Lacie Cloudbox 3T quick blinking

[Bigtoto]

Hi,

I access my disk with fvdw-sl console using the standalone kernel.
When I type gpt -l /dev/sda, it return the message : Problem error is 6

Is it possible to do something or my disk is dead ?

Thanks for your help.

[fvdw]

Don't use gpt as command but

Code: Select all

gdisk -l /dev/sda

[Bigtoto]

Hi,

Thank's for your reply.

Here's what I get when I type gdisk -l /dev/sda : Problem opening /dev/sda for reading! Error is 6.

[fvdw]

Post the full output is more helpfull.
What you also can pist is the output of

Code: Select all

dmesg

In that output we can see if the kernel can access the disk. But I am afraud your disk has died

[Bigtoto]

Hi,

I did what you said and here is the result.

root@fvdw-sta-kirkwood:/ # dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.2 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #150 PREEMPT Wed Feb 3 23:57:50 CET 2016
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: familybox
[ 0.000000] Ignoring unrecognised tag 0x41000403
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c0971e20, node_mem_map cfdfb000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65536 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.1.252/,6666@192.168.1.29/ cap=gpt,lba64
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 249952K/262144K available (5904K kernel code, 217K rwdata, 1576K rodata, 1932K init, 232K bss, 12192K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0756418 (7482 kB)
[ 0.000000] .init : 0xc0757000 - 0xc093a0c4 (1933 kB)
[ 0.000000] .data : 0xc093c000 - 0xc0972680 ( 218 kB)
[ 0.000000] .bss : 0xc097268c - 0xc09ac88c ( 233 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:114
[ 0.000011] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
[ 6.710394] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[ 6.800357] pid_max: default: 32768 minimum: 301
[ 6.800503] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 6.800523] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 6.801108] CPU: Testing write buffer coherency: ok
[ 6.801455] Setting up static identity map for 0x59c360 - 0x59c3b8
[ 6.804337] VFP support v0.3: not present
[ 6.804909] xor: measuring software checksum speed
[ 6.900398] arm4regs : 870.400 MB/sec
[ 7.000352] 8regs : 545.600 MB/sec
[ 7.100346] 32regs : 752.800 MB/sec
[ 7.100363] xor: using function: arm4regs (870.400 MB/sec)
[ 7.100379] pinctrl core: initialized pinctrl subsystem
[ 7.100508] NET: Registered protocol family 16
[ 7.100908] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 7.103836] Kirkwood: MV88F6281-A1, TCLK=166666667.
[ 7.103862] Feroceon L2: Enabling L2
[ 7.103900] Feroceon L2: Cache support initialised.
[ 7.105034] familybox, skipping usb init
[ 7.105045] initial MPP regs: 01002222 00003311 00000000 00000000 00000000 00000000 00000000
[ 7.105078] final MPP regs: 01002222 00003311 00000000 00000000 00000000 00000000 00000000
[ 7.131816] bio: create slab <bio-0> at 0
[ 7.301383] raid6: int32x1 86 MB/s
[ 7.470660] raid6: int32x2 110 MB/s
[ 7.640802] raid6: int32x4 104 MB/s
[ 7.810826] raid6: int32x8 109 MB/s
[ 7.810837] raid6: using algorithm int32x2 (110 MB/s)
[ 7.810845] raid6: using intx1 recovery algorithm
[ 7.811760] SCSI subsystem initialized
[ 7.812228] libata version 3.00 loaded.
[ 7.813128] usbcore: registered new interface driver usbfs
[ 7.813311] usbcore: registered new interface driver hub
[ 7.813510] usbcore: registered new device driver usb
[ 7.816134] cfg80211: Calling CRDA to update world regulatory domain
[ 7.816419] Switched to clocksource orion_clocksource
[ 7.818814] NET: Registered protocol family 2
[ 7.819335] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 7.819378] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 7.819411] TCP: Hash tables configured (established 2048 bind 2048)
[ 7.819476] TCP: reno registered
[ 7.819490] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 7.819513] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 7.819713] NET: Registered protocol family 1
[ 7.820008] RPC: Registered named UNIX socket transport module.
[ 7.820019] RPC: Registered udp transport module.
[ 7.820027] RPC: Registered tcp transport module.
[ 7.820035] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.820046] PCI: CLS 0 bytes, default 32
[ 7.988083] NetWinder Floating Point Emulator V0.97 (double precision)
[ 7.989663] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 8.109668] VFS: Disk quotas dquot_6.5.2
[ 8.109722] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 8.110196] NFS: Registering the id_resolver key type
[ 8.110278] Key type id_resolver registered
[ 8.110288] Key type id_legacy registered
[ 8.110334] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 8.110351] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 8.110458] NTFS driver 2.1.30 [Flags: R/W].
[ 8.110495] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 8.110658] fuse init (API version 7.22)
[ 8.111264] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 8.111696] msgmni has been set to 488
[ 8.112872] async_tx: api initialized (async)
[ 8.113075] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 8.113088] io scheduler noop registered
[ 8.113097] io scheduler deadline registered
[ 8.113118] io scheduler cfq registered (default)
[ 8.113509] mv_xor mv_xor.0: Marvell shared XOR driver
[ 8.150449] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 8.190365] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 8.190633] mv_xor mv_xor.1: Marvell shared XOR driver
