fvdw-sl-10-1 and NTP servers

[bozo29]

@fvdw
I installed "firmware version 10-1 fvdw-sl" on LaCie NetworkSpace 2 (following the tutorial instructions) and it is absolutely amazing.
Good job, very, very good job. Thank you.
I have two small problems though:

1. In "System Management/Setup" I try to "Set Clock from internet time server (NTP)", and not working.
I put in the "NTP server 1: and NTP server 2:" fields anything: 0.europe.pool.ntp.org , 0.pool.ntp.org , 1.pool.ntp.org , 2.pool.ntp.org , even time.windows.com or time.nist.gov. No, don't work; receive the message "Value in highlighted field is illegal IP Address". And the problem is that, without an ntp server it report wrong Time Zone, or wrong time. I'm on the gmt+2 and it is report GMT 0. If i change to gmt+2 the time it is changed with 2 hours +.
How can i solved this?

2. How can I do to start TRANSMISSION automatically after HDD started (in case of power outage).

Thanks in advance and excuse my english

[Jocko]

Hi bozo29,

For the point 1 :

You mustn't use the domain name of the NTP server but its IP address : for example, 0.pool.ntp.org => 91.121.166.63

[bozo29]

Amazing! It works. :)
Thanks

[fvdw]

Hi Bozo

In the current firmware the transmission client is not started automatically after reboot and can not be set to this as for instance with the mediaservers. I will add that in the next release. Thks for your positive feedback, it is well appreciated :D