Problem creating raid1

[hirkkak]

I keep begging for help,
I replaced the other two caps without fixing the error.
What other HW component could be related?

On the other hand, these disks come from a disks cabin. Maybe the problem is related to that?
The HPA configuration appears invalid on all disks.

Code: Select all

root@fvdwsl-base:/ # hdparm -N /dev/sda
/dev/sda:
 max sectors   = 18446744073642184704/268435455(18446744073181638401?), HPA setting seems invalid

root@fvdwsl-base:/ # hdparm -N /dev/sdb
/dev/sdb:
 max sectors   = 18446744073642184704/268435455, HPA setting seems invalid

How can i reset the units to initial state?

PS. Also tried to format with GPT and boot via tftp, without any improvement.

[fvdw]

Maybe this link can help you.
https://superuser.com/questions/1823105/are-spare-sectors-stored-in-a-hard-drives-host-protected-area-hpa

[hirkkak]

Thanks, but already tried, and no helped.

My new investigation lane is on the kernel, how can i pass params , preferably without reboot.
Like libata.force=noncq or similar.
Or maybe disable raids and change to ahci for trying.

Pd. GJ. Donation made.

[fvdw]

Thank you for your donation, much appreciated.

We added you to the donators group and granted access to addons


About kernel parameters, some can be changed via items in folder /proc
But in my opinion your problem is not kernel related as other users do not have problem like you. Must be a mainboard issue or disk problem.