iptables nat missing

[fvdw]

to show that there is a connection

on the nas you can see the tun device and ping the client, it works..

openvpn4.JPG

pinging the server (nas) from the client window s 7 pc works also....

openvpn3.JPG

so no need for NAT tables :whistle :geek:

[spidercat]

Hi fvdw,

first of all thanks a lot for your great work.
I confirm that your conf files works as you described.
But the result is the same as the TAP configuration, i'm able to reach server from client but no way to ping any other devices (or the gateway to use internet).
Enabling push "redirect-gateway def1 gave me two 0.0.0.0 routes entries in client route table.
And just adding push "route 192.168.1.0 255.255.255.0" is obviously not enough.
I suppose that iptables nat table is still needed to acomplish this ?
Right ?
Thanks a lot
have a nice day

[spidercat]

Hi,

i can confirm that after adding NAT module and after setting :

iptables -A POSTROUTING -t nat -o eth0 -j MASQUERADE

i'm able to browse my remote LAN network and everything works like i need.
Thanks a lot again dear fvdw
Regards

[fvdw]

:thumbup

Thanks for the feedback, agree that browsing the remote network was still a problem.
Ps do you also see and connect to the media servers and samba server via the vpn network ?

[spidercat]

Hi,

sorry for the late answer.
I'll try smb and media server through VPN asap, at now i don't have an answer yet :-(
Thanks a lot again