FORBIDDEN - You don't have permission to access on this serv

[Jocko]

[ 326.679272] EXT4-fs (sda5): error count since last fsck: 90
[ 326.684826] EXT4-fs (sda5): initial error at time 1514808332: ext4_mb_generate_buddy:758
[ 326.692897] EXT4-fs (sda5): last error at time 1514804400: ext4_mb_generate_buddy:757

Maybe this would explain the amazing behaviour of your nas.
So the fs is corrupted on sda5 and I assume that at some point the firmware fails to read/write on this partition. As some required files for apache, dropbear, proftpd and samba are stored on this location when they are running, you get the amazing behaviour as soon as I/O access is not possible on sda5.

Then try to repair the fs on sda5.
This time use fvdw-sl console and run

Code: Select all

dmesg -s
e2fsck -y /dev/sda5
mkdir /sda5
mount /dev/sda5 /sda5
dmesg

reboot the nas and see if the bad behaviour happens again

[Draftmancorp]

my problem is that .... fvdw console wont open a telnet connection... i get that error "192.168.1.24/telnet refused"

[Jocko]

Did you reboot the nas, there is no telnet server with fvdw-sl firmware but only when you use fvdw-sl console which loads a tiny OS on the RAM

[Draftmancorp]

wait, sorry, if i reboot the nas it boot up normally... are you talking about uboot console?

[Jocko]

Stop the nas, open fvdw-sl console and select the action "Standalone kernel, load and start" (which will load the tiny OS)
Then select the kirkwood standalone kernel "UIMAGE-3142-KIRKWOOD-171-standalone" and start the nas when the uboot console is waiting

[Draftmancorp]

:mrgreen: ahhhhhh ok...
wait a second, i have to close this mess first... i'm stuck inside Marvell >> window... exit command wont work, how can i reboot the nas inside this windows? :doh


EDIT: OK I FIND IT. now i do the rest, wait minute

[Draftmancorp]

wow... jocko, it wont connet in this way too...
it load the image, i see that, then i see the progress then appear and then after many seconds the black telnet window, and then telnet refused.

EDIT: OK IM'IN. SORRY. I DON'T KNOW WHAT HAPPENED.

[Draftmancorp]

Code: Select all

root@fvdw-sta-kirkwood:/ # dmesg -s
dmesg: option requires an argument -- s
BusyBox v1.21.0 (2013-02-04 10:48:06 GMT+1) multi-call binary.

Usage: dmesg [-c] [-n LEVEL] [-s SIZE]

Print or control the kernel ring buffer

        -c              Clear ring buffer after printing
        -n LEVEL        Set console logging level
        -s SIZE         Buffer size

