I can see sda7 after having installed only through the console. if I try I can not log in WINSscp ...
http://it.tinypic.com/r/18d8hk/8
cat /etc/fvdwversion
ls -al /etc/init.d
ls -al /sda7/etc/init.d
ls
0026FFF0 brightness lacie-boot nowhere sda7 var
00283280 clunc lib opt share
bin dev linuxrc proc sys
bin_cab etc lost+found root tmp
boot eth0 mail rw_fs trigger
boot.log fvdw-chroot mnt sbin usr
~ # mkdir /sda7
mkdir: can't create directory '/sda7': File exists
~ # mount /dev/sda7 /sda7
~ # cat /etc/fvdwversion
fvdw-sl 15.0
~ # cd ..
~ # cat /etc/fvdwversion
fvdw-sl 15.0
~ # ls -al /etc/init.d
total 88
drwxr-xr-x 2 root 0 4096 Mar 1 2014 .
drwxrwxrwx 15 root 0 4096 Mar 1 2014 ..
-rwxr-xr-x 1 root 0 1893 Mar 28 2013 fuse
-rwxr-xr-x 1 root 0 504 Dec 23 2012 insert-modules
-rwxr-xr-x 1 root 0 3779 Jul 13 2011 rc.banner
-rwxr-xr-x 1 root 0 3779 Jul 13 2011 rc.banner.copy
-rwxr-xr-x 1 root 0 5435 Sep 21 2013 rc.bootup1
-rwxr-xr-x 1 root 0 5435 Sep 21 2013 rc.bootup1.copy
-rwxr-xr-x 1 root 0 316 Aug 12 2013 rc.bootup2
-rwxr-xr-x 1 root 0 316 Aug 12 2013 rc.bootup2.copy
-rwxr-xr-x 1 root 0 3160 Aug 13 2013 rc.bootup3
-rwxr-xr-x 1 root 0 3160 Aug 13 2013 rc.bootup3.copy
-rwxr-xr-x 1 root 0 15252 Sep 27 2013 rcS
-rwxr-xr-x 1 root 0 15252 Sep 27 2013 rcS.copy
~ # cd sda7/
/sda7 # ls -al /sda7/etc/init.d
total 88
drwxr-xr-x 2 root 0 4096 Mar 1 2014 .
drwxrwxrwx 15 root 0 4096 Mar 1 2014 ..
-rwxr-xr-x 1 root 0 1893 Mar 28 2013 fuse
-rwxr-xr-x 1 root 0 504 Dec 23 2012 insert-modules
-rwxr-xr-x 1 root 0 3779 Jul 13 2011 rc.banner
-rwxr-xr-x 1 root 0 3779 Jul 13 2011 rc.banner.copy
-rwxr-xr-x 1 root 0 5435 Sep 21 2013 rc.bootup1
-rwxr-xr-x 1 root 0 5435 Sep 21 2013 rc.bootup1.copy
-rwxr-xr-x 1 root 0 316 Aug 12 2013 rc.bootup2
-rwxr-xr-x 1 root 0 316 Aug 12 2013 rc.bootup2.copy
-rwxr-xr-x 1 root 0 3160 Aug 13 2013 rc.bootup3
-rwxr-xr-x 1 root 0 3160 Aug 13 2013 rc.bootup3.copy
-rwxr-xr-x 1 root 0 15252 Sep 27 2013 rcS
-rwxr-xr-x 1 root 0 15252 Sep 27 2013 rcS.copy
/sda7 #
Jocko wrote:Seems that you have an error with tmp folder...
You can now make these tests without your serial console.Jocko wrote:1/
- in others settings menu, select the option 'LED On at next boot'
- in putty terminal
- Code: Select all
/etc/leds_bootup
if all is right, the front LED should be blue and not blinking and sata leds should be blue and blinking on R/W disk events (if a disk is missing then its led is red)
2/ - in others settings menu, select the option 'LED Off at next boot'
- in putty terminalI made an error about, just do in a Putty terminal
- Code: Select all
/etc/leds_bootup
if all is right, the front LED should be off but not the sata LEDS because we find no command to switch off them
- Code: Select all
/etc/leds_switch off
3/ in LED off/on menu, what is it the behavior when you try to switch on/off the LEDs
/etc/leds_bootup
/etc/leds_switch off
Return to Lacie 5Big Network vs1
Users browsing this forum: No registered users and 6 guests