plugout.net

by **b1gnas** » Sun Oct 04, 2015 8:10 pm

Code: Select all: root@fvdwsl-base:/ # mkdir /tmp/hitachi root@fvdwsl-base:/ # mount /dev/sde1 /tmp/hitachi root@fvdwsl-base:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.2 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #1 Thu Jan 8 23:24:14 CET 2015 [ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: LaCie 5Big1 Network [ 0.000000] Clearing invalid memory bank 0KB@0x00000000 [ 0.000000] Clearing invalid memory bank 0KB@0x00000000 [ 0.000000] Clearing invalid memory bank 0KB@0x00000000 [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c03de85c, node_mem_map c7efb000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro boardType=mv88F5281 productType=5Big reset=0 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 125736K/131072K available (2809K kernel code, 158K rwdata, 848K rodata, 114K init, 206K bss, 5336K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc039a7f0 (3658 kB) [ 0.000000] .init : 0xc039b000 - 0xc03b78c8 ( 115 kB) [ 0.000000] .data : 0xc03b8000 - 0xc03df9e0 ( 159 kB) [ 0.000000] .bss : 0xc03df9e0 - 0xc04135c0 ( 207 kB) [ 0.000000] NR_IRQS:64 [ 0.000016] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns [ 14.345351] Console: colour dummy device 80x30 [ 14.345390] Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464) [ 14.405046] pid_max: default: 32768 minimum: 301 [ 14.405253] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 14.405280] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 14.406120] CPU: Testing write buffer coherency: ok [ 14.406637] Setting up static identity map for 0x2a8b20 - 0x2a8b5c [ 14.410116] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 14.411079] NET: Registered protocol family 16 [ 14.411956] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 14.415145] 5big1 init started [ 14.415174] Orion ID: MV88F5281-D0. TCLK=166666667. [ 14.415235] Orion: Applying 5281 D0 WFI workaround. [ 14.415584] 5big1 init 1 [ 14.415606] initial MPP regs: 00000003 00000000 00170000 [ 14.415645] final MPP regs: 00000003 00000000 00170000 [ 14.415674] 5big1 init 2 [ 14.415690] net5big: powering up SATA drives [ 14.415711] 5big1 init 3 [ 14.415724] 5big1 init 4 [ 14.416079] 5big1 init 5 [ 14.417021] 5big1 init 6 [ 14.417350] 5big1 init 7 [ 14.417680] 5big1 init 8 [ 14.418016] 5big1 init 9 [ 14.418348] 5big1 init 10 [ 14.418994] 5big1 init 11 [ 14.419323] 5big1 init 12 [ 14.419346] net5big: turning off power-off control GPIO [ 14.419369] net5big: Flash writing is not yet supported. [ 14.419384] 5big1 init end [ 14.420331] orion_gpio_is_valid: invalid GPIO 20 [ 14.420354] orion_gpio_is_valid: invalid GPIO 20 [ 14.420371] net5big_pci_preinit failed to gpio_request 20 [ 14.420922] PCI host bridge to bus 0000:00 [ 14.420966] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff] [ 14.420996] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 14.421025] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 14.421088] pci 0000:00:00.0: [11ab:5281] type 00 class 0x058000 [ 14.421136] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref] [ 14.421170] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x07ffffff] [ 14.421740] PCI: bus0: Fast back to back transfers disabled [ 14.421780] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 14.422335] PCI host bridge to bus 0000:01 [ 14.422379] pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff] [ 14.422409] pci_bus 0000:01: root bus resource [io 0x10000-0x1ffff] [ 14.422438] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff] [ 14.422510] pci 0000:01:00.0: [11ab:5281] type 00 class 0x058000 [ 14.422567] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x07ffffff 64bit pref] [ 14.422605] pci 0000:01:00.0: reg 0x18: [mem 0x10000000-0x1fffffff 64bit pref] [ 14.422642] pci 0000:01:00.0: reg 0x20: [mem 0xf1000000-0xf10fffff 64bit] [ 14.422678] pci 0000:01:00.0: reg 0x30: [mem 0xe0000000-0xe7ffffff pref] [ 14.422742] pci 0000:01:00.0: supports D1 D2 [ 14.422768] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot [ 14.423334] pci 0000:01:07.0: [11ab:6081] type 00 class 0x010000 [ 14.423399] pci 0000:01:07.0: reg 0x10: [mem 0x40000000-0x400fffff 64bit] [ 14.423435] pci 0000:01:07.0: reg 0x18: [io 0xf0100000-0xf01000ff] [ 14.424039] PCI: bus1: Fast back to back transfers enabled [ 14.424079] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 14.424158] pci 0000:01:07.0: BAR 0: assigned [mem 0xe8000000-0xe80fffff 64bit] [ 14.424200] pci 0000:01:07.0: BAR 2: assigned [io 0x10000-0x100ff] [ 14.453786] bio: create slab <bio-0> at 0 [ 14.455195] vgaarb: loaded [ 14.456506] SCSI subsystem initialized [ 14.457461] libata version 3.00 loaded. [ 14.459297] usbcore: registered new interface driver usbfs [ 14.459675] usbcore: registered new interface driver hub [ 14.460109] usbcore: registered new device driver usb [ 14.463201] Switched to clocksource orion_clocksource [ 14.491205] NET: Registered protocol family 2 [ 14.492075] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 14.492133] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 14.492182] TCP: Hash tables configured (established 1024 bind 1024) [ 14.492289] TCP: reno registered [ 14.492316] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 14.492370] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 14.492678] NET: Registered protocol family 1 [ 14.492769] PCI: CLS 32 bytes, default 32 [ 14.495508] futex hash table entries: 256 (order: -1, 3072 bytes) [ 14.496436] VFS: Disk quotas dquot_6.5.2 [ 14.496537] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 14.496804] msgmni has been set to 245 [ 14.499500] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 14.499528] io scheduler noop registered [ 14.499546] io scheduler deadline registered [ 14.499588] io scheduler cfq registered (default) [ 14.500071] mv_xor mv_xor.0: Marvell shared XOR driver [ 14.515073] mv_xor mv_xor.0: Self-test copy failed compare, disabling [ 14.526715] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 14.548645] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3, base_baud = 10416666) is a 16550A [ 15.074192] console [ttyS0] enabled [ 15.097093] brd: module loaded [ 15.109549] loop: module loaded [ 15.113300] Uniform Multi-Platform E-IDE driver [ 15.118485] ide-gd driver 1.18 [ 15.122989] sata_mv 0000:01:07.0: version 1.28 [ 15.123651] sata_mv 0000:01:07.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx [ 15.162693] scsi0 : sata_mv [ 15.166692] scsi1 : sata_mv [ 15.170547] scsi2 : sata_mv [ 15.174425] scsi3 : sata_mv [ 15.178311] scsi4 : sata_mv [ 15.182188] scsi5 : sata_mv [ 15.186090] scsi6 : sata_mv [ 15.189968] scsi7 : sata_mv [ 15.193604] ata1: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8022000 irq 52 [ 15.201285] ata2: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8024000 irq 52 [ 15.208939] ata3: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8026000 irq 52 [ 15.216592] ata4: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8028000 irq 52 [ 15.224224] ata5: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8032000 irq 52 [ 15.231877] ata6: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8034000 irq 52 [ 15.239531] ata7: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8036000 irq 52 [ 15.247178] ata8: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8038000 irq 52 [ 15.256705] sata_mv sata_mv.0: version 1.28 [ 15.256935] sata_mv sata_mv.0: cannot get optional clkdev [ 15.264537] sata_mv sata_mv.0: slots 32 ports 5 [ 15.288279] scsi8 : sata_mv [ 15.292173] scsi9 : sata_mv [ 15.296102] scsi10 : sata_mv [ 15.300087] scsi11 : sata_mv [ 15.304064] scsi12 : sata_mv [ 15.307845] ata9: SATA max UDMA/133 irq 29 [ 15.311945] ata10: SATA max UDMA/133 irq 29 [ 15.316157] ata11: SATA max UDMA/133 irq 29 [ 15.320333] ata12: SATA max UDMA/133 irq 29 [ 15.324507] ata13: SATA max UDMA/133 irq 29 [ 15.330115] tun: Universal TUN/TAP device driver, 1.6 [ 15.335185] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 15.341744] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 15.350706] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 15.367377] libphy: orion_mdio_bus: probed [ 15.371843] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 15.457566] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:86:ea:3a [ 15.468626] aoe: cannot create debugfs directory [ 15.473472] aoe: AoE v85 initialised. [ 15.478206] i2c /dev entries driver [ 15.486330] rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6 [ 15.499645] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0 [ 15.508022] at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write [ 15.532868] Netfilter messages via NETLINK v0.30. [ 15.537981] ipip: IPv4 over IPv4 tunneling driver [ 15.544183] TCP: cubic registered [ 15.547546] NET: Registered protocol family 17 [ 15.552008] NET: Registered protocol family 5 [ 15.558348] console [netcon0] enabled [ 15.562005] netconsole: network logging started [ 15.568131] rtc-rs5c372 0-0032: setting system clock to 2015-10-04 19:17:34 UTC (1443986254) [ 15.755094] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 15.795132] ata1.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 15.801300] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 15.865143] ata1.00: configured for UDMA/133 [ 15.869925] scsi 0:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 [ 15.878997] fvdw1 disk index before get_sd_name = 0 [ 15.883865] device-name= sata_mv [ 15.887118] fvdw2 disk index after get_sd_name = 4 [ 15.891898] fvdw3 prefix[0]=s prefix[1]=d [ 15.896001] fvdw4 diskname = sde [ 15.900220] sd 0:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 15.907900] sd 0:0:0:0: [sde] 4096-byte physical blocks [ 15.915172] sd 0:0:0:0: [sde] Write Protect is off [ 15.919966] sd 0:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 15.920257] sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.978113] sde: sde4 < sde5 sde6 sde7 sde8 > [ 15.986904] sd 0:0:0:0: [sde] Attached SCSI disk [ 16.395059] ata9: failed to resume link (SControl 0) [ 16.400029] ata9: SATA link down (SStatus 0 SControl 0) [ 16.415098] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 16.455154] ata2.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 16.461341] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 16.505147] ata2.00: configured for UDMA/133 [ 16.509902] scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 [ 16.518980] fvdw1 disk index before get_sd_name = 1 [ 16.523848] device-name= sata_mv [ 16.527100] fvdw2 disk index after get_sd_name = 3 [ 16.531881] fvdw3 prefix[0]=s prefix[1]=d [ 16.535983] fvdw4 diskname = sdd [ 16.540183] sd 1:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 16.547856] sd 1:0:0:0: [sdd] 4096-byte physical blocks [ 16.554979] sd 1:0:0:0: [sdd] Write Protect is off [ 16.559809] sd 1:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 16.560099] sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.607975] sdd: sdd4 < sdd5 sdd6 sdd7 sdd8 > [ 16.616833] sd 1:0:0:0: [sdd] Attached SCSI disk [ 17.055093] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 17.095133] ata3.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 17.101301] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 17.165143] ata3.00: configured for UDMA/133 [ 17.169894] scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 [ 17.178985] fvdw1 disk index before get_sd_name = 2 [ 17.183857] device-name= sata_mv [ 17.187109] fvdw2 disk index after get_sd_name = 2 [ 17.191881] fvdw3 prefix[0]=s prefix[1]=d [ 17.195983] fvdw4 diskname = sdc [ 17.200200] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 17.207874] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 17.215004] sd 2:0:0:0: [sdc] Write Protect is off [ 17.219835] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 17.220128] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.276018] sdc: sdc4 < sdc5 sdc6 sdc7 sdc8 > [ 17.284874] sd 2:0:0:0: [sdc] Attached SCSI disk [ 17.715093] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 17.755133] ata4.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 17.761302] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 17.825144] ata4.00: configured for UDMA/133 [ 17.829902] scsi 3:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 [ 17.838994] fvdw1 disk index before get_sd_name = 3 [ 17.843867] device-name= sata_mv [ 17.847118] fvdw2 disk index after get_sd_name = 1 [ 17.851891] fvdw3 prefix[0]=s prefix[1]=d [ 17.855993] fvdw4 diskname = sdb [ 17.860225] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 17.867902] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 17.875026] sd 3:0:0:0: [sdb] Write Protect is off [ 17.879853] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 17.880144] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.934337] sdb: sdb4 < sdb5 sdb6 sdb7 sdb8 > [ 17.943239] sd 3:0:0:0: [sdb] Attached SCSI disk [ 18.375093] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 18.415134] ata5.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 18.421303] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 18.485147] ata5.00: configured for UDMA/133 [ 18.489915] scsi 4:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 [ 18.499024] fvdw1 disk index before get_sd_name = 4 [ 18.503893] device-name= sata_mv [ 18.507144] fvdw2 disk index after get_sd_name = 0 [ 18.511918] fvdw3 prefix[0]=s prefix[1]=d [ 18.516020] fvdw4 diskname = sda [ 18.520255] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 18.527929] sd 4:0:0:0: [sda] 4096-byte physical blocks [ 18.535078] sd 4:0:0:0: [sda] Write Protect is off [ 18.539872] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 18.540162] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 18.595020] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 18.606375] sd 4:0:0:0: [sda] Attached SCSI disk [ 18.875088] ata6: SATA link down (SStatus 0 SControl 300) [ 19.225084] ata7: SATA link down (SStatus 0 SControl 300) [ 19.575087] ata8: SATA link down (SStatus 0 SControl 300) [ 20.645061] ata10: failed to resume link (SControl 0) [ 20.650120] ata10: SATA link down (SStatus 0 SControl 0) [ 21.725060] ata11: failed to resume link (SControl 0) [ 21.730121] ata11: SATA link down (SStatus 0 SControl 0) [ 22.805061] ata12: failed to resume link (SControl 0) [ 22.810120] ata12: SATA link down (SStatus 0 SControl 0) [ 23.885061] ata13: failed to resume link (SControl 0) [ 23.890121] ata13: SATA link down (SStatus 0 SControl 0) [ 23.897182] EXT3-fs (sda7): recovery required on readonly filesystem [ 23.903524] EXT3-fs (sda7): write access will be enabled during recovery [ 54.502688] ata5.00: exception Emask 0x0 SAct 0x3ffff SErr 0x0 action 0x6 frozen [ 54.510095] ata5.00: failed command: READ FPDMA QUEUED [ 54.515266] ata5.00: cmd 60/08:00:d8:7d:52/00:00:00:00:00/40 tag 0 ncq 4096 in [ 54.515266] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.529833] ata5.00: status: { DRDY } [ 54.533495] ata5.00: failed command: READ FPDMA QUEUED [ 54.538671] ata5.00: cmd 60/08:08:e0:7d:52/00:00:00:00:00/40 tag 1 ncq 4096 in [ 54.538671] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.553239] ata5.00: status: { DRDY } [ 54.556913] ata5.00: failed command: READ FPDMA QUEUED [ 54.562070] ata5.00: cmd 60/08:10:e8:7d:52/00:00:00:00:00/40 tag 2 ncq 4096 in [ 54.562070] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.576637] ata5.00: status: { DRDY } [ 54.580298] ata5.00: failed command: READ FPDMA QUEUED [ 54.585474] ata5.00: cmd 60/08:18:f0:7d:52/00:00:00:00:00/40 tag 3 ncq 4096 in [ 54.585474] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.600042] ata5.00: status: { DRDY } [ 54.603704] ata5.00: failed command: READ FPDMA QUEUED [ 54.608879] ata5.00: cmd 60/08:20:f8:7d:52/00:00:00:00:00/40 tag 4 ncq 4096 in [ 54.608879] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.623447] ata5.00: status: { DRDY } [ 54.627122] ata5.00: failed command: READ FPDMA QUEUED [ 54.632279] ata5.00: cmd 60/08:28:00:7e:52/00:00:00:00:00/40 tag 5 ncq 4096 in [ 54.632279] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.646845] ata5.00: status: { DRDY } [ 54.650507] ata5.00: failed command: READ FPDMA QUEUED [ 54.655682] ata5.00: cmd 60/08:30:08:7e:52/00:00:00:00:00/40 tag 6 ncq 4096 in [ 54.655682] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.670250] ata5.00: status: { DRDY } [ 54.673912] ata5.00: failed