root@fvdw-sta-kirkwood:/ # e2fsck -y /dev/sda5
-sh: e2fsck: not found
root@fvdw-sta-kirkwood:/ # mkdir /sda5
root@fvdw-sta-kirkwood:/ # mount /dev/sda5 /sda5
root@fvdw-sta-kirkwood:/ # dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.2 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #171 PREEMPT Wed Jan 17 23:33:31 CET 2018
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: LaCie 5Big Network v2
[    0.000000] Ignoring unrecognised tag 0x41000403
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c0982898, node_mem_map dfbfb000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.1.252/,6666@192.168.1.208/
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 509780K/524288K available (5950K kernel code, 220K rwdata, 1596K rodata, 1933K init, 233K bss, 14508K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0766b44   (7547 kB)
[    0.000000]       .init : 0xc0767000 - 0xc094a4cc   (1934 kB)
[    0.000000]       .data : 0xc094c000 - 0xc0983100   ( 221 kB)
[    0.000000]        .bss : 0xc098310c - 0xc09bd56c   ( 234 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:114
[    0.000011] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
[   17.713228] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[   17.803199] pid_max: default: 32768 minimum: 301
[   17.803336] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[   17.803355] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[   17.803900] CPU: Testing write buffer coherency: ok
[   17.804209] Setting up static identity map for 0x5a6ac0 - 0x5a6b18
[   17.806805] VFP support v0.3: not present
[   17.807328] xor: measuring software checksum speed
[   17.903232]    arm4regs  :  1089.200 MB/sec
[   18.003192]    8regs     :   654.400 MB/sec
[   18.103183]    32regs    :   905.600 MB/sec
[   18.103200] xor: using function: arm4regs (1089.200 MB/sec)
[   18.103218] pinctrl core: initialized pinctrl subsystem
[   18.103333] NET: Registered protocol family 16
[   18.103691] DMA: preallocated 256 KiB pool for atomic coherent allocations
[   18.106401] Kirkwood: MV88F6281-A0, TCLK=166666667.
[   18.106426] Feroceon L2: Enabling L2
[   18.106464] Feroceon L2: Cache support initialised.
[   18.107554] mv_usb_init 1
[   18.107573] mv_usb_init 2 devnum = 0
[   18.107585] init function mv_usb_init finished
[   18.107593] initial MPP regs: 01112222 00003311 33331100 33003333 00000033 00000000 00000000
[   18.107625]   final MPP regs: 01112222 00003311 33331100 33003333 00000033 00000000 00000000
[   18.107809]  orion-ehci registered
[   18.109637] orion_gpio_is_valid: invalid GPIO 7
[   18.110121] Kirkwood PCIe port 0: link down
[   18.110131] Kirkwood PCIe port 1: link up
[   18.110140] PCI: bus0 uses PCIe port 0
[   18.110380] PCI host bridge to bus 0000:00
[   18.110401] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[   18.110415] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
[   18.110428] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[   18.110476] pci 0000:00:00.0: [11ab:6281] type 00 class 0x058000
[   18.110505] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref]
[   18.110522] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x1fffffff]
[   18.110573] pci 0000:00:00.0: supports D1 D2
[   18.110846] PCI: bus0: Fast back to back transfers disabled
[   18.110865] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[   18.110878] PCI: bus1 uses PCIe port 1
[   18.111100] PCI host bridge to bus 0000:01
[   18.111118] pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff]
[   18.111132] pci_bus 0000:01: root bus resource [io  0x10000-0x1ffff]
[   18.111144] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[   18.111182] PCI: bus1: Fast back to back transfers enabled
[   18.111197] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[   18.135356] bio: create slab <bio-0> at 0
[   18.304352] raid6: int32x1     95 MB/s
[   18.473346] raid6: int32x2    123 MB/s
[   18.643413] raid6: int32x4    120 MB/s
[   18.813281] raid6: int32x8    128 MB/s
[   18.813291] raid6: using algorithm int32x8 (128 MB/s)
[   18.813299] raid6: using intx1 recovery algorithm
[   18.814131] SCSI subsystem initialized
[   18.814590] libata version 3.00 loaded.
[   18.815476] usbcore: registered new interface driver usbfs
[   18.815650] usbcore: registered new interface driver hub
[   18.815845] usbcore: registered new device driver usb
[   18.818323] cfg80211: Calling CRDA to update world regulatory domain
[   18.818572] Switched to clocksource orion_clocksource
[   18.820840] NET: Registered protocol family 2
[   18.821304] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[   18.821363] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[   18.821415] TCP: Hash tables configured (established 4096 bind 4096)
[   18.821467] TCP: reno registered
[   18.821481] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   18.821503] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   18.821694] NET: Registered protocol family 1
[   18.821962] RPC: Registered named UNIX socket transport module.
[   18.821973] RPC: Registered udp transport module.
[   18.821980] RPC: Registered tcp transport module.
[   18.821987] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   18.822008] PCI: CLS 32 bytes, default 32
[   18.968558] NetWinder Floating Point Emulator V0.97 (double precision)
[   18.968682] gpio-usb-probe-4b err=0
[   18.968698] gpio-usb gpio-usb: USB GPIO's initialized
[   18.970296] futex hash table entries: 256 (order: -1, 3072 bytes)
[   19.071942] VFS: Disk quotas dquot_6.5.2
[   19.071992] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   19.072420] NFS: Registering the id_resolver key type
[   19.072475] Key type id_resolver registered
[   19.072485] Key type id_legacy registered
[   19.072503] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[   19.072516] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   19.072619] NTFS driver 2.1.30 [Flags: R/W].
[   19.072649] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[   19.072794] fuse init (API version 7.22)
[   19.073415] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   19.073830] msgmni has been set to 995
[   19.074948] async_tx: api initialized (async)
[   19.075134] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   19.075146] io scheduler noop registered
