plugout.net

by **panda88** » Thu Jan 04, 2018 8:02 am

fvdw wrote:About 4.2.3.
No ouput of fdisk. As the sata driver is loaded according dmesg output I suspect that the hdd are not powered up, meaning a gpio value is not correct. Do they spin up when the kernel is booting?

To check if sata interface is working you could start uboot console (part of fvdw-sl console) and give on the marvell prompt the command
Code: Select all
ide reset

The output of ls -al /dev/sd* doesn't mean a disk is found. It are predefined mountpoints in the root file system included in this kernel.

Yes they spins and are solid blue. Though, I can make the further command you wrote me just tonight, when il be back home. Now I’m on my desk at work :(

by **Jocko** » Thu Jan 04, 2018 8:30 am

@panda
Please to do what fvdw asked

Code: Select all: ide reset

@fvdw
I noted a strange line on dmesg output

Code: Select all: [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f

which should be 88f6282
Do you use the right branch for this cpu ?

by **fvdw** » Thu Jan 04, 2018 8:59 am

@Jocko

its normal output, on nwsp2 classic (6281) you will find it as well

Code: Select all: root@fvdw-sta423:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.2.3 (root@fvdwsl-5big2.local) (gcc version 4.5.4 (GCC) ) #32 PREEMPT Wed Dec 27 14:26:34 CET 2017 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine model: LaCie Network Space v2 [ 0.000000] Memory policy: Data cache writeback

88f6282 is used by marvell/lacie to identify the board
https://wikidevi.com/wiki/Marvell
88FR131 is the core of the processor (Feroceon ARMv5)
The main difference wit 6281 is that this one runs at higher clock speed and has 2x PCIe instead of 1

by **fvdw** » Thu Jan 04, 2018 9:05 am

for info
dmesg 2bignas (kernel 4.2.3)

Code: Select all: root@fvdw-sta423:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.2.3 (root@fvdwsl-5big2.local) (gcc version 4.5.4 (GCC) ) #32 PREEMPT Wed Dec 27 14:26:34 CET 2017 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine model: LaCie 2Big NAS [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c09b4974, node_mem_map cfdfa000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 netconsole=6666@10.0.0.252/,6666@10.0.0.108/ cap=gpt,lba64 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 249496K/262144K available (6163K kernel code, 199K rwdata, 1612K rodata, 1932K init, 367K bss, 12648K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc07a0188 (7777 kB) [ 0.000000] .init : 0xc07a1000 - 0xc0984000 (1932 kB) [ 0.000000] .data : 0xc0984000 - 0xc09b5e20 ( 200 kB) [ 0.000000] .bss : 0xc09b5e20 - 0xc0a11bbc ( 368 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000006] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.000111] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896) [ 0.060053] pid_max: default: 32768 minimum: 301 [ 0.060154] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.060170] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.060613] CPU: Testing write buffer coherency: ok [ 0.060887] Setting up static identity map for 0x81e0 - 0x8238 [ 0.061081] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1 [ 0.064755] VFP support v0.3: not present [ 0.065022] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.065109] xor: measuring software checksum speed [ 0.160059] arm4regs : 1819.600 MB/sec [ 0.260044] 8regs : 1091.600 MB/sec [ 0.360040] 32regs : 1511.600 MB/sec [ 0.360052] xor: using function: arm4regs (1819.600 MB/sec)

nwsp2 (4.2.3 kernel)

