Alternative firmware fvdw-sl
SPD8020, Lacie network space vs1,vs2 and max, 5big version 1&2, 2big version 1&2, internet space vs1, edmini_v2, D2 network version 1&2, raspberry Pi b
by b1gnas » Sun Apr 19, 2015 11:56 am
root@fvdwsl-base:/ # mdadm --stop /dev/md0
mdadm: fail to stop array /dev/md0: Device or resource busy
root@fvdwsl-base:/ # umount /dev/md0
umount: /dev/md0: not mounted
root@fvdwsl-base:/ # mdadm --stop /dev/md0
mdadm: fail to stop array /dev/md0: Device or resource busy
by Jocko » Sun Apr 19, 2015 12:03 pm
killall noflushdby b1gnas » Sun Apr 19, 2015 12:19 pm
root@fvdwsl-base:/ # killall noflushd
root@fvdwsl-base:/ # killall smbd
root@fvdwsl-base:/ # umount /dev/md0
umount: /dev/md0: not mounted
root@fvdwsl-base:/ # mdadm -stop /dev/md0
mdadm: -s does not set the mode, and so cannot be the first option.
root@fvdwsl-base:/ # mdadm --stop /dev/md0
mdadm: fail to stop array /dev/md0: Device or resource busyby Jocko » Sun Apr 19, 2015 12:23 pm
by b1gnas » Sun Apr 19, 2015 1:02 pm
root@fvdwsl-base:/ # umount /dev/sdb8
root@fvdwsl-base:/ # umount /dev/sdc8
root@fvdwsl-base:/ # umount /dev/sde8
root@fvdwsl-base:/ # umount /dev/sdf8
umount: /dev/sdf8: not found
root@fvdwsl-base:/ # umount /dev/sdd8
root@fvdwsl-base:/ # mdadm --create /dev/md0 --level=5 --raid-devices=5 missing
/dev/sdb8 /dev/sdc8 /dev/sdd8 /dev/sde8
mdadm: /dev/sdb8 appears to contain an ext2fs file system
size=973474740K mtime=Sun Apr 19 16:42:09 2015
mdadm: /dev/sdc8 appears to contain an ext2fs file system
size=973474740K mtime=Sun Apr 19 16:42:10 2015
mdadm: /dev/sdd8 appears to contain an ext2fs file system
size=973474740K mtime=Sun Apr 19 16:42:10 2015
mdadm: /dev/sde8 appears to contain an ext2fs file system
size=973474740K mtime=Sun Apr 19 16:42:10 2015
Continue creating array? yes
mdadm: array /dev/md0 started.
root@fvdwsl-base:/ # cat /proc/mdstat
Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sde8[4] sdd8[3] sdc8[2] sdb8[1]
3893898496 blocks level 5, 64k chunk, algorithm 2 [5/4] [_UUUU]
unused devices: <none>
root@fvdwsl-base:/ # cat /etc/mdadm.0
CREATE owner=root group=root mode=0666 auto=yes
PROGRAM /usr/bin/mdadm-events
DEVICE /dev/sd[abcde]8
root@fvdwsl-base:/ # cat /etc/mdadm.0 > /etc/mdadm.conf
root@fvdwsl-base:/ # mdadm --detail --scan >> /etc/mdadm.conf
root@fvdwsl-base:/ # cat /proc/mdstat
Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sde8[4] sdd8[3] sdc8[2] sdb8[1]
3893898496 blocks level 5, 64k chunk, algorithm 2 [5/4] [_UUUU]
unused devices: <none>
root@fvdwsl-base:/ # cat /proc/mdstat
Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sde8[4] sdd8[3] sdc8[2] sdb8[1]
3893898496 blocks level 5, 64k chunk, algorithm 2 [5/4] [_UUUU]
unused devices: <none>
root@fvdwsl-base:/ # mke2fs -t ext3 -j -m 1 /dev/md0
mke2fs 1.42.11 (09-Jul-2014)
Creating filesystem with 973474624 4k blocks and 243376128 inodes
Filesystem UUID: 98090892-0088-4eb4-9d19-2f2de0cfe965
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
102400000, 214990848, 512000000, 550731776, 644972544
Allocating group tables: done
Writing inode tables: done
ext2fs_mkdir: Attempt to read block from filesystem resulted in short read while creating root dir
by Jocko » Sun Apr 19, 2015 1:13 pm
Did you check your disks ?(attributes table and short test)Jocko wrote:Before rebuilding the raid, use the SMART menu to check if there is nothing wrong with these 2 disks.
