FVDW-SL on a Seagate Personal Cloud - additional steps

[m1m1sm1t1c0]

xhci-plat-hcd

Code: Select all

login as: root
root@10.113.1.4's password:
root@ftp:/ # modprobe xhci-plat-hcd
root@ftp:/ # lsmod
xhci_plat_hcd 5796 0 - Live 0xbf132000
xhci_pci 3504 0 - Live 0xbf0be000
xhci_hcd 90052 2 xhci_plat_hcd,xhci_pci, Live 0xbf0a1000
iscsi_tcp 8140 0 - Live 0xbf09b000
libiscsi_tcp 11292 1 iscsi_tcp, Live 0xbf094000
libiscsi 32107 2 iscsi_tcp,libiscsi_tcp, Live 0xbf085000
scsi_transport_iscsi 56358 2 iscsi_tcp,libiscsi, Live 0xbf06a000
usblp 9262 0 - Live 0xbf063000
usb_storage 38422 0 - Live 0xbf04f000
ehci_orion 2794 0 - Live 0xbf04b000
ehci_hcd 36922 1 ehci_orion, Live 0xbf03c000
usbcore 145666 7 xhci_plat_hcd,xhci_pci,xhci_hcd,usblp,usb_storage,ehci_orion,ehci_hcd, Live 0xbf004000
usb_common 2727 1 usbcore, Live 0xbf000000
root@ftp:/ #


[Jocko]

To load again this module on next nas booting do this command

Code: Select all

sed -rie "s/exit 0/modprobe xhci-plat-hcd 2>> boot.log\\nexit 0/" /etc/init.d/insert-modules.nwsp2

(use exactly this command line and use the double quotes)

and post again

Code: Select all

usb-devices

[fvdw]

Did it make a difference eq did your usb3 port works at high speed?

[Jocko]

Maybe a new dmesg output will be informative.

[m1m1sm1t1c0]

Code: Select all

usb-devices

Code: Select all

login as: root
root@10.113.1.4's password:
root@ftp:/ # usb-devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 1
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=04.06
S:  Manufacturer=Linux 4.6.6 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=f1050000.usb
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0781 ProdID=5406 Rev=02.00
S:  Manufacturer=SanDisk
S:  Product=U3 Cruzer Micro
S:  SerialNumber=44567202EE9160BF
C:  #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=04.06
S:  Manufacturer=Linux 4.6.6 xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:01:00.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=5000 MxCh= 2
D:  Ver= 3.00 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=1d6b ProdID=0003 Rev=04.06
S:  Manufacturer=Linux 4.6.6 xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:01:00.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=0951 ProdID=1666 Rev=01.00
S:  Manufacturer=Kingston
S:  Product=DataTraveler 3.0
S:  SerialNumber=08606E6D41E2BD61B343029C
C:  #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=504mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
root@ftp:/ #


[m1m1sm1t1c0]

Did it make a difference eq did your usb3 port works at high speed?

Yes

[m1m1sm1t1c0]

Maybe a new dmesg output will be informative.