[   19.075155] io scheduler deadline registered
[   19.075175] io scheduler cfq registered (default)
[   19.075553] mv_xor mv_xor.0: Marvell shared XOR driver
[   19.113212] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[   19.153208] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[   19.153456] mv_xor mv_xor.1: Marvell shared XOR driver
[   19.193206] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[   19.233207] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[   19.239082] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   19.260197] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[   19.884780] console [ttyS0] enabled
[   19.897652] brd: module loaded
[   19.905345] loop: module loaded
[   19.908782] Uniform Multi-Platform E-IDE driver
[   19.913642] ide-gd driver 1.18
[   19.918193] sata_mv sata_mv.0: version 1.28
[   19.918256] sata_mv sata_mv.0: cannot get optional clkdev
[   19.924088] sata_mv sata_mv.0: slots 32 ports 2
[   19.931630] scsi0 : sata_mv
[   19.935149] scsi1 : sata_mv
[   19.938338] ata1: SATA max UDMA/133 irq 21
[   19.942417] ata2: SATA max UDMA/133 irq 21
[   19.949147] m25p80 spi0.0: mx25l4005a (512 Kbytes)
[   19.954184] Creating 2 MTD partitions on "spi_flash":
[   19.959216] 0x000000000000-0x00000007d000 : "u-boot"
[   19.965453] 0x00000007e000-0x00000007f000 : "u-boot-env"
[   19.973564] tun: Universal TUN/TAP device driver, 1.6
[   19.978590] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   19.985051] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   19.993294] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   20.009619] libphy: orion_mdio_bus: probed
[   20.013975] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   20.453179] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   20.473175] ata1.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f
[   20.534820] ata1.00: hard resetting link
[   20.883933] ata1.01: hard resetting link
[   21.127519] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:8d:9a:81
[   21.403434] ata1.02: hard resetting link
[   21.923431] ata1.03: hard resetting link
[   22.225956] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:d0:4b:8d:39:dd
[   22.234794] PPP generic driver version 2.4.2
[   22.239373] PPP Deflate Compression module registered
[   22.244574] PPP MPPE Compression module registered
[   22.249339] NET: Registered protocol family 24
[   22.253989] usbcore: registered new interface driver rtl8187
[   22.259621] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[   22.267333] usbcore: registered new interface driver pegasus
[   22.273201] usbcore: registered new interface driver asix
[   22.278719] usbcore: registered new interface driver ax88179_178a
[   22.285476] usbcore: registered new interface driver cdc_ether
[   22.291462] usbcore: registered new interface driver net1080
[   22.297303] usbcore: registered new interface driver cdc_subset
[   22.303414] usbcore: registered new interface driver zaurus
[   22.309170] usbcore: registered new interface driver ipheth
[   22.314915] usbcore: registered new interface driver cdc_ncm
[   22.321554] aoe: cannot create debugfs directory
[   22.326329] aoe: AoE v85 initialised.
[   22.503213] ata1.01: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[   22.509458] ata1.01: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   22.773216] ata1.01: configured for UDMA/133
[   22.833214] ata1.02: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[   22.839453] ata1.02: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   23.123304] ata1.02: configured for UDMA/133
[   23.163207] ata1.03: ATA-9: ST2000DM006-2DM164, CC26, max UDMA/133
[   23.169363] ata1.03: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   23.233217] ata1.03: configured for UDMA/133
[   23.237651] ata1: EH complete
[   23.253440] scsi 0:1:0:0: Direct-Access     ATA      ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[   23.262025] fvdw1 disk index before get_sd_name = 0
[   23.266928] device-name= sata_mv
[   23.270137] fvdw2 disk index after get_sd_name = 2
[   23.274935] fvdw3 prefix[0]=s  prefix[1]=d
[   23.279010] fvdw4 diskname = sdc
[   23.282703] sd 0:1:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   23.290789] sd 0:1:0:0: Attached scsi generic sg0 type 0
[   23.296165] sd 0:1:0:0: [sdc] 4096-byte physical blocks
[   23.301844] scsi 0:2:0:0: Direct-Access     ATA      ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[   23.310265] sd 0:1:0:0: [sdc] Write Protect is off
[   23.315063] sd 0:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[   23.315172] sd 0:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.324650] fvdw1 disk index before get_sd_name = 1
[   23.329501] device-name= sata_mv
[   23.332706] fvdw2 disk index after get_sd_name = 1
[   23.337510] rtc-mv rtc-mv: internal RTC not ticking
[   23.342646] i2c /dev entries driver
[   23.347738] fvdw3 prefix[0]=s  prefix[1]=d
[   23.351819] fvdw4 diskname = sdb
[   23.355573] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[   23.363235] sd 0:2:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   23.371499] sd 0:2:0:0: [sdb] 4096-byte physical blocks
[   23.376999] sd 0:2:0:0: Attached scsi generic sg1 type 0
[   23.383121] scsi 0:3:0:0: Direct-Access     ATA      ST2000DM006-2DM1 CC26 PQ: 0 ANSI: 5
[   23.391687] sd 0:2:0:0: [sdb] Write Protect is off
[   23.396646]  sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 >
[   23.404005] sd 0:2:0:0: [sdb] Mode Sense: 00 3a 00 00
[   23.404248] sd 0:2:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.414321] fvdw1 disk index before get_sd_name = 2
[   23.419182] device-name= sata_mv
[   23.423980] fvdw2 disk index after get_sd_name = 0
[   23.428749] fvdw3 prefix[0]=s  prefix[1]=d
[   23.432827] fvdw4 diskname = sda
[   23.437466] sd 0:1:0:0: [sdc] Attached SCSI disk
[   23.442714] sd 0:3:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   23.451064] sd 0:3:0:0: Attached scsi generic sg2 type 0
[   23.456424] sd 0:3:0:0: [sda] 4096-byte physical blocks
[   23.462364] sd 0:3:0:0: [sda] Write Protect is off
[   23.467258] sd 0:3:0:0: [sda] Mode Sense: 00 3a 00 00
[   23.467376] sd 0:3:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.484375]  sdb: sdb4 < sdb5 sdb6 sdb7 sdb8 >
[   23.490248] md: linear personality registered for level -1