mke2fs -t ext3 -j -m 1 /dev/sdc8by Jocko » Sun Apr 19, 2015 1:23 pm
by b1gnas » Sun Apr 19, 2015 2:09 pm
root@fvdwsl-base:/ # mke2fs -t ext3 -j -m 1 /dev/sdc8
mke2fs 1.42.11 (09-Jul-2014)
/dev/sdc8 contains a ext3 file system
last mounted on Sun Apr 19 17:27:58 2015
Proceed anyway? (y,n) y
/dev/sdc8 is mounted; will not make a filesystem here!
root@fvdwsl-base:/ # umount /dev/sdc8
root@fvdwsl-base:/ # mke2fs -t ext3 -j -m 1 /dev/sdc8
mke2fs 1.42.11 (09-Jul-2014)
/dev/sdc8 contains a ext3 file system
last mounted on Sun Apr 19 17:27:58 2015
Proceed anyway? (y,n) y
Creating filesystem with 243368685 4k blocks and 60850176 inodes
Filesystem UUID: 65ee5455-2221-453a-9646-69021ae35b75
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
102400000, 214990848
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done root@fvdwsl-base:/ # dmesg
Booting Linux on physical CPU 0x0
Linux version 3.9.5 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #25 Thu Feb 27 22:22:32 GMT+1 2014
CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: LaCie 5Big1 Network
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x41000403
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 32768
free_area_init_node: node 0, pgdat c039aed8, node_mem_map c03cb000
Normal zone: 256 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 32768 pages, LIFO batch:7
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro boardType=mv88F5281 productType=5Big reset=0
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Memory: 128MB = 128MB total
Memory: 126024k/126024k available, 5048k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0355fdc (3384 kB)
.init : 0xc0356000 - 0xc0374ebc ( 124 kB)
.data : 0xc0376000 - 0xc039bee0 ( 152 kB)
.bss : 0xc039bee0 - 0xc03ca8dc ( 187 kB)
NR_IRQS:64
sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
Console: colour dummy device 80x30
Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0xc028ffc8 - 0xc0290004
NET: Registered protocol family 16
DMA: preallocated 1024 KiB pool for atomic coherent allocations
Register Driver 'dummy'
5big1 init started
Orion ID: MV88F5281-D0. TCLK=166666667.
Orion: Applying 5281 D0 WFI workaround.
5big1 init 1
initial MPP regs: 00000003 00000000 00170000
final MPP regs: 00000003 00000000 00170000
5big1 init 2
net5big: powering up SATA drives
5big1 init 3
5big1 init 4
5big1 init 5
5big1 init 6
5big1 init 7
5big1 init 8
5big1 init 9
5big1 init 10
5big1 init 11
5big1 init 12
net5big: turning off power-off control GPIO
net5big: Flash writing is not yet supported.
5big1 init end
orion_gpio_is_valid: invalid GPIO 20
orion_gpio_is_valid: invalid GPIO 20
net5big_pci_preinit failed to gpio_request 20
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: [11ab:5281] type 00 class 0x058000
pci 0000:00:00.0: reg 10: [mem 0xf1000000-0xf10fffff 64bit pref]
pci 0000:00:00.0: reg 18: [mem 0x00000000-0x07ffffff]
PCI: bus0: Fast back to back transfers disabled
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff]
pci_bus 0000:01: root bus resource [io 0x10000-0x1ffff]
pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
pci 0000:01:00.0: [11ab:5281] type 00 class 0x058000
pci 0000:01:00.0: reg 10: [mem 0x00000000-0x07ffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0x10000000-0x1fffffff 64bit pref]
pci 0000:01:00.0: reg 20: [mem 0xf1000000-0xf10fffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xe0000000-0xe7ffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:07.0: [11ab:6081] type 00 class 0x010000
pci 0000:01:07.0: reg 10: [mem 0x40000000-0x400fffff 64bit]
pci 0000:01:07.0: reg 18: [io 0xf0100000-0xf01000ff]
PCI: bus1: Fast back to back transfers enabled
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
pci 0000:01:07.0: BAR 0: assigned [mem 0xe8000000-0xe80fffff 64bit]
pci 0000:01:07.0: BAR 2: assigned [io 0x10000-0x100ff]
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
Register Driver 'Generic PHY'
Register Driver 'usbfs'
usbcore: registered new interface driver usbfs
Register Driver 'hub'
usbcore: registered new interface driver hub
Register Driver 'usb'
usbcore: registered new device driver usb
Register Driver 'i2c-gpio'
Switching to clocksource orion_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
PCI: CLS 32 bytes, default 32
Register Driver 'alarmtimer'
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 246
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Register Driver 'mv_xor'
mv_xor mv_xor.0: Marvell shared XOR driver
mv_xor mv_xor.0: Self-test copy failed compare, disabling
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Register Driver 'serial8250'
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
console [ttyS0] enabled
Register Driver 'serial'
brd: module loaded
loop: module loaded
Register Driver 'at24'
Register Driver 'eeprom'
Register Driver 'sd'
Register Driver 'ahci'
Register Driver 'sata_mv'
sata_mv 0000:01:07.0: version 1.28
sata_mv 0000:01:07.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
scsi0 : sata_mv
scsi1 : sata_mv