command: READ FPDMA QUEUED [ 54.679087] ata5.00: cmd 60/08:38:10:7e:52/00:00:00:00:00/40 tag 7 ncq 4096 in [ 54.679087] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.693656] ata5.00: status: { DRDY } [ 54.697330] ata5.00: failed command: READ FPDMA QUEUED [ 54.702487] ata5.00: cmd 60/08:40:18:7e:52/00:00:00:00:00/40 tag 8 ncq 4096 in [ 54.702487] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.717054] ata5.00: status: { DRDY } [ 54.720716] ata5.00: failed command: READ FPDMA QUEUED [ 54.725891] ata5.00: cmd 60/08:48:20:7e:52/00:00:00:00:00/40 tag 9 ncq 4096 in [ 54.725891] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.740458] ata5.00: status: { DRDY } [ 54.744122] ata5.00: failed command: READ FPDMA QUEUED [ 54.749297] ata5.00: cmd 60/08:50:28:7e:52/00:00:00:00:00/40 tag 10 ncq 4096 in [ 54.749297] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.763951] ata5.00: status: { DRDY } [ 54.767629] ata5.00: failed command: READ FPDMA QUEUED [ 54.772791] ata5.00: cmd 60/08:58:30:7e:52/00:00:00:00:00/40 tag 11 ncq 4096 in [ 54.772791] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.787443] ata5.00: status: { DRDY } [ 54.791105] ata5.00: failed command: READ FPDMA QUEUED [ 54.796281] ata5.00: cmd 60/08:60:38:7e:52/00:00:00:00:00/40 tag 12 ncq 4096 in [ 54.796281] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.810936] ata5.00: status: { DRDY } [ 54.814598] ata5.00: failed command: READ FPDMA QUEUED [ 54.819773] ata5.00: cmd 60/08:68:40:7e:52/00:00:00:00:00/40 tag 13 ncq 4096 in [ 54.819773] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.834427] ata5.00: status: { DRDY } [ 54.838102] ata5.00: failed command: READ FPDMA QUEUED [ 54.843260] ata5.00: cmd 60/08:70:48:7e:52/00:00:00:00:00/40 tag 14 ncq 4096 in [ 54.843260] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.857911] ata5.00: status: { DRDY } [ 54.861573] ata5.00: failed command: READ FPDMA QUEUED [ 54.866749] ata5.00: cmd 60/08:78:50:7e:52/00:00:00:00:00/40 tag 15 ncq 4096 in [ 54.866749] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.881403] ata5.00: status: { DRDY } [ 54.885077] ata5.00: failed command: READ FPDMA QUEUED [ 54.890234] ata5.00: cmd 60/08:80:58:7e:52/00:00:00:00:00/40 tag 16 ncq 4096 in [ 54.890234] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.904887] ata5.00: status: { DRDY } [ 54.908564] ata5.00: failed command: READ FPDMA QUEUED [ 54.913728] ata5.00: cmd 60/08:88:60:7e:52/00:00:00:00:00/40 tag 17 ncq 4096 in [ 54.913728] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 54.928379] ata5.00: status: { DRDY } [ 54.932054] ata5: hard resetting link [ 55.445097] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 55.525167] ata5.00: configured for UDMA/133 [ 55.529448] ata5.00: device reported invalid CHS sector 0 [ 55.534838] ata5.00: device reported invalid CHS sector 0 [ 55.540254] ata5.00: device reported invalid CHS sector 0 [ 55.545659] ata5.00: device reported invalid CHS sector 0 [ 55.551044] ata5.00: device reported invalid CHS sector 0 [ 55.556453] ata5.00: device reported invalid CHS sector 0 [ 55.561845] ata5.00: device reported invalid CHS sector 0 [ 55.567253] ata5.00: device reported invalid CHS sector 0 [ 55.572644] ata5.00: device reported invalid CHS sector 0 [ 55.578053] ata5.00: device reported invalid CHS sector 0 [ 55.583445] ata5.00: device reported invalid CHS sector 0 [ 55.588854] ata5.00: device reported invalid CHS sector 0 [ 55.594245] ata5.00: device reported invalid CHS sector 0 [ 55.599653] ata5.00: device reported invalid CHS sector 0 [ 55.605060] ata5.00: device reported invalid CHS sector 0 [ 55.610453] ata5.00: device reported invalid CHS sector 0 [ 55.615862] ata5.00: device reported invalid CHS sector 0 [ 55.621254] ata5.00: device reported invalid CHS sector 0 [ 55.626707] ata5: EH complete [ 86.522730] ata5.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen [ 86.530402] ata5.00: failed command: READ FPDMA QUEUED [ 86.535584] ata5.00: cmd 60/08:00:68:7f:52/00:00:00:00:00/40 tag 0 ncq 4096 in [ 86.535584] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.550148] ata5.00: status: { DRDY } [ 86.553811] ata5.00: failed command: READ FPDMA QUEUED [ 86.558986] ata5.00: cmd 60/08:08:58:7e:52/00:00:00:00:00/40 tag 1 ncq 4096 in [ 86.558986] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.573554] ata5.00: status: { DRDY } [ 86.577228] ata5.00: failed command: READ FPDMA QUEUED [ 86.582386] ata5.00: cmd 60/08:10:50:7e:52/00:00:00:00:00/40 tag 2 ncq 4096 in [ 86.582386] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.596951] ata5.00: status: { DRDY } [ 86.600613] ata5.00: failed command: READ FPDMA QUEUED [ 86.605789] ata5.00: cmd 60/08:18:48:7e:52/00:00:00:00:00/40 tag 3 ncq 4096 in [ 86.605789] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.620357] ata5.00: status: { DRDY } [ 86.624019] ata5.00: failed command: READ FPDMA QUEUED [ 86.629196] ata5.00: cmd 60/08:20:70:7f:52/00:00:00:00:00/40 tag 4 ncq 4096 in [ 86.629196] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.643762] ata5.00: status: { DRDY } [ 86.647437] ata5.00: failed command: READ FPDMA QUEUED [ 86.652594] ata5.00: cmd 60/08:28:78:7f:52/00:00:00:00:00/40 tag 5 ncq 4096 in [ 86.652594] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.667160] ata5.00: status: { DRDY } [ 86.670822] ata5.00: failed command: READ FPDMA QUEUED [ 86.675997] ata5.00: cmd 60/08:30:80:7f:52/00:00:00:00:00/40 tag 6 ncq 4096 in [ 86.675997] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.690565] ata5.00: status: { DRDY } [ 86.694228] ata5.00: failed command: READ FPDMA QUEUED [ 86.699404] ata5.00: cmd 60/08:38:88:7f:52/00:00:00:00:00/40 tag 7 ncq 4096 in [ 86.699404] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.713972] ata5.00: status: { DRDY } [ 86.717646] ata5.00: failed command: READ FPDMA QUEUED [ 86.722803] ata5.00: cmd 60/08:40:90:7f:52/00:00:00:00:00/40 tag 8 ncq 4096 in [ 86.722803] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.737369] ata5.00: status: { DRDY } [ 86.741030] ata5.00: failed command: READ FPDMA QUEUED [ 86.746207] ata5.00: cmd 60/08:48:98:7f:52/00:00:00:00:00/40 tag 9 ncq 4096 in [ 86.746207] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.760774] ata5.00: status: { DRDY } [ 86.764436] ata5.00: failed command: READ FPDMA QUEUED [ 86.769612] ata5.00: cmd 60/08:50:a0:7f:52/00:00:00:00:00/40 tag 10 ncq 4096 in [ 86.769612] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.784266] ata5.00: status: { DRDY } [ 86.787941] ata5.00: failed command: READ FPDMA QUEUED [ 86.793097] ata5.00: cmd 60/08:58:a8:7f:52/00:00:00:00:00/40 tag 11 ncq 4096 in [ 86.793097] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.807750] ata5.00: status: { DRDY } [ 86.811412] ata5.00: failed command: READ FPDMA QUEUED [ 86.816587] ata5.00: cmd 60/08:60:b0:7f:52/00:00:00:00:00/40 tag 12 ncq 4096 in [ 86.816587] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.831242] ata5.00: status: { DRDY } [ 86.834904] ata5.00: failed command: READ FPDMA QUEUED [ 86.840079] ata5.00: cmd 60/08:68:b8:7f:52/00:00:00:00:00/40 tag 13 ncq 4096 in [ 86.840079] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.854734] ata5.00: status: { DRDY } [ 86.858411] ata5.00: failed command: READ FPDMA QUEUED [ 86.863575] ata5.00: cmd 60/08:70:c0:7f:52/00:00:00:00:00/40 tag 14 ncq 4096 in [ 86.863575] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.878226] ata5.00: status: { DRDY } [ 86.881889] ata5.00: failed command: READ FPDMA QUEUED [ 86.887062] ata5.00: cmd 60/08:78:c8:7f:52/00:00:00:00:00/40 tag 15 ncq 4096 in [ 86.887062] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.901710] ata5.00: status: { DRDY } [ 86.905384] ata5.00: failed command: READ FPDMA QUEUED [ 86.910541] ata5.00: cmd 60/08:80:d0:7f:52/00:00:00:00:00/40 tag 16 ncq 4096 in [ 86.910541] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.925194] ata5.00: status: { DRDY } [ 86.928855] ata5.00: failed command: READ FPDMA QUEUED [ 86.934015] ata5.00: cmd 60/08:88:d8:7f:52/00:00:00:00:00/40 tag 17 ncq 4096 in [ 86.934015] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.948668] ata5.00: status: { DRDY } [ 86.952331] ata5.00: failed command: READ FPDMA QUEUED [ 86.957504] ata5.00: cmd 60/08:90:e0:7f:52/00:00:00:00:00/40 tag 18 ncq 4096 in [ 86.957504] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.972151] ata5.00: status: { DRDY } [ 86.975826] ata5.00: failed command: READ FPDMA QUEUED [ 86.980984] ata5.00: cmd 60/08:98:e8:7f:52/00:00:00:00:00/40 tag 19 ncq 4096 in [ 86.980984] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 86.995636] ata5.00: status: { DRDY } [ 86.999297] ata5.00: failed command: READ FPDMA QUEUED [ 87.004458] ata5.00: cmd 60/08:a0:f0:7f:52/00:00:00:00:00/40 tag 20 ncq 4096 in [ 87.004458] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 87.019111] ata5.00: status: { DRDY } [ 87.022772] ata5.00: failed command: READ FPDMA QUEUED [ 87.027945] ata5.00: cmd 60/08:a8:f8:7f:52/00:00:00:00:00/40 tag 21 ncq 4096 in [ 87.027945] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 87.042594] ata5.00: status: { DRDY } [ 87.046269] ata5.00: failed command: READ FPDMA QUEUED [ 87.051425] ata5.00: cmd 60/08:b0:00:80:52/00:00:00:00:00/40 tag 22 ncq 4096 in [ 87.051425] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 87.066078] ata5.00: status: { DRDY } [ 87.069740] ata5.00: failed command: READ FPDMA QUEUED [ 87.074901] ata5.00: cmd 60/08:b8:08:80:52/00:00:00:00:00/40 tag 23 ncq 4096 in [ 87.074901] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 87.089553] ata5.00: status: { DRDY } [ 87.093214] ata5.00: failed command: READ FPDMA QUEUED [ 87.098389] ata5.00: cmd 60/08:c0:10:80:52/00:00:00:00:00/40 tag 24 ncq 4096 in [ 87.098389] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 87.113045] ata5.00: status: { DRDY } [ 87.116719] ata5.00: failed command: READ FPDMA QUEUED [ 87.121876] ata5.00: cmd 60/08:c8:18:80:52/00:00:00:00:00/40 tag 25 ncq 4096 in [ 87.121876] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 87.136528] ata5.00: status: { DRDY } [ 87.140190] ata5.00: failed command: READ FPDMA QUEUED [ 87.145368] ata5.00: cmd 60/08:d0:20:80:52/00:00:00:00:00/40 tag 26 ncq 4096 in [ 87.145368] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 87.160020] ata5.00: status: { DRDY } [ 87.163683] ata5.00: failed command: READ FPDMA QUEUED [ 87.168858] ata5.00: cmd 60/08:d8:28:80:52/00:00:00:00:00/40 tag 27 ncq 4096 in [ 87.168858] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 87.183513] ata5.00: status: { DRDY } [ 87.187187] ata5.00: failed command: READ FPDMA QUEUED [ 87.192343] ata5.00: cmd 60/08:e0:30:80:52/00:00:00:00:00/40 tag 28 ncq 4096 in [ 87.192343] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 87.206996] ata5.00: status: { DRDY } [ 87.210658] ata5.00: failed command: READ FPDMA QUEUED [ 87.215833] ata5.00: cmd 60/08:e8:38:80:52/00:00:00:00:00/40 tag 29 ncq 4096 in [ 87.215833] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 87.230487] ata5.00: status: { DRDY } [ 87.234150] ata5.00: failed command: READ FPDMA QUEUED [ 87.239326] ata5.00: cmd 60/08:f0:40:80:52/00:00:00:00:00/40 tag 30 ncq 4096 in [ 87.239326] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 87.253980] ata5.00: status: { DRDY } [ 87.257662] ata5: hard resetting link [ 87.765108] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 87.905159] ata5.00: configured for UDMA/133 [ 87.909437] ata5.00: device reported invalid CHS sector 0 [ 87.914827] ata5.00: device reported invalid CHS sector 0 [ 87.920241] ata5.00: device reported invalid CHS sector 0 [ 87.925649] ata5.00: device reported invalid CHS sector 0 [ 87.931034] ata5.00: device reported invalid CHS sector 0 [ 87.936442] ata5.00: device reported invalid CHS sector 0 [ 87.941834] ata5.00: device reported invalid CHS sector 0 [ 87.947242] ata5.00: device reported invalid CHS sector 0 [ 87.952634] ata5.00: device reported invalid CHS sector 0 [ 87.958041] ata5.00: device reported invalid CHS sector 0 [ 87.963434] ata5.00: device reported invalid CHS sector 0 [ 87.968843] ata5.00: device reported invalid CHS sector 0 [ 87.974234] ata5.00: device reported invalid CHS sector 0 [ 87.979642] ata5.00: device reported invalid CHS sector 0 [ 87.985034] ata5.00: device reported invalid CHS sector 0 [ 87.990441] ata5.00: device reported invalid CHS sector 0 [ 87.995848] ata5.00: device reported invalid CHS sector 0 [ 88.001234] ata5.00: device reported invalid CHS sector 0 [ 88.006642] ata5.00: device reported invalid CHS sector 0 [ 88.012034] ata5.00: device reported invalid CHS sector 0 [ 88.017442] ata5.00: device reported invalid CHS sector 0 [ 88.022835] ata5.00: device reported invalid CHS sector 0 [ 88.028242] ata5.00: device reported invalid CHS sector 0 [ 88.033634] ata5.00: device reported invalid CHS sector 0 [ 88.039043] ata5.00: device reported invalid CHS sector 0 [ 88.044433] ata5.00: device reported invalid CHS sector 0 [ 88.049842] ata5.00: device reported invalid CHS sector 0 [ 88.055248] ata5.00: device reported invalid CHS sector 0 [ 88.060634] ata5.00: device reported invalid CHS sector 0 [ 88.066041] ata5.00: device reported invalid CHS sector 0 [ 88.071434] ata5.00: device reported invalid CHS sector 0 [ 88.076914] ata5: EH complete [ 118.692669] ata5.00: exception Emask 0x0 SAct 0x7c0000 SErr 0x0 action 0x6 frozen [ 118.700167] ata5.00: failed command: READ FPDMA QUEUED [ 118.705342] ata5.00: cmd 60/08:90:b0:7f:52/00:00:00:00:00/40 tag 18 ncq 4096 in [ 118.705342] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 118.719996] ata5.00: status: { DRDY } [ 118.723659] ata5.00: failed command: READ FPDMA QUEUED [ 118.728833] ata5.00: cmd 60/08:98:a8:7f:52/00:00:00:00:00/40 tag 19 ncq 4096 in [ 118.728833] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 118.743488] ata5.00: status: { DRDY } [ 118.747163] ata5.00: failed command: READ FPDMA QUEUED [ 118.752320] ata5.00: cmd 60/08:a0:a0:7f:52/00:00:00:00:00/40 tag 20 ncq 4096 in [ 118.752320] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 118.766971] ata5.00: status: { DRDY } [ 118.770635] ata5.00: failed command: READ FPDMA QUEUED [ 118.775810] ata5.00: cmd 60/08:a8:98:7f:52/00:00:00:00:00/40 tag 21 ncq 4096 in [ 118.775810] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 118.790464] ata5.00: status: { DRDY } [ 118.794125] ata5.00: failed command: READ FPDMA QUEUED [ 118.799301] ata5.00: cmd 60/08:b0:90:7f:52/00:00:00:00:00/40 tag 22 ncq 4096 in [ 118.799301] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 118.813956] ata5.00: status: { DRDY } [ 118.817639] ata5: hard resetting link [ 119.325111] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 119.405165] ata5.00: configured for UDMA/133 [ 119.409443] ata5.00: device reported invalid CHS sector 0 [ 119.414832] ata5.00: device reported invalid CHS sector 0 [ 119.420246] ata5.00: device reported invalid CHS sector 0 [ 119.425646] ata5.00: device reported invalid CHS sector 0 [ 119.431030] ata5.00: device reported invalid CHS sector 0 [ 119.436461] ata5: EH complete [ 149.742727] ata5.00: NCQ disabled due to excessive errors [ 149.748151] ata5.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen [ 149.755809] ata5.00: failed command: READ FPDMA QUEUED [ 149.760971] ata5.00: cmd 60/08:00:60:7f:52/00:00:00:00:00/40 tag 0 ncq 4096 in [ 149.760971] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 149.775534] ata5.00: status: { DRDY } [ 149.779196] ata5.00: failed command: READ FPDMA QUEUED [ 149.784357] ata5.00: cmd 60/08:08:70:7e:52/00:00:00:00:00/40 tag 1 ncq 4096 in [ 149.784357] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 149.798924] ata5.00: status: { DRDY } [ 149.802584] ata5.00: failed command: READ FPDMA QUEUED [ 149.807757] ata5.00: cmd 60/08:10:78:7e:52/00:00:00:00:00/40 tag 2 ncq 4096 in [ 149.807757] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 149.822319] ata5.00: status: { DRDY } [ 149.825993] ata5.00: failed command: READ FPDMA QUEUED [ 149.831151] ata5.00: cmd 60/08:18:80:7e:52/00:00:00:00:00/40 tag 3 ncq 4096 in [ 149.831151] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 149.845717] ata5.00: status: { DRDY } [ 149.849379] ata5.00: failed command: READ FPDMA QUEUED [ 149.854540] ata5.00: cmd 60/08:20:88:7e:52/00:00:00:00:00/40 tag 4 ncq 4096 in [ 149.854540] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 149.869106] ata5.00: status: { DRDY }