[ 8.230365] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 8.270364] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 8.276458] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 8.297618] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[ 8.826503] console [ttyS0] enabled
[ 8.839993] brd: module loaded
[ 8.847967] loop: module loaded
[ 8.852892] sata_mv sata_mv.0: version 1.28
[ 8.852942] sata_mv sata_mv.0: cannot get optional clkdev
[ 8.858382] sata_mv sata_mv.0: slots 32 ports 1
[ 8.864985] scsi0 : sata_mv
[ 8.868235] ata1: SATA max UDMA/133 irq 21
[ 8.875057] m25p80 spi0.0: mx25l4005a (512 Kbytes)
[ 8.880016] Creating 2 MTD partitions on "spi_flash":
[ 8.885161] 0x000000000000-0x00000007d000 : "u-boot"
[ 8.891464] 0x00000007e000-0x00000007f000 : "u-boot-env"
[ 8.899741] tun: Universal TUN/TAP device driver, 1.6
[ 8.904838] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 8.911338] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[ 8.919609] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[ 8.935694] libphy: orion_mdio_bus: probed
[ 8.939941] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 8.950287] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:93:ed:26
[ 8.959138] PPP generic driver version 2.4.2
[ 8.963751] PPP Deflate Compression module registered
[ 8.968793] PPP MPPE Compression module registered
[ 8.973659] NET: Registered protocol family 24
[ 8.978268] usbcore: registered new interface driver rtl8187
[ 8.983990] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 8.991518] usbcore: registered new interface driver pegasus
[ 8.997354] usbcore: registered new interface driver asix
[ 9.002904] usbcore: registered new interface driver ax88179_178a
[ 9.009145] usbcore: registered new interface driver cdc_ether
[ 9.015128] usbcore: registered new interface driver net1080
[ 9.020996] usbcore: registered new interface driver cdc_subset
[ 9.027060] usbcore: registered new interface driver zaurus
[ 9.032811] usbcore: registered new interface driver ipheth
[ 9.038563] usbcore: registered new interface driver cdc_ncm
[ 9.045211] aoe: cannot create debugfs directory
[ 9.049954] aoe: AoE v85 initialised.
[ 9.054441] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[ 9.060488] i2c /dev entries driver
[ 9.064803] md: linear personality registered for level -1
[ 9.070268] md: raid0 personality registered for level 0
[ 9.075615] md: raid1 personality registered for level 1
[ 9.080999] md: raid10 personality registered for level 10
[ 9.086608] md: raid6 personality registered for level 6
[ 9.091943] md: raid5 personality registered for level 5
[ 9.097224] md: raid4 personality registered for level 4
[ 9.102772] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 9.111439] device-mapper: multipath: version 1.6.0 loaded
[ 9.116900] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 9.123444] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 9.130035] device-mapper: multipath service-time: version 0.2.0 loaded
[ 9.136702] device-mapper: dm-log-userspace: version 1.3.0 loaded
[ 9.142802] device-mapper: raid: Loading target version 1.5.2
[ 9.151116] ipip: IPv4 over IPv4 tunneling driver
[ 9.156600] TCP: cubic registered
[ 9.159955] NET: Registered protocol family 10
[ 9.165339] sit: IPv6 over IPv4 tunneling driver
[ 9.170897] NET: Registered protocol family 17
[ 9.175587] NET: Registered protocol family 5
[ 9.180021] 8021q: 802.1Q VLAN Support v1.8
[ 9.184386] NET: Registered protocol family 37
[ 9.188859] Key type dns_resolver registered
[ 9.194424] netpoll: netconsole: local port 6666
[ 9.199024] netpoll: netconsole: local IPv4 address 192.168.1.252
[ 9.205160] netpoll: netconsole: interface 'eth0'
[ 9.209839] netpoll: netconsole: remote port 6666
[ 9.214553] netpoll: netconsole: remote IPv4 address 192.168.1.29
[ 9.220753] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[ 9.227597] netpoll: netconsole: device eth0 not up yet, forcing it
[ 9.236837] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.557118] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 11.566853] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.575941] console [netcon0] enabled
[ 11.579600] netconsole: network logging started
[ 11.584657] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 11.591805] rtc-mv rtc-mv: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 14.420329] ata1: link is slow to respond, please be patient (ready=0)
[ 18.920326] ata1: SRST failed (errno=-16)
[ 24.470327] ata1: link is slow to respond, please be patient (ready=0)
[ 28.970328] ata1: SRST failed (errno=-16)
[ 34.520328] ata1: link is slow to respond, please be patient (ready=0)
[ 63.980336] ata1: SRST failed (errno=-16)
[ 63.984357] ata1: limiting SATA link speed to 1.5 Gbps
[ 68.990335] ata1: SRST failed (errno=-16)
[ 68.994353] ata1: reset failed, giving up
[ 69.015817] Freeing unused kernel memory: 1932K (c0757000 - c093a000)
[ 73.110854] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 73.121328] ehci-orion: EHCI orion driver
[ 73.132325] usbcore: registered new interface driver usb-storage

[Jocko]

Hi bigtoto,

ata1: SRST failed (errno=-16)

should mean you have a hardware issue either on the SATA controller or on your disk (as I assume it is not a jump issue like you can find on Internet)

You can confirm that by extracting your disk and plug in it on a laptop if you can see its partitions in the disk manager console then it is an issue with your Cloudbox platform.

[Bigtoto]

Hi jocko,

Thank's for your help and quick reply.

I'm going to extract the disk and plug elsewhere.

I'll give you new soon.

[Bigtoto]

Hi,

I don't see the disk in the BIOS and I don't see either in disk manager. I think he's really dead.

Thank's to both of you for help.