by whitnalj » Fri Sep 14, 2018 10:52 pm
hello again,
I have replaced the drive in bay 1 and have made progress beyond the formatting error.
I now get an error relating to the firmware image as per below
format partition 5
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
Stride=0 blocks, Stripe width=0 blocks
32128 inodes, 128456 blocks
1284 blocks (1.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67371008
16 block groups
8192 blocks per group, 8192 fragments per group
2008 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 36 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
formatting sda5 succeeded
writing kernel to partition 6
mkdir: can't create directory 'sda5': File exists
mounting sda 5 succeeded
getting kernel from tftp server
writing kernel to partition 6
3996+1 records in
3996+1 records out
2046104 bytes (2.0MB) copied, 0.634204 seconds, 3.1MB/s
writing kernel to partition 6 succeeded
Getting firmware image from tftp server
firmware disk image uploaded succesfully\n
Unpacking firmware image from archive
firmware disk image extracted succesfully\n
Adapting firmware image for 5big1\n
Transfer of firmware correction from tfp server succeeded, starting pacthing of firmware image
mkdir: can't create directory '/fvdw-sl': File exists
mounting firmware image succeeded
./
./etc/
tar: can't make dir ./etc: Input/output error
./etc/init.d/
tar: can't create directory './etc': Input/output error
tar: can't make dir ./etc/init.d: Input/output error
./etc/init.d/insert-modules
tar: can't create directory './etc/': Input/output error
tar: can't remove old file ./etc/: Input/output error
correcting firmware image for 5big1 failed
root@(none):/ #
root@(none):/ #