[   23.496078] md: raid0 personality registered for level 0
[   23.502343] sd 0:2:0:0: [sdb] Attached SCSI disk
[   23.507024] md: raid1 personality registered for level 1
[   23.512400] md: raid10 personality registered for level 10
[   23.518124] md: raid6 personality registered for level 6
[   23.523553] md: raid5 personality registered for level 5
[   23.528876]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[   23.534630] md: raid4 personality registered for level 4
[   23.541180] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[   23.551577] sd 0:3:0:0: [sda] Attached SCSI disk
[   23.556223] device-mapper: multipath: version 1.6.0 loaded
[   23.561687] device-mapper: multipath round-robin: version 1.0.0 loaded
[   23.568252] device-mapper: multipath queue-length: version 0.1.0 loaded
[   23.574908] device-mapper: multipath service-time: version 0.2.0 loaded
[   23.581548] device-mapper: dm-log-userspace: version 1.3.0 loaded
[   23.587646] device-mapper: raid: Loading target version 1.5.2
[   23.597552] ipip: IPv4 over IPv4 tunneling driver
[   23.602968] TCP: cubic registered
[   23.606394] NET: Registered protocol family 10
[   23.611731] sit: IPv6 over IPv4 tunneling driver
[   23.617215] NET: Registered protocol family 17
[   23.621900] NET: Registered protocol family 5
[   23.626367] 8021q: 802.1Q VLAN Support v1.8
[   23.630563] NET: Registered protocol family 37
[   23.635213] Key type dns_resolver registered
[   23.640611] netpoll: netconsole: local port 6666
[   23.645275] netpoll: netconsole: local IPv4 address 192.168.1.252
[   23.651342] netpoll: netconsole: interface 'eth0'
[   23.656113] netpoll: netconsole: remote port 6666
[   23.660795] netpoll: netconsole: remote IPv4 address 192.168.1.208
[   23.666978] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[   23.673858] netpoll: netconsole: device eth0 not up yet, forcing it
[   23.963180] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   23.983176] ata2.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f
[   24.044867] ata2.00: hard resetting link
[   24.393935] ata2.01: hard resetting link
[   24.788050] netpoll: netconsole: carrier detect appears untrustworthy, waiting 4 seconds
[   24.913448] ata2.02: hard resetting link
[   25.423425] ata2.03: hard resetting link
[   25.833211] ata2.01: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[   25.839451] ata2.01: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   25.923217] ata2.01: configured for UDMA/133
[   25.983208] ata2.02: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[   25.989450] ata2.02: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   26.073216] ata2.02: configured for UDMA/133
[   26.077644] ata2: EH complete
[   26.093437] scsi 1:1:0:0: Direct-Access     ATA      ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[   26.102009] fvdw1 disk index before get_sd_name = 3
[   26.106914] device-name= sata_mv
[   26.110122] fvdw2 disk index after get_sd_name = 4
[   26.114919] fvdw3 prefix[0]=s  prefix[1]=d
[   26.118995] fvdw4 diskname = sde
[   26.122706] sd 1:1:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   26.130801] sd 1:1:0:0: Attached scsi generic sg3 type 0
[   26.136183] sd 1:1:0:0: [sde] 4096-byte physical blocks
[   26.141866] scsi 1:2:0:0: Direct-Access     ATA      ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[   26.150327] sd 1:1:0:0: [sde] Write Protect is off
[   26.155237] sd 1:1:0:0: [sde] Mode Sense: 00 3a 00 00
[   26.155646] sd 1:1:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.164871] fvdw1 disk index before get_sd_name = 4
[   26.169729] device-name= sata_mv
[   26.172943] fvdw2 disk index after get_sd_name = 3
[   26.178791] fvdw3 prefix[0]=s  prefix[1]=d
[   26.182870] fvdw4 diskname = sdd
[   26.186630] sd 1:2:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   26.194668] sd 1:2:0:0: Attached scsi generic sg4 type 0
[   26.200113] sd 1:2:0:0: [sdd] 4096-byte physical blocks
[   26.206231] sd 1:2:0:0: [sdd] Write Protect is off
[   26.211240] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[   26.211355] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.242711]  sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8
[   26.251010] sd 1:1:0:0: [sde] Attached SCSI disk
[   26.262641]  sdd: sdd4 < sdd5 sdd6 sdd7 sdd8 >
[   26.269222] sd 1:2:0:0: [sdd] Attached SCSI disk
[   27.621734] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[   28.807161] console [netcon0] enabled
[   28.810817] netconsole: network logging started
[   28.815986] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   28.823056] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   28.835055] Freeing unused kernel memory: 1932K (c0767000 - c094a000)
[   29.922975] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   39.011684] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   39.021922] ehci-orion: EHCI orion driver
[   39.026145] orion-ehci orion-ehci.0: EHCI Host Controller
[   39.031565] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[   39.039287] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[   39.063188] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[   39.069230] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   39.076036] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   39.083260] usb usb1: Product: EHCI Host Controller
[   39.088130] usb usb1: Manufacturer: Linux 3.14.2 ehci_hcd
[   39.093541] usb usb1: SerialNumber: orion-ehci.0
[   39.098844] hub 1-0:1.0: USB hub found
[   39.102648] hub 1-0:1.0: 1 port detected
[   39.113111] usbcore: registered new interface driver usb-storage
[   39.423573] usb 1-1: new high-speed USB device number 2 using orion-ehci
[   39.573691] usb 1-1: New USB device found, idVendor=0424, idProduct=2512
[   39.580404] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   39.598075] hub 1-1:1.0: USB hub found
[   39.602765] hub 1-1:1.0: 2 ports detected
[  154.703215] random: nonblocking pool is initialized
[  323.363406] EXT3-fs (sda5): warning: mounting fs with errors, running e2fsck is recommended
[  323.371813] kjournald starting.  Commit interval 5 seconds
[  323.377367] EXT3-fs (sda5): using internal journal
[  323.433293] EXT3-fs (sda5): recovery complete
[  323.437651] EXT3-fs (sda5): mounted filesystem with ordered data mode
root@fvdw-sta-kirkwood:/ #