Code: Select all

login as: root
root@10.113.1.4's password:
root@ftp:/ # dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.6.6 (root@fvdwsl-5big2.local) (gcc version 4.9.3 (GCC) ) #3 Mon Jun 4 22:11:11 CEST 2018
[    0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: Seagate Personal Cloud (Cumulus, SRN21C)
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c0881a4c, node_mem_map dfb7a000
[    0.000000]   Normal zone: 1152 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129920
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 510036K/524288K available (6123K kernel code, 291K rwdata, 2040K rodata, 228K init, 416K bss, 14252K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0800fbc   (8164 kB)
[    0.000000]       .init : 0xc0801000 - 0xc083a000   ( 228 kB)
[    0.000000]       .data : 0xc083a000 - 0xc0882f60   ( 292 kB)
[    0.000000]        .bss : 0xc0882f60 - 0xc08eb108   ( 417 kB)
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] L2C: DT/platform modifies aux control register: 0x12086302 -> 0x1a086302
[    0.000000] Aurora cache controller enabled, 4 ways, 256 kB
[    0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302
[    0.000000] Switching to timer-based delay loop, resolution 48ns
[    0.000007] sched_clock: 32 bits at 20MHz, resolution 48ns, wraps every 103356786663ns
[    0.000023] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 91987540234 ns
[    0.000293] Console: colour dummy device 80x30
[    0.000310] Calibrating delay loop (skipped), value calculated using timer frequency.. 41.55 BogoMIPS (lpj=207773)
[    0.000324] pid_max: default: 32768 minimum: 301
[    0.000451] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000461] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001052] CPU: Testing write buffer coherency: ok
[    0.001280] Setting up static identity map for 0x8200 - 0x8258
[    0.001581] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1
[    0.001711] mvebu-pmsu: Initializing Power Management Service Unit
[    0.005482] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
[    0.005713] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.005816] xor: measuring software checksum speed
[    0.100056]    arm4regs  :   919.600 MB/sec
[    0.200055]    8regs     :   772.400 MB/sec
[    0.300057]    32regs    :   880.400 MB/sec
[    0.300064] xor: using function: arm4regs (919.600 MB/sec)
[    0.300090] pinctrl core: initialized pinctrl subsystem
[    0.300785] NET: Registered protocol family 16
[    0.301277] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.301881] cpuidle: using governor ladder
[    0.305999] sram soc:sa-sram: found no memory resource
[    0.306021] sram: probe of soc:sa-sram failed with error -22
[    0.306554] No ATAGs?
[    0.306568] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.306690] mvebu-pmsu: CPU idle is currently broken: disabling
[    0.480346] raid6: int32x1  gen()   142 MB/s
[    0.650201] raid6: int32x1  xor()   136 MB/s
[    0.820115] raid6: int32x2  gen()   213 MB/s
[    0.990081] raid6: int32x2  xor()   155 MB/s
[    1.160084] raid6: int32x4  gen()   179 MB/s
[    1.330090] raid6: int32x4  xor()   140 MB/s
[    1.500281] raid6: int32x8  gen()   175 MB/s
[    1.670129] raid6: int32x8  xor()   116 MB/s
[    1.670136] raid6: using algorithm int32x2 gen() 213 MB/s
[    1.670142] raid6: .... xor() 155 MB/s, rmw enabled
[    1.670148] raid6: using intx1 recovery algorithm
[    1.670705] SCSI subsystem initialized
[    1.670874] libata version 3.00 loaded.
[    1.672406] clocksource: Switched to clocksource armada_370_xp_clocksource
[    1.672694] FS-Cache: Loaded
[    1.678467] NET: Registered protocol family 2
[    1.678970] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    1.679006] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    1.679043] TCP: Hash tables configured (established 4096 bind 4096)
[    1.679112] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.679126] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.679240] NET: Registered protocol family 1
[    1.679513] RPC: Registered named UNIX socket transport module.
[    1.679521] RPC: Registered udp transport module.
[    1.679526] RPC: Registered tcp transport module.
[    1.679532] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.679549] PCI: CLS 0 bytes, default 64
[    1.679798] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    1.680704] futex hash table entries: 256 (order: -1, 3072 bytes)
[    1.681301] workingset: timestamp_bits=13 max_order=17 bucket_order=4
[    1.681649] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.681898] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.682268] ntfs: driver 2.1.32 [Flags: R/W].
[    1.682302] fuse init (API version 7.24)
[    1.682583] JFS: nTxBlock = 3984, nTxLock = 31877
[    1.687909] async_tx: api initialized (async)
[    1.688005] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.688022] io scheduler noop registered
[    1.688036] io scheduler deadline registered
[    1.688065] io scheduler cfq registered (default)
[    1.688713] armada-370-pinctrl f1018000.pin-ctrl: registered pinctrl driver
[    1.689485] irq: Cannot allocate irq_descs @ IRQ39, assuming pre-allocated
[    1.689873] irq: Cannot allocate irq_descs @ IRQ71, assuming pre-allocated
[    1.690148] irq: Cannot allocate irq_descs @ IRQ103, assuming pre-allocated
[    1.690816] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
[    1.690832] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    1.690843] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff]
[    1.690854] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.690883] pci 0000:00:01.0: [11ab:6710] type 01 class 0x060400
