fvdw wrote:@grishinThe output of dmesg on your box is different and looks normal with the exception that the ethernet settings seems to be modified is this be purpose? Did you change the setting?
Hm, maybe I had created the problem, but everything worked fine on lacie firmware :dontknow
ethernet setting
flow control rx&tx enabled (further +)
interrupt moderation +
ip checksum offload -
Jumbo Packet 9014 bytes
Large Send Offload v1 (ipv4) +
Large Send Offload v2 (ipv4) +
Large Send Offload v2 (ipv6) +
TCP checksum offload (ipv4) rx&tx +
TCP checksum offload (ipv6) rx&tx +
UDP checksum offload (ipv4) rx&tx +
UDP checksum offload (ipv6) rx&tx +
boot.log
- Code: Select all
start boot log
detect and set platform
2big1
UIMAGE-3142-2BIG1-6
2big1
mount dev/pts
update dev nodes
booting using sda1 root file system...
make dev node for buttons...
make dev node for tun device...
enable IP forwarding...
start buttons control daemon
device = 2big1
source = buttons-nwsp2
buttons-nwsp2 daemon started
Sat Nov 5 23:04:13 YEKT 2016
create temporary passwd file
run udevstart to update dev nodes when necessary
inserting kernel modules:
modprobe: module 'xor.ko' not found
create temporary group file
configure loopback network interface
setting reboot and standby
2big1
rebootd-isp1
2big1
standbyd-isp1
starting php based setup routines step 1
* Found XML database configuration file... [ OK ]
* Starting udevd... [ OK ]
* Finishing restore RAID devices... [ OK ]
* Updating Disks database... [ OK ]
* Starting mount of volumes...
- Mounting volume Vol-A: [ OK ]
- Mounting volume Vol-B: [ OK ]
* Finishing mount of volumes... [ OK ]
* Generating Hosts File... [ OK ]
* Configuring System Hostname... [ OK ]
* Configuring LAN interface... [ OK ]
* Initializing Timezone... [ OK ]
* Starting web server... [ OK ]
* Starting mount of internal USB ...
* Finishing mount internal USB ... [ OK ]
* Configuring Disks... [ OK ]
* Configuring Samba... [ OK ]
* Configuring System Users...
Root password: use default password
Set users, linux and samba accounts [ OK ]
* Starting Fvdw-sl Discovery Daemon... [ OK ]
start rpcbind service
starting php based setup routines step 2
* Starting dropbear... [ OK ]
* Kill temporary dropbear... [ OK ]
starting php based setup routines step 3
* Starting NFS Server... [ OK ]
* Starting daemon update Hosts File... [ OK ]
* Starting Disk Temperature Guard... [ OK ]
* Starting mount of remote shares...
* Finishing mount shares... [ OK ]
* Starting FTP Service... [ FAIL ]
starting php based setup routines step banner
*** fvdw-sl NAS firmware
This is fvdw-sl version: fvdw-sl 16.1 patched
built on: Oct 01 2015
LAN IP address: 192.168.1.3 (static)
Port configuration:
LAN -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
move some smbd en nmbd db files from to prevent samba issue when copying large amounts of files (more then 50 thousand)
LED settings
else loop1 finished
rcS finished
fvdw wrote:And what is exactly the problem you have?
i can't copy file from comp to lacie2big because constant error (on screenshot) with file larger 100 mb. Of course, i have free space on disk.