then reboot -f

[Jocko]

I am sorry I made an error. To be able to use e2fsck command you have to load it first.

So get again a telnet window via fvdw-sl console and do

Code: Select all

./fvdw-sl-programs

then select the 4th item "Upload and extract glibc mini and tools"
after this step do

Code: Select all

dmesg -c    <----- you have to use the option 'c' to flush it
e2fsck -y /dev/sda5
mkdir /sda5
mount /dev/sda5 /sda5
dmesg

[Draftmancorp]

did ti ok!

i don't know if i can copy/paste all... there is a blue screen inside

Code: Select all

bin/
bin/bash
bin/dd-64
etc/
etc/group
etc/ld.so.cache
etc/sudoers
etc/vsftpd.conf
lib/
lib/libutil.so.1
lib/libc-2.17.so
lib/libnss_files.so.2
lib/libdl-2.17.so
lib/libcrypt.so.1
lib/libdl.so.2
lib/librt.so.1
lib/libnss_compat-2.17.so
lib/libnss_files-2.17.so
lib/libnss_compat.so.2
lib/libresolv-2.17.so
lib/librt-2.17.so
lib/libanl-2.17.so
lib/libc.so.6

















                    Upload and extract glibc mini and tools script version 1.0 ┐
                    │                                                          │ 
                    │ Archive successfully extracted                           │ 
                    │                                                          │ 
                    │  ┌────────────────────────────────────────────────────┐  │ 
                    │  │                        100%                        │  │ 
                    │  └────────────────────────────────────────────────────┘  │ 
                    └──────────────────────────────────────────────────────────┘ 
                     
