continue...too many characters

by **b1gnas** » Sun Oct 04, 2015 8:10 pm

Code: Select all: [ 149.872767] ata5.00: failed command: READ FPDMA QUEUED [ 149.877940] ata5.00: cmd 60/08:28:90:7e:52/00:00:00:00:00/40 tag 5 ncq 4096 in [ 149.877940] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 149.892511] ata5.00: status: { DRDY } [ 149.896186] ata5.00: failed command: READ FPDMA QUEUED [ 149.901342] ata5.00: cmd 60/08:30:98:7e:52/00:00:00:00:00/40 tag 6 ncq 4096 in [ 149.901342] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 149.915908] ata5.00: status: { DRDY } [ 149.919570] ata5.00: failed command: READ FPDMA QUEUED [ 149.924731] ata5.00: cmd 60/08:38:a0:7e:52/00:00:00:00:00/40 tag 7 ncq 4096 in [ 149.924731] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 149.939298] ata5.00: status: { DRDY } [ 149.942958] ata5.00: failed command: READ FPDMA QUEUED [ 149.948133] ata5.00: cmd 60/08:40:a8:7e:52/00:00:00:00:00/40 tag 8 ncq 4096 in [ 149.948133] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 149.962703] ata5.00: status: { DRDY } [ 149.966377] ata5.00: failed command: READ FPDMA QUEUED [ 149.971534] ata5.00: cmd 60/08:48:b0:7e:52/00:00:00:00:00/40 tag 9 ncq 4096 in [ 149.971534] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 149.986100] ata5.00: status: { DRDY } [ 149.989762] ata5.00: failed command: READ FPDMA QUEUED [ 149.994923] ata5.00: cmd 60/08:50:b8:7e:52/00:00:00:00:00/40 tag 10 ncq 4096 in [ 149.994923] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.009574] ata5.00: status: { DRDY } [ 150.013236] ata5.00: failed command: READ FPDMA QUEUED [ 150.018412] ata5.00: cmd 60/08:58:c0:7e:52/00:00:00:00:00/40 tag 11 ncq 4096 in [ 150.018412] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.033067] ata5.00: status: { DRDY } [ 150.036741] ata5.00: failed command: READ FPDMA QUEUED [ 150.041898] ata5.00: cmd 60/08:60:c8:7e:52/00:00:00:00:00/40 tag 12 ncq 4096 in [ 150.041898] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.056550] ata5.00: status: { DRDY } [ 150.060212] ata5.00: failed command: READ FPDMA QUEUED [ 150.065387] ata5.00: cmd 60/08:68:d0:7e:52/00:00:00:00:00/40 tag 13 ncq 4096 in [ 150.065387] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.080044] ata5.00: status: { DRDY } [ 150.083705] ata5.00: failed command: READ FPDMA QUEUED [ 150.088879] ata5.00: cmd 60/08:70:d8:7e:52/00:00:00:00:00/40 tag 14 ncq 4096 in [ 150.088879] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.103534] ata5.00: status: { DRDY } [ 150.107209] ata5.00: failed command: READ FPDMA QUEUED [ 150.112366] ata5.00: cmd 60/08:78:e0:7e:52/00:00:00:00:00/40 tag 15 ncq 4096 in [ 150.112366] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.127018] ata5.00: status: { DRDY } [ 150.130680] ata5.00: failed command: READ FPDMA QUEUED [ 150.135856] ata5.00: cmd 60/08:80:e8:7e:52/00:00:00:00:00/40 tag 16 ncq 4096 in [ 150.135856] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.150511] ata5.00: status: { DRDY } [ 150.154172] ata5.00: failed command: READ FPDMA QUEUED [ 150.159348] ata5.00: cmd 60/08:88:f0:7e:52/00:00:00:00:00/40 tag 17 ncq 4096 in [ 150.159348] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.174002] ata5.00: status: { DRDY } [ 150.177676] ata5.00: failed command: READ FPDMA QUEUED [ 150.182835] ata5.00: cmd 60/08:90:f8:7e:52/00:00:00:00:00/40 tag 18 ncq 4096 in [ 150.182835] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.197486] ata5.00: status: { DRDY } [ 150.201148] ata5.00: failed command: READ FPDMA QUEUED [ 150.206323] ata5.00: cmd 60/08:98:00:7f:52/00:00:00:00:00/40 tag 19 ncq 4096 in [ 150.206323] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.220977] ata5.00: status: { DRDY } [ 150.224640] ata5.00: failed command: READ FPDMA QUEUED [ 150.229815] ata5.00: cmd 60/08:a0:08:7f:52/00:00:00:00:00/40 tag 20 ncq 4096 in [ 150.229815] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.244471] ata5.00: status: { DRDY } [ 150.248148] ata5.00: failed command: READ FPDMA QUEUED [ 150.253310] ata5.00: cmd 60/08:a8:10:7f:52/00:00:00:00:00/40 tag 21 ncq 4096 in [ 150.253310] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.267963] ata5.00: status: { DRDY } [ 150.271623] ata5.00: failed command: READ FPDMA QUEUED [ 150.276799] ata5.00: cmd 60/08:b0:18:7f:52/00:00:00:00:00/40 tag 22 ncq 4096 in [ 150.276799] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.291455] ata5.00: status: { DRDY } [ 150.295129] ata5.00: failed command: READ FPDMA QUEUED [ 150.300285] ata5.00: cmd 60/08:b8:20:7f:52/00:00:00:00:00/40 tag 23 ncq 4096 in [ 150.300285] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.314941] ata5.00: status: { DRDY } [ 150.318614] ata5.00: failed command: READ FPDMA QUEUED [ 150.323770] ata5.00: cmd 60/08:c0:28:7f:52/00:00:00:00:00/40 tag 24 ncq 4096 in [ 150.323770] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.338421] ata5.00: status: { DRDY } [ 150.342084] ata5.00: failed command: READ FPDMA QUEUED [ 150.347258] ata5.00: cmd 60/08:c8:30:7f:52/00:00:00:00:00/40 tag 25 ncq 4096 in [ 150.347258] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.361914] ata5.00: status: { DRDY } [ 150.365588] ata5.00: failed command: READ FPDMA QUEUED [ 150.370745] ata5.00: cmd 60/08:d0:38:7f:52/00:00:00:00:00/40 tag 26 ncq 4096 in [ 150.370745] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.385397] ata5.00: status: { DRDY } [ 150.389059] ata5.00: failed command: READ FPDMA QUEUED [ 150.394220] ata5.00: cmd 60/08:d8:40:7f:52/00:00:00:00:00/40 tag 27 ncq 4096 in [ 150.394220] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.408872] ata5.00: status: { DRDY } [ 150.412534] ata5.00: failed command: READ FPDMA QUEUED [ 150.417715] ata5.00: cmd 60/08:e0:48:7f:52/00:00:00:00:00/40 tag 28 ncq 4096 in [ 150.417715] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.432365] ata5.00: status: { DRDY } [ 150.436039] ata5.00: failed command: READ FPDMA QUEUED [ 150.441196] ata5.00: cmd 60/08:e8:50:7f:52/00:00:00:00:00/40 tag 29 ncq 4096 in [ 150.441196] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.455848] ata5.00: status: { DRDY } [ 150.459510] ata5.00: failed command: READ FPDMA QUEUED [ 150.464670] ata5.00: cmd 60/08:f0:58:7f:52/00:00:00:00:00/40 tag 30 ncq 4096 in [ 150.464670] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 150.479323] ata5.00: status: { DRDY } [ 150.482993] ata5: hard resetting link [ 150.995119] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 151.595173] ata5.00: configured for UDMA/133 [ 151.599456] ata5.00: device reported invalid CHS sector 0 [ 151.604846] ata5.00: device reported invalid CHS sector 0 [ 151.610260] ata5.00: device reported invalid CHS sector 0 [ 151.615669] ata5.00: device reported invalid CHS sector 0 [ 151.621054] ata5.00: device reported invalid CHS sector 0 [ 151.626461] ata5.00: device reported invalid CHS sector 0 [ 151.631853] ata5.00: device reported invalid CHS sector 0 [ 151.637262] ata5.00: device reported invalid CHS sector 0 [ 151.642653] ata5.00: device reported invalid CHS sector 0 [ 151.648063] ata5.00: device reported invalid CHS sector 0 [ 151.653453] ata5.00: device reported invalid CHS sector 0 [ 151.658863] ata5.00: device reported invalid CHS sector 0 [ 151.664252] ata5.00: device reported invalid CHS sector 0 [ 151.669661] ata5.00: device reported invalid CHS sector 0 [ 151.675054] ata5.00: device reported invalid CHS sector 0 [ 151.680461] ata5.00: device reported invalid CHS sector 0 [ 151.685869] ata5.00: device reported invalid CHS sector 0 [ 151.691262] ata5.00: device reported invalid CHS sector 0 [ 151.696670] ata5.00: device reported invalid CHS sector 0 [ 151.702062] ata5.00: device reported invalid CHS sector 0 [ 151.707471] ata5.00: device reported invalid CHS sector 0 [ 151.712861] ata5.00: device reported invalid CHS sector 0 [ 151.718270] ata5.00: device reported invalid CHS sector 0 [ 151.723663] ata5.00: device reported invalid CHS sector 0 [ 151.729070] ata5.00: device reported invalid CHS sector 0 [ 151.734462] ata5.00: device reported invalid CHS sector 0 [ 151.739870] ata5.00: device reported invalid CHS sector 0 [ 151.745277] ata5.00: device reported invalid CHS sector 0 [ 151.750662] ata5.00: device reported invalid CHS sector 0 [ 151.756070] ata5.00: device reported invalid CHS sector 0 [ 151.761462] ata5.00: device reported invalid CHS sector 0 [ 151.766941] ata5: EH complete [ 151.818799] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6 frozen [ 151.826300] ata5.00: edma_err_cause=04000000 pp_flags=00000001 [ 151.832123] ata5: SError: { Handshk } [ 151.835807] ata5.00: failed command: WRITE DMA [ 151.840274] ata5.00: cmd ca/00:10:d8:5d:52/00:00:00:00:00/e0 tag 0 dma 8192 out [ 151.840274] res 51/84:01:e7:5d:52/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 151.855528] ata5.00: status: { DRDY ERR } [ 151.859532] ata5.00: error: { ICRC ABRT } [ 151.863553] ata5: hard resetting link [ 152.375116] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 152.475170] ata5.00: configured for UDMA/133 [ 152.479468] ata5: EH complete [ 152.501027] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6 frozen [ 152.508513] ata5.00: edma_err_cause=04000000 pp_flags=00000001 [ 152.514338] ata5: SError: { Handshk } [ 152.518021] ata5.00: failed command: WRITE DMA [ 152.522489] ata5.00: cmd ca/00:08:20:5f:52/00:00:00:00:00/e0 tag 0 dma 4096 out [ 152.522489] res 51/84:01:27:5f:52/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 152.537748] ata5.00: status: { DRDY ERR } [ 152.541754] ata5.00: error: { ICRC ABRT } [ 152.545789] ata5: hard resetting link [ 153.055115] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 153.155170] ata5.00: configured for UDMA/133 [ 153.159469] ata5: EH complete [ 153.180342] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6 frozen [ 153.187829] ata5.00: edma_err_cause=04000000 pp_flags=00000001 [ 153.193656] ata5: SError: { Handshk } [ 153.197336] ata5.00: failed command: WRITE DMA [ 153.201808] ata5.00: cmd ca/00:08:20:5f:52/00:00:00:00:00/e0 tag 0 dma 4096 out [ 153.201808] res 51/84:01:27:5f:52/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 153.217062] ata5.00: status: { DRDY ERR } [ 153.221066] ata5.00: error: { ICRC ABRT } [ 153.225099] ata5: hard resetting link [ 153.735115] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 153.835171] ata5.00: configured for UDMA/133 [ 153.839469] ata5: EH complete [ 153.860351] ata5: limiting SATA link speed to 1.5 Gbps [ 153.865510] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6 frozen [ 153.872970] ata5.00: edma_err_cause=04000000 pp_flags=00000001 [ 153.878815] ata5: SError: { Handshk } [ 153.882480] ata5.00: failed command: WRITE DMA [ 153.886965] ata5.00: cmd ca/00:08:20:5f:52/00:00:00:00:00/e0 tag 0 dma 4096 out [ 153.886965] res 51/84:01:27:5f:52/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 153.902223] ata5.00: status: { DRDY ERR } [ 153.906239] ata5.00: error: { ICRC ABRT } [ 153.910263] ata5: hard resetting link [ 154.415120] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 154.515171] ata5.00: configured for UDMA/133 [ 