Jocko wrote:Yes it is safe and you need it as it fixes a bug in the not chrooted environment (so not linked with your version 16.1)
This is not related with the patch...but i do not have acces to the NAS anymore
Yes I assume but maybe you should end the process of moving.the fron LED light up Blue everything is back to normal for now i guess.
Jocko wrote:This is not related with the patch...but i do not have acces to the NAS anymore
Do you use fvdw-sl assistant to find the NAS ?
---edit---Yes I assume but maybe you should end the process of moving.the fron LED light up Blue everything is back to normal for now i guess.
It seems you don't have the common platform (64MB), so as shutdown command (and switchoff button) are set with the known platform, I think these binaries can not run properly.danyboy666 wrote:I think the worst bug right now is when i try to reboot or shutdown the NAS. For some reasons i have to completely unplug it from the sector to be sure the reboot process is completed.
The other bug is the toggle switch in the back on the NAS. It does not respond at all. Also If i do not toggle it off when sending a shutdown command from the web interface the NAS will reboot instead of shuting down.
Jocko wrote:It seems you don't have the common platform (64MB), so as shutdown command (and switchoff button) are set with the known platform, I think these binaries can not run properly.danyboy666 wrote:I think the worst bug right now is when i try to reboot or shutdown the NAS. For some reasons i have to completely unplug it from the sector to be sure the reboot process is completed.
The other bug is the toggle switch in the back on the NAS. It does not respond at all. Also If i do not toggle it off when sending a shutdown command from the web interface the NAS will reboot instead of shuting down.
So the first think to do it is to find information about this undocumented version...
---edit---
at least in 2009, RAM size was 128MB
root@NAS-fvdwsl:/ # df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 226.2M 148.3M 65.4M 69% /
/dev/sda2 226.2M 148.3M 65.4M 69% /
/dev/sda5 786.9M 1.2M 777.6M 0% /rw_fs
tmpfs 4.9M 704.0K 4.2M 14% /rw_fs/tmp/usr/var
/dev/md0 913.7G 40.7G 863.7G 4% /share/1100
/dev/root 226.2M 167.9M 45.7M 79% /lacie-boot
root@NAS-fvdwsl:/ # hdparm -tT /dev/sda
/dev/sda:
Timing cached reads: 244 MB in 2.00 seconds = 121.74 MB/sec
Timing buffered disk reads: 158 MB in 3.03 seconds = 52.15 MB/sec
root@NAS-fvdwsl:/ # hdparm -tT /dev/md0
/dev/md0:
Timing cached reads: 242 MB in 2.01 seconds = 120.69 MB/sec
Timing buffered disk reads: 128 MB in 3.02 seconds = 42.39 MB/sec
//192.168.121.85/fvdw /mnt/fvdw cifs guest,uid=nobody,gid=nogroup,iocharset=utf8,file_mode=0777,dir_mode=0777,noperm 0 0
UUID=531b311c-4657-446b-b0b5-30a51ea59d05 /samba/anonymous/user ext4 defaults 0 0
[2015/12/22 20:01:36, 0] smbd/reply.c:send_file_readX(2614)
send_file_readX: sendfile failed for file temp/blahblah.iso. Terminating
[2015/12/22 20:01:36, 0] lib/util_sock.c:write_data(562)
write_data: write failure in writing to client 192.168.121.101. Error Broken pipe
[2015/12/22 20:01:36, 0] lib/util_sock.c:send_smb(761)
Error writing 75 bytes to client. -1. (Broken pipe)
hahaaa, that confirms that 2big1 do not support sendfile. So you can try to install this patch which disable this support on samba server. viewtopic.php?f=29&t=2377&p=21186#p21186danyboy666 wrote:[2015/12/22 20:01:36, 0] smbd/reply.c:send_file_readX(2614)
send_file_readX: sendfile failed for file temp/blahblah.iso. Terminating
[2015/12/22 20:01:36, 0] lib/util_sock.c:write_data(562)
write_data: write failure in writing to client 192.168.121.101. Error Broken pipe
[2015/12/22 20:01:36, 0] lib/util_sock.c:send_smb(761)
Error writing 75 bytes to client. -1. (Broken pipe)
can't set clock???
