i connected the new power supply and booting the nas normally the assistant for now recognize the nas on 192.168.1.13....i can't go in web interface but hd looks working lot for now.....led blinks but not fixed.
I tried Putty
This is result:
login as: root
root@192.168.1.13's password:
root@NetworkSpace2:/ # cat boot.log
start boot log
is a physical machine
detect and set platform
nwsp2
kirkwood
UIMAGE-414133-KIRKWOOD-1
Current kernel: 4.14.133 #1 PREEMPT Wed Jul 17 14:46:56 CEST 2019
nwsp2
kirkwood
mount dev/pts
update dev nodes
booting using root file system...
enable IP forwarding...
run udevstart to update dev nodes when necessary
inserting kernel modules:
modprobe: module 'iscsi_trgt' not found
start buttons control daemon
device = nwsp2
source = buttons-nwsp2
buttons-nwsp2 daemon started
Fri Sep 23 22:45:49 CEST 2022
create temporary passwd file
create temporary group file
set samba environment for version 3.0.37
configure loopback network interface
setting reboot and standby
nwsp2
rebootd-nwsp2
nwsp2
standbyd-nwsp2
starting php based setup routines step 1
* Initialize the volatile db file... [ OK ]
* Starting udevd... [ OK ]
* Finishing restore RAID devices... [ OK ]
* Found database configuration file... [ OK ]
* Updating Disks database... [ OK ]
* Starting mount of volumes...
- Mounting volume Vol-A: [ OK ]
* Finishing mount of volumes... [ OK ]
* Generating Hosts File... [ OK ]
* Configuring System Hostname... [ OK ]
* Configuring LAN interface... [ OK ]
* Initializing Timezone... [ OK ]
* Starting web server... [ OK ]
* Starting mount of internal USB ...
* Finishing mount internal USB ... [ OK ]
* Configuring Disks... [ OK ]
* Configuring Samba... [ OK ]
* Configuring System Users...
Root password: use default password
Set users, linux and samba accounts [ OK ]
* Starting DDNS Service... [ OK ]
* Starting Fvdw-sl Discovery Daemon... [ OK ]
start rpcbind service
starting php based setup routines step 2
* Starting dropbear... [ OK ]
* Kill temporary dropbear... [ OK ]
starting php based setup routines step 3
* Starting NFS Server... [ OK ]
* Starting daemon update Hosts File... [ OK ]
* Starting NTP Server ... [ OK ]
* Starting mount of remote shares...
* Finishing mount shares... [ OK ]
* Starting FTP Service... [ OK ]
* Starting NTP client... [ OK ]
* Starting Minidlna Server... [ FAIL ]
* Starting Twonky Server... [ OK ]
starting php based setup routines step banner
*** fvdw-sl NAS firmware
This is fvdw-sl version: fvdw-sl 18.1
built on: July 29 2019
LAN IP address: 192.168.1.13 (DHCP)
Port configuration:
LAN -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
move smbd en nmbd db files away from ram disk to prevent hanging samba server
LED settings
else loop1 finished
rcS finished
root@NetworkSpace2:/ # login as: root
mount dev/pts
update dev nodes
booting using root file system...
enable IP forwarding...
run udevstart to update dev nodes when necessary
inserting kernel modules:
modprobe: module 'iscsi_trgt' not found
start buttons control daemon
device = nwsp2
source = buttons-nwsp2
buttons-nwsp2 daemon started
Fri Sep 23 22:45:49 CEST 2022
create temporary passwd file
create temporary group file
set samba environment for version 3.0.37
configure loopback network interface
setting reboot and standby
nwsp2
rebootd-nwsp2
nwsp2
standbyd-nwsp2
starting php based setup routines step 1
* Initialize the volatile db file... [ OK ]
* Starting udevd... [ OK ]
* Finishing restore RAID devices... [ OK ]
* Found database configuration file... [ OK ]
* Updating Disks database... [ OK ]
* Starting mount of volumes...
- Mounting volume Vol-A: [ OK ]
* Finishing mount of volumes... [ OK ]
* Generating Hosts File... [ OK ]
* Configuring System Hostname... [ OK ]
* Configuring LAN interface... [ OK ]
* Initializing Timezone... [ OK ]
* Starting web server... [ OK ]
* Starting mount of internal USB ...
* Finishing mount internal USB ... [ OK ]
* Configuring Disks... [ OK ]
* Configuring Samba... [ OK ]
* Configuring System Users...
Root password: use default password
Set users, linux and samba accounts [ OK ]
* Starting DDNS Service... [ OK ]
* Starting Fvdw-sl Discovery Daemon... [ OK ]
start rpcbind service
starting php based setup routines step 2
* Starting dropbear... [ OK ]
* Kill temporary dropbear... [ OK ]
starting php based setup routines step 3
* Starting NFS Server... [ OK ]
* Starting daemon update Hosts File... [ OK ]
* Starting NTP Server ... [ OK ]
* Starting mount of remote shares...
* Finishing mount shares... [ OK ]
* Starting FTP Service... [ OK ]
* Starting NTP client... [ OK ]
* Starting Minidlna Server... [ FAIL ]
* Starting Twonky Server... [ OK ]
starting php based setup routines step banner
*** fvdw-sl NAS firmware
This is fvdw-sl version: fvdw-sl 18.1
built on: July 29 2019
LAN IP address: 192.168.1.13 (DHCP)
Port configuration:
LAN -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
move smbd en nmbd db files away from ram disk to prevent hanging samba server
LED settings
else loop1 finished
rcS finished
Hope to receive feedback from u soon.