154.519467] ata5: EH complete [ 154.805182] random: nonblocking pool is initialized [ 154.845335] kjournald starting. Commit interval 5 seconds [ 154.905636] EXT3-fs (sda7): recovery complete [ 154.909988] EXT3-fs (sda7): mounted filesystem with ordered data mode [ 154.916479] VFS: Mounted root (ext3 filesystem) readonly on device 8:71. [ 154.924043] Freeing unused kernel memory: 112K (c039b000 - c03b7000) [ 155.183651] EXT3-fs (sda7): warning: checktime reached, running e2fsck is recommended [ 155.191958] EXT3-fs (sda7): using internal journal [ 156.565327] kjournald starting. Commit interval 5 seconds [ 156.570859] EXT3-fs (sda1): warning: checktime reached, running e2fsck is recommended [ 156.579117] EXT3-fs (sda1): using internal journal [ 156.635206] EXT3-fs (sda1): recovery complete [ 156.639560] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 158.685327] kjournald starting. Commit interval 5 seconds [ 158.690868] EXT3-fs (sda5): warning: checktime reached, running e2fsck is recommended [ 158.699170] EXT3-fs (sda5): using internal journal [ 158.775201] EXT3-fs (sda5): recovery complete [ 158.779559] EXT3-fs (sda5): mounted filesystem with ordered data mode [ 158.954154] Adding 514076k swap on /dev/sda3. Priority:-1 extents:1 across:514076k [ 160.806641] NTFS driver 2.1.30 [Flags: R/W MODULE]. [ 160.842752] fuse init (API version 7.22) [ 160.874929] usbcore: registered new interface driver usblp [ 160.922478] RPC: Registered named UNIX socket transport module. [ 160.928420] RPC: Registered udp transport module. [ 160.933108] RPC: Registered tcp transport module. [ 160.937812] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 161.037839] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 161.113543] Loading iSCSI transport class v2.0-870. [ 161.129826] iscsi: registered transport (tcp) [ 161.186361] Linux video capture interface: v2.00 [ 161.294886] uvcvideo: Unable to create debugfs directory [ 161.300407] usbcore: registered new interface driver uvcvideo [ 161.306154] USB Video Class driver (1.1.1) [ 161.348633] md: raid0 personality registered for level 0 [ 161.383095] md: raid1 personality registered for level 1 [ 161.586556] raid6: int32x1 24 MB/s [ 161.756571] raid6: int32x2 37 MB/s [ 161.925917] raid6: int32x4 46 MB/s [ 162.095538] raid6: int32x8 57 MB/s [ 162.099285] raid6: using algorithm int32x8 (57 MB/s) [ 162.104235] raid6: using intx1 recovery algorithm [ 162.113985] async_tx: api initialized (async) [ 162.120594] xor: measuring software checksum speed [ 162.225080] arm4regs : 429.600 MB/sec [ 162.325072] 8regs : 337.600 MB/sec [ 162.425072] 32regs : 497.600 MB/sec [ 162.429248] xor: using function: 32regs (497.600 MB/sec) [ 162.451705] md: raid6 personality registered for level 6 [ 162.457046] md: raid5 personality registered for level 5 [ 162.462337] md: raid4 personality registered for level 4 [ 162.498382] md: raid10 personality registered for level 10 [ 176.049341] md: bind<sdc8> [ 176.052683] md: bind<sdd8> [ 176.056068] md: bind<sde8> [ 176.059348] md: bind<sda8> [ 176.062692] md: bind<sdb8> [ 176.076969] md/raid:md0: device sdb8 operational as raid disk 0 [ 176.082878] md/raid:md0: device sda8 operational as raid disk 4 [ 176.088814] md/raid:md0: device sde8 operational as raid disk 3 [ 176.094722] md/raid:md0: device sdd8 operational as raid disk 2 [ 176.100639] md/raid:md0: device sdc8 operational as raid disk 1 [ 176.109487] md/raid:md0: allocated 0kB [ 176.113385] md/raid:md0: raid level 5 active with 5 out of 5 devices, algorithm 2 [ 176.120873] RAID conf printout: [ 176.120893] --- level:5 rd:5 wd:5 [ 176.120913] disk 0, o:1, dev:sdb8 [ 176.120933] disk 1, o:1, dev:sdc8 [ 176.120953] disk 2, o:1, dev:sdd8 [ 176.120972] disk 3, o:1, dev:sde8 [ 176.120992] disk 4, o:1, dev:sda8 [ 176.121336] md0: detected capacity change from 0 to 3987352059904 [ 176.129187] md0: unknown partition table [ 186.195529] ata4.00: exception Emask 0x10 SAct 0x1 SErr 0x1000000 action 0x6 frozen [ 186.220891] ata4.00: edma_err_cause=00000020 pp_flags=00000003, SError=01000000 [ 186.228227] ata4: SError: { TrStaTrns } [ 186.232069] ata4.00: failed command: READ FPDMA QUEUED [ 186.237244] ata4.00: cmd 60/00:00:98:03:64/01:00:00:00:00/40 tag 0 ncq 131072 in [ 186.237244] res 40/00:00:98:03:64/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 186.252587] ata4.00: status: { DRDY } [ 186.256281] ata4: hard resetting link [ 186.260468] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x1000000 action 0x6 frozen [ 186.268131] ata2.00: edma_err_cause=00000020 pp_flags=00000003, SError=01000000 [ 186.275440] ata2: SError: { TrStaTrns } [ 186.279275] ata2.00: failed command: READ FPDMA QUEUED [ 186.284436] ata2.00: cmd 60/00:00:98:03:64/01:00:00:00:00/40 tag 0 ncq 131072 in [ 186.284436] res 40/00:00:98:03:64/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 186.299780] ata2.00: status: { DRDY } [ 186.303453] ata2: hard resetting link [ 186.795126] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 186.815124] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 186.875943] ata4.00: configured for UDMA/133 [ 186.880254] ata4: EH complete [ 186.884689] ata2.00: configured for UDMA/133 [ 186.889026] ata2: EH complete [ 218.162670] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 218.169736] ata1.00: failed command: READ FPDMA QUEUED [ 218.174902] ata1.00: cmd 60/08:00:a8:03:64/00:00:00:00:00/40 tag 0 ncq 4096 in [ 218.174902] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 218.189465] ata1.00: status: { DRDY } [ 218.193143] ata1: hard resetting link [ 218.705150] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 218.785185] ata1.00: configured for UDMA/133 [ 218.789493] ata1: EH complete [ 250.132734] ata4.00: exception Emask 0x0 SAct 0x300 SErr 0x0 action 0x6 frozen [ 250.139968] ata4.00: failed command: READ FPDMA QUEUED [ 250.145146] ata4.00: cmd 60/08:40:58:2b:e7/00:00:2b:00:00/40 tag 8 ncq 4096 in [ 250.145146] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.159712] ata4.00: status: { DRDY } [ 250.163373] ata4.00: failed command: READ FPDMA QUEUED [ 250.168549] ata4.00: cmd 60/08:48:60:2b:e7/00:00:2b:00:00/40 tag 9 ncq 4096 in [ 250.168549] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.183118] ata4.00: status: { DRDY } [ 250.186807] ata4: hard resetting link [ 250.208471] ata3.00: exception Emask 0x0 SAct 0x3fff SErr 0x0 action 0x6 frozen [ 250.215785] ata3.00: failed command: READ FPDMA QUEUED [ 250.220946] ata3.00: cmd 60/08:00:28:2b:e7/00:00:2b:00:00/40 tag 0 ncq 4096 in [ 250.220946] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.235513] ata3.00: status: { DRDY } [ 250.239172] ata3.00: failed command: READ FPDMA QUEUED [ 250.244332] ata3.00: cmd 60/08:08:30:2b:e7/00:00:2b:00:00/40 tag 1 ncq 4096 in [ 250.244332] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.258899] ata3.00: status: { DRDY } [ 250.262560] ata3.00: failed command: READ FPDMA QUEUED [ 250.267734] ata3.00: cmd 60/08:10:38:2b:e7/00:00:2b:00:00/40 tag 2 ncq 4096 in [ 250.267734] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.282304] ata3.00: status: { DRDY } [ 250.285979] ata3.00: failed command: READ FPDMA QUEUED [ 250.291136] ata3.00: cmd 60/08:18:40:2b:e7/00:00:2b:00:00/40 tag 3 ncq 4096 in [ 250.291136] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.305703] ata3.00: status: { DRDY } [ 250.309363] ata3.00: failed command: READ FPDMA QUEUED [ 250.314524] ata3.00: cmd 60/08:20:48:2b:e7/00:00:2b:00:00/40 tag 4 ncq 4096 in [ 250.314524] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.329091] ata3.00: status: { DRDY } [ 250.332752] ata3.00: failed command: READ FPDMA QUEUED [ 250.337925] ata3.00: cmd 60/08:28:50:2b:e7/00:00:2b:00:00/40 tag 5 ncq 4096 in [ 250.337925] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.352496] ata3.00: status: { DRDY } [ 250.356171] ata3.00: failed command: READ FPDMA QUEUED [ 250.361327] ata3.00: cmd 60/08:30:58:2b:e7/00:00:2b:00:00/40 tag 6 ncq 4096 in [ 250.361327] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.375893] ata3.00: status: { DRDY } [ 250.379555] ata3.00: failed command: READ FPDMA QUEUED [ 250.384715] ata3.00: cmd 60/08:38:60:2b:e7/00:00:2b:00:00/40 tag 7 ncq 4096 in [ 250.384715] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.399283] ata3.00: status: { DRDY } [ 250.402943] ata3.00: failed command: READ FPDMA QUEUED [ 250.408116] ata3.00: cmd 60/08:40:68:2b:e7/00:00:2b:00:00/40 tag 8 ncq 4096 in [ 250.408116] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.422688] ata3.00: status: { DRDY } [ 250.426361] ata3.00: failed command: READ FPDMA QUEUED [ 250.431518] ata3.00: cmd 60/08:48:70:2b:e7/00:00:2b:00:00/40 tag 9 ncq 4096 in [ 250.431518] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.446085] ata3.00: status: { DRDY } [ 250.449746] ata3.00: failed command: READ FPDMA QUEUED [ 250.454907] ata3.00: cmd 60/08:50:78:2b:e7/00:00:2b:00:00/40 tag 10 ncq 4096 in [ 250.454907] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.469560] ata3.00: status: { DRDY } [ 250.473221] ata3.00: failed command: READ FPDMA QUEUED [ 250.478397] ata3.00: cmd 60/08:58:80:2b:e7/00:00:2b:00:00/40 tag 11 ncq 4096 in [ 250.478397] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.493052] ata3.00: status: { DRDY } [ 250.496726] ata3.00: failed command: READ FPDMA QUEUED [ 250.501883] ata3.00: cmd 60/08:60:88:2b:e7/00:00:2b:00:00/40 tag 12 ncq 4096 in [ 250.501883] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.516535] ata3.00: status: { DRDY } [ 250.520197] ata3.00: failed command: READ FPDMA QUEUED [ 250.525373] ata3.00: cmd 60/08:68:90:2b:e7/00:00:2b:00:00/40 tag 13 ncq 4096 in [ 250.525373] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 250.540027] ata3.00: status: { DRDY } [ 250.543699] ata3: hard resetting link [ 251.035136] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 251.055137] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 251.115199] ata4.00: configured for UDMA/133 [ 251.119478] ata4.00: device reported invalid CHS sector 0 [ 251.124867] ata4.00: device reported invalid CHS sector 0 [ 251.130301] ata4: EH complete [ 251.145203] ata3.00: configured for UDMA/133 [ 251.149490] ata3.00: device reported invalid CHS sector 0 [ 251.154960] ata3.00: device reported invalid CHS sector 0 [ 251.160439] ata3.00: device reported invalid CHS sector 0 [ 251.165848] ata3.00: device reported invalid CHS sector 0 [ 251.171238] ata3.00: device reported invalid CHS sector 0 [ 251.176648] ata3.00: device reported invalid CHS sector 0 [ 251.182038] ata3.00: device reported invalid CHS sector 0 [ 251.187446] ata3.00: device reported invalid CHS sector 0 [ 251.192837] ata3.00: device reported invalid CHS sector 0 [ 251.198247] ata3.00: device reported invalid CHS sector 0 [ 251.203637] ata3.00: device reported invalid CHS sector 0 [ 251.209045] ata3.00: device reported invalid CHS sector 0 [ 251.214437] ata3.00: device reported invalid CHS sector 0 [ 251.219879] ata3: EH complete [ 281.272730] ata4.00: exception Emask 0x0 SAct 0x1f SErr 0x0 action 0x6 frozen [ 281.279882] ata4.00: failed command: READ FPDMA