2BIG2 firmware

[fvdw]

of course not, you will need to put the normal fvdw-sl kernel on the usb stick. The standalone kernel is not suitable for running the firmware

I attached the fvdw-sl 15-1 kernel for you. Put it in the folder /boot on you usb stick rename it it to uImage (so replace the standalone kernel)

[ded_kiev]

Ок,
Another question ...
all right with the partitions table?

5.jpg

[fvdw]

yes its ok

[ded_kiev]

This is a boot result of the new kernel ...

6.jpg

[fvdw]

if correct the firmware must be running now, so try to find the nas on your LAN, it should have an ip assigned by your dhcp server (router)

[fvdw]

the fvdw-sl assisistent might be a handy tool to find it

viewtopic.php?f=7&t=1488

[ded_kiev]

no nas found...(

Looks like I found the problem ...
After booting the new kernel - not working LAN adapter.
Without booting a new "uImage", LAN is Ok.

[fvdw]

what do you mean with "no lan" and please specify which kernel fails
it could be that we still need to set some boot arguments

[fvdw]

and also check if the the bootargs are still set correctly

[fvdw]

I will check which boot cmd we could use in u-boot console