lacie 5 big network v.1 please support for fvdw

[fvdw]

almost done the firmware package is being generated, will take 10 minutes

[taetae]

ok so the load;-) tomorrow and let you know with the test

[fvdw]

a new version is uploaded

viewtopic.php?f=7&t=1750&p=13418#p13418

[taetae]

updated but now I do not see anything in hd as if they had deleted 0.0

[Jocko]

What do you mean by 'hd' ?

[taetae]

samba partitions in law but by me empty and so are whitened because the hd are filled with imported data ...

But going with winscp I noticed than however the data are in the folders, but perhaps there was some inconsistency I know that has changed some specific partition .....

example:

/ share/1003
has three folders: lost + found, Venus (which was the main folder with all your important files first), Pluto (which is the folder to another hd empty) I think that some association is skipped and samba folder opens pluton empty Venus leaves intact


course / share/1004 does the opposite thing:

has three folders: lost + found, Pluto (which was the main folder with all your important files first), Venus (which is the folder to another hd empty) I think that some association is skipped and samba folder opens and Venus empty Pluto leaves intact




to clarify previously

/share/1004/Plutone

/share/1003/Venere


now are reversed then dubbed the folders and open the empty

/share/1003/Plutone empty

/share/1004/Venere empty

[Jocko]

No worries, I think your data are still here:

Do in putty for example:

Code: Select all

ls /share/1003/Pluto

See if you still have your samba shares

Code: Select all

smbclient -L 127.0.0.1

Other thing: how do you do several shares with same name: Venus on 1003 and 1004 :scratch :disapprove

Now it's time to go to bed...

[taetae]

just do not know ....

I have already checked that the files are only changed in my opinion the databese discs

Code: Select all

/share/1004$ cd ..
/share$ ls
1000
1001
1002
1003
1004
/share$ cd 1003
/share/1003$ ls
Plutone
Venere
lost+found
/share/1003$ cd ..
/share$ cd 1004
/share/1004$ ls
$RECYCLE.BIN
Plutone
Venere
lost+found
/share/1004$ cd Plutone
/share/1004/Plutone$ ls
Foto
Il mio filmato.avi
interventi
video dicembre
video luglio
/share/1004/Plutone$ cd ..
/share/1004$ cd ..
/share$ cd 1003
/share/1003$ cd Venere
/share/1003/Venere$ ls
5 big network
CV.doc
Cassa.xlsx
Chiavetta umts
Contour
Driver
Easy jet
Esami.xlsx
Ferie 2012.xls
Ferie 2013.xls
Giochi
Guida reset configurazione agia dialface.rar
Icone
Iphone
LST_132_1.dat
Lg seriale
Lg t310
Mac osx
Macchina
Modifica wii 4.3
My cinema u3100mini v2 plus
Portale
Posta
Posta certificata
Programmi
Ps2
Ps3
Raspberry Pi
Ripristino Dvd
Sistemi operativi
Tablet
Tom Tom xxl
UNIVERSITA
Videocamerine 2011
Vigili
Vodafone station
Wii
Xbox
Xim Edge
alice gate 2 plus
box tv
cell
email
gps
k3765 2013
log.smbd
mia tv 32lg7000
oculista carmine
router

I think you have reversed the
Vol and Vol-D-E



control better tomorrow but I think this is the problem you think if I move the hd manualemnte solve that invert the two physically hd?

now I go to bed thanks again for availability

[taetae]

after the scare I reasoned, and since the data I saw them all through putty and winscp I started to work and it was definitely a change on the management of hardisk. In fact, thinking then I renamed nell'intyerfaccia site (file share) the hd and everything is magically tornatoalla normality .... now I dedicate myself to the test samba because a dear colleague lent me his mac and I see a little thing I can try. I will let you know as soon as possible ..



EDIT

and here is a step forward with the MacBookPro I'm trying to a colleague with the latest operating system and apple picking works beautifully 700mb file in less than a minute ......

So I can rule out that it is a configuration problem Nas ....

The problem remains, however, why do you think windows 7 64bit, windows xp sp3, windows 8.1, Samba does not handle well?

The network consists of 100% how I can fix these systems according to you? turning on the internet I can not find uid or another problem inherent in this

[Jocko]

I think you have reversed the
Vol and Vol-D-E

No! and here a better explanation.

With your version 15.0, we disabled the disk database script and so you have a static disks database. After installing this disk database, either you swapped these two disks or we made an error in this static disk database.
To manage the shares when you change some physical disks or you swap some of them, each share is bound with the disk serial number where the share is created. So if the disk database is wrong, I assume that the shares : venere and plutone are bound with a wrong disk.

After installing version 15.1, now the firmware updates the disks database and when you reboot it restores where each disk is plugged. Then it restores, for it, the missing folder: so on 1004, creates an empty folder Plutone and on 1003, the folder Venere.

Swap again this two disks, won't restore the settings because the disk database will do the link between theses two shares and the wrong disks.

So to restore you do this, in putty

Code: Select all

mv /share/1004/Plutone /share/1004/Plutone.ok (It must be the not empty folder !!!)
mv /share/1003/Venere /share/1003/Venere.ok (It must be the not empty folder !!!)

Now remove the according shares : in the web-interface (File Share Management menu), delete the shares : Venere and Plutone (of course don't do it if you failed the previous step)
Check the content of 1003 and 1004: now in 1003, you must have only the folder Venere.ok (Plutone must have disappeared) and in 1004, only Plutone.ok (Venere must have disappeared)

Next step recreate the two shares by using the web-interface with the File Share Management menu (of course don't do it if you failed the previous step): Venere on Vol-D and Plutone on Vol-E with their previous users permissions. (of course don't do it if you failed the previous step)
Now you must have in 1003, two folders: Venere.ok and Venere (in 1004: Plutone.ok and Plutone)

Restart now the NAS, to check if in 1003 and 1004 you have still only their two folders (1003: Venere.ok and Venere and 1004: Plutone.ok and Plutone)
If it's ok, you can restore the share's content.

Code: Select all

mv /share/1003/Venere.ok /share/1003/Venere
mv /share/1004/Plutone.ok /share/1004/Plutone

After this last step, the configuration should be restored

Don't blame me if you lose your data by not following this sequence