LACIE D2 Network 2 Project (2)

[Jocko]

This file was useful in another topic. Its goal was to patch the previous firmware package version 16.0 which did not support fully d2nw2.

Yesterday, I updated the firmware package version 16.0 for nwsp2; mwspmax and now d2nw2.

So with the last firmware package version 16.0 (11apr15), this patch is useless and obsolete.

Then upgrade to version 16.0 your nas and check if the platform code is d2nw2 (cat /etc/platform)

[musafirrlail]

I've tried inject 3 part of rar into firmware update in WebManagement and result below here :

http://tinypic.com/r/vhesgi/8
http://tinypic.com/r/2dbo3ye/8
http://tinypic.com/r/f2v6ro/8

Please comment what I didn't ?

This is my pic of cat /etc/platform

[ img ]

[Jocko]

indeed there is an issue:

stillversion15.1.jpg

it seems that firmware version is still 15.1!

As you can not upgrade from this version but only from 15.3 you get this error : http://tinypic.com/r/f2v6ro/8

So you must try again to install version 15-3.

As your nas is still detected as a nwsp2 no need to do again the steps

So attached a file so that the firmware detects your nas as a nwsp2.
1/ To install it, create a share 'fvdw' (menu share management)
2/ save the tar file in the share 'fvdw'
Attachment:
fvdwsl15-1-fakenwsp2-25mar15.tar [795 Bytes]
3/ open a shell terminal (Putty or via winscp) with these default credentials: login=root and password=giveit2me
...
Code:
cat /etc/platform
You must get nwsp2 as output.

So only at these steps

If it is ok you can install version 15.3
1/ Use the package for platform nwsp2 (as the firmware detects your platform like a nwsp2)http://plugout.net/viewtopic.php?f=7&t=1867#p14927
...

up to step 6

[musafirrlail]

Oke I've done execute firmware 15.3 into D2N2 as below here :

http://tinypic.com/r/be7i8n/8

And I've done restart D2N2 from WebManagement

So ?

If I've done until step 16 of firmware is success, I will related/editing my thread previously so that all can not wrong step if wanna try ..

[Jocko]

So it seems to be clean with your version 15.3.

Now you can again to upgrade to version 16.0 from the firmware update menu.

[musafirrlail]

But after I've done execute firmware to 15.3 what are WebManagement still 15.1 shown or change to 15.3 ?

Because I've check WebManagement after execute 15.3 with putty the version on top lef still 15.1 ..

http://tinypic.com/r/1zyfof5/8

or there is a possibility that my input file 15.3 was wrong?

because when I noticed that the file I have is 31-mar15 but that you provide through the link is 10may2014

[Jocko]

What is the ouput of

Code: Select all

cat /etc/fvdwversion

. if you get "fvdw-sl 15.1" that means that :
-either you don't install version 15-3
-or you don't yet reboot the nas

I go to send you a file to shunt the step version 15.3 and allows you to install directly 16.0 as you already tried.

--edit--
attached the file to allow you to install directly version 16.0
1/ save the tar file in the share 'fvdw'

fvdw-15-1-upgradelaciepatch-12apr15.tar

2/ open a shell terminal (Putty or via winscp) with these default credentials: login=root and password=giveit2me
3/ In putty, do this command

Code: Select all

tar -xzf /share/1000/fvdw/fvdw-15-1-upgradelaciepatch-12apr15.tar -C /

4/ (no need to reboot the nas), try to install version 16.0 as you did with the firmware update menu (bin image file) from the web interface.

[musafirrlail]

All of your mean whereas I've done execute 15.3 into D2N2 with Putty and I've done reboot the NAS ..

http://tinypic.com/r/ftfeb/8

[Jocko]

So install my last attached file and upgrade directly to version 16.0

Note:

I've done execute 15.3 into D2N2 with Putty

that means that you did not make this step

1/ Use the package for platform nwsp2 (as the firmware detects your platform like a nwsp2)http://plugout.net/viewtopic.php?f=7&t=1867#p14927
use the menu Firmware Update>Firmware.
2/ Reboot the NAS and clear your browser cache

which require to use the web-interface and not Putty.

[musafirrlail]

Please correct yourside as below here :

15.1 firmware inject use ? Putty / Web ? What use file fvdwsl15-1-fakenwsp2-25mar15 ?

1/version 15.1 is installed by using fvdw-sl console
2/with Putty: patch the firmware 15.1 so that the firmware handles your NAS as a nwsp2 (fvdwsl15-1-fakenwsp2-25mar15)
3/ reboot the nas

15.3 firmware inject use ? Putty / Web ? What use file fvdwsl15-3-fakenwsp2-31mar15 ?

1/version 15.3 is installed with the web-interface (upgrade menu) by uploading the package available here: viewtopic.php?f=7&t=1867#p14927
2/ reboot the NAS and clean the browser cache
3/with Putty: patch the firmware 15.3 so that the firmware handles your NAS as a nwsp2 (fvdwsl15-3-fakenwsp2-31mar15)
4/ reboot the nas

16.0 firmware inject use ? Putty / Web ? What use file xfvdw-sl-16-0-nwsp2-11apr2014 ?

1/version 16.0 is installed with the web-interface (upgrade menu) by uploading the package xfvdw-sl-16-0-nwsp2-11apr2014.bin