scsi2 : sata_mv
scsi3 : sata_mv
scsi4 : sata_mv
scsi5 : sata_mv
scsi6 : sata_mv
scsi7 : sata_mv
ata1: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8022000 irq 52
ata2: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8024000 irq 52
ata3: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8026000 irq 52
ata4: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8028000 irq 52
ata5: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8032000 irq 52
ata6: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8034000 irq 52
ata7: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8036000 irq 52
ata8: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8038000 irq 52
Register Driver 'sata_mv'
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: cannot get optional clkdev
sata_mv sata_mv.0: slots 32 ports 5
scsi8 : sata_mv
scsi9 : sata_mv
scsi10 : sata_mv
scsi11 : sata_mv
scsi12 : sata_mv
ata9: SATA max UDMA/133 irq 29
ata10: SATA max UDMA/133 irq 29
ata11: SATA max UDMA/133 irq 29
ata12: SATA max UDMA/133 irq 29
ata13: SATA max UDMA/133 irq 29
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
Register Driver 'mv643xx_eth'
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
libphy: mv643xx_eth smi: probed
Register Driver 'mv643xx_eth_port'
mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:86:ea:3a
mousedev: PS/2 mouse device common for all mice
Register Driver 'rtc-ds1307'
Register Driver 'rtc-ds1374'
Register Driver 'rtc-rs5c372'
i2c /dev entries driver
Register Driver 'mv64xxx_i2c'
rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6
rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
Register Driver 'g762'
g762 probe started
g762 probe 1
g762 probe 2
g762 probe 3
g762 probe 4
g762 probe 5
g762 probe 6
g762 probe 7
Register Driver 'gpio-fan'
Register Driver 'lm75'
Register Driver 'lm77'
Register Driver 'leds-gpio'
Register Driver 'mv_crypto'
Netfilter messages via NETLINK v0.30.
IPv4 over IPv4 tunneling driver
TCP: cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 5
VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
console [netcon0] enabled
netconsole: network logging started
rtc-rs5c372 0-0032: setting system clock to 2015-04-19 15:26:45 UTC (1429457205)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: ST31000340AS, SD15, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
fvdw1 disk index before get_sd_name = 0
device-name= sata_mv
fvdw2 disk index after get_sd_name = 4
fvdw3 prefix[0]=s prefix[1]=d
fvdw4 diskname = sde
sd 0:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sde] Write Protect is off
sd 0:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde4 < sde5 sde6 sde7 sde8 >
sd 0:0:0:0: [sde] Attached SCSI disk
ata9: failed to resume link (SControl 0)
ata9: SATA link down (SStatus 0 SControl 0)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: Hitachi HDT721010SLA360, ST6OA3AA, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
fvdw1 disk index before get_sd_name = 1
device-name= sata_mv
fvdw2 disk index after get_sd_name = 3
fvdw3 prefix[0]=s prefix[1]=d
fvdw4 diskname = sdd
sd 1:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdd] Write Protect is off
sd 1:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd4 < sdd5 sdd6 sdd7 sdd8 >
sd 1:0:0:0: [sdd] Attached SCSI disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: Hitachi HDT721010SLA360, ST6OA3AA, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
fvdw1 disk index before get_sd_name = 2
device-name= sata_mv
fvdw2 disk index after get_sd_name = 2
fvdw3 prefix[0]=s prefix[1]=d
fvdw4 diskname = sdc
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc4 < sdc5 sdc6 sdc7 sdc8 >
sd 2:0:0:0: [sdc] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
fvdw1 disk index before get_sd_name = 3
device-name= sata_mv
fvdw2 disk index after get_sd_name = 1
fvdw3 prefix[0]=s prefix[1]=d
fvdw4 diskname = sdb
sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdb] 4096-byte physical blocks
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb4 < sdb5 sdb6 sdb7 sdb8 >
sd 3:0:0:0: [sdb] Attached SCSI disk
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: ST31000333AS, LC15, max UDMA/133
ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ST31000333AS LC15 PQ: 0 ANSI: 5
fvdw1 disk index before get_sd_name = 4
device-name= sata_mv
fvdw2 disk index after get_sd_name = 0
fvdw3 prefix[0]=s prefix[1]=d
fvdw4 diskname = sda
sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 4:0:0:0: [sda] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata10: failed to resume link (SControl 0)
ata10: SATA link down (SStatus 0 SControl 0)
ata11: failed to resume link (SControl 0)
ata11: SATA link down (SStatus 0 SControl 0)
ata12: failed to resume link (SControl 0)
ata12: SATA link down (SStatus 0 SControl 0)
ata13: failed to resume link (SControl 0)
ata13: SATA link down (SStatus 0 SControl 0)
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda7): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:71.
