Disks's leds are blinking in blue colour

[Basajaun]

Hi,

on our second 5Big vs1 disks's leds are blinking in blue color.

When i try to execute any command, it's status: Current System Status: execution command, please wait …

Thanks in advance !

Best regards

[fvdw]

What was the last command that you gave?

In other words, do you know which command it is executing

[Basajaun]

Hi fvdw,

yes, the last command was

Power LED Off on Setup / Other settings

Thanks in advance !

Best rgards,

[fvdw]

That sould not make the webinterface non responsive. I advice to perform a reboot. If you can connect via ssh give on the commandline the command

Code: Select all

reboot

If thats not possible cut power and connect power again.

[Basajaun]

Hi,

why the disks's leds are blinking at the same time ?

Thanks in advance !

Best regards,

[fvdw]

Do you a raid array active?

[Jocko]

Yes he should have a raid. So blue Led blinking means a resync state. You can see it with the main disk setup or with the command

Code: Select all

cat /proc/mdstat

[Basajaun]

Hi jocko,

here you are

Code: Select all

root@Ortzi:/ # cat /proc/mdstat
Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sda8[0] sde8[4] sdd8[3] sdc8[2] sdb8[1]
      7800905728 blocks super 1.0 level 5, 512k chunk, algorithm 2 [5/5] [UUUUU]
      bitmap: 0/15 pages [0KB], 65536KB chunk

unused devices: <none>


Thanks in advance !

Best regards

[Basajaun]

Hi Jocko, fvdw,

we have two nas 5Big vs1 (Osiris and Ortzi). Ortzi have all disks's leds blinking blue at the same time. On Osiris all is ok.

i've uploaded four images, two (Osiris) and two (Ortzi)

[Jocko]

Hi basajaun

You have this issue as you do not have the expected output with mdstat output (bitmap line).

Next week we go to deepen it (when I will be at home)