~ # dmesg (Uelpenich 2big1)
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.2 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #6 Sat Nov 29 22:15:32 CET 2014
[ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: LaCie 2Big Network
[ 0.000000] Clearing invalid memory bank 0KB@0xffffffff
[ 0.000000] Clearing invalid memory bank 0KB@0xffffffff
[ 0.000000] Clearing invalid memory bank 0KB@0xffffffff
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Ignoring unrecognised tag 0x41000403
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat c03f0934, node_mem_map c3f7b000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro reset=0
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Memory: 60688K/65536K available (2863K kernel code, 158K rwdata, 852K rodata, 125K init, 206K bss, 4848K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc03a8fec (3716 kB)
[ 0.000000] .init : 0xc03a9000 - 0xc03c862c ( 126 kB)
[ 0.000000] .data : 0xc03ca000 - 0xc03f1ac0 ( 159 kB)
[ 0.000000] .bss : 0xc03f1ac0 - 0xc0425680 ( 207 kB)
[ 0.000000] NR_IRQS:64
[ 0.000023] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
[ 8.411848] Console: colour dummy device 80x30
[ 8.411898] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 8.481478] pid_max: default: 32768 minimum: 301
[ 8.481760] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 8.481797] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 8.482951] CPU: Testing write buffer coherency: ok
[ 8.483620] Setting up static identity map for 0x2d1678 - 0x2d16b4
[ 8.488267] VFP support v0.3: not present
[ 8.489514] NET: Registered protocol family 16
[ 8.490647] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 8.495168] Orion ID: MV88F5182-A2. TCLK=166666667.
[ 8.496164] initial MPP regs: 00000003 55000000 03ff0000
[ 8.496221] final MPP regs: 00000003 55000000 03ff5555
[ 8.501627] net2big: Flash writing is not yet supported.
[ 8.546655] bio: create slab <bio-0> at 0
[ 8.548447] vgaarb: loaded
[ 8.550280] SCSI subsystem initialized
[ 8.551622] libata version 3.00 loaded.
[ 8.554202] usbcore: registered new interface driver usbfs
[ 8.554718] usbcore: registered new interface driver hub
[ 8.555305] usbcore: registered new device driver usb
[ 8.559665] Switched to clocksource orion_clocksource
[ 8.599913] NET: Registered protocol family 2
[ 8.601300] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 8.601376] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 8.601483] TCP: Hash tables configured (established 1024 bind 1024)
[ 8.601637] TCP: reno registered
[ 8.601680] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 8.601743] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 8.602151] NET: Registered protocol family 1
[ 8.602234] PCI: CLS 0 bytes, default 32
[ 8.605906] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 8.607142] VFS: Disk quotas dquot_6.5.2
[ 8.607283] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 8.607605] msgmni has been set to 118
[ 8.611388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 8.611466] io scheduler noop registered
[ 8.611491] io scheduler deadline registered
[ 8.611560] io scheduler cfq registered (default)
[ 8.612144] mv_xor mv_xor.0: Marvell shared XOR driver
[ 8.651551] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 8.691553] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 8.708205] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 8.730866] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3, base_baud = 10416666) is a 16550A
[ 9.122871] console [ttyS0] enabled
[ 9.152970] brd: module loaded
[ 9.168958] loop: module loaded
[ 9.172980] Uniform Multi-Platform E-IDE driver
[ 9.178354] ide-gd driver 1.18
[ 9.183901] sata_mv sata_mv.0: version 1.28
[ 9.184071] sata_mv sata_mv.0: cannot get optional clkdev
[ 9.190402] sata_mv sata_mv.0: slots 32 ports 2
[ 9.204811] scsi0 : sata_mv
[ 9.209168] scsi1 : sata_mv
[ 9.213177] ata1: SATA max UDMA/133 irq 29
[ 9.217283] ata2: SATA max UDMA/133 irq 29
[ 9.222739] tun: Universal TUN/TAP device driver, 1.6
[ 9.227790] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 9.234524] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[ 9.244048] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[ 9.261076] libphy: orion_mdio_bus: probed
[ 9.265747] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 9.354542] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:84:39:ef
[ 9.366555] aoe: cannot create debugfs directory
[ 9.371524] aoe: AoE v85 initialised.