root@fvdw-sta-kirkwood:/ # dmesg -c
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.2 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #171 PREEMPT Wed Jan 17 23:33:31 CET 2018
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: LaCie 5Big Network v2
[    0.000000] Ignoring unrecognised tag 0x41000403
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c0982898, node_mem_map dfbfb000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.1.252/,6666@192.168.1.208/
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 509780K/524288K available (5950K kernel code, 220K rwdata, 1596K rodata, 1933K init, 233K bss, 14508K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0766b44   (7547 kB)
[    0.000000]       .init : 0xc0767000 - 0xc094a4cc   (1934 kB)
[    0.000000]       .data : 0xc094c000 - 0xc0983100   ( 221 kB)
[    0.000000]        .bss : 0xc098310c - 0xc09bd56c   ( 234 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:114
[    0.000011] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
[   16.247770] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[   16.337742] pid_max: default: 32768 minimum: 301
[   16.337878] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[   16.337897] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[   16.338442] CPU: Testing write buffer coherency: ok
[   16.338752] Setting up static identity map for 0x5a6ac0 - 0x5a6b18
[   16.341347] VFP support v0.3: not present
[   16.341870] xor: measuring software checksum speed
[   16.437775]    arm4regs  :  1089.200 MB/sec
[   16.537735]    8regs     :   654.400 MB/sec
[   16.637727]    32regs    :   878.000 MB/sec
[   16.637743] xor: using function: arm4regs (1089.200 MB/sec)
[   16.637759] pinctrl core: initialized pinctrl subsystem
[   16.637874] NET: Registered protocol family 16
[   16.638233] DMA: preallocated 256 KiB pool for atomic coherent allocations
[   16.640940] Kirkwood: MV88F6281-A0, TCLK=166666667.
[   16.640965] Feroceon L2: Enabling L2
[   16.641003] Feroceon L2: Cache support initialised.
[   16.642092] mv_usb_init 1
[   16.642111] mv_usb_init 2 devnum = 0
[   16.642124] init function mv_usb_init finished
[   16.642132] initial MPP regs: 01112222 00003311 33331100 33003333 00000033 00000000 00000000
[   16.642163]   final MPP regs: 01112222 00003311 33331100 33003333 00000033 00000000 00000000
[   16.642348]  orion-ehci registered
[   16.644175] orion_gpio_is_valid: invalid GPIO 7
[   16.644657] Kirkwood PCIe port 0: link down
[   16.644668] Kirkwood PCIe port 1: link up
[   16.644677] PCI: bus0 uses PCIe port 0
[   16.644918] PCI host bridge to bus 0000:00
[   16.644940] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[   16.644954] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
[   16.644967] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[   16.645014] pci 0000:00:00.0: [11ab:6281] type 00 class 0x058000
[   16.645043] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref]
[   16.645061] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x1fffffff]
[   16.645111] pci 0000:00:00.0: supports D1 D2
[   16.645387] PCI: bus0: Fast back to back transfers disabled
[   16.645406] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[   16.645418] PCI: bus1 uses PCIe port 1
[   16.645641] PCI host bridge to bus 0000:01
[   16.645660] pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff]
[   16.645674] pci_bus 0000:01: root bus resource [io  0x10000-0x1ffff]
[   16.645687] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[   16.645725] PCI: bus1: Fast back to back transfers enabled
[   16.645739] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[   16.669918] bio: create slab <bio-0> at 0
[   16.838898] raid6: int32x1     95 MB/s
[   17.007887] raid6: int32x2    123 MB/s
[   17.177953] raid6: int32x4    120 MB/s
[   17.347820] raid6: int32x8    128 MB/s
[   17.347831] raid6: using algorithm int32x8 (128 MB/s)
[   17.347838] raid6: using intx1 recovery algorithm
[   17.348663] SCSI subsystem initialized
[   17.349119] libata version 3.00 loaded.
[   17.350004] usbcore: registered new interface driver usbfs
[   17.350178] usbcore: registered new interface driver hub
[   17.350375] usbcore: registered new device driver usb
[   17.352853] cfg80211: Calling CRDA to update world regulatory domain
[   17.353098] Switched to clocksource orion_clocksource
[   17.355371] NET: Registered protocol family 2
[   17.355838] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[   17.355896] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[   17.355948] TCP: Hash tables configured (established 4096 bind 4096)
[   17.356001] TCP: reno registered
[   17.356013] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   17.356036] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   17.356227] NET: Registered protocol family 1
[   17.356495] RPC: Registered named UNIX socket transport module.
[   17.356506] RPC: Registered udp transport module.
[   17.356513] RPC: Registered tcp transport module.
[   17.356520] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   17.356541] PCI: CLS 32 bytes, default 32
[   17.503096] NetWinder Floating Point Emulator V0.97 (double precision)
[   17.503220] gpio-usb-probe-4b err=0
[   17.503237] gpio-usb gpio-usb: USB GPIO's initialized
[   17.504834] futex hash table entries: 256 (order: -1, 3072 bytes)
[   17.606512] VFS: Disk quotas dquot_6.5.2
[   17.606561] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   17.606992] NFS: Registering the id_resolver key type
[   17.607039] Key type id_resolver registered
[   17.607049] Key type id_legacy registered
[   17.607067] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[   17.607080] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   17.607184] NTFS driver 2.1.30 [Flags: R/W].
[   17.607215] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[   17.607360] fuse init (API version 7.22)
[   17.607981] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   17.608397] msgmni has been set to 995
[   17.609518] async_tx: api initialized (async)
[   17.609703] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   17.609715] io scheduler noop registered
[   17.609724] io scheduler deadline registered
[   17.609743] io scheduler cfq registered (default)
[   17.610123] mv_xor mv_xor.0: Marvell shared XOR driver
[   17.647752] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[   17.687751] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[   17.688000] mv_xor mv_xor.1: Marvell shared XOR driver
[   17.727748] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[   17.767748] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[   17.773618] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   17.794732] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[   18.419301] console [ttyS0] enabled
[   18.432197] brd: module loaded
[   18.439892] loop: module loaded
[   18.443324] Uniform Multi-Platform E-IDE driver
[   18.448191] ide-gd driver 1.18
[   18.452737] sata_mv sata_mv.0: version 1.28
[   18.452801] sata_mv sata_mv.0: cannot get optional clkdev
[   18.458629] sata_mv sata_mv.0: slots 32 ports 2
[   18.466168] scsi0 : sata_mv
[   18.469688] scsi1 : sata_mv
[   18.472878] ata1: SATA max UDMA/133 irq 21
[   18.476956] ata2: SATA max UDMA/133 irq 21
[   18.483683] m25p80 spi0.0: mx25l4005a (512 Kbytes)
[   18.488731] Creating 2 MTD partitions on "spi_flash":
[   18.493763] 0x000000000000-0x00000007d000 : "u-boot"
[   18.500000] 0x00000007e000-0x00000007f000 : "u-boot-env"
[   18.508115] tun: Universal TUN/TAP device driver, 1.6
[   18.513146] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   18.519608] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   18.527836] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   18.544161] libphy: orion_mdio_bus: probed
[   18.548526] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   18.987721] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   19.007801] ata1.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f
[   19.069289] ata1.00: hard resetting link
[   19.418476] ata1.01: hard resetting link
[   19.662070] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:8d:9a:81
[   19.937978] ata1.02: hard resetting link
[   20.457973] ata1.03: hard resetting link
[   20.760496] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:d0:4b:8d:39:dd
[   20.769334] PPP generic driver version 2.4.2
[   20.773908] PPP Deflate Compression module registered
[   20.779103] PPP MPPE Compression module registered
[   20.783869] NET: Registered protocol family 24
[   20.788521] usbcore: registered new interface driver rtl8187
[   20.794151] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[   20.801865] usbcore: registered new interface driver pegasus
[   20.807737] usbcore: registered new interface driver asix
[   20.813260] usbcore: registered new interface driver ax88179_178a
[   20.820015] usbcore: registered new interface driver cdc_ether
[   20.826002] usbcore: registered new interface driver net1080
[   20.831841] usbcore: registered new interface driver cdc_subset
[   20.837957] usbcore: registered new interface driver zaurus
[   20.843709] usbcore: registered new interface driver ipheth
[   20.849455] usbcore: registered new interface driver cdc_ncm
[   20.856094] aoe: cannot create debugfs directory
[   20.860865] aoe: AoE v85 initialised.