QUEUED [ 281.285048] ata4.00: cmd 60/08:00:b8:2b:e7/00:00:2b:00:00/40 tag 0 ncq 4096 in [ 281.285048] res 40/00:00:98:03:64/00:00:00:00:00/40 Emask 0x4 (timeout) [ 281.299612] ata4.00: status: { DRDY } [ 281.303273] ata4.00: failed command: READ FPDMA QUEUED [ 281.308449] ata4.00: cmd 60/08:08:c0:2b:e7/00:00:2b:00:00/40 tag 1 ncq 4096 in [ 281.308449] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 281.323017] ata4.00: status: { DRDY } [ 281.326692] ata4.00: failed command: READ FPDMA QUEUED [ 281.331847] ata4.00: cmd 60/08:10:a8:2b:e7/00:00:2b:00:00/40 tag 2 ncq 4096 in [ 281.331847] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 281.346415] ata4.00: status: { DRDY } [ 281.350075] ata4.00: failed command: READ FPDMA QUEUED [ 281.355251] ata4.00: cmd 60/08:18:b0:2b:e7/00:00:2b:00:00/40 tag 3 ncq 4096 in [ 281.355251] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 281.369820] ata4.00: status: { DRDY } [ 281.373481] ata4.00: failed command: READ FPDMA QUEUED [ 281.378658] ata4.00: cmd 60/08:20:c8:2b:e7/00:00:2b:00:00/40 tag 4 ncq 4096 in [ 281.378658] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 281.393225] ata4.00: status: { DRDY } [ 281.396915] ata4: hard resetting link [ 281.418577] ata3.00: exception Emask 0x0 SAct 0x7be SErr 0x0 action 0x6 frozen [ 281.425807] ata3.00: failed command: READ FPDMA QUEUED [ 281.430966] ata3.00: cmd 60/08:08:88:2b:e7/00:00:2b:00:00/40 tag 1 ncq 4096 in [ 281.430966] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 281.445533] ata3.00: status: { DRDY } [ 281.449194] ata3.00: failed command: READ FPDMA QUEUED [ 281.454354] ata3.00: cmd 60/08:10:80:2b:e7/00:00:2b:00:00/40 tag 2 ncq 4096 in [ 281.454354] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 281.468921] ata3.00: status: { DRDY } [ 281.472582] ata3.00: failed command: READ FPDMA QUEUED [ 281.477763] ata3.00: cmd 60/08:18:78:2b:e7/00:00:2b:00:00/40 tag 3 ncq 4096 in [ 281.477763] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 281.492327] ata3.00: status: { DRDY } [ 281.496001] ata3.00: failed command: READ FPDMA QUEUED [ 281.501156] ata3.00: cmd 60/08:20:70:2b:e7/00:00:2b:00:00/40 tag 4 ncq 4096 in [ 281.501156] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 281.515724] ata3.00: status: { DRDY } [ 281.519385] ata3.00: failed command: READ FPDMA QUEUED [ 281.524546] ata3.00: cmd 60/08:28:68:2b:e7/00:00:2b:00:00/40 tag 5 ncq 4096 in [ 281.524546] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 281.539112] ata3.00: status: { DRDY } [ 281.542773] ata3.00: failed command: READ FPDMA QUEUED [ 281.547947] ata3.00: cmd 60/08:38:58:2b:e7/00:00:2b:00:00/40 tag 7 ncq 4096 in [ 281.547947] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 281.562518] ata3.00: status: { DRDY } [ 281.566193] ata3.00: failed command: READ FPDMA QUEUED [ 281.571348] ata3.00: cmd 60/08:40:50:2b:e7/00:00:2b:00:00/40 tag 8 ncq 4096 in [ 281.571348] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 281.585915] ata3.00: status: { DRDY } [ 281.589576] ata3.00: failed command: READ FPDMA QUEUED [ 281.594737] ata3.00: cmd 60/08:48:48:2b:e7/00:00:2b:00:00/40 tag 9 ncq 4096 in [ 281.594737] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 281.609304] ata3.00: status: { DRDY } [ 281.612964] ata3.00: failed command: READ FPDMA QUEUED [ 281.618138] ata3.00: cmd 60/08:50:40:2b:e7/00:00:2b:00:00/40 tag 10 ncq 4096 in [ 281.618138] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 281.632795] ata3.00: status: { DRDY } [ 281.636480] ata3: hard resetting link [ 282.125144] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 282.145145] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 282.185694] ata4.00: configured for UDMA/133 [ 282.189976] ata4.00: device reported invalid CHS sector 0 [ 282.195399] ata4.00: device reported invalid CHS sector 0 [ 282.200785] ata4.00: device reported invalid CHS sector 0 [ 282.206203] ata4.00: device reported invalid CHS sector 0 [ 282.211617] ata4: EH complete [ 282.385206] ata3.00: configured for UDMA/133 [ 282.389486] ata3.00: device reported invalid CHS sector 0 [ 282.394876] ata3.00: device reported invalid CHS sector 0 [ 282.400292] ata3.00: device reported invalid CHS sector 0 [ 282.405700] ata3.00: device reported invalid CHS sector 0 [ 282.411093] ata3.00: device reported invalid CHS sector 0 [ 282.416502] ata3.00: device reported invalid CHS sector 0 [ 282.421892] ata3.00: device reported invalid CHS sector 0 [ 282.427300] ata3.00: device reported invalid CHS sector 0 [ 282.432693] ata3.00: device reported invalid CHS sector 0 [ 282.438132] ata3: EH complete [ 312.402712] ata4: limiting SATA link speed to 1.5 Gbps [ 312.407876] ata4.00: exception Emask 0x0 SAct 0x1ff SErr 0x0 action 0x6 frozen [ 312.415086] ata4.00: failed command: READ FPDMA QUEUED [ 312.420264] ata4.00: cmd 60/08:00:d0:2b:e7/00:00:2b:00:00/40 tag 0 ncq 4096 in [ 312.420264] res 40/00:00:98:03:64/00:00:00:00:00/40 Emask 0x4 (timeout) [ 312.434827] ata4.00: status: { DRDY } [ 312.438504] ata4.00: failed command: READ FPDMA QUEUED [ 312.443667] ata4.00: cmd 60/08:08:d8:2b:e7/00:00:2b:00:00/40 tag 1 ncq 4096 in [ 312.443667] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 312.458233] ata4.00: status: { DRDY } [ 312.461895] ata4.00: failed command: READ FPDMA QUEUED [ 312.467067] ata4.00: cmd 60/08:10:e0:2b:e7/00:00:2b:00:00/40 tag 2 ncq 4096 in [ 312.467067] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 312.481630] ata4.00: status: { DRDY } [ 312.485304] ata4.00: failed command: READ FPDMA QUEUED [ 312.490461] ata4.00: cmd 60/08:18:e8:2b:e7/00:00:2b:00:00/40 tag 3 ncq 4096 in [ 312.490461] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 312.505026] ata4.00: status: { DRDY } [ 312.508704] ata4.00: failed command: READ FPDMA QUEUED [ 312.513868] ata4.00: cmd 60/08:20:f0:2b:e7/00:00:2b:00:00/40 tag 4 ncq 4096 in [ 312.513868] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 312.528432] ata4.00: status: { DRDY } [ 312.532094] ata4.00: failed command: READ FPDMA QUEUED [ 312.537267] ata4.00: cmd 60/08:28:f8:2b:e7/00:00:2b:00:00/40 tag 5 ncq 4096 in [ 312.537267] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 312.551830] ata4.00: status: { DRDY } [ 312.555504] ata4.00: failed command: READ FPDMA QUEUED [ 312.560660] ata4.00: cmd 60/08:30:00:2c:e7/00:00:2b:00:00/40 tag 6 ncq 4096 in [ 312.560660] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 312.575227] ata4.00: status: { DRDY } [ 312.578890] ata4.00: failed command: READ FPDMA QUEUED [ 312.584049] ata4.00: cmd 60/08:38:08:2c:e7/00:00:2b:00:00/40 tag 7 ncq 4096 in [ 312.584049] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 312.598616] ata4.00: status: { DRDY } [ 312.602277] ata4.00: failed command: READ FPDMA QUEUED [ 312.607450] ata4.00: cmd 60/08:40:10:2c:e7/00:00:2b:00:00/40 tag 8 ncq 4096 in [ 312.607450] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 312.622013] ata4.00: status: { DRDY } [ 312.625701] ata4: hard resetting link [ 313.135148] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 313.215204] ata4.00: configured for UDMA/133 [ 313.219490] ata4.00: device reported invalid CHS sector 0 [ 313.224875] ata4.00: device reported invalid CHS sector 0 [ 313.230289] ata4.00: device reported invalid CHS sector 0 [ 313.235690] ata4.00: device reported invalid CHS sector 0 [ 313.241074] ata4.00: device reported invalid CHS sector 0 [ 313.246482] ata4.00: device reported invalid CHS sector 0 [ 313.251874] ata4.00: device reported invalid CHS sector 0 [ 313.257283] ata4.00: device reported invalid CHS sector 0 [ 313.262705] ata4: EH complete [ 343.402703] ata2.00: exception Emask 0x0 SAct 0x6 SErr 0x0 action 0x6 frozen [ 343.409768] ata2.00: failed command: READ FPDMA QUEUED [ 343.414935] ata2.00: cmd 60/08:08:88:2c:e7/00:00:2b:00:00/40 tag 1 ncq 4096 in [ 343.414935] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 343.429498] ata2.00: status: { DRDY } [ 343.433158] ata2.00: failed command: READ FPDMA QUEUED [ 343.438334] ata2.00: cmd 60/08:10:90:2c:e7/00:00:2b:00:00/40 tag 2 ncq 4096 in [ 343.438334] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 343.452902] ata2.00: status: { DRDY } [ 343.456592] ata2: hard resetting link [ 343.965155] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 344.045211] ata2.00: configured for UDMA/133 [ 344.049495] ata2.00: device reported invalid CHS sector 0 [ 344.054885] ata2.00: device reported invalid CHS sector 0 [ 344.060318] ata2: EH complete [ 374.372741] ata3.00: exception Emask 0x0 SAct 0x3fff SErr 0x0 action 0x6 frozen [ 374.380062] ata3.00: failed command: READ FPDMA QUEUED [ 374.385233] ata3.00: cmd 60/08:00:a8:2c:e7/00:00:2b:00:00/40 tag 0 ncq 4096 in [ 374.385233] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 374.399802] ata3.00: status: { DRDY } [ 374.403462] ata3.00: failed command: READ FPDMA QUEUED [ 374.408638] ata3.00: cmd 60/08:08:b8:2c:e7/00:00:2b:00:00/40 tag 1 ncq 4096 in [ 374.408638] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 374.423206] ata3.00: status: { DRDY } [ 374.426880] ata3.00: failed command: READ FPDMA QUEUED [ 374.432038] ata3.00: cmd 60/08:10:b0:2c:e7/00:00:2b:00:00/40 tag 2 ncq 4096 in [ 374.432038] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 374.446604] ata3.00: status: { DRDY } [ 374.450266] ata3.00: failed command: READ FPDMA QUEUED [ 374.455440] ata3.00: cmd 60/08:18:c0:2c:e7/00:00:2b:00:00/40 tag 3 ncq 4096 in [ 374.455440] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 374.470009] ata3.00: status: { DRDY } [ 374.473672] ata3.00: failed command: READ FPDMA QUEUED [ 374.478846] ata3.00: cmd 60/08:20:c8:2c:e7/00:00:2b:00:00/40 tag 4 ncq 4096 in [ 374.478846] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 374.493415] ata3.00: status: { DRDY } [ 374.497090] ata3.00: failed command: READ FPDMA QUEUED [ 374.502246] ata3.00: cmd 60/08:28:d0:2c:e7/00:00:2b:00:00/40 tag 5 ncq 4096 in [ 374.502246] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 374.516812] ata3.00: status: { DRDY } [ 374.520474] ata3.00: failed command: READ FPDMA QUEUED [ 374.525649] ata3.00: cmd 60/08:30:d8:2c:e7/00:00:2b:00:00/40 tag 6 ncq 4096 in [ 374.525649] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 374.540218] ata3.00: status: { DRDY } [ 374.543880] ata3.00: failed command: READ FPDMA QUEUED [ 374.549055] ata3.00: cmd 60/08:38:e0:2c:e7/00:00:2b:00:00/40 tag 7 ncq 4096 in [ 374.549055] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 374.563624] ata3.00: status: { DRDY } [ 374.567298] ata3.00: failed command: READ FPDMA QUEUED [ 374.572455] ata3.00: cmd 60/08:40:e8:2c:e7/00:00:2b:00:00/40 tag 8 ncq 4096 in [ 374.572455] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 374.587021] ata3.00: status: { DRDY } [ 374.590683] ata3.00: failed command: READ FPDMA QUEUED [ 374.595858] ata3.00: cmd 60/08:48:f0:2c:e7/00:00:2b:00:00/40 tag 9 ncq 4096 in [ 374.595858] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 374.610426] ata3.00: status: { DRDY } [ 374.614088] ata3.00: failed command: READ FPDMA QUEUED [ 374.619263] ata3.00: cmd 60/08:50:f8:2c:e7/00:00:2b:00:00/40 tag 10 ncq 4096 in [ 374.619263] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 374.633919] ata3.00: status: { DRDY } [ 374.637593] ata3.00: failed command: READ FPDMA QUEUED [ 374.642751] ata3.00: cmd 60/08:58:00:2d:e7/00:00:2b:00:00/40 tag 11 ncq 4096 in [ 374.642751] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 374.657402] ata3.00: status: { DRDY } [ 374.661065] ata3.00: failed command: READ FPDMA QUEUED [ 374.666239] ata3.00: cmd 60/08:60:08:2d:e7/00:00:2b:00:00/40 tag 12 ncq 4096 in [ 374.666239] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 374.680895] ata3.00: status: { DRDY } [ 374.684557] ata3.00: failed command: READ FPDMA QUEUED [ 374.689731] ata3.00: cmd 60/08:68:10:2d:e7/00:00:2b:00:00/40 tag 13 ncq 4096 in [ 374.689731] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 374.704387] ata3.00: status: { DRDY } [ 374.708073] ata3: hard resetting link [ 375.215163] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 375.295217] ata3.00: configured for UDMA/133 [ 375.299498] ata3.00: device reported invalid CHS sector 0 [ 375.304882] ata3.00: device reported invalid CHS sector 0 [ 375.310299] ata3.00: device reported invalid CHS sector 0 [ 375.315707] ata3.00: device reported invalid CHS sector 0 [ 375.321099] ata3.00: device reported invalid CHS sector 0 [ 375.326508] ata3.00: device reported invalid CHS sector 0 [ 375.331899] ata3.00: device reported invalid CHS sector 0 [ 375.337308] ata3.00: device reported invalid CHS sector 0 [ 375.342698] ata3.00: device reported invalid CHS sector 0 [ 375.348120] ata3.00: device reported invalid CHS sector 0 [ 375.353507] ata3.00: device reported invalid CHS sector 0 [ 375.358918] ata3.00: device reported invalid CHS sector 0 [ 375.364308] ata3.00: device reported invalid CHS sector 0 [ 375.369750] ata3: EH complete [ 405.452726] ata3.00: NCQ disabled due to excessive errors [ 405.458143] ata3.00: exception Emask 0x0 SAct 0x3fe SErr 0x0 action 0x6 frozen [ 405.465370] ata3.00: failed command: READ FPDMA QUEUED [ 405.470532] ata3.00: cmd 60/08:08:08:2d:e7/00:00:2b:00:00/40 tag 1 ncq 4096 in [ 405.470532] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 405.485096] ata3.00: status: { DRDY } [ 405.488772] ata3.00: failed command: READ FPDMA QUEUED [ 405.493936] ata3.00: cmd 60/08:10:00:2d:e7/00:00:2b:00:00/40 tag 2 ncq 4096 in [ 405.493936] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 405.508502] ata3.00: status: { DRDY } [ 405.512162] ata3.00: failed command: READ FPDMA QUEUED [ 405.517336] ata3.00: cmd 60/08:18:f8:2c:e7/00:00:2b:00:00/40 tag 3 ncq 4096 in [ 405.517336] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 405.531898] ata3.00: status: { DRDY } [ 405.535573] ata3.00: failed command: READ FPDMA QUEUED [ 405.540729] ata3.00: cmd 60/08:20:f0:2c:e7/00:00:2b:00:00/40 tag 4 ncq 4096 in [ 405.540729] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 405.555295] ata3.00: status: { DRDY } [ 405.558957] ata3.00: failed command: READ FPDMA QUEUED [ 405.564117] ata3.00: cmd 60/08:28:e8:2c:e7/00:00:2b:00:00/40 tag 5 ncq 4096 in [ 405.564117] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 405.578687] ata3.00: status: { DRDY } [ 405.582346] ata3.00: failed command: READ FPDMA QUEUED [ 405.587519] ata3.00: cmd 60/08:30:e0:2c:e7/00:00:2b:00:00/40 tag 6 ncq 4096 in [ 405.587519] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 405.602090] ata3.00: status: { DRDY } [ 405.605764] ata3.00: failed command: READ FPDMA QUEUED [ 405.610921] ata3.00: cmd 60/08:38:d8:2c:e7/00:00:2b:00:00/40 tag 7 ncq 4096 in [ 405.610921] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 405.625494] ata3.00: status: { DRDY } [ 405.629157] ata3.00: failed command: READ FPDMA QUEUED [ 405.634318] ata3.00: cmd 60/08:40:d0:2c:e7/00:00:2b:00:00/40 tag 8 ncq 4096 in [ 405.634318] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 405.648886] ata3.00: status: { DRDY } [ 405.652545] ata3.00: failed command: READ FPDMA QUEUED [ 405.657720] ata3.00: cmd 60/08:48:c8:2c:e7/00:00:2b:00:00/40 tag 9 ncq 4096 in [ 405.657720] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 405.672289] ata3.00: status: { DRDY } [ 405.675977] ata3: hard resetting link [ 406.185168] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 406.285223] ata3.00: configured for UDMA/133 [ 406.289505] ata3.00: device reported invalid CHS sector 0 [ 406.294895] ata3.00: device reported invalid CHS sector 0 [ 406.300311] ata3.00: device reported invalid CHS sector 0 [ 406.305718] ata3.00: device reported invalid CHS sector 0 [ 406.311102] ata3.00: device reported invalid CHS sector 0 [ 406.316512] ata3.00: device reported invalid CHS sector 0 [ 406.321903] ata3.00: device reported invalid CHS sector 0 [ 406.327312] ata3.00: device reported invalid CHS sector 0 [ 406.332703] ata3.00: device reported invalid CHS sector 0 [ 406.338142] ata3: EH complete [ 406.462715] ata2.00: exception Emask 0x0 SAct 0xe SErr 0x0 action 0x6 frozen [ 406.469775] ata2.00: failed command: READ FPDMA QUEUED [ 406.474941] ata2.00: cmd 60/08:08:00:2d:e7/00:00:2b:00:00/40 tag 1 ncq 4096 in [ 406.474941] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 406.489505] ata2.00: status: { DRDY } [ 406.493166] ata2.00: failed command: READ FPDMA QUEUED [ 406.498340] ata2.00: cmd 60/08:10:08:2d:e7/00:00:2b:00:00/40 tag 2 ncq 4096 in [ 406.498340] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 406.512909] ata2.00: status: { DRDY } [ 406.516584] ata2.00: failed command: READ FPDMA QUEUED [ 406.521741] ata2.00: cmd 60/08:18:10:2d:e7/00:00:2b:00:00/40 tag 3 ncq 4096 in [ 406.521741] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 406.536306] ata2.00: status: { DRDY } [ 406.539985] ata2: hard resetting link [ 407.045166] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 407.145223] ata2.00: configured for UDMA/133 [ 407.149505] ata2.00: device reported invalid CHS sector 0 [ 407.154895] ata2.00: device reported invalid CHS sector 0 [ 407.160311] ata2.00: device reported invalid CHS sector 0 [ 407.165736] ata2: EH complete [ 437.522714] ata2: limiting SATA link speed to 1.5 Gbps [ 437.527879] ata2.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x6 frozen [ 437.534917] ata2.00: failed command: READ FPDMA QUEUED [ 437.540094] ata2.00: cmd 60/08:00:10:2d:e7/00:00:2b:00:00/40 tag 0 ncq 4096 in [ 437.540094] res 40/00:00:98:03:64/00:00:00:00:00/40 Emask 0x4 (timeout) [ 437.554659] ata2.00: status: { DRDY } [ 437.558335] ata2.00: failed command: READ FPDMA QUEUED [ 437.563498] ata2.00: cmd 60/08:08:08:2d:e7/00:00:2b:00:00/40 tag 1 ncq 4096 in [ 437.563498] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 437.578064] ata2.00: status: { DRDY } [ 437.581726] ata2.00: failed command: READ FPDMA QUEUED [ 437.586902] ata2.00: cmd 60/08:10:00:2d:e7/00:00:2b:00:00/40 tag 2 ncq 4096 in [ 437.586902] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 437.601469] ata2.00: status: { DRDY } [ 437.605159] ata2: hard resetting link [ 438.115176] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 438.195230] ata2.00: configured for UDMA/133 [ 438.199518] ata2.00: device reported invalid CHS sector 0 [ 438.204912] ata2.00: device reported invalid CHS sector 0 [ 438.210346] ata2: EH complete [ 468.492723] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 468.499781] ata3.00: failed command: READ DMA EXT [ 468.504509] ata3.00: cmd 25/00:08:98:2d:e7/00:00:2b:00:00/e0 tag 0 dma 4096 in [ 468.504509] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 468.519071] ata3.00: status: { DRDY } [ 468.522749] ata3: hard resetting link [ 469.035182] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 469.115236] ata3.00: configured for UDMA/133 [ 469.119538] ata3: EH complete [ 469.542734] ata1.00: exception Emask 0x0 SAct 0x1e SErr 0x0 action 0x6 frozen [ 469.549882] ata1.00: failed command: READ FPDMA QUEUED [ 469.555045] ata1.00: cmd 60/08:08:f8:2d:e7/00:00:2b:00:00/40 tag 1 ncq 4096 in [ 469.555045] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 469.569609] ata1.00: status: { DRDY } [ 469.573271] ata1.00: failed command: READ FPDMA QUEUED [ 469.578445] ata1.00: cmd 60/08:10:00:2e:e7/00:00:2b:00:00/40 tag 2 ncq 4096 in [ 469.578445] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 469.593014] ata1.00: status: { DRDY } [ 469.596688] ata1.00: failed command: READ FPDMA QUEUED [ 469.601845] ata1.00: cmd 60/08:18:08:2e:e7/00:00:2b:00:00/40 tag 3 ncq 4096 in [ 469.601845] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 469.616410] ata1.00: status: { DRDY } [ 469.620072] ata1.00: failed command: READ FPDMA QUEUED [ 469.625247] ata1.00: cmd 60/08:20:10:2e:e7/00:00:2b:00:00/40 tag 4 ncq 4096 in [ 469.625247] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 469.639817] ata1.00: status: { DRDY } [ 469.643494] ata1: hard resetting link [ 470.155180] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 470.235236] ata1.00: configured for UDMA/133 [ 470.239519] ata1.00: device reported invalid CHS sector 0 [ 470.244910] ata1.00: device reported invalid CHS sector 0 [ 470.250324] ata1.00: device reported invalid CHS sector 0 [ 470.255734] ata1.00: device reported invalid CHS sector 0 [ 470.261149] ata1: EH complete [ 499.562731] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 499.569791] ata3.00: failed command: READ DMA EXT [ 499.574518] ata3.00: cmd 25/00:08:a0:2d:e7/00:00:2b:00:00/e0 tag 0 dma 4096 in [ 499.574518] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 499.589083] ata3.00: status: { DRDY } [ 499.592758] ata3: hard resetting link [ 500.105204] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 500.205239] ata3.00: configured for UDMA/133 [ 500.209537] ata3: EH complete [ 530.532735] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 530.539795] ata3.00: failed command: READ DMA EXT [ 530.544528] ata3.00: cmd 25/00:70:a8:2d:e7/00:00:2b:00:00/e0 tag 0 dma 57344 in [ 530.544528] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 530.559179] ata3.00: status: { DRDY } [ 530.562858] ata3: hard resetting link [ 531.075193] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 531.155249] ata3.00: configured for UDMA/133 [ 531.159554] ata3: EH complete [ 561.582753] ata1.00: exception Emask 0x0 SAct 0x1f SErr 0x0 action 0x6 frozen [ 561.589898] ata1.00: failed command: READ FPDMA QUEUED [ 561.595065] ata1.00: cmd 60/08:00:80:2e:e7/00:00:2b:00:00/40 tag 0 ncq 4096 in [ 561.595065] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 561.609628] ata1.00: status: { DRDY } [ 561.613289] ata1.00: failed command: READ FPDMA QUEUED [ 561.618464] ata1.00: cmd 60/08:08:88:2e:e7/00:00:2b:00:00/40 tag 1 ncq 4096 in [ 561.618464] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 561.633033] ata1.00: status: { DRDY } [ 561.636708] ata1.00: failed command: READ FPDMA QUEUED [ 561.641864] ata1.00: cmd 60/08:10:70:2e:e7/00:00:2b:00:00/40 tag 2 ncq 4096 in [ 561.641864] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 561.656429] ata1.00: status: { DRDY } [ 561.660093] ata1.00: failed command: READ FPDMA QUEUED [ 561.665268] ata1.00: cmd 60/08:18:78:2e:e7/00:00:2b:00:00/40 tag 3 ncq 4096 in [ 