[ 9.375823] mousedev: PS/2 mouse device common for all mice
[ 9.382692] i2c /dev entries driver
[ 9.392044] rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6
[ 9.404160] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
[ 9.413107] at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
[ 9.428416] Netfilter messages via NETLINK v0.30.
[ 9.433727] ipip: IPv4 over IPv4 tunneling driver
[ 9.440398] TCP: cubic registered
[ 9.443772] NET: Registered protocol family 17
[ 9.448245] NET: Registered protocol family 5
[ 9.455104] console [netcon0] enabled
[ 9.458770] netconsole: network logging started
[ 9.464969] rtc-rs5c372 0-0032: setting system clock to 2015-10-18 22:18:14 UTC (1445206694)
[ 9.731497] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.771552] ata1.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
[ 9.778075] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 9.841574] ata1.00: configured for UDMA/133
[ 9.846577] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 MX4O PQ: 0 ANSI: 5
[ 9.856016] fvdw1 disk index before get_sd_name = 0
[ 9.860887] device-name= sata_mv
[ 9.864153] fvdw2 disk index after get_sd_name = 1
[ 9.868938] fvdw3 prefix[0]=s prefix[1]=d
[ 9.873049] fvdw4 diskname = sdb
[ 9.877592] sd 0:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 9.885380] sd 0:0:0:0: [sdb] 4096-byte physical blocks
[ 9.893124] sd 0:0:0:0: [sdb] Write Protect is off
[ 9.897937] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 9.898352] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.950725] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 >
[ 9.964440] sd 0:0:0:0: [sdb] Attached SCSI disk
[ 10.401493] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 10.441552] ata2.00: ATA-8: ST2000DM001-9YN164, CC4G, max UDMA/133
[ 10.447736] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 10.511576] ata2.00: configured for UDMA/133
[ 10.516554] scsi 1:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4G PQ: 0 ANSI: 5
[ 10.526012] fvdw1 disk index before get_sd_name = 1
[ 10.530884] device-name= sata_mv
[ 10.534148] fvdw2 disk index after get_sd_name = 0
[ 10.538927] fvdw3 prefix[0]=s prefix[1]=d
[ 10.543039] fvdw4 diskname = sda
[ 10.547592] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 10.555376] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 10.562436] sd 1:0:0:0: [sda] Write Protect is off
[ 10.567243] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 10.567655] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.623070] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 10.636924] sd 1:0:0:0: [sda] Attached SCSI disk
[ 10.665452] kjournald starting. Commit interval 5 seconds
[ 10.670990] EXT3-fs (sda7): mounted filesystem with ordered data mode
[ 10.677512] VFS: Mounted root (ext3 filesystem) readonly on device 8:23.