Freeing init memory: 120K
EXT3-fs (sda7): warning: checktime reached, running e2fsck is recommended
EXT3-fs (sda7): using internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): warning: checktime reached, running e2fsck is recommended
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): recovery complete
EXT3-fs (sda1): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda5): warning: checktime reached, running e2fsck is recommended
EXT3-fs (sda5): using internal journal
EXT3-fs (sda5): recovery complete
EXT3-fs (sda5): mounted filesystem with ordered data mode
Adding 514076k swap on /dev/sda3. Priority:-1 extents:1 across:514076k
NTFS driver 2.1.30 [Flags: R/W MODULE].
fuse init (API version 7.21)
Register Driver 'usblp'
usbcore: registered new interface driver usblp
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
iSCSI Enterprise Target Software - version trunk
iscsi_trgt: Registered io type fileio
iscsi_trgt: Registered io type blockio
iscsi_trgt: Registered io type nullio
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Linux video capture interface: v2.00
uvcvideo: Unable to create debugfs directory
Register Driver 'uvcvideo'
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: int32x1 24 MB/s
raid6: int32x2 37 MB/s
raid6: int32x4 44 MB/s
raid6: int32x8 56 MB/s
raid6: using algorithm int32x8 (56 MB/s)
raid6: using intx1 recovery algorithm
async_tx: api initialized (async)
xor: measuring software checksum speed
arm4regs : 429.200 MB/sec
8regs : 336.800 MB/sec
32regs : 496.800 MB/sec
xor: using function: 32regs (496.800 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/20:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 16384 in
res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata4: EH complete
EXT3-fs (sda8): (no)user_xattr options not supported
EXT3-fs (sda8): (no)acl options not supported
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda8): warning: checktime reached, running e2fsck is recommended
EXT3-fs (sda8): using internal journal
EXT3-fs (sda8): recovery complete
EXT3-fs (sda8): mounted filesystem with ordered data mode
EXT3-fs (sdc8): (no)user_xattr options not supported
EXT3-fs (sdc8): (no)acl options not supported
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdc8): using internal journal
EXT3-fs (sdc8): mounted filesystem with ordered data mode
EXT3-fs (sdd8): (no)user_xattr options not supported
EXT3-fs (sdd8): (no)acl options not supported
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdd8): using internal journal
EXT3-fs (sdd8): mounted filesystem with ordered data mode
EXT3-fs (sde8): (no)user_xattr options not supported
EXT3-fs (sde8): (no)acl options not supported
kjournald starting. Commit interval 5 seconds
EXT3-fs (sde8): using internal journal
EXT3-fs (sde8): mounted filesystem with ordered data mode
udevd (991): /proc/991/oom_adj is deprecated, please use /proc/991/oom_score_adj instead.
