I LOST MY NAS!!! and all of it's data... Oh well

[Jocko]

Please to post these outputs!

Code: Select all

dmesg
mount
cat /boot.log

[raidsm]

Hi jock here are the results: I thought it wasn't necessary anymore... ;) my bad

Code: Select all

root@NS2:/ # dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.6.6 (root@fvdwsl-5big2.local) (gcc version 4.9.3 (GCC) ) #4 PREEMPT Sun Dec 11 17:46:35 CET 2016
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005317f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: LaCie Network Space v2
[    0.000000] Ignoring unrecognised tag 0x41000403
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat c095213c, node_mem_map cfdfa000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro reset=0 productType=ASTON_KW GPT fvdw vs80
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 249908K/262144K available (7075K kernel code, 301K rwdata, 1936K rodata, 200K init, 395K bss, 12236K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08d503c   (9013 kB)
[    0.000000]       .init : 0xc08d6000 - 0xc0908000   ( 200 kB)
[    0.000000]       .data : 0xc0908000 - 0xc0953620   ( 302 kB)
[    0.000000]        .bss : 0xc0953620 - 0xc09b64c4   ( 396 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]    Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:114
[    0.000000] Switching to timer-based delay loop, resolution 6ns
[    0.000013] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
[    7.382192] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
[    7.382628] Console: colour dummy device 80x30
[    7.382673] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666)
[    7.382704] pid_max: default: 32768 minimum: 301
[    7.382927] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    7.382958] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    7.383889] CPU: Testing write buffer coherency: ok
[    7.384487] Setting up static identity map for 0x81e0 - 0x8238
[    7.389676] VFP support v0.3: not present
[    7.390422] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    7.390637] xor: measuring software checksum speed
[    7.482617]    arm4regs  :   725.200 MB/sec
[    7.582308]    8regs     :   435.600 MB/sec
[    7.682306]    32regs    :   602.800 MB/sec
[    7.682334] xor: using function: arm4regs (725.200 MB/sec)
[    7.682400] pinctrl core: initialized pinctrl subsystem
[    7.685063] NET: Registered protocol family 16
[    7.686004] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    7.691294] Kirkwood: MV88F6281-A1, TCLK=166666667.
[    7.691341] Feroceon L2: Enabling L2
[    7.691395] Feroceon L2: Cache support initialised.
[    7.693691] kirkwood_init: create proc tsinfo proc
[    7.693726] tsinfo: create proc tsinfo vendor successfully
[    7.693738] mv_usb_init 1
[    7.693754] mv_usb_init 2 devnum = 0
[    7.693770] init function mv_usb_init finished
[    7.693782] initial MPP regs: 01112222 00003311 00551100 00000000 00000000 00000000 00000000
[    7.693829]   final MPP regs: 01112222 00003311 00551100 00000000 00000000 00000000 00000000
[    7.694081]  orion-ehci registered
[    7.923007] raid6: int32x1  gen()    76 MB/s
[    8.092905] raid6: int32x1  xor()    44 MB/s
[    8.262843] raid6: int32x2  gen()    96 MB/s
[    8.432322] raid6: int32x2  xor()    59 MB/s
[    8.602369] raid6: int32x4  gen()    91 MB/s
[    8.772323] raid6: int32x4  xor()    61 MB/s
[    8.942554] raid6: int32x8  gen()    82 MB/s
[    9.112270] raid6: int32x8  xor()    54 MB/s
[    9.112284] raid6: using algorithm int32x2 gen() 96 MB/s
[    9.112295] raid6: .... xor() 59 MB/s, rmw enabled
[    9.112306] raid6: using intx1 recovery algorithm
[    9.113053] vgaarb: loaded
[    9.113745] SCSI subsystem initialized
[    9.114550] libata version 3.00 loaded.
[    9.115333] usbcore: registered new interface driver usbfs
[    9.115510] usbcore: registered new interface driver hub
[    9.115679] usbcore: registered new device driver usb
[    9.116069] Linux video capture interface: v2.00
[    9.121677] clocksource: Switched to clocksource orion_clocksource
[    9.121917] VFS: Disk quotas dquot_6.6.0
[    9.121997] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    9.145851] NET: Registered protocol family 2
[    9.147199] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    9.147257] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    9.147303] TCP: Hash tables configured (established 2048 bind 2048)
[    9.147402] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    9.147436] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    9.147715] NET: Registered protocol family 1
[    9.148100] RPC: Registered named UNIX socket transport module.
[    9.148117] RPC: Registered udp transport module.
[    9.148127] RPC: Registered tcp transport module.
[    9.148138] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    9.148175] PCI: CLS 0 bytes, default 32
[    9.148633] NetWinder Floating Point Emulator V0.97 (double precision)
[    9.148885] gpio-usb-probe-4b err=0
[    9.148908] gpio-usb gpio-usb: USB GPIO's initialized
[    9.150689] futex hash table entries: 256 (order: -1, 3072 bytes)