561.665268] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 561.679835] ata1.00: status: { DRDY } [ 561.683498] ata1.00: failed command: READ FPDMA QUEUED [ 561.688674] ata1.00: cmd 60/08:20:90:2e:e7/00:00:2b:00:00/40 tag 4 ncq 4096 in [ 561.688674] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 561.703242] ata1.00: status: { DRDY } [ 561.706932] ata1: hard resetting link [ 562.215199] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 562.295255] ata1.00: configured for UDMA/133 [ 562.299537] ata1.00: device reported invalid CHS sector 0 [ 562.304929] ata1.00: device reported invalid CHS sector 0 [ 562.310345] ata1.00: device reported invalid CHS sector 0 [ 562.315752] ata1.00: device reported invalid CHS sector 0 [ 562.321163] ata1: EH complete [ 592.562741] ata3: limiting SATA link speed to 1.5 Gbps [ 592.567902] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 592.574939] ata3.00: failed command: READ DMA EXT [ 592.579684] ata3.00: cmd 25/00:08:a0:2e:e7/00:00:2b:00:00/e0 tag 0 dma 4096 in [ 592.579684] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 592.594250] ata3.00: status: { DRDY } [ 592.597938] ata3: hard resetting link [ 593.105205] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 593.185260] ata3.00: configured for UDMA/133 [ 593.189558] ata3: EH complete [ 623.602777] ata1.00: NCQ disabled due to excessive errors [ 623.608198] ata1.00: exception Emask 0x0 SAct 0xfff SErr 0x0 action 0x6 frozen [ 623.615426] ata1.00: failed command: READ FPDMA QUEUED [ 623.620587] ata1.00: cmd 60/08:00:c8:2e:e7/00:00:2b:00:00/40 tag 0 ncq 4096 in [ 623.620587] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 623.635150] ata1.00: status: { DRDY } [ 623.638827] ata1.00: failed command: READ FPDMA QUEUED [ 623.643990] ata1.00: cmd 60/08:08:d0:2e:e7/00:00:2b:00:00/40 tag 1 ncq 4096 in [ 623.643990] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 623.658556] ata1.00: status: { DRDY } [ 623.662217] ata1.00: failed command: READ FPDMA QUEUED [ 623.667392] ata1.00: cmd 60/08:10:d8:2e:e7/00:00:2b:00:00/40 tag 2 ncq 4096 in [ 623.667392] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 623.681962] ata1.00: status: { DRDY } [ 623.685636] ata1.00: failed command: READ FPDMA QUEUED [ 623.690793] ata1.00: cmd 60/08:18:e0:2e:e7/00:00:2b:00:00/40 tag 3 ncq 4096 in [ 623.690793] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 623.705359] ata1.00: status: { DRDY } [ 623.709021] ata1.00: failed command: READ FPDMA QUEUED [ 623.714182] ata1.00: cmd 60/08:20:b8:2e:e7/00:00:2b:00:00/40 tag 4 ncq 4096 in [ 623.714182] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 623.728748] ata1.00: status: { DRDY } [ 623.732409] ata1.00: failed command: READ FPDMA QUEUED [ 623.737583] ata1.00: cmd 60/08:28:c0:2e:e7/00:00:2b:00:00/40 tag 5 ncq 4096 in [ 623.737583] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 623.752153] ata1.00: status: { DRDY } [ 623.755827] ata1.00: failed command: READ FPDMA QUEUED [ 623.760985] ata1.00: cmd 60/08:30:e8:2e:e7/00:00:2b:00:00/40 tag 6 ncq 4096 in [ 623.760985] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 623.775551] ata1.00: status: { DRDY } [ 623.779212] ata1.00: failed command: READ FPDMA QUEUED [ 623.784373] ata1.00: cmd 60/08:38:f0:2e:e7/00:00:2b:00:00/40 tag 7 ncq 4096 in [ 623.784373] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 623.798940] ata1.00: status: { DRDY } [ 623.802600] ata1.00: failed command: READ FPDMA QUEUED [ 623.807774] ata1.00: cmd 60/08:40:f8:2e:e7/00:00:2b:00:00/40 tag 8 ncq 4096 in [ 623.807774] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 623.822344] ata1.00: status: { DRDY } [ 623.826019] ata1.00: failed command: READ FPDMA QUEUED [ 623.831176] ata1.00: cmd 60/08:48:00:2f:e7/00:00:2b:00:00/40 tag 9 ncq 4096 in [ 623.831176] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 623.845742] ata1.00: status: { DRDY } [ 623.849404] ata1.00: failed command: READ FPDMA QUEUED [ 623.854565] ata1.00: cmd 60/08:50:08:2f:e7/00:00:2b:00:00/40 tag 10 ncq 4096 in [ 623.854565] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 623.869218] ata1.00: status: { DRDY } [ 623.872878] ata1.00: failed command: READ FPDMA QUEUED [ 623.878052] ata1.00: cmd 60/08:58:10:2f:e7/00:00:2b:00:00/40 tag 11 ncq 4096 in [ 623.878052] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 623.892700] ata1.00: status: { DRDY } [ 623.896387] ata1: hard resetting link [ 624.405211] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 624.485267] ata1.00: configured for UDMA/133 [ 624.489550] ata1.00: device reported invalid CHS sector 0 [ 624.494941] ata1.00: device reported invalid CHS sector 0 [ 624.500357] ata1.00: device reported invalid CHS sector 0 [ 624.505764] ata1.00: device reported invalid CHS sector 0 [ 624.511150] ata1.00: device reported invalid CHS sector 0 [ 624.516558] ata1.00: device reported invalid CHS sector 0 [ 624.521949] ata1.00: device reported invalid CHS sector 0 [ 624.527357] ata1.00: device reported invalid CHS sector 0 [ 624.532750] ata1.00: device reported invalid CHS sector 0 [ 624.538157] ata1.00: device reported invalid CHS sector 0 [ 624.543550] ata1.00: device reported invalid CHS sector 0 [ 624.548991] ata1: EH complete [ 655.592764] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 655.599828] ata1.00: failed command: READ DMA EXT [ 655.604556] ata1.00: cmd 25/00:18:d8:32:e7/00:00:2b:00:00/e0 tag 0 dma 12288 in [ 655.604556] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 655.619204] ata1.00: status: { DRDY } [ 655.622882] ata1: hard resetting link [ 656.135217] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 656.215288] ata1.00: configured for UDMA/133 [ 656.219593] ata1: EH complete [ 686.642770] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 686.649828] ata1.00: failed command: READ DMA EXT [ 686.654555] ata1.00: cmd 25/00:08:c0:33:e7/00:00:2b:00:00/e0 tag 0 dma 4096 in [ 686.654555] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 686.669117] ata1.00: status: { DRDY } [ 686.672797] ata1: hard resetting link [ 687.185223] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 687.265280] ata1.00: configured for UDMA/133 [ 687.269587] ata1: EH complete [ 718.612787] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 718.619850] ata1.00: failed command: READ DMA EXT [ 718.624586] ata1.00: cmd 25/00:08:a8:38:e7/00:00:2b:00:00/e0 tag 0 dma 4096 in [ 718.624586] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 718.639148] ata1.00: status: { DRDY } [ 718.642826] ata1: hard resetting link [ 719.155229] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 719.235305] ata1.00: configured for UDMA/133 [ 719.239617] ata1: EH complete [ 749.702779] ata1: limiting SATA link speed to 1.5 Gbps [ 749.707944] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 749.714974] ata1.00: failed command: READ DMA EXT [ 749.719718] ata1.00: cmd 25/00:08:98:3a:e7/00:00:2b:00:00/e0 tag 0 dma 4096 in [ 749.719718] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 749.734283] ata1.00: status: { DRDY } [ 749.737972] ata1: hard resetting link [ 750.245241] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 750.325292] ata1.00: configured for UDMA/133 [ 750.329590] ata1: EH complete [ 817.165543] kjournald starting. Commit interval 5 seconds [ 817.234845] EXT3-fs (md0): using internal journal [ 817.305393] EXT3-fs (md0): recovery complete [ 817.309663] EXT3-fs (md0): mounted filesystem with ordered data mode [ 817.460289] udevd (1036): /proc/1036/oom_adj is deprecated, please use /proc/1036/oom_score_adj instead. [ 817.470055] udev: starting version 130 [ 821.345983] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 824.031324] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 836.708797] warning: `proftpd' uses 32-bit capabilities (legacy support in use) [ 879.155594] md: cannot remove active disk sde8 from md0 ... [ 897.444536] md: cannot remove active disk sde8 from md0 ... [ 1430.596965] md: cannot remove active disk sde8 from md0 ... [ 1441.997938] md: cannot remove active disk sde8 from md0 ... [ 1460.144866] md: cannot remove active disk sde8 from md0 ... [ 2541.747037] md/raid:md0: Disk failure on sde8, disabling device. [ 2541.747037] md/raid:md0: Operation continuing on 4 devices. [ 2542.335674] RAID conf printout: [ 2542.335703] --- level:5 rd:5 wd:4 [ 2542.335725] disk 0, o:1, dev:sdb8 [ 2542.335745] disk 1, o:1, dev:sdc8 [ 2542.335764] disk 2, o:1, dev:sdd8 [ 2542.335783] disk 3, o:0, dev:sde8 [ 2542.335803] disk 4, o:1, dev:sda8 [ 2542.335818] RAID conf printout: [ 2542.335836] --- level:5 rd:5 wd:4 [ 2542.335854] disk 0, o:1, dev:sdb8 [ 2542.335873] disk 1, o:1, dev:sdc8 [ 2542.335892] disk 2, o:1, dev:sdd8 [ 2542.335911] disk 4, o:1, dev:sda8 [ 2552.315099] md: unbind<sde8> [ 2552.318052] md: export_rdev(sde8) [ 2580.090800] ata1: exception Emask 0x10 SAct 0x0 SErr 0x190002 action 0xe frozen [ 2580.098114] ata1: edma_err_cause=00000020 pp_flags=00000001, SError=00180000 [ 2580.105152] ata1: SError: { RecovComm PHYRdyChg 10B8B Dispar } [ 2580.111005] ata1: hard resetting link [ 2580.855596] ata1: SATA link down (SStatus 0 SControl 310) [ 2585.855586] ata1: hard resetting link [ 2586.205599] ata1: SATA link down (SStatus 0 SControl 310) [ 2591.205589] ata1: hard resetting link [ 2591.555611] ata1: SATA link down (SStatus 0 SControl 310) [ 2591.561016] ata1.00: disabled [ 2591.564015] ata1: EH complete [ 2591.567034] ata1.00: detaching (SCSI 0:0:0:0) [ 2591.586117] sd 0:0:0:0: [sde] Synchronizing SCSI cache [ 2591.630337] sd 0:0:0:0: [sde] [ 2591.633487] Result: hostbyte=0x04 driverbyte=0x00 [ 2591.638220] sd 0:0:0:0: [sde] Stopping disk [ 2591.643871] sd 0:0:0:0: [sde] START_STOP FAILED [ 2591.648441] sd 0:0:0:0: [sde] [ 2591.651578] Result: hostbyte=0x04 driverbyte=0x00 [ 2787.608870] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen [ 2787.616274] ata1: edma_err_cause=00000010 pp_flags=00000000, dev connect [ 2787.622961] ata1: SError: { PHYRdyChg DevExch } [ 2787.627525] ata1: hard resetting link [ 2793.575729] ata1: link is slow to respond, please be patient (ready=0) [ 2797.655621] ata1: SRST failed (errno=-16) [ 2797.659631] ata1: hard resetting link [ 2798.565649] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2798.605690] ata1.00: ATA-8: Hitachi HDT721010SLA360, ST6OA3AA, max UDMA/133 [ 2798.612642] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2798.675706] ata1.00: configured for UDMA/133 [ 2798.679987] ata1: EH complete [ 2798.683442] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5 [ 2798.692060] fvdw1 disk index before get_sd_name = 0 [ 2798.696951] device-name= sata_mv [ 2798.700175] fvdw2 disk index after get_sd_name = 4 [ 2798.704950] fvdw3 prefix[0]=s prefix[1]=d [ 2798.709055] fvdw4 diskname = sde [ 2798.716053] sd 0:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2798.724389] sd 0:0:0:0: [sde] Write Protect is off [ 2798.729223] sd 0:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 2798.737215] sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2798.790318] sde: sde1 [ 2798.811933] sd 0:0:0:0: [sde] Attached SCSI disk root@fvdwsl-base:/ #

