Remote share (Solved)

[prufa]

Hi I'm having trouble mounting SMB remote share from cloudbox to my raspberry pi.
I can mount it if I ssh into the cloudbox but it doesn't automap then.
If I try to mount it from webgui I get the error Fail, Cannot mount the remote share(/mnt/remote_share_mount_dir)

I can mount other shares in cloudbox but not the share from raspberry pi.
I can access the share from my windows computer and also if I use SSH.

Can anybody tell me how I can automount this share if I do this by connecting via SSH into the cloudbox ?

[Jocko]

Hi
Can you please confirm what is your attempt because you wrote the both opposite ways

I'm having trouble mounting SMB remote share from cloudbox to my raspberry pi.

so you tried to mount a cloudbox share on your raspberry and

If I try to mount it from webgui I get the error Fail, Cannot mount the remote share(/mnt/remote_share_mount_dir)

here you tried to mount a raspberry share on the nas

[prufa]

Hi
Can you please confirm what is your attempt because you wrote the both opposite ways

I'm having trouble mounting SMB remote share from cloudbox to my raspberry pi.

so you tried to mount a cloudbox share on your raspberry and

If I try to mount it from webgui I get the error Fail, Cannot mount the remote share(/mnt/remote_share_mount_dir)

here you tried to mount a raspberry share on the nas

Hi sorry for the misunderstanding.

So I have a raspberry pi that has an external hard drive connected to it and the external hard drive is shared.
So I'm trying to connect/mount to that share from Cloudbox webgui. But when I do that I get the following error: Fail, Cannot mount the remote share(/mnt/remote_share_mount_dir)

When I mount other shares in the Cloudbox webgui they work but not when I'm trying to connect/mount to the raspberry pi drive.
I can access the share on the raspberry pi if I connect to the Cloudbox via SSH and use the following command: mount -t cifs //Raspberrypi/Share /mnt/mountpoint -o rw,iocharset=utf8,username=xxxxx,password=yyyyy
And that share appears in the webgui but if I restart cloudbox the share is gone.

So is there anyway for me to automount the raspberry pi share in the cloudbox ?

I can access the share on the raspberry pi from a windows computer but not from cloudbox.

[Jocko]

What firmware version do you use ?

If you have version 18.1, the firmware tries successively to use these commands according to the smb version supported remotely:

Code: Select all

/* try first with smb3 support */
 mount -t cifs //Raspberrypi/Share /mnt/mountpoint -o sec=ntlmv2,vers=3.0,rw,iocharset=utf8,username='xxxxx',password='yyyyy'

/* next with smb2.1 support */
 mount -t cifs //Raspberrypi/Share /mnt/mountpoint -o sec=ntlmv2,vers=2.1,rw,iocharset=utf8,username='xxxxx',password='yyyyy'

/* next with smb2.0 support */
 mount -t cifs //Raspberrypi/Share /mnt/mountpoint -o sec=ntlmv2,vers=2.0,rw,iocharset=utf8,username='xxxxx',password='yyyyy'

/* next with smb1 support */
 mount -t cifs //Raspberrypi/Share /mnt/mountpoint -o sec=ntlm,vers=1.0,rw,iocharset=utf8,username='xxxxx',password='yyyyy'


If at least one command works, that would means there is an issue on your login/password which contain an unsupported char

[prufa]

What firmware version do you use ?

If you have version 18.1, the firmware tries successively to use these commands according to the smb version supported remotely:

Code: Select all

/* try first with smb3 support */
 mount -t cifs //Raspberrypi/Share /mnt/mountpoint -o sec=ntlmv2,vers=3.0,rw,iocharset=utf8,username=xxxxx,password=yyyyy

/* next with smb2.1 support */
 mount -t cifs //Raspberrypi/Share /mnt/mountpoint -o sec=ntlmv2,vers=2.1,rw,iocharset=utf8,username=xxxxx,password=yyyyy

/* next with smb2.01 support */
 mount -t cifs //Raspberrypi/Share /mnt/mountpoint -o sec=ntlmv2,vers=2.0,rw,iocharset=utf8,username=xxxxx,password=yyyyy

/* next with smb1 support */
 mount -t cifs //Raspberrypi/Share /mnt/mountpoint -o sec=ntlm,vers=1.0,rw,iocharset=utf8,username=xxxxx,password=yyyyy


If at least one command works, that would means there is an issue on your login/password which contain an unsupported char

Ahh thank you I will try to change the password I think I know what character that is :)
I will let you know what happens.

[Jocko]

Note: I edited my post
username and password are quoted in the command line

[prufa]

I changed the password on the raspberry pi but and removed one character that could been problematic but that didn't work in the webgui.
The SSH command works fine but when I restart the cloudbox the share wont automount again unless I SSH connect again to the cloudbox and mount the share again.

There is a option in the webgui to mount at boot. Do you know what command I can use to do that via SSH ?

[Jocko]

but when I restart the cloudbox the share wont automount again unless I SSH connect again to the cloudbox and mount the share again

is it the expected behaviour as you did not use the related menu from the fw web-interface.

First what is your firmware version

and can you post the output if you use the posted commandline

[prufa]

but when I restart the cloudbox the share wont automount again unless I SSH connect again to the cloudbox and mount the share again

is it the expected behaviour as you did not use the related menu from the fw web-interface.

First what is your firmware version

and can you post the output if you use the posted commandline

The firmware version is 17-0.

I probably need to upgrade ?

Yes will post the output of the commandline after about an hour when I get back home again.

[Jocko]

Yes I'd rather you upgrade to version 18.1, there is some code changes over this feature.

For example with version 17.0, mount will fail if samba version on your raspberry allows only smb2 or smb3. Then the command-line used by the firmware fails because it uses the option 'sec=ntlm'. This option can not be used with version smb2 or smb3.
That works with yours because you do not set this option