[    1.691103] PCI: bus0: Fast back to back transfers disabled
[    1.691114] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.691260] pci 0000:01:00.0: [1b21:1142] type 00 class 0x0c0330
[    1.691292] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x40007fff 64bit]
[    1.691557] PCI: bus1: Fast back to back transfers disabled
[    1.691570] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.691635] pci 0000:00:01.0: BAR 8: assigned [mem 0xf8000000-0xf80fffff]
[    1.691650] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf8007fff 64bit]
[    1.691667] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.691679] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xf80fffff]
[    1.691720] pci 0000:00:01.0: enabling device (0140 -> 0142)
[    1.691914] mv_xor f1060800.xor: Marvell shared XOR driver
[    1.733158] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    1.734180] mv_xor f1060900.xor: Marvell shared XOR driver
[    1.773135] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[    1.774310] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.775522] console [ttyS0] disabled
[    1.795651] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 20, base_baud = 12500000) is a 16550A
[    2.477885] console [ttyS0] enabled
[    2.491725] brd: module loaded
[    2.499931] loop: module loaded
[    2.503597] sata_mv f10a0000.sata: version 1.28
[    2.503755] sata_mv f10a0000.sata: slots 32 ports 1
[    2.509621] scsi host0: sata_mv
[    2.513030] ata1: SATA max UDMA/133 irq 28
[    2.518644] m25p80 spi0.0: mx25l8005 (1024 Kbytes)
[    2.523502] 1 ofpart partitions found on MTD device spi0.0
[    2.529013] Creating 1 MTD partitions on "spi0.0":
[    2.533842] 0x000000000000-0x000000100000 : "u-boot"
[    2.540439] libphy: Fixed MDIO Bus: probed
[    2.544591] tun: Universal TUN/TAP device driver, 1.6
[    2.549664] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.555993] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    2.564092] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    2.573176] libphy: orion_mdio_bus: probed
[    2.579219] mvneta f1074000.ethernet eth0: Using hardware mac address 00:10:75:58:85:a8
[    2.587380] PPP generic driver version 2.4.2
[    2.591796] PPP Deflate Compression module registered
[    2.596902] PPP MPPE Compression module registered
[    2.601721] NET: Registered protocol family 24
[    2.606607] aoe: cannot create debugfs directory
[    2.611384] aoe: AoE v85 initialised.
[    2.615457] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0
[    2.633413] md: linear personality registered for level -1
[    2.638932] md: raid0 personality registered for level 0
[    2.644290] md: raid1 personality registered for level 1
[    2.649631] md: raid10 personality registered for level 10
[    2.655390] md: raid6 personality registered for level 6
[    2.660728] md: raid5 personality registered for level 5
[    2.666079] md: raid4 personality registered for level 4
[    2.671561] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.680274] device-mapper: multipath: version 1.11.0 loaded
[    2.685898] device-mapper: multipath round-robin: version 1.1.0 loaded
[    2.692472] device-mapper: multipath queue-length: version 0.2.0 loaded
[    2.699123] device-mapper: multipath service-time: version 0.3.0 loaded
[    2.705830] device-mapper: dm-log-userspace: version 1.3.0 loaded
[    2.711959] device-mapper: raid: Loading target version 1.7.0
[    2.718169] ledtrig-cpu: registered to indicate activity on CPUs
[    2.724487] marvell-cesa: probe of f1090000.crypto failed with error -22
[    2.731345] hidraw: raw HID events driver (C) Jiri Kosina
[    2.737076] Netfilter messages via NETLINK v0.30.
[    2.741814] nfnl_acct: registering with nfnetlink.
[    2.746671] nf_conntrack version 0.5.0 (7969 buckets, 31876 max)
[    2.753347] ipip: IPv4 over IPv4 tunneling driver
[    2.758814] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.764360] NET: Registered protocol family 10
[    2.769740] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.775367] sit: IPv6 over IPv4 tunneling driver
[    2.780608] NET: Registered protocol family 17
[    2.785138] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.797837] Bridge firewalling registered
[    2.801873] NET: Registered protocol family 5
[    2.806387] Key type dns_resolver registered
[    2.811145] registered taskstats version 1
[    2.816259] console [netcon0] enabled
[    2.819940] netconsole: network logging started
[    2.825001] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    2.831932] rtc-mv f1010300.rtc: setting system clock to 2019-01-31 18:15:57 UTC (1548958557)
[    3.032427] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[    3.043228] ata1.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
[    3.049443] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    3.062941] ata1.00: configured for UDMA/133
[    3.067599] scsi 0:0:0:0: Direct-Access     ATA      ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5
[    3.076708] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.084427] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.089885] sd 0:0:0:0: [sda] Write Protect is off
[    3.094718] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.094807] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.145841]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[    3.153038] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.157735] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[    3.193523] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem
[    3.201055] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
