: Raid clean, degraded completed, estimated time ...

Re: Raid clean, degraded completed, estimated time ...

Re: Raid clean, degraded completed, estimated time ...

Who is online