udev: starting version 130
mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:00:98:03:64/02:00:00:00:00/40 tag 0 ncq 262144 in
res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata4.00: device reported invalid CHS sector 0
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:00:98:03:64/02:00:00:00:00/40 tag 0 ncq 262144 in
res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata4.00: device reported invalid CHS sector 0
ata4: EH complete
ata4.00: NCQ disabled due to excessive errors
ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/00:00:98:05:64/01:00:00:00:00/40 tag 0 ncq 131072 in
res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata4.00: device reported invalid CHS sector 0
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: failed command: IDENTIFY DEVICE
ata4.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: failed command: IDENTIFY DEVICE
ata4.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata4: EH complete
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: failed command: SMART
ata4.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata4: EH complete
root@fvdwsl-base:/ #
root@fvdwsl-base:/ # lsmod
raid10 38932 0 - Live 0xbf255000
raid456 57610 0 - Live 0xbf241000
async_raid6_recov 4754 1 raid456, Live 0xbf23c000
async_memcpy 1168 2 raid456,async_raid6_recov, Live 0xbf238000
async_pq 3686 2 raid456,async_raid6_recov, Live 0xbf234000
async_xor 2557 3 raid456,async_raid6_recov,async_pq, Live 0xbf230000
xor 3821 1 async_xor, Live 0xbf22c000
async_tx 1948 5 raid456,async_raid6_recov,async_memcpy,async_pq,async_xor, Live 0xbf228000
raid6_pq 83250 2 async_raid6_recov,async_pq, Live 0xbf210000
raid1 25990 0 - Live 0xbf205000
raid0 6859 0 - Live 0xbf200000
md_mod 97860 4 raid10,raid456,raid1,raid0, Live 0xbf1df000
uvcvideo 60902 0 - Live 0xbf1ca000
videobuf2_vmalloc 2469 1 uvcvideo, Live 0xbf1c6000
videobuf2_memops 1256 1 videobuf2_vmalloc, Live 0xbf1c2000
videobuf2_core 22544 1 uvcvideo, Live 0xbf1b8000
v4l2_common 8288 0 - Live 0xbf1b1000
v4l2_int_device 1906 0 - Live 0xbf1ad000
videodev 85579 3 uvcvideo,videobuf2_core,v4l2_common, Live 0xbf18f000
iscsi_tcp 7345 0 - Live 0xbf189000
libiscsi_tcp 11130 1 iscsi_tcp, Live 0xbf182000
libiscsi 29755 2 iscsi_tcp,libiscsi_tcp, Live 0xbf174000
scsi_transport_iscsi 32871 2 iscsi_tcp,libiscsi, Live 0xbf163000
iscsi_trgt 96019 0 - Live 0xbf143000 (O)
nfsd 81372 1 - Live 0xbf126000
exportfs 2825 1 nfsd, Live 0xbf122000
nfs 104468 0 - Live 0xbf0f9000
lockd 57065 2 nfsd,nfs, Live 0xbf0e3000
sunrpc 156449 3 nfsd,nfs,lockd, Live 0xbf0a9000
usblp 9297 0 - Live 0xbf0a2000
fuse 60769 0 - Live 0xbf08b000
ntfs 202409 0 - Live 0xbf050000
isofs 21978 0 - Live 0xbf046000
cifs 234559 0 - Live 0xbf000000
root@fvdwsl-base:/ #
SMART Information and device Tests
Disks: sda
Model: Seagate Barracuda 7200.11
Device: ST31000333AS
Smart status: Enabled
Health Test: PASSED
SMART Attributes Status
Id Attribute Name Flag Value Worst value Threshold Tipo Stato Raw data
1 Raw_Read_Error_Rate 0x000f 119 096 006 Pre-fail Ok 216809652
3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Ok 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Ok 3220
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Ok 4
7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Ok 35830214
9 Power_On_Hours 0x0032 089 089 000 Old_age Ok 10142
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Ok 3
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Ok 691
184 End-to-End_Error 0x0032 100 100 099 Old_age Ok 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Ok 0
188 Command_Timeout 0x0032 100 099 000 Old_age Ok 1
189 High_Fly_Writes 0x003a 001 001 000 Old_age Ok 905
190 Airflow_Temperature_Cel 0x0022 056 037 045 Old_age In_the_past 44 (9 202 44 42 0)
194 Temperature_Celsius 0x0022 044 063 000 Old_age Ok 44 (0 14 0 0 0)
195 Hardware_ECC_Recovered 0x001a 037 023 000 Old_age Ok 216809652
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Ok 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Ok 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Ok 0
SMART Information and device Tests
Disks: sdb
Model: Seagate Barracuda 7200.14 (AF)
Device: ST1000DM003-1ER162
Smart status: Enabled
Health Test: PASSED
SMART Attributes Status
Id Attribute Name Flag Value Worst value Threshold Tipo Stato Raw data
1 Raw_Read_Error_Rate 0x000f 108 100 006 Pre-fail Ok 15215776
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Ok 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Ok 40
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Ok 0
7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Ok 107044
9 Power_On_Hours 0x0032 100 100 000 Old_age Ok 27
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Ok 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Ok 31
183 Runtime_Bad_Block 0x0032 093 093 000 Old_age Ok 7
184 End-to-End_Error 0x0032 100 100 099 Old_age Ok 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Ok 0
188 Command_Timeout 0x0032 088 088 000 Old_age Ok 35 35 38