[    9.151318] workingset: timestamp_bits=29 max_order=16 bucket_order=0
[    9.153193] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    9.153674] ntfs: driver 2.1.32 [Flags: R/W].
[    9.153750] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    9.154007] fuse init (API version 7.24)
[    9.154721] JFS: nTxBlock = 1952, nTxLock = 15619
[    9.156033] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    9.162126] async_tx: api initialized (async)
[    9.162454] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    9.162486] io scheduler noop registered
[    9.162508] io scheduler deadline registered
[    9.162557] io scheduler cfq registered (default)
[    9.162897] mv_xor mv_xor.0: Marvell shared XOR driver
[    9.203245] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy )
[    9.206025] mv_xor mv_xor.1: Marvell shared XOR driver
[    9.243246] mv_xor mv_xor.1: Marvell XOR (Registers Mode): ( xor cpy )
[    9.254631] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    9.257282] console [ttyS0] disabled
[    9.277607] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[    9.878482] console [ttyS0] enabled
[    9.904520] brd: module loaded
[    9.919093] loop: module loaded
[    9.923594] sata_mv sata_mv.0: version 1.28
[    9.923707] sata_mv sata_mv.0: cannot get optional clkdev
[    9.929216] sata_mv sata_mv.0: slots 32 ports 2
[    9.939336] scsi host0: sata_mv
[    9.943557] scsi host1: sata_mv
[    9.947270] ata1: SATA max UDMA/133 irq 21
[    9.951356] ata2: SATA max UDMA/133 irq 21
[    9.958147] m25p80 spi0.0: mx25l4005a (512 Kbytes)
[    9.964364] Creating 2 MTD partitions on "spi_flash":
[    9.969413] 0x000000000000-0x00000007d000 : "u-boot"
[    9.976361] 0x00000007e000-0x00000007f000 : "u-boot-env"
[    9.985581] tun: Universal TUN/TAP device driver, 1.6
[    9.990623] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    9.998214] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   10.006968] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   10.023534] libphy: orion_mdio_bus: probed
[   10.027836] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   10.562282] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   10.602323] ata1.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[   10.608311] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   10.652327] ata1.00: configured for UDMA/133
[   10.682648] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD103SI  1118 PQ: 0 ANSI: 5
[   10.742912] fvdw1 disk index before get_sd_name = 0
[   10.747771] No LaCie disk map available
[   10.751588] fvdw2 disk index after get_sd_name = 0
[   10.772283] fvdw3 prefix[0]=s  prefix[1]=d
[   10.776370] fvdw4 diskname = sda
[   10.792523] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[   10.801326] sd 0:0:0:0: [sda] Write Protect is off
[   10.812287] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   10.812451] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.045216]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[   11.064534] sd 0:0:0:0: [sda] Attached SCSI disk
[   11.122290] ata2: SATA link down (SStatus 0 SControl F300)
[   11.208814] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:8b:8d:c9
[   11.217834] PPP generic driver version 2.4.2
[   11.222638] PPP Deflate Compression module registered
[   11.227698] PPP MPPE Compression module registered
[   11.232601] NET: Registered protocol family 24
[   11.237073] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[   11.244729] usbcore: registered new interface driver pegasus
[   11.250685] usbcore: registered new interface driver asix
[   11.256291] usbcore: registered new interface driver ax88179_178a
[   11.262640] usbcore: registered new interface driver cdc_ether
[   11.268745] usbcore: registered new interface driver net1080
[   11.274635] usbcore: registered new interface driver plusb
[   11.280379] usbcore: registered new interface driver cdc_subset
[   11.286531] usbcore: registered new interface driver zaurus
[   11.292461] usbcore: registered new interface driver ipheth
[   11.298207] usbcore: registered new interface driver cdc_ncm
[   11.305160] aoe: cannot create debugfs directory
[   11.310307] aoe: AoE v85 initialised.
[   11.315011] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[   11.321406] i2c /dev entries driver
[   11.326700] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[   11.334034] uvcvideo: Unable to create debugfs directory
[   11.339648] usbcore: registered new interface driver uvcvideo
[   11.345436] USB Video Class driver (1.1.1)
[   11.349533] gspca_main: v2.14.0 registered
[   11.353862] usbcore: registered new interface driver Philips webcam
[   11.360951] md: linear personality registered for level -1
[   11.366803] md: raid0 personality registered for level 0
[   11.372106] md: raid1 personality registered for level 1
[   11.377499] md: raid10 personality registered for level 10
[   11.383418] md: raid6 personality registered for level 6
[   11.388713] md: raid5 personality registered for level 5
[   11.394136] md: raid4 personality registered for level 4
