lacie 5 big network v.1 please support for fvdw

[fvdw]

I bought 4 2tb disks if you want to try everything

yes do that is quicker

put the 500GB disk with the firmware in slot 1, and the 2 TB disks in the other slots

ps keep an eye on the fan when all disks are installed, when it is temperature controlled on the main board then it should start at a certain moment.
Our firmware is able to detect the HDD temp of sda (disk setup menu). it should not exceed 55 oC. If the fan doesn't come on when they reach 50 oC then we need to find the reason why.

good night, need to go to bed now, sy tomorrow

[taetae]

then I assure you that is the kernel because with the original software lacie see all 5 hd and loads them;-)

you take a picture

[taetae]

mmmmmmm ;-) 500gb slot 1 , 2t slot 2, 2 tb slot 3, 2tb slot 4 , no hd slot 5

[fvdw]

:bananadance


looks good al 4 detected ...and the firmware is running you should have webinterface acces now
of course you will see only one disk, we need to adpat the database to get the others visible as well
A job for this evening I am now at work

ps why no disk in slot 5 ?

[taetae]

hahaha because I had another 2 tb from inserie hahaha but for tonight I try to avoid;-), I'll put a little hard to test

ps I get back from work tonight around 22:30 23:00 Italian time

then tomorrow morning :-( allotment to Milan and back in late October

[taetae]

here I am

[fvdw]

well then do the test with 5 disks
If that works then in principle we have a working kernel. Then my suggestion is that you to wait for release of fvdw-sl 15-0 that will have support for mutiple disks and a script that automatically will update your data base dependent on the number of disks found.
So no need to manually update the database and other scripts. As you will be off for work coming 5 weeks we have time to release the new version.
The release is planned for the next weeks

[taetae]

ok then do the test 5 hd (4 2tb ; 1 500gb system slot 1)

Code: Select all

         __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_
| | | |___|  _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
 \___/    |____/ \___/ \___/ \__|  ** LOADER **
 ** MARVELL BOARD: RD-88F5281-LaCie LE

U-Boot 1.1.4 (Jun 26 2008 - 16:55:41) Marvell version: 2.4.9

U-Boot code: 00200000 -> 0026FFF0  BSS: -> 00283280

Soc: 88F5281 D0 (DDR2)
CPU running @ 500Mhz
SysClock = 166Mhz , TClock = 166Mhz

DRAM CS[0] base 0x00000000   size 128MB
DRAM Total size 128MB  32bit width
[4096kB@ffc00000] Flash:  4 MB
Addresses 4M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (4M - 3M): Done
*** Warning - bad CRC, using default environment


CPU : ARM926 (Rev 0)
Streaming disabled
VFP initialized to Run Fast Mode.

USB 0: host mode
PCI 0: PCI Express Root Complex Interface
PCI 1: PCI-X, speed = 66000000
CPU: Write allocate Disabled
Net:   egiga0 [PRIME]
POWER ON
Hit any key to stop autoboot:  0
Waiting for LUMP (5)
no lump receive; continuing

Reset IDE:
Marvell Serial ATA Adapter
Found adapter at bus 1, device 7 ... Scanning channels
  Device 0: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0410979
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 1: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0218180
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 2: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0424246
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
Error - Failed initializing(SRST) drive on channel 3
Failed initializing storage deivce connected to SATA channel 3
  Device 4: OK
Model: WDC WD5000AADS-00S9B0                    Firm: 01.00A01 Ser#:      WD-WCAV90478832
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)


