After power Black out

[araldo60]

I need all outputs !

this is what i see from the console i must do something else ?

[Jocko]

So it seems after removing sda1boot, you succeeded to reboot and upgrade again the fw from its web-interface !
Can you confirm that point please

Note: you did not post the output of

Code: Select all

cat /sda1/boot.log

[araldo60]

So it seems after removing sda1boot, you succeeded to reboot and upgrade again the fw from its web-interface !
Can you confirm that point please

all process to update firmware before is ok re upgraded to 18.2

Note: you did not post the output of

Code: Select all

cat /sda1/boot.log

http://www.web-console.org
login: root
password: *********
You are authenticated
root@Lacie-2-Big.local /$ mkdir /sda7 /sda1 /sda2
root@Lacie-2-Big.local /$ mount /dev/sda7 /sda7
root@Lacie-2-Big.local /$ mount /dev/sda1 /sda1
root@Lacie-2-Big.local /$ mount /dev/sda2 /sda2
mount: /sda2: wrong fs type, bad option, bad superblock on /dev/sda2, missing codepage or helper program
, or other error.
root@Lacie-2-Big.local /$ cat /sda7/boot.log
start boot log
is a physical machine
detect and set platform
2big2
kirkwood
UIMAGE-414133-KIRKWOOD-1
Current kernel: 4.14.133 #1 PREEMPT Wed Jul 17 14:46:56 CEST 2019
2big2
kirkwood
mount dev/pts
update dev nodes
booting using sda1 file system...
else loop1 finished
rcS finished

root@Lacie-2-Big.local /$ ls /sda7/lacie-boot
sda1boot
root@Lacie-2-Big.local /$ cat /sda1/boot.log
start boot log
is a physical machine
detect and set platform
2big2
kirkwood
UIMAGE-414133-KIRKWOOD-1
Current kernel: 4.14.133 #1 PREEMPT Wed Jul 17 14:46:56 CEST 2019
2big2
kirkwood
mount dev/pts
update dev nodes
booting using sda1 root file system...
make dev node for buttons...
make dev node for tun device...
enable IP forwarding...
run udevstart to update dev nodes when necessary
inserting kernel modules:
modprobe: module 'iscsi_trgt' not found
start buttons control daemon
device = 2big2
source = buttons-nwsp2
buttons-nwsp2 daemon started
root@Lacie-2-Big.local /$ cat /sda2/boot.log
cat: can't open '/sda2/boot.log': No such file or directory

[Jocko]

Please can you post more feedback !

So:
- After removing sda1boot, you got again full access on the nas ?
- fw upgrade succeeded ?
-

Code: Select all

http://www.web-console.org

I do not understand that

[araldo60]

Please can you post more feedback !

So:
- After removing sda1boot, you got again full access on the nas ?
- fw upgrade succeeded ?
-

Code: Select all

http://www.web-console.org

I do not understand that

http://www.web-console.org is located on web console access is only a description
yes is not possible access in any step you suggest after firmware remove
after upgrade.

[Jocko]

So really I do not understand, if you have this output ("
http://www.web-console.org
login: root
password: *********
You are authenticated"), that means you use the web-console from the firmware web-interface !
:scratch

[araldo60]

So really I do not understand, if you have this output ("
http://www.web-console.org
login: root
password: *********
You are authenticated"), that means you use the web-console from the firmware web-interface !
:scratch

yes
i must connect under putty or something else ?

[Jocko]

:thinking :thinking :thinking

How is it possible ? if you are using the web console that means the firmware is running (at least the apache server is running) and it is not what claims the content of boot.log in sda1 :scratch

[araldo60]

:thinking :thinking :thinking

How is it possible ? if you are using the web console that means the firmware is running (at least the apache server is running) and it is not what claims the content of boot.log in sda1 :scratch

ok what can i do ??? or how can i help or what can i verify

[fvdw]

Jocko wrote this.

So it seems after removing sda1boot, you succeeded to reboot and upgrade again the fw from its web-interface !
Can you confirm that point please

Please answer the question otherwise we can not help you any further, thank you

And I have one more for you, does the fvdw-sl webinterface works, it must otherwise how do you use the web-console, it must ne used from within the webinterface