[    3.207990] EXT4-fs (sda7): write access will be enabled during recovery
[    3.962861] EXT4-fs (sda7): recovery complete
[    4.042465] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    4.050197] VFS: Mounted root (ext3 filesystem) readonly on device 8:7.
[    4.057186] Freeing unused kernel memory: 228K (c0801000 - c083a000)
[    4.063577] This architecture does not have kernel memory protection.
[    4.324874] EXT4-fs (sda7): warning: checktime reached, running e2fsck is recommended
[    4.352478] EXT4-fs (sda7): re-mounted. Opts: (null)
[    5.108165] usbcore: registered new interface driver usbfs
[    5.113783] usbcore: registered new interface driver hub
[    5.119181] usbcore: registered new device driver usb
[    5.126200] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.133355] ehci-orion: EHCI orion driver
[    5.137547] orion-ehci f1050000.usb: EHCI Host Controller
[    5.143025] orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1
[    5.150738] orion-ehci f1050000.usb: irq 26, io mem 0xf1050000
[    5.172418] orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00
[    5.178499] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.185334] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.192599] usb usb1: Product: EHCI Host Controller
[    5.197500] usb usb1: Manufacturer: Linux 4.6.6 ehci_hcd
[    5.202845] usb usb1: SerialNumber: f1050000.usb
[    5.207982] hub 1-0:1.0: USB hub found
[    5.211777] hub 1-0:1.0: 1 port detected
[    5.228980] usbcore: registered new interface driver usb-storage
[    5.246028] usbcore: registered new interface driver usblp
[    5.276674] Loading iSCSI transport class v2.0-870.
[    5.285982] iscsi: registered transport (tcp)
[    5.596533] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[    5.982695] EXT4-fs (sda5): warning: checktime reached, running e2fsck is recommended
[    6.014761] EXT4-fs (sda5): recovery complete
[    6.052469] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    6.127560] random: mkswap urandom read with 85 bits of entropy available
[    6.195869] Adding 524284k swap on /dev/sda3.  Priority:-1 extents:1 across:524284k
[   12.142469] random: nonblocking pool is initialized
[   17.995432] udevd (316): /proc/316/oom_adj is deprecated, please use /proc/316/oom_score_adj instead.
[   18.004817] udev: starting version 130
[   18.658964] xhci_hcd 0000:01:00.0: xHCI Host Controller
[   18.664284] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[   18.732165] xhci_hcd 0000:01:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
[   19.088948] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   19.095817] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   19.103083] usb usb2: Product: xHCI Host Controller
[   19.107986] usb usb2: Manufacturer: Linux 4.6.6 xhci-hcd
[   19.113331] usb usb2: SerialNumber: 0000:01:00.0
[   19.119180] hub 2-0:1.0: USB hub found
[   19.123488] hub 2-0:1.0: 2 ports detected
[   19.127985] xhci_hcd 0000:01:00.0: xHCI Host Controller
[   19.133277] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
[   19.140806] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[   19.149040] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[   19.155873] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   19.163138] usb usb3: Product: xHCI Host Controller
[   19.168040] usb usb3: Manufacturer: Linux 4.6.6 xhci-hcd
[   19.173389] usb usb3: SerialNumber: 0000:01:00.0
[   19.179151] hub 3-0:1.0: USB hub found
[   19.183460] hub 3-0:1.0: 2 ports detected
[   26.558418] EXT4-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended
[   26.836485] EXT4-fs (sda8): recovery complete
[   26.882483] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr,acl,nodelalloc
[   28.182690] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   32.183232] mvneta f1074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   32.191127] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   36.031767] capability: warning: `proftpd' uses 32-bit capabilities (legacy support in use)
[   38.398798] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[  199.872063] usb 1-1: new high-speed USB device number 2 using orion-ehci
[  200.023069] usb 1-1: New USB device found, idVendor=0781, idProduct=5406
[  200.029813] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  200.037003] usb 1-1: Product: U3 Cruzer Micro
[  200.041382] usb 1-1: Manufacturer: SanDisk
[  200.045507] usb 1-1: SerialNumber: 44567202EE9160BF
[  200.052123] usb-storage 1-1:1.0: USB Mass Storage device detected
[  200.072314] scsi host1: usb-storage 1-1:1.0
[  201.072995] scsi 1:0:0:0: Direct-Access     SanDisk  Cruzer           8.02 PQ: 0 ANSI: 0 CCS
[  201.088149] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[  208.632306] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
[  208.657147] usb 3-1: New USB device found, idVendor=0951, idProduct=1666
[  208.663898] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  208.671068] usb 3-1: Product: DataTraveler 3.0
[  208.675542] usb 3-1: Manufacturer: Kingston
[  208.679746] usb 3-1: SerialNumber: 08606E6D41E2BD61B343029C
[  208.687410] usb-storage 3-1:1.0: USB Mass Storage device detected
[  208.711080] scsi host2: usb-storage 3-1:1.0
[  209.712767] scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[  209.724709] sd 2:0:0:0: [sdc] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB)
[  209.742013] sd 2:0:0:0: [sdc] Write Protect is off
[  209.746844] sd 2:0:0:0: [sdc] Mode Sense: 2b 80 00 08
[  209.752038] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  209.870445]  sdc: sdc1
[  209.878426] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[  210.467697] ntfs: volume version 3.1.
root@ftp:/ #