[   21.037755] ata1.01: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[   21.043997] ata1.01: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   21.327758] ata1.01: configured for UDMA/133
[   21.387753] ata1.02: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[   21.393994] ata1.02: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   21.677760] ata1.02: configured for UDMA/133
[   21.717749] ata1.03: ATA-9: ST2000DM006-2DM164, CC26, max UDMA/133
[   21.723903] ata1.03: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   21.787759] ata1.03: configured for UDMA/133
[   21.792191] ata1: EH complete
[   21.807986] scsi 0:1:0:0: Direct-Access     ATA      ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[   21.816564] fvdw1 disk index before get_sd_name = 0
[   21.821470] device-name= sata_mv
[   21.824685] fvdw2 disk index after get_sd_name = 2
[   21.829483] fvdw3 prefix[0]=s  prefix[1]=d
[   21.833559] fvdw4 diskname = sdc
[   21.837252] sd 0:1:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   21.845342] sd 0:1:0:0: Attached scsi generic sg0 type 0
[   21.850726] sd 0:1:0:0: [sdc] 4096-byte physical blocks
[   21.856414] scsi 0:2:0:0: Direct-Access     ATA      ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[   21.864828] sd 0:1:0:0: [sdc] Write Protect is off
[   21.869631] rtc-mv rtc-mv: internal RTC not ticking
[   21.874591] sd 0:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[   21.874704] sd 0:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   21.884303] i2c /dev entries driver
[   21.887904] fvdw1 disk index before get_sd_name = 1
[   21.892760] device-name= sata_mv
[   21.895974] fvdw2 disk index after get_sd_name = 1
[   21.902838] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[   21.909611] fvdw3 prefix[0]=s  prefix[1]=d
[   21.914079] fvdw4 diskname = sdb
[   21.918187] sd 0:2:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   21.926448] sd 0:2:0:0: [sdb] 4096-byte physical blocks
[   21.931911] sd 0:2:0:0: Attached scsi generic sg1 type 0
[   21.938084] scsi 0:3:0:0: Direct-Access     ATA      ST2000DM006-2DM1 CC26 PQ: 0 ANSI: 5
[   21.946595] sd 0:2:0:0: [sdb] Write Protect is off
[   21.951434]  sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 >
[   21.958449] sd 0:2:0:0: [sdb] Mode Sense: 00 3a 00 00
[   21.958580] sd 0:2:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   21.968962] fvdw1 disk index before get_sd_name = 2
[   21.973826] device-name= sata_mv
[   21.978658] fvdw2 disk index after get_sd_name = 0
[   21.983433] fvdw3 prefix[0]=s  prefix[1]=d
[   21.987509] fvdw4 diskname = sda
[   21.992112] sd 0:1:0:0: [sdc] Attached SCSI disk
[   21.997357] sd 0:3:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   22.005711] sd 0:3:0:0: Attached scsi generic sg2 type 0
[   22.011186] sd 0:3:0:0: [sda] 4096-byte physical blocks
[   22.017123] sd 0:3:0:0: [sda] Write Protect is off
[   22.022007]  sdb: sdb4 < sdb5 sdb6 sdb7 sdb8 >
[   22.026734] sd 0:3:0:0: [sda] Mode Sense: 00 3a 00 00
[   22.026858] sd 0:3:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   22.039203] sd 0:2:0:0: [sdb] Attached SCSI disk
[   22.048341] md: linear personality registered for level -1
[   22.053803] md: raid0 personality registered for level 0
[   22.059322] md: raid1 personality registered for level 1
[   22.064611] md: raid10 personality registered for level 10
[   22.070371] md: raid6 personality registered for level 6
[   22.075661] md: raid5 personality registered for level 5
[   22.081094] md: raid4 personality registered for level 4
[   22.086601] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[   22.095378] device-mapper: multipath: version 1.6.0 loaded
[   22.100879] device-mapper: multipath round-robin: version 1.0.0 loaded
[   22.107424]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[   22.113172] device-mapper: multipath queue-length: version 0.1.0 loaded
[   22.121039] device-mapper: multipath service-time: version 0.2.0 loaded
[   22.127682] device-mapper: dm-log-userspace: version 1.3.0 loaded
[   22.135277] sd 0:3:0:0: [sda] Attached SCSI disk
[   22.139938] device-mapper: raid: Loading target version 1.5.2
[   22.149879] ipip: IPv4 over IPv4 tunneling driver
[   22.155292] TCP: cubic registered
[   22.158838] NET: Registered protocol family 10
[   22.164192] sit: IPv6 over IPv4 tunneling driver
[   22.169769] NET: Registered protocol family 17
[   22.174453] NET: Registered protocol family 5
[   22.178930] 8021q: 802.1Q VLAN Support v1.8
[   22.183124] NET: Registered protocol family 37
[   22.187575] Key type dns_resolver registered
[   22.193050] netpoll: netconsole: local port 6666
[   22.197650] netpoll: netconsole: local IPv4 address 192.168.1.252
[   22.203773] netpoll: netconsole: interface 'eth0'
[   22.208485] netpoll: netconsole: remote port 6666
[   22.213167] netpoll: netconsole: remote IPv4 address 192.168.1.208
[   22.219390] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[   22.226232] netpoll: netconsole: device eth0 not up yet, forcing it
[   22.517722] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   22.537801] ata2.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f
[   22.599332] ata2.00: hard resetting link
[   22.948475] ata2.01: hard resetting link
[   23.342459] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.467986] ata2.02: hard resetting link
[   23.977968] ata2.03: hard resetting link
[   24.387758] ata2.01: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[   24.394002] ata2.01: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   24.477760] ata2.01: configured for UDMA/133
[   24.537751] ata2.02: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[   24.543991] ata2.02: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   24.627762] ata2.02: configured for UDMA/133
[   24.632193] ata2: EH complete
[   24.647988] scsi 1:1:0:0: Direct-Access     ATA      ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[   24.656547] fvdw1 disk index before get_sd_name = 3
[   24.661467] device-name= sata_mv
[   24.664697] fvdw2 disk index after get_sd_name = 4
[   24.669509] fvdw3 prefix[0]=s  prefix[1]=d
[   24.673601] fvdw4 diskname = sde
[   24.677343] sd 1:1:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   24.685400] sd 1:1:0:0: Attached scsi generic sg3 type 0
[   24.690782] sd 1:1:0:0: [sde] 4096-byte physical blocks
[   24.696474] scsi 1:2:0:0: Direct-Access     ATA      ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[   24.704889] sd 1:1:0:0: [sde] Write Protect is off
[   24.709808] sd 1:1:0:0: [sde] Mode Sense: 00 3a 00 00
[   24.710218] sd 1:1:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.719345] fvdw1 disk index before get_sd_name = 4
[   24.724201] device-name= sata_mv
[   24.727414] fvdw2 disk index after get_sd_name = 3
[   24.733251] fvdw3 prefix[0]=s  prefix[1]=d
[   24.737325] fvdw4 diskname = sdd
[   24.741078] sd 1:2:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   24.749121] sd 1:2:0:0: Attached scsi generic sg4 type 0
[   24.754563] sd 1:2:0:0: [sdd] 4096-byte physical blocks
[   24.761012] sd 1:2:0:0: [sdd] Write Protect is off
[   24.765792] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[   24.765905] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.796298]  sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8
[   24.804595] sd 1:1:0:0: [sde] Attached SCSI disk
[   24.818218]  sdd: sdd4 < sdd5 sdd6 sdd7 sdd8 >
[   24.824770] sd 1:2:0:0: [sdd] Attached SCSI disk
[   26.310789] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[   26.320613] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   26.331659] console [netcon0] enabled
[   26.335314] netconsole: network logging started
[   26.340470] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   26.347542] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   26.359527] Freeing unused kernel memory: 1932K (c0767000 - c094a000)
[   27.447760] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   36.536176] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   36.546401] ehci-orion: EHCI orion driver
[   36.550624] orion-ehci orion-ehci.0: EHCI Host Controller
[   36.556043] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[   36.563770] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[   36.587730] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[   36.593778] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   36.600584] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   36.607808] usb usb1: Product: EHCI Host Controller
[   36.612680] usb usb1: Manufacturer: Linux 3.14.2 ehci_hcd
[   36.618088] usb usb1: SerialNumber: orion-ehci.0
[   36.623393] hub 1-0:1.0: USB hub found
[   36.627197] hub 1-0:1.0: 1 port detected
[   36.637674] usbcore: registered new interface driver usb-storage
[   36.948266] usb 1-1: new high-speed USB device number 2 using orion-ehci
[   37.098300] usb 1-1: New USB device found, idVendor=0424, idProduct=2512
[   37.105014] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   37.122625] hub 1-1:1.0: USB hub found
[   37.127275] hub 1-1:1.0: 2 ports detected
[   69.894051] random: nonblocking pool is initialized
root@fvdw-sta-kirkwood:/ # e2fsck -y /dev/sda5
e2fsck 1.41.14 (22-Dec-2010)
/dev/sda5: recovering journal
/dev/sda5 contains a file system with errors, check forced.
Pass 1: Checking inodes, blocks, and sizes
Deleted inode 60 has zero dtime.  Fix? yes