by **b1gnas** » Sun Oct 04, 2015 8:22 pm

Now how can i restore sde?

by **Jocko** » Sun Oct 04, 2015 8:23 pm

so we need to wait if some errors appear on ata1.

Can you try to copy some data on it

Code: Select all: cp -r /usr/lib /tmp/hitachi

Note to get dmesg output and flush it do

Code: Select all: dmesg -c

by **b1gnas** » Sun Oct 04, 2015 8:25 pm

cannot copy anything
many errors like these

Code: Select all: root@fvdwsl-base:/ # cp -r /usr/lib /tmp/hitachi cp: cannot create symbolic link `/tmp/hitachi/lib/libusbpp.so': Operation not permitted cp: cannot create symbolic link `/tmp/hitachi/lib/libpng.so.3': Operation not permitted cp: cannot create symbolic link `/tmp/hitachi/lib/libreadline.so.6': Operation not permitted

by **Jocko** » Sun Oct 04, 2015 8:31 pm

so use the folder '/usr/modules' instead of /usr/lib

by **b1gnas** » Sun Oct 04, 2015 8:34 pm

mmh
ok copied, but now dmesg as no output....

Code: Select all: root@fvdwsl-base: # cp -r /usr/modules /tmp/hitachi root@fvdwsl-base:/tmp/hitachi # dmesg

by **Jocko** » Sun Oct 04, 2015 8:35 pm

when you did "dmesg -c" command

by **b1gnas** » Sun Oct 04, 2015 8:37 pm

i did dmesg -c before running the command cp -r /usr/modules /tmp/hitachi

by **Jocko** » Sun Oct 04, 2015 8:43 pm

dmesg -c send the content so you must have the previous content in your terminal.

But at least, this confirms a compatibility issue between kernel and the disk barracuda and not a material issue.
We need now more time to deepen this point. So wait. (maybe a long time)

to restore you raid I already posted the instructions:

Jocko wrote:to restore do:
Code: Select all
umount /tmp/hitachi
remove your hitachi disk and plug again your barracuda disk. Then readd sde8 in the raid
Code: Select all
mdadm --re-add /dev/md0 /dev/sde8

restart the nas if there is no warning.

plugout.net

Error creating Raid 5

Re: Error creating Raid 5

Re: Error creating Raid 5

Re: Error creating Raid 5

Re: Error creating Raid 5

Re: Error creating Raid 5

Re: Error creating Raid 5

Re: Error creating Raid 5

Re: Error creating Raid 5

Re: Error creating Raid 5

Re: Error creating Raid 5

Who is online