Code: Select all: root@fvdw-sta423:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.2.3 (root@fvdwsl-5big2.local) (gcc version 4.5.4 (GCC) ) #32 PREEMPT Wed Dec 27 14:26:34 CET 2017 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine model: LaCie Network Space v2 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c09b4974, node_mem_map cfdfa000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.1.252/,6666@192.168.1.111/ [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 249500K/262144K available (6163K kernel code, 199K rwdata, 1612K rodata, 1932K init, 367K bss, 12644K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc07a0188 (7777 kB) [ 0.000000] .init : 0xc07a1000 - 0xc0984000 (1932 kB) [ 0.000000] .data : 0xc0984000 - 0xc09b5e20 ( 200 kB) [ 0.000000] .bss : 0xc09b5e20 - 0xc0a11bbc ( 368 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000013] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000236] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216) [ 0.090118] pid_max: default: 32768 minimum: 301 [ 0.090324] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090353] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.091233] CPU: Testing write buffer coherency: ok [ 0.091748] Setting up static identity map for 0x81e0 - 0x8238 [ 0.092153] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.099328] VFP support v0.3: not present [ 0.099901] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.100143] xor: measuring software checksum speed [ 0.200083] arm4regs : 726.800 MB/sec [ 0.300083] 8regs : 436.000 MB/sec [ 0.400085] 32regs : 603.600 MB/sec [ 0.400108] xor: using function: arm4regs (726.800 MB/sec) [ 0.400173] pinctrl core: initialized pinctrl subsystem

Notice the difference in clock speed, need to check if I have set that properly in 3.14.2 standalone kernel

by **fvdw** » Thu Jan 04, 2018 9:39 am

@panda88

please try to load the 3.14.2 standalone kernel using uboot console, give these commands at marvell>> prompt

I assume the UIMAGE-3142-KIRKWOOD-159-standalone kernel is present in the tftp directory of the fvdw-sl console
Switch off the nas, start fvdw-sl console and choose as action,
start tftp server
after that choose as action
u-boot console

Start the nas and wait until u-boot console interrupts the boot and the marvell>> prompt appears

in the u-boot console window give these commands

Code: Select all: setenv bootargs console=ttyS0,115200 netconsole=6666@${ipaddr}/,6666@${serverip}/

use the commands exactly as they are given so do not replace the parameters ipaddr and serverip leave them as they are in this command
PS the u-boot console window has a paste option (right click on title bar)
check if now bootargs parameter is set to this string

Code: Select all: printenv bootargs

proceed

Code: Select all: ide reset tftpboot 0x800000 UIMAGE-3142-KIRKWOOD-159-standalone

Code: Select all: bootm

You should see in the u-boot window that the kernel is uploaded and loaded

If the kernel loads it should show you after mention starting kernel detailed output of kernel loading in the u-boot console window. If the kernel fails before netconsole is activated in the kernel then there will be no output

by **fvdw** » Thu Jan 04, 2018 4:17 pm

another standalone kernel #160 for testing
best to test it in u-boot console

Code: Select all: setenv bootargs console=ttyS0,115200 netconsole=6666@${ipaddr}/,6666@${serverip}/ ide reset tftpboot 0x800000 UIMAGE-3142-KIRKWOOD-160-standalone bootm

If the kernel output comes and is ok you should be able to login with telnet

by **fvdw** » Thu Jan 04, 2018 9:40 pm

and a third standalone kernel #161, this one enables specifically the pcie ports on the nas2big
please do same tests :mrgreen:
best to test it in u-boot console

Code: Select all: setenv bootargs console=ttyS0,115200 netconsole=6666@${ipaddr}/,6666@${serverip}/ ide reset tftpboot 0x800000 UIMAGE-3142-KIRKWOOD-161-standalone bootm

If the kernel output comes and is ok you should be able to login with telnet

by **panda88** » Thu Jan 04, 2018 10:33 pm

lets answer in order.
first: ide reset; that's the output

Code: Select all: Marvell>> ide reset ide reset Reset IDE: Marvell Serial ATA Adapter Marvell Serial ATA Adapter Integrated Sata device found PCIe SATA:ffffffff Marvell>>

now I proceed with next tests

by **panda88** » Thu Jan 04, 2018 10:46 pm

fvdw wrote:@panda88

please try to load the 3.14.2 standalone kernel using uboot console, give these commands at marvell>> prompt

I assume the UIMAGE-3142-KIRKWOOD-159-standalone kernel is present in the tftp directory of the fvdw-sl console
Switch off the nas, start fvdw-sl console and choose as action,
start tftp server
after that choose as action
u-boot console