[ 10.685185] Freeing unused kernel memory: 124K (c03a9000 - c03c8000)
[ 10.973220] EXT3-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended
[ 10.982389] EXT3-fs (sda7): using internal journal
[ 12.091771] kjournald starting. Commit interval 5 seconds
[ 12.097319] EXT3-fs (sda1): warning: checktime reached, running e2fsck is recommended
[ 12.105584] EXT3-fs (sda1): using internal journal
[ 12.141635] EXT3-fs (sda1): recovery complete
[ 12.145998] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 14.391773] kjournald starting. Commit interval 5 seconds
[ 14.397761] EXT3-fs (sda5): using internal journal
[ 14.421630] EXT3-fs (sda5): recovery complete
[ 14.425991] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 14.599544] random: nonblocking pool is initialized
[ 14.678024] Adding 524284k swap on /dev/sda3. Priority:-1 extents:1 across:524284k
[ 14.819377] NET: Registered protocol family 10
[ 17.543023] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 17.602026] fuse init (API version 7.22)
[ 17.656800] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 17.664989] ehci-orion: EHCI orion driver
[ 17.669163] orion-ehci orion-ehci.0: EHCI Host Controller
[ 17.674675] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 17.682595] orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
[ 17.701484] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 17.709000] hub 1-0:1.0: USB hub found
[ 17.712909] hub 1-0:1.0: 1 port detected
[ 17.717592] orion-ehci orion-ehci.1: EHCI Host Controller
[ 17.723086] orion-ehci orion-ehci.1: new USB bus registered, assigned bus number 2
[ 17.730974] orion-ehci orion-ehci.1: irq 12, io mem 0xf10a0000
[ 17.751485] orion-ehci orion-ehci.1: USB 2.0 started, EHCI 1.00
[ 17.758895] hub 2-0:1.0: USB hub found
[ 17.762781] hub 2-0:1.0: 1 port detected
[ 17.821559] usbcore: registered new interface driver usb-storage
[ 17.875248] usbcore: registered new interface driver usblp
[ 17.950299] RPC: Registered named UNIX socket transport module.
[ 17.956257] RPC: Registered udp transport module.
[ 17.960954] RPC: Registered tcp transport module.
[ 17.965674] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 18.061811] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 18.124980] Loading iSCSI transport class v2.0-870.
[ 18.146856] iscsi: registered transport (tcp)
[ 18.208549] Linux video capture interface: v2.00
[ 18.328021] uvcvideo: Unable to create debugfs directory
[ 18.333643] usbcore: registered new interface driver uvcvideo
[ 18.339376] USB Video Class driver (1.1.1)
[ 18.465061] md: raid0 personality registered for level 0
[ 18.520157] md: raid1 personality registered for level 1
[ 18.742122] raid6: int32x1 19 MB/s
[ 18.912971] raid6: int32x2 29 MB/s
[ 19.081893] raid6: int32x4 30 MB/s
[ 19.252936] raid6: int32x8 36 MB/s
[ 19.256689] raid6: using algorithm int32x8 (36 MB/s)
[ 19.261681] raid6: using intx1 recovery algorithm
[ 19.273520] async_tx: api initialized (async)
[ 19.280846] xor: measuring software checksum speed
[ 19.381470] arm4regs : 308.800 MB/sec
[ 19.481462] 8regs : 206.800 MB/sec
[ 19.581455] 32regs : 263.200 MB/sec
[ 19.585635] xor: using function: arm4regs (308.800 MB/sec)
[ 19.617755] md: raid6 personality registered for level 6
[ 19.623118] md: raid5 personality registered for level 5
[ 19.628424] md: raid4 personality registered for level 4
[ 19.685627] md: raid10 personality registered for level 10
[ 32.602990] udevd (717): /proc/717/oom_adj is deprecated, please use /proc/717/oom_score_adj instead.
[ 32.612443] udev: starting version 130
[ 42.277672] md: bind<sdb8>
[ 42.281127] md: bind<sda8>
[ 42.365458] md/raid1:md0: active with 2 out of 2 mirrors
[ 42.371048] md0: detected capacity change from 0 to 1997430849536
[ 42.387451] md0: unknown partition table
[ 51.841958] kjournald starting. Commit interval 5 seconds
[ 51.871357] EXT3-fs (md0): using internal journal
[ 51.931652] EXT3-fs (md0): recovery complete
[ 51.935929] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 53.862652] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 56.733227] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ 56.743136] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
~ #
Return to Lacie 2Big Network vs1
Users browsing this forum: No registered users and 1 guest