Hello,
i wonder if is it possible to create a RAID5 using all 5 disks, with 3 TB each one.
I have installed firmware 16.0 on my 5bigNas2. I have marked as "fd00" type these disks: sdb2, sdc2,sdd2 and sde2. But I want to include sda8 (2,7 TB partiton)
All sdb2, sdc2, sdd2, sde2 have 2,7 TB also
I noticed that /dev/sda8 mounts on every boot as /share/1000
Is it possible to add this partition to the ARRAY schema?
plugout.net
Alternative firmware fvdw-sl
SPD8020, Lacie network space vs1,vs2 and max, 5big version 1&2, 2big version 1&2, internet space vs1, edmini_v2, D2 network version 1&2, raspberry Pi b
Create RAID5 using all 5 disks
2 posts
• Page 1 of 1
Create RAID5 using all 5 disks
by trosdejos » Thu Sep 24, 2015 8:35 am
- trosdejos
- Posts: 5
- Joined: Mon Sep 21, 2015 12:26 pm
Re: Create RAID5 using all 5 disks
by Jocko » Thu Sep 24, 2015 10:22 am
Hi trosdejos
:shocked Please to read the raid tutos in the download forum and follow exactly these tutos.
When we go to include raid management in the webGUI, only raid built by these way will be handled by the firmware.
So first you need to clean your custom partition table on sd[bcde] :mrgreen:
:shocked Please to read the raid tutos in the download forum and follow exactly these tutos.
When we go to include raid management in the webGUI, only raid built by these way will be handled by the firmware.
So first you need to clean your custom partition table on sd[bcde] :mrgreen:
- Jocko
- Site Admin - expert
- Posts: 11529
- Joined: Tue Apr 12, 2011 4:48 pm
- Location: Orleans, France
2 posts
• Page 1 of 1
Return to Lacie 5big Network vs2
Who is online
Users browsing this forum: No registered users and 5 guests