Deleted inode 61 has zero dtime.  Fix? yes

Deleted inode 62 has zero dtime.  Fix? yes

Deleted inode 63 has zero dtime.  Fix? yes

Deleted inode 64 has zero dtime.  Fix? yes

Deleted inode 65 has zero dtime.  Fix? yes

Deleted inode 67 has zero dtime.  Fix? yes

Deleted inode 68 has zero dtime.  Fix? yes

Deleted inode 69 has zero dtime.  Fix? yes

Deleted inode 71 has zero dtime.  Fix? yes

Deleted inode 7522 has zero dtime.  Fix? yes

Deleted inode 7523 has zero dtime.  Fix? yes

Deleted inode 7524 has zero dtime.  Fix? yes

Deleted inode 7525 has zero dtime.  Fix? yes

Deleted inode 7526 has zero dtime.  Fix? yes

Deleted inode 7527 has zero dtime.  Fix? yes

Deleted inode 7528 has zero dtime.  Fix? yes

Deleted inode 7529 has zero dtime.  Fix? yes

Deleted inode 7530 has zero dtime.  Fix? yes

Deleted inode 7531 has zero dtime.  Fix? yes

Deleted inode 7532 has zero dtime.  Fix? yes

Deleted inode 7533 has zero dtime.  Fix? yes

Deleted inode 7534 has zero dtime.  Fix? yes

Deleted inode 7535 has zero dtime.  Fix? yes

Deleted inode 7536 has zero dtime.  Fix? yes

Deleted inode 7537 has zero dtime.  Fix? yes

Deleted inode 7538 has zero dtime.  Fix? yes

Deleted inode 7540 has zero dtime.  Fix? yes

Deleted inode 7541 has zero dtime.  Fix? yes

Deleted inode 7542 has zero dtime.  Fix? yes

Deleted inode 7544 has zero dtime.  Fix? yes

Deleted inode 14992 has zero dtime.  Fix? yes

Deleted inode 14993 has zero dtime.  Fix? yes

Deleted inode 14994 has zero dtime.  Fix? yes

Deleted inode 14995 has zero dtime.  Fix? yes

Deleted inode 14996 has zero dtime.  Fix? yes

Deleted inode 14997 has zero dtime.  Fix? yes

Deleted inode 14998 has zero dtime.  Fix? yes

Deleted inode 14999 has zero dtime.  Fix? yes

Deleted inode 15000 has zero dtime.  Fix? yes

Deleted inode 15001 has zero dtime.  Fix? yes

Deleted inode 15002 has zero dtime.  Fix? yes

Deleted inode 15003 has zero dtime.  Fix? yes

Deleted inode 15004 has zero dtime.  Fix? yes

Deleted inode 15005 has zero dtime.  Fix? yes

Deleted inode 15006 has zero dtime.  Fix? yes

Deleted inode 15007 has zero dtime.  Fix? yes

Deleted inode 15008 has zero dtime.  Fix? yes

Deleted inode 15009 has zero dtime.  Fix? yes

Deleted inode 15010 has zero dtime.  Fix? yes

Deleted inode 15012 has zero dtime.  Fix? yes

Deleted inode 15013 has zero dtime.  Fix? yes

Deleted inode 15014 has zero dtime.  Fix? yes

Deleted inode 22481 has zero dtime.  Fix? yes

Deleted inode 22482 has zero dtime.  Fix? yes

Deleted inode 22486 has zero dtime.  Fix? yes

Deleted inode 22488 has zero dtime.  Fix? yes

Deleted inode 29941 has zero dtime.  Fix? yes

Deleted inode 29942 has zero dtime.  Fix? yes

Deleted inode 29943 has zero dtime.  Fix? yes

Deleted inode 29944 has zero dtime.  Fix? yes

Deleted inode 29945 has zero dtime.  Fix? yes

Deleted inode 29946 has zero dtime.  Fix? yes

Deleted inode 29947 has zero dtime.  Fix? yes

Deleted inode 29948 has zero dtime.  Fix? yes

Deleted inode 29949 has zero dtime.  Fix? yes

Deleted inode 29950 has zero dtime.  Fix? yes

Deleted inode 29951 has zero dtime.  Fix? yes

Deleted inode 29952 has zero dtime.  Fix? yes

Deleted inode 29953 has zero dtime.  Fix? yes

Deleted inode 29954 has zero dtime.  Fix? yes

Deleted inode 37408 has zero dtime.  Fix? yes

Deleted inode 37409 has zero dtime.  Fix? yes

Deleted inode 37410 has zero dtime.  Fix? yes

Deleted inode 37411 has zero dtime.  Fix? yes

Deleted inode 37412 has zero dtime.  Fix? yes

Deleted inode 37413 has zero dtime.  Fix? yes

Deleted inode 37414 has zero dtime.  Fix? yes

Deleted inode 37415 has zero dtime.  Fix? yes

Deleted inode 37416 has zero dtime.  Fix? yes

Deleted inode 37417 has zero dtime.  Fix? yes

Deleted inode 37418 has zero dtime.  Fix? yes

Deleted inode 37419 has zero dtime.  Fix? yes

Deleted inode 37420 has zero dtime.  Fix? yes

Deleted inode 37421 has zero dtime.  Fix? yes

Deleted inode 37422 has zero dtime.  Fix? yes

Deleted inode 37423 has zero dtime.  Fix? yes

Deleted inode 37424 has zero dtime.  Fix? yes

Deleted inode 37425 has zero dtime.  Fix? yes

Deleted inode 37426 has zero dtime.  Fix? yes

Deleted inode 37427 has zero dtime.  Fix? yes

Deleted inode 37429 has zero dtime.  Fix? yes

Deleted inode 37430 has zero dtime.  Fix? yes

Deleted inode 37432 has zero dtime.  Fix? yes

Deleted inode 44835 has zero dtime.  Fix? yes

Deleted inode 44836 has zero dtime.  Fix? yes

Deleted inode 44837 has zero dtime.  Fix? yes

Deleted inode 44838 has zero dtime.  Fix? yes

Deleted inode 44839 has zero dtime.  Fix? yes

Deleted inode 44840 has zero dtime.  Fix? yes

Deleted inode 44841 has zero dtime.  Fix? yes

Deleted inode 44842 has zero dtime.  Fix? yes

Deleted inode 44843 has zero dtime.  Fix? yes

Deleted inode 44844 has zero dtime.  Fix? yes

Deleted inode 44845 has zero dtime.  Fix? yes

Deleted inode 44846 has zero dtime.  Fix? yes

Deleted inode 44847 has zero dtime.  Fix? yes

Deleted inode 44848 has zero dtime.  Fix? yes

Deleted inode 44849 has zero dtime.  Fix? yes

Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Block bitmap differences:  -560 -594 -627 -662 -695 -(720--734) -760 -797 -830 -863 -928 -993 -28721 -28756 -28789 -28825 -28858 -28891 -28924 -28962 -29027 -29092 -29157 -29222 -29287
Fix? yes

Inode bitmap differences:  -(60--65) -(67--69) -71 -(7522--7538) -(7540--7542) -7544 -(14992--15010) -(15012--15014) -(22481--22482) -22486 -22488 -(29941--29954) -(37408--37427) -(37429--37430) -37432 -(44835--44849)
Fix? yes

Free inodes count wrong for group #0 (7449, counted=7459).
Fix? yes

Free inodes count wrong for group #1 (7449, counted=7470).
Fix? yes

Free inodes count wrong for group #2 (7450, counted=7472).
Fix? yes

Free inodes count wrong for group #3 (7374, counted=7378).
Fix? yes

Free inodes count wrong for group #4 (7449, counted=7463).
Fix? yes

Free inodes count wrong for group #5 (7449, counted=7472).
Fix? yes

Free inodes count wrong for group #6 (7457, counted=7472).
Fix? yes

Free inodes count wrong (52077, counted=52186).
Fix? yes


/dev/sda5: ***** FILE SYSTEM WAS MODIFIED *****
/dev/sda5: 118/52304 files (6.8% non-contiguous), 8278/208845 blocks
root@fvdw-sta-kirkwood:/ # mkdir /sda5
root@fvdw-sta-kirkwood:/ # mount /dev/sda5 /sda5
root@fvdw-sta-kirkwood:/ # dmesg
[  136.065578] kjournald starting.  Commit interval 5 seconds
[  136.071133] EXT3-fs (sda5): using internal journal
[  136.075910] EXT3-fs (sda5): mounted filesystem with ordered data mode
root@fvdw-sta-kirkwood:/ # reboot -f