Front blue led blinking and timeout

[juju74]

Hello, I read a lot of thread on this forum, and I always hangs on the telnet window that meets me timeout. I try to see if I can revive my raid 6, I have a laptop without antivirus or firewall that is connected to a router, the 5big is connected to the lan1 and on the router. I launch the console, type the code, standalone kernel, kirkwood, uImage 3142, it charged, telnet window, I write
username: root
password: giv ...
and there timeout.

I'm lost. :dontknow


google translation because I'm french and I do not'm writing English well, but I manage to read

[fvdw]

Use a wired connection between your laptop and the LAN, disable your firewall or grant the programs the console uses acces to your lan, your pc will ask this permission , use only one active network interface on your pc. So if you have wireless and wired interface disable the wireless adapter

[juju74]

thank you for your answer, I change pc, the kernel has been loaded but the telnet window arrives, I type what exactly, because I have the message timed out each time.
thanks for help.

[fvdw]

Does the uboot window actually shows uploading of the kernel and does it mention "starting kernel" before it closes?

In the telnet client does the enter username request automatically appear ?

Did you try to use the connect button in the telnet client when it has timed out, on systems with a disk problem starting the kernel may exceed waiting time of the telnet client

[juju74]

Does the uboot window actually shows uploading of the kernel and does it mention "starting kernel" before it closes? Yes

In the telnet client does the enter username request automatically appear ? No

Did you try to use the connect button in the telnet client when it has timed out, on systems with a disk problem starting the kernel may exceed waiting time of the telnet client

I should try with a disk less to find the culprit?

[fvdw]

No that won't help. It seems your pc blocks traffic on the telnet port (23)

Other possibility you selected the wrong standalone kernel
What device do you actually have? A 5big vs1 needs another kernel then 5big vs2 (=kirkwood)

[juju74]

it is a 5big Network 2, I'll see to reinstall a new MS Windows :scratch

Thanks again for help.

[juju74]

so I try a new ms windows, I just install the lan and disable the firewall, even result on testing numerous auto1 the window closes before the end of loading the kernel.
I've got the message kernel started only once yesterday, but could not connect has telnet. :dontknow

I replaced my five discs by two blank discs, the 5big net2 working properly (this is a version sold without drives) and have access to the dashboard.

It remains only to find a solution to retrieve my data. :thinking :dontknow

[fvdw]

How is your lan setup? Please describe
How did you the fvdw-sl console?