LED control

[taetae]

I can not run the patch installation

[Jocko]

Do you put the usual control code 'unzip' (without the quotes) in the 2d field ?

[taetae]

with the command unzip everything worked I restarted the nas
1.I pressed on LED On / Off at boot
2. - in putty terminal

Code: Select all

~ # /etc/leds_bootup
/bin/sh: /etc/leds_bootup: not found
~ #


ls

Code: Select all

/etc # ls
21232f297a57a5a743894a0e4a801fc3  mail
SSL_fvdwsl                        mediatomb-config.xml
SSL_fvdwsl.conf                   minidlna.conf
api                               mt-daapd.conf
blacklist.dat                     mtab
check_valid_cmd.sh                nas_bin
cups                              nas_conf_db.xml
default                           nas_ext_hdd_db.xml
dhparams.pem                      nas_services
dropbear                          nss_mdns.conf
exports                           nsswitch.conf
exxt                              openvpn
filesystems                       passwd
finc                              passwd-
fstab                             php.ini
ftpparameters                     platform
fvdwversion                       platform_check.sh
fvdwversion.buildtime             ppp
fvdwversionpatched                pptpd.0
fw_env.config                     pptpd.conf
group                             profile
hosts                             proftpd.conf
hosts.allow                       protocols
hosts.deny                        resolv.conf
hosts.sh                          rpc
httpd.0                           services
httpd.1                           ssl
httpd.2                           start-lms
httpd.3                           start-nfs-server
httpd.4                           start-pptpd
httpd.conf                        start-tr-daemon
inc                               stop-nfs-server
init-tr-daemon                    sudoers
init.d                            system
inittab                           temp-alert.sh
iscsi                             udev
iscsi-target                      version
kernelversion                     version.buildtime
ld.so.cache                       version.subversion
ld.so.conf                        webdav.conf
localtime
/etc #


[Jocko]

:scratch

if you didn't yet restart your NAS, do

Code: Select all

ls -l /tmp/upload

[taetae]

Code: Select all

~ # ls -l /tmp/upload
ls: /tmp/upload: No such file or directory
~ #


Code: Select all

~ # ls
0026FFF0     boot.log     eth0         lost+found   proc         sys
00283280     brightness   fvdw-chroot  mail         root         tmp
bin          clunc        lacie-boot   mnt          rw_fs        trigger
bin_cab      dev          lib          nowhere      sbin         usr
boot         etc          linuxrc      opt          share        var
~ # cd tmp
/bin/sh: cd: can't cd to tmp


[Jocko]

:mrgreen: :mrgreen:
Seems that you have an error with tmp folder...
so post these outputs :

Code: Select all

 ls -al /

mount

Did you edit the file /etc/profile because you don't have the usual prompt ?

[taetae]