189 High_Fly_Writes 0x003a 100 100 000 Old_age Ok 0
190 Airflow_Temperature_Cel 0x0022 062 057 045 Old_age Ok 38 (Min/Max 36/38)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Ok 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Ok 17
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Ok 119
194 Temperature_Celsius 0x0022 038 043 000 Old_age Ok 38 (0 18 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Ok 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Ok 0
199 UDMA_CRC_Error_Count 0x003e 198 198 000 Old_age Ok 16
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Ok 5h+06m+25.574s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Ok 76299410
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Ok 10367466
SMART Information and device Tests
Disks: sdc
Model: Hitachi Deskstar 7K1000.B
Device: Hitachi HDT721010SLA360
Smart status: Enabled
Health Test: PASSED
SMART Attributes Status
Id Attribute Name Flag Value Worst value Threshold Tipo Stato Raw data
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Ok 0
2 Throughput_Performance 0x0005 129 129 054 Pre-fail Ok 125
3 Spin_Up_Time 0x0007 120 120 024 Pre-fail Ok 476 (Average 475)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Ok 83
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Ok 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Ok 0
8 Seek_Time_Performance 0x0005 125 125 020 Pre-fail Ok 33
9 Power_On_Hours 0x0012 100 100 000 Old_age Ok 2207
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Ok 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Ok 77
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Ok 87
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Ok 87
194 Temperature_Celsius 0x0002 153 153 000 Old_age Ok 39 (Min/Max 23/67)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Ok 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Ok 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Ok 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Ok 0
SMART Information and device Tests
Disks: sdd
Model: Hitachi Deskstar 7K1000.B
Device: Hitachi HDT721010SLA360
Smart status: Enabled
Health Test: PASSED
SMART Attributes Status
Id Attribute Name Flag Value Worst value Threshold Tipo Stato Raw data
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Ok 0
2 Throughput_Performance 0x0005 131 131 054 Pre-fail Ok 116
3 Spin_Up_Time 0x0007 119 119 024 Pre-fail Ok 474 (Average 485)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Ok 80
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Ok 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Ok 0
8 Seek_Time_Performance 0x0005 123 123 020 Pre-fail Ok 34
9 Power_On_Hours 0x0012 100 100 000 Old_age Ok 2207
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Ok 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Ok 77
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Ok 82
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Ok 82
194 Temperature_Celsius 0x0002 157 157 000 Old_age Ok 38 (Min/Max 23/67)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Ok 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Ok 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Ok 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Ok 0
SMART Information and device Tests
Disks: sde
Model: Seagate Barracuda 7200.11
Device: ST31000340AS
Smart status: Enabled
Health Test: PASSED
SMART Attributes Status
Id Attribute Name Flag Value Worst value Threshold Tipo Stato Raw data
1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Ok 217811054
3 Spin_Up_Time 0x0003 092 090 000 Pre-fail Ok 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Ok 236
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Ok 0
7 Seek_Error_Rate 0x000f 059 058 030 Pre-fail Ok 17183354637
9 Power_On_Hours 0x0032 100 100 000 Old_age Ok 411
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Ok 3
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Ok 189
184 End-to-End_Error 0x0032 100 100 099 Old_age Ok 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Ok 0
188 Command_Timeout 0x0032 100 099 000 Old_age Ok 1
189 High_Fly_Writes 0x003a 100 100 000 Old_age Ok 0
190 Airflow_Temperature_Cel 0x0022 066 042 045 Old_age In_the_past 34 (0 134 44 34 0)
194 Temperature_Celsius 0x0022 034 058 000 Old_age Ok 34 (0 14 0 0 0)
195 Hardware_ECC_Recovered 0x001a 041 033 000 Old_age Ok 217811054
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Ok 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Ok 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Ok 0
by Jocko » Sun Apr 19, 2015 2:29 pm
by b1gnas » Sun Apr 19, 2015 8:12 pm
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 10148 -
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 33 -
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 2213 -
# 2 Short offline Completed without error 00% 2207 -
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 2213 -
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 417 -
Return to Lacie 5Big Network vs1
Users browsing this forum: No registered users and 4 guests