[   11.399773] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[   11.408645] device-mapper: multipath: version 1.11.0 loaded
[   11.414274] device-mapper: multipath round-robin: version 1.1.0 loaded
[   11.420785] device-mapper: multipath queue-length: version 0.2.0 loaded
[   11.427431] device-mapper: multipath service-time: version 0.3.0 loaded
[   11.434158] device-mapper: dm-log-userspace: version 1.3.0 loaded
[   11.440235] device-mapper: raid: Loading target version 1.7.0
[   11.448096] Netfilter messages via NETLINK v0.30.
[   11.453561] nfnl_acct: registering with nfnetlink.
[   11.458384] nf_conntrack version 0.5.0 (3904 buckets, 15616 max)
[   11.465443] ipip: IPv4 over IPv4 tunneling driver
[   11.471640] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.477429] NET: Registered protocol family 10
[   11.483579] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.489198] sit: IPv6 over IPv4 tunneling driver
[   11.495219] NET: Registered protocol family 17
[   11.499717] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   11.512538] Bridge firewalling registered
[   11.516741] NET: Registered protocol family 5
[   11.521322] sctp: Hash tables configured (bind 1024/1024)
[   11.528833] console [netcon0] enabled
[   11.532770] netconsole: network logging started
[   11.537952] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   11.545310] rtc-mv rtc-mv: setting system clock to 2016-12-18 15:24:41 UTC (1482074681)
[   11.554037] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[   11.619827] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem
[   11.627594] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
[   11.634507] EXT4-fs (sda7): write access will be enabled during recovery
[   13.412961] EXT4-fs (sda7): recovery complete
[   13.472348] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   13.480024] VFS: Mounted root (ext3 filesystem) readonly on device 8:7.
[   13.487495] Freeing unused kernel memory: 200K (c08d6000 - c0908000)
[   13.493839] This architecture does not have kernel memory protection.
[   13.850333] EXT4-fs (sda7): warning: mounting fs with errors, running e2fsck is recommended
[   13.892383] EXT4-fs (sda7): re-mounted. Opts: (null)
[   14.618091] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[   14.852483] EXT4-fs warning (device sda5): ext4_clear_journal_err:4450: Filesystem error recorded from previous mount: IO failure
[   14.864135] EXT4-fs warning (device sda5): ext4_clear_journal_err:4451: Marking fs in need of filesystem check.
[   14.932565] EXT4-fs (sda5): warning: mounting fs with errors, running e2fsck is recommended
[   14.972683] EXT4-fs (sda5): recovery complete
[   15.002352] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   15.110739] random: mkswap urandom read with 84 bits of entropy available
[   15.167907] Adding 524284k swap on /dev/sda3.  Priority:-1 extents:1 across:524284k
[   15.794541] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   15.802133] ehci-orion: EHCI orion driver
[   15.806464] orion-ehci orion-ehci.0: EHCI Host Controller
[   15.811892] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[   15.819757] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[   15.842269] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[   15.848376] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   15.855164] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   15.862381] usb usb1: Product: EHCI Host Controller
[   15.867244] usb usb1: Manufacturer: Linux 4.6.6 ehci_hcd
[   15.872556] usb usb1: SerialNumber: orion-ehci.0
[   15.878046] hub 1-0:1.0: USB hub found
[   15.881822] hub 1-0:1.0: 1 port detected
[   15.907442] usbcore: registered new interface driver usb-storage
[   15.930856] usbcore: registered new interface driver usblp
[   15.976235] Loading iSCSI transport class v2.0-870.
[   15.989109] iscsi: registered transport (tcp)
[   19.522505] random: nonblocking pool is initialized
[   27.872233] udevd (914): /proc/914/oom_adj is deprecated, please use /proc/914/oom_score_adj instead.
[   27.881635] udev: starting version 130
[   36.640346] EXT4-fs (sda8): mounting ext3 file system using the ext4 subsystem
[   42.728844] EXT4-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended
[   42.825980] EXT4-fs (sda8): recovery complete
[   42.902464] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr,acl
[   45.484054] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[   45.490203] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   48.669336] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[   48.679212] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  313.862320] EXT4-fs (sda7): error count since last fsck: 12
[  313.867888] EXT4-fs (sda7): initial error at time 1481940460: ext4_journal_check_start:56
[  313.876058] EXT4-fs (sda7): last error at time 1482072625: ext4_journal_check_start:56
[  315.142321] EXT4-fs (sda5): error count since last fsck: 24
[  315.147875] EXT4-fs (sda5): initial error at time 1481982944: ext4_journal_check_start:56
[  315.156038] EXT4-fs (sda5): last error at time 1482074341: ext4_journal_check_start:56
root@NS2:/ #