Code: Select all

~ #  ls -al /
total 152
drwxr-xr-x   23 root     0             4096 Sep 15 15:41 .
drwxr-xr-x   23 root     0             4096 Sep 15 15:41 ..
-rw-------    1 root     0            34555 Oct 16 18:56 .ash_history
lrwxrwxrwx    1 root     0               20 Oct 29  2013 .mldonkey -> /share/1000/mldonkey
lrwxrwxrwx    1 root     0               16 Mar  1  2014 .ssh -> ../../rw_fs/.ssh
-rw-r--r--    1 root     0                0 Mar  5  2014 0026FFF0
-rw-r--r--    1 root     0                0 Mar  5  2014 00283280
drwxr-xr-x    2 root     0             4096 May 11  2013 bin
drwxr-xr-x    2 root     0             4096 Aug  9  2013 bin_cab
drwxr-xr-x    2 root     0             4096 Sep 25  2013 boot
-rw-r--r--    1 root     0              137 Oct 16 18:18 boot.log
-rw-r--r--    1 root     0                2 Sep 15 15:41 brightness
drwxrwxrwx    2 root     0             4096 May 11  2013 clunc
drwxr-xr-x    5 root     0            12288 Oct 16 18:17 dev
drwxrwxrwx   15 root     0             4096 Mar  1  2014 etc
-rw-r--r--    1 root     0                0 Mar  5  2014 eth0
drwxr-xr-x   23 root     0             4096 Oct 12 11:31 fvdw-chroot
drwxrwxrwx    2 root     0             4096 Sep 12 15:14 lacie-boot
drwxr-xr-x    3 root     0             4096 Dec 27  2013 lib
lrwxrwxrwx    1 root     0               11 Oct 29  2013 linuxrc -> bin/busybox
drwx------    2 root     0            16384 Jan  3  2008 lost+found
drwxr-xr-x    3 root     0             4096 Dec 15  2012 mail
lrwxrwxrwx    1 root     0               14 Mar  1  2014 mnt -> /rw_fs/tmp/mnt
drwxr-xr-x    2 root     0             4096 Aug 27  2008 nowhere
drwxr-xr-x    7 root     0             4096 Aug  9  2013 opt
dr-xr-xr-x   81 root     0                0 Jan  1  1970 proc
drwxr-xr-x    2 root     0             4096 Jan  3  2008 root
drwxr-xr-x    2 root     0             4096 Nov  5  2013 rw_fs
drwxr-xr-x    2 root     0             4096 Mar  1  2014 sbin
drwxrwxrwx    7 root     0             4096 Nov  8  2013 share
dr-xr-xr-x   11 root     0                0 Oct 16 18:17 sys
lrwxrwxrwx    1 root     0               10 Mar  1  2014 tmp -> /rw_fs/tmp
-rw-r--r--    1 root     0               11 Sep 15 15:40 trigger
drwxr-xr-x   22 root     0             4096 Mar  1  2014 usr
drwxr-xr-x    3 root     0             4096 Mar  1  2014 var
~ #


Code: Select all

~ # mount
rootfs on / type rootfs (rw)
/dev/root on / type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
/dev/sda2 on /fvdw-chroot type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)
none on /fvdw-chroot/proc type proc (rw,relatime)
none on /fvdw-chroot/sys type sysfs (rw,relatime)
/dev/sda5 on /fvdw-chroot/rw_fs type ext3 (rw,noatime,errors=continue,barrier=1,data=ordered)
tmpfs on /fvdw-chroot/rw_fs/tmp/usr/var type tmpfs (rw,relatime,size=5000k)
nfsd on /fvdw-chroot/proc/fs/nfsd type nfsd (rw,relatime)
/dev/sda8 on /fvdw-chroot/share/1000 type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)
/dev/sdb8 on /fvdw-chroot/share/1001 type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)
/dev/sdc8 on /fvdw-chroot/share/1002 type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)
/dev/sdd8 on /fvdw-chroot/share/1003 type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)
/dev/sde8 on /fvdw-chroot/share/1004 type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)
/dev/root on /fvdw-chroot/lacie-boot type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)
~ #


I do not remember having changed anything ....

What should come out and where?

[Jocko]

You don't have the usual mount output !

Could you post here (attach the file) your rcS file (in /etc/init.d) and also the boot.log file.

--edit---
this issue may be depend on some files on sda7

so you must mount sda7

Code: Select all

mkdir /sda7
mount /dev/sda7 /sda7

see what is it the firmware version on sda7 :

Code: Select all

cat /sda7/etc/fvdwversion

and attach also the rcS file present in /sda7/etc/init.d

[taetae]

I remind you that I use the nas with 5 separate hard drives because I no fields are marked * raid and at the beginning we did a series of tests to ensure that everything worked as it is with fvdw

Code: Select all

~ # mkdir /sda7
~ # mount /dev/sda7 /sda7
~ # cat /sda7/etc/fvdwversion
fvdw-sl 15.0
~ #



[Jocko]

Hi Taetae,

The problem is not a RAID issue but it seems that the NAS is badly chrooted.

Next step this evening...

Note: You forgot to attach the rcS file presents in sda7 (so version 15.0)