Start the nas and wait until u-boot console interrupts the boot and the marvell>> prompt appears

in the u-boot console window give these commands
Code: Select all
setenv bootargs console=ttyS0,115200 netconsole=6666@${ipaddr}/,6666@${serverip}/

use the commands exactly as they are given so do not replace the parameters ipaddr and serverip leave them as they are in this command
PS the u-boot console window has a paste option (right click on title bar)
check if now bootargs parameter is set to this string
Code: Select all
printenv bootargs

proceed
Code: Select all
ide reset tftpboot 0x800000 UIMAGE-3142-KIRKWOOD-159-standalone

Code: Select all
bootm

You should see in the u-boot window that the kernel is uploaded and loaded

If the kernel loads it should show you after mention starting kernel detailed output of kernel loading in the u-boot console window. If the kernel fails before netconsole is activated in the kernel then there will be no output

here it is

Code: Select all: Marvell>> setenv bootargs console=ttyS0,115200 netconsole=6666@${ipaddr}/,6666@${serverip}/ setenv bootargs console=ttyS0,115200 netconsole=6666@${ipaddr}/,6666@${serverip}/ Marvell>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 netconsole=6666@10.0.0.252/,6666@10.0.0.108/ Marvell>> ide reset ide reset Reset IDE: Marvell Serial ATA Adapter Marvell Serial ATA Adapter Integrated Sata device found PCIe SATA:ffffffff Marvell>> tftpboot 0x800000 UIMAGE-3142-KIRKWOOD-159-standalone tftpboot 0x800000 UIMAGE-3142-KIRKWOOD-159-standalone Using egiga0 device TFTP from server 10.0.0.108; our IP address is 10.0.0.252 Filename 'UIMAGE-3142-KIRKWOOD-159-standalone'. Load address: 0x800000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################### done Bytes transferred = 5876384 (59aaa0 hex) Marvell>> bootm bootm ## Booting image at 00800000 ... Image Name: Linux-3.14.2 Created: 2018-01-03 17:12:04 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5876320 Bytes = 5.6 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK bootargs from environment variables : console=ttyS0,115200 netconsole=6666@10.0.0.252/,6666@10.0.0.108/ cap=gpt,lba64 Starting kernel ...

after that though, no telnet connetion to the nas

by **fvdw** » Thu Jan 04, 2018 10:54 pm

Marvell Serial ATA Adapter
Integrated Sata device found
PCIe SATA:ffffffff

Ah that confirms it needs pcie enabled. Still funny that it doesn't show the diks attached to the sata port
Or was there no disk insde ?

so kernel 159 is useless and probably also 160.
Although kernel 160 might work partially but do not start disk, I also found a failure in Ethernet setup in kernel 159
So ethernet interface is not working and as result no communication via netconsole possible. Ik kernel 160 the ethernet interface is changed. In kernel 161 enable pcie is added.
Hopefully kernel #161 will do the magic :-D

ps on a networkspace v2 you get this as output.

Code: Select all: Marvell>> ide reset ide reset Reset IDE: Marvell Serial ATA Adapter Integrated Sata device found [0 0 0]: Enable DMA mode Device 0 @ 0 0: Model: ST340014AS Firm: 3.40 Ser#: 3MQ02VTB Type: Hard Disk Supports 48-bit addressing Capacity: 38166.6 MB = 37.2 GB (78165360 x 512) Marvell>> ide partinfo ide partinfo ## Testing for valid DOS partition ## Partition Map for IDE device 0 -- Partition Type: DOS Partition Start Sector Num Sectors Type 1 128520 1028160 83 2 1156680 1028160 83 3 2184840 1028160 82 4 3213000 74927160 5 Extd 5 3341520 1670760 83 6 5140800 128520 83 7 5397840 1028160 83 8 6554520 71585640 83 Marvell>>

plugout.net

2big NAS

Re: 2big NAS

Re: 2big NAS

Re: 2big NAS

Re: 2big NAS

Re: 2big NAS

Re: 2big NAS

Re: 2big NAS

Re: 2big NAS

Re: 2big NAS

Re: 2big NAS

Who is online