Code: Select all

root@NS2:/ # mount
/dev/root on / type ext3 (rw,relatime,data=ordered)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
none on /dev/pts type devpts (rw,relatime,mode=600)
/dev/sda5 on /rw_fs type ext3 (rw,noatime,data=ordered)
tmpfs on /rw_fs/tmp/usr/var type tmpfs (rw,relatime,size=5000k)
nfsd on /proc/fs/nfsd type nfsd (rw,relatime)
/dev/sda8 on /share/1000 type ext3 (rw,relatime,data=ordered)


Code: Select all

root@NS2:/ # cat /boot.log
start boot log
detect and set platform
nwsp2
UIMAGE-3142-NWSP2CL-14
Current kernel: 4.6.6 #4 PREEMPT Sun Dec 11 17:46:35 CET 2016
nwsp2
 mount dev/pts
update dev nodes
booting using  root file system...
make dev node for buttons...
make dev node for tun device...
enable IP forwarding...
start buttons control daemon
device = nwsp2
source = buttons-nwsp2
buttons-nwsp2 daemon started
Sun Dec 18 10:24:44 EST 2016
create temporary passwd file
run udevstart to update dev nodes when necessary
inserting kernel modules:
modprobe: module 'iscsi_trgt' not found
create temporary group file
configure loopback network interface
setting reboot and standby
nwsp2
rebootd-nwsp2
nwsp2
standbyd-nwsp2
starting php based setup routines step 1