[Jocko]

It seems you reboot the NAS. Did you restart the nas after editing the file 'insert-modules.nwsp2'

Please to note you use a ntfs USB key on USB2 and then compare rw speed with your other USB3 key with a FAT partition is not significant as with ntfs partition rw speed will be always slower than on a FAT partition

please to post again

Code: Select all

lsmod

[m1m1sm1t1c0]

It seems you reboot the NAS. Did you restart the nas after editing the file 'insert-modules.nwsp2'

Yes

Please to note you use a ntfs USB key on USB2 and then compare rw speed with your other USB3 key with a FAT partition is not significant as with ntfs partition rw speed will be always slower than on a FAT partition

Ok

Code: Select all

lsmod

Code: Select all

login as: root
root@10.113.1.4's password:
Access denied
root@10.113.1.4's password:
root@ftp:/ # lsmod
xhci_pci 3504 0 - Live 0xbf0c3000
xhci_plat_hcd 5796 0 - Live 0xbf0be000
xhci_hcd 90052 2 xhci_pci,xhci_plat_hcd, Live 0xbf0a1000
iscsi_tcp 8140 0 - Live 0xbf09b000
libiscsi_tcp 11292 1 iscsi_tcp, Live 0xbf094000
libiscsi 32107 2 iscsi_tcp,libiscsi_tcp, Live 0xbf085000
scsi_transport_iscsi 56358 2 iscsi_tcp,libiscsi, Live 0xbf06a000
usblp 9262 0 - Live 0xbf063000
usb_storage 38422 0 - Live 0xbf04f000
ehci_orion 2794 0 - Live 0xbf04b000
ehci_hcd 36922 1 ehci_orion, Live 0xbf03c000
usbcore 145666 7 xhci_pci,xhci_plat_hcd,xhci_hcd,usblp,usb_storage,ehci_orion,ehci_hcd, Live 0xbf004000
usb_common 2727 1 usbcore, Live 0xbf000000
root@ftp:/ #


[Jocko]

It seems USB3 support is now ok on your NAS.

rw speed on an USB3 should be around 10 times faster than an USB2 if the cpu is enough powerful