 * Starting udevd...                 [ OK ]
 * Found XML database configuration file...    [ OK ]
 * Finishing restore RAID devices...     [ OK ]
 * Updating Disks database...           [ OK ]
 * Starting mount of volumes...
   - Mounting volume Default:  [ OK ]
 * Finishing mount of volumes...        [ OK ]
 * Generating Hosts File...           [ OK ]
 * Configuring System Hostname...        [ OK ] 
 * Configuring LAN interface...        [ OK ]
 * Initializing Timezone...           [ OK ]
 * Starting web server...
   Configure WebDav service :           [ OK ]
   Web server :                     [ OK ]
 * Starting mount of internal USB ...
 * Finishing mount internal USB ...     [ OK ]
 * Configuring Disks...              [ OK ]
 * Configuring Samba...                [ OK ]
 * Configuring System Users...
   Root password: use custom password
   Set users, linux and samba accounts    [ OK ]
 * Starting Fvdw-sl Discovery Daemon...    [ OK ]
start rpcbind service
starting php based setup routines step 2
 * Starting dropbear...              [ OK ]
 * Kill temporary dropbear...          [ OK ]
starting php based setup routines step 3
 * Starting Explorer Service...        [ OK ]
 * Starting daemon update Hosts File...  [ OK ]
 * Starting USB Spin-down Guard...        [ OK ]
 * Starting Disk Temperature Guard...     [ OK ]
 * Starting mount of remote shares...
 * Finishing mount shares...           [ OK ]
 * Starting AFP Service...              [ OK ]
 * Starting NTP client...              [ OK ]
 * Starting CRON Service...           [ OK ]
 * Starting Transmission Client...        [ OK ]
starting php based setup routines step banner


*** fvdw-sl NAS firmware
    This is fvdw-sl version: fvdw-sl 16.1
    built on: Oct 01 2015

    LAN IP address: 10.0.1.10 (DHCP)

    Port configuration:

    LAN   -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
LED settings
else loop1 finished
rcS finished
root@NS2:/ #


[Jocko]

:dry

So you have some issues on sda5 (which contains the NAS database) and sda7 (the firmware)

Code: Select all

[   13.850333] EXT4-fs (sda7): warning: mounting fs with errors, running e2fsck is recommended
[   13.892383] EXT4-fs (sda7): re-mounted. Opts: (null)
[   14.618091] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[   14.852483] EXT4-fs warning (device sda5): ext4_clear_journal_err:4450: Filesystem error recorded from previous mount: IO failure
[   14.864135] EXT4-fs warning (device sda5): ext4_clear_journal_err:4451: Marking fs in need of filesystem check.
[   14.932565] EXT4-fs (sda5): warning: mounting fs with errors, running e2fsck is recommended
[   14.972683] EXT4-fs (sda5): recovery complete
[   15.002352] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
...
[  313.862320] EXT4-fs (sda7): error count since last fsck: 12
[  313.867888] EXT4-fs (sda7): initial error at time 1481940460: ext4_journal_check_start:56
[  313.876058] EXT4-fs (sda7): last error at time 1482072625: ext4_journal_check_start:56
[  315.142321] EXT4-fs (sda5): error count since last fsck: 24
[  315.147875] EXT4-fs (sda5): initial error at time 1481982944: ext4_journal_check_start:56
[  315.156038] EXT4-fs (sda5): last error at time 1482074341: ext4_journal_check_start:56

As these partitions are mounted and used by fvdw-sl you can not make fsck via ssh access. You will need to use fvdw-sl console.

But even if you may repair fs on these partitions, that would also mean you have a pre-fail disk.

Can you post a screen capture of the SMART menu (view attributes status)

[raidsm]

I know I had some bad block on the drive... Is it possible that something when wrong with the firmware or it's pointing more toward a bad drive?

Now I'm copying some files but I got a backup of all the stuff other than some things related to this nas wich aren't important (ie: a test Wordpress website)

edit: I note that when I put this drive on another NAS (2-3 weeks ago) unit it does had SMART error on some bad blocks....





smartctl 6.3 2014-07-26 r3976 [armv5tel-linux-4.6.6] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, http://www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED


SMART Attributes Status
Id Attribute Name Flag Value Worst value Threshold Type Status Raw data
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Ok 39
3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Ok 8160
4 Start_Stop_Count 0x0032 085 085 000 Old_age Ok 14990
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Ok 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Ok 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Ok 10510
9 Power_On_Hours 0x0032 098 098 000 Old_age Ok 12197
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Ok 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Ok 3
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Ok 1936
13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Ok 39
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Ok 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Ok 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Ok 39
188 Command_Timeout 0x0032 100 100 000 Old_age Ok 0
190 Airflow_Temperature_Cel 0x0022 068 045 000 Old_age Ok 32 (Min/Max 31/32)
194 Temperature_Celsius 0x0022 066 042 000 Old_age Ok 34 (1 47 34 31 0)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Ok 1721065
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Ok 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Ok 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Ok 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Ok 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Ok 0
201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Ok 0





smartctl 6.3 2014-07-26 r3976 [armv5tel-linux-4.6.6] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, http://www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F2 EG
Device Model: SAMSUNG HD103SI
Serial Number: S1VSJ90Z438145
LU WWN Device Id: 5 0024e9 202451f8d
Firmware Version: 1AG01118
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Sun Dec 18 10:46:09 2016 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (12949) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 217) minutes.
Conveyance self-test routine
recommended polling time: ( 23) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 39
3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 8160
4 Start_Stop_Count 0x0032 085 085 000 Old_age Always - 14990
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 10510
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 12197
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 3
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 1936
13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 39
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 39
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 068 045 000 Old_age Always - 32 (Min/Max 31/32)
194 Temperature_Celsius 0x0022 066 042 000 Old_age Always - 34 (1 47 34 31 0)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 2311639
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 12106 -
# 2 Short offline Completed without error 00% 11964 -
# 3 Short offline Completed without error 00% 11944 -
# 4 Extended offline Aborted by host 80% 11944 -
# 5 Short offline Completed without error 00% 11010 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[Jocko]

know I had some bad block on the drive...

according with SMART output is not sure...

5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Ok 0

(=> no reallocated sector)
Anyhow use fvdw-sl console and on a telnet window do

Code: Select all

fsck -y /dev/sda7
fsck -y /dev/sda5

After rebooting check if this attribute value has changed.

[raidsm]

Yeah I know it's funny how my AS3102T NAS report this hard drive' as a failure (I was surprised) and the smart information on NS2 reports it as OK....

anyway , I'm copying some files right now , mostly movies , remaining time approx is 1H30 min so I'll reboot after this just to be sure I don't lose it again ;)

I will run a fsck for sure after I finish copying some file and let you know. Thanks again jocko!. ;)

BTW where are you and what time is it where you live?

I am in Montreal Quebec Canada , and right now it's 11 AM...

[Jocko]

Ok.

I am in Orleans (France) and currently it is 5 PM (so a 6 hours offset)

[raidsm]

BTW it rebooted fine...

I then rebooted in a standalone kernel and:

Code: Select all

root@fvdw-sta-kirkwood:/ # fsck -y /dev/sda7
fsck (busybox 1.21.0, 2013-02-04 10:48:06 GMT+1)
fsck: can't read '/etc/fstab': No such file or directory
fsck: fsck.auto: No such file or directory


Do I need to mount the partition first?

[Jocko]

Indeed the busybox applet fsck does not work and you need to load a static binary.

So do

Code: Select all

 busybox tftp -r e2fsck -l /sbin/e2fsck -g ip-pc
chmod a+x /sbin/e2fsck

(ip-pc is the ip of your laptop;

Then use e2fsck instead of fsck

[raidsm]

et voilà!

is there a way to check all the drive as i'm on it?

indeed I got some errors...

Code: Select all

root@fvdw-sta-kirkwood:/ # e2fsck /dev/sda5
e2fsck 1.41.14 (22-Dec-2010)
/dev/sda5: recovering journal
/dev/sda5 contains a file system with errors, check forced.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information

/dev/sda5: ***** FILE SYSTEM WAS MODIFIED *****
/dev/sda5: 125/49152 files (0.8% non-contiguous), 7510/196608 blocks
root@fvdw-sta-kirkwood:/ # e2fsck /dev/sda7
e2fsck 1.41.14 (22-Dec-2010)
/dev/sda7: recovering journal
/dev/sda7 contains a file system with errors, check forced.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/sda7: 5596/64000 files (0.6% non-contiguous), 50643/64000 blocks
root@fvdw-sta-kirkwood:/ #