** Device 3 not available

** Device 3 not available

Loading from IDE device 4, partition 6: Name: hde6
  Type: U-Boot
   Image Name:   Linux-2.6.39.4
   Created:      2013-09-23  18:39:53 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1871800 Bytes =  1.8 MB
   Load Address: 00008000
   Entry Point:  00008000
## Booting image at 00400000 ...
   Image Name:   Linux-2.6.39.4
   Created:      2013-09-23  18:39:53 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1871800 Bytes =  1.8 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Linux version 2.6.39.4 (root@fvdwsl-5big2.local) (gcc version 4.5.4 (GCC) ) #20 PREEMPT Mon Sep 23 19:39:28 GMT+1 2013
CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: LaCie 5Big1 Network
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x41000403
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro boardType=mv88F5281 productType=5Big reset=0
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 125992k/125992k available, 5080k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xc8800000 - 0xfd800000   ( 848 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc0028000   ( 128 kB)
      .text : 0xc0028000 - 0xc03a6000   (3576 kB)
      .data : 0xc03a6000 - 0xc03c1a40   ( 111 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptable hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:64
sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Orion ID: MV88F5281-D0. TCLK=166666667.
Orion: Applying 5281 D0 WFI workaround.
net5big: powering up SATA drives
net5big: turning off power-off control GPIO
net5big: Flash writing is not yet supported.
PCI: bus0: Fast back to back transfers disabled
PCI: bus1: Fast back to back transfers enabled
pci 0000:01:07.0: BAR 0: assigned [mem 0xe8000000-0xe80fffff 64bit]
pci 0000:01:07.0: BAR 0: set to [mem 0xe8000000-0xe80fffff 64bit] (PCI address [0xe8000000-0xe80fffff])
pci 0000:01:07.0: BAR 2: assigned [io  0x100000-0x1000ff]
pci 0000:01:07.0: BAR 2: set to [io  0x100000-0x1000ff] (PCI address [0x100000-0x1000ff])
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource orion_clocksource
Switched to NOHz mode on CPU #0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 246
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
console [ttyS0] enabled
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
sata_mv 0000:01:07.0: version 1.28
sata_mv 0000:01:07.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
scsi0 : sata_mv
scsi1 : sata_mv
scsi2 : sata_mv
scsi3 : sata_mv
scsi4 : sata_mv
scsi5 : sata_mv
scsi6 : sata_mv
scsi7 : sata_mv
ata1: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8022000 irq 52
ata2: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8024000 irq 52
ata3: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8026000 irq 52
ata4: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8028000 irq 52
ata5: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8032000 irq 52
ata6: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8034000 irq 52
ata7: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8036000 irq 52
ata8: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8038000 irq 52
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 5
scsi8 : sata_mv
scsi9 : sata_mv
scsi10 : sata_mv
scsi11 : sata_mv
scsi12 : sata_mv
ata9: SATA max UDMA/133 irq 29
ata10: SATA max UDMA/133 irq 29
ata11: SATA max UDMA/133 irq 29
ata12: SATA max UDMA/133 irq 29
ata13: SATA max UDMA/133 irq 29
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:d0:4b:8b:60:2b
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
usbcore: registered new interface driver ipheth
console [netcon0] enabled
netconsole: network logging started
aoe: AoE v47 initialised.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: gpio-keys as /devices/platform/gpio-keys/input/input0
i2c /dev entries driver
rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6
rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor mv_xor.0: Self-test copy failed compare, disabling
mv_xor mv_xor.1: Self-test copy failed compare, disabling
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1968 buckets, 7872 max)
IPv4 over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 5
NET: Registered protocol family 37
VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
rtc-rs5c372 0-0032: setting system clock to 2013-09-26 00:27:50 UTC (1380155270)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 0
fvdw2 disk indexfvdw 0
fvdw3 disk indexfvdw 4
fvdw4 disk diskname= sde
sd 0:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sde] 4096-byte physical blocks
sd 0:0:0:0: [sde] Write Protect is off
sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9: failed to resume link (SControl 0)
ata9: SATA link down (SStatus 0 SControl 0)
ata2.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 1
fvdw2 disk indexfvdw 1
fvdw3 disk indexfvdw 3
fvdw4 disk diskname= sdd
sd 1:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
 sde: sde1
sd 1:0:0:0: [sdd] 4096-byte physical blocks
sd 0:0:0:0: [sde] Attached SCSI disk
sd 1:0:0:0: [sdd] Write Protect is off
sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 2
fvdw2 disk indexfvdw 2
fvdw3 disk indexfvdw 2
fvdw4 disk diskname= sdc
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1
sd 1:0:0:0: [sdd] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 3
fvdw2 disk indexfvdw 3
fvdw3 disk indexfvdw 1
fvdw4 disk diskname= sdb
sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: [sdb] 4096-byte physical blocks
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
 sdb: sdb1
scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] Attached SCSI disk
fvdw1 disk index 4
fvdw2 disk indexfvdw 4
fvdw3 disk indexfvdw 0
fvdw4 disk diskname= sda
sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 4:0:0:0: [sda] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata10: failed to resume link (SControl 0)
ata10: SATA link down (SStatus 0 SControl 0)
ata11: failed to resume link (SControl 0)
ata11: SATA link down (SStatus 0 SControl 0)
ata12: failed to resume link (SControl 0)
ata12: SATA link down (SStatus 0 SControl 0)
ata13: failed to resume link (SControl 0)
ata13: SATA link down (SStatus 0 SControl 0)
EXT3-fs (sda7): recovery required on readonly filesystem
EXT3-fs (sda7): write access will be enabled during recovery
EXT3-fs: barriers not enabled
EXT3-fs (sda7): recovery complete
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda7): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:71.
Freeing init memory: 128K
start rcS
set global environment params
mount proc
remount root file system rw
EXT3-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda7): using internal journal
mount sysfs
start boot log
update dev nodes
booting using sda2 file system...
EXT3-fs: barriers not enabled
EXT3-fs (sda2): warning: checktime reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): recovery complete
EXT3-fs (sda2): mounted filesystem with ordered data mode
start rcS
set global environment params
mount proc
remount root file system rw
mount sysfs
start boot log
update dev nodes
booting using sda2 root file system...
make dev node for buttons...
mkdir: cannot create directory '/dev/input': File exists
mknod: /dev/input/event0: File exists
make dev node for tun device...
mknod: /dev/net/tun: File exists
enable IP forwarding...
start buttons control daemon
run udevstart to update dev nodes when necessary
mkdir: cannot create directory 'rw_fs': File exists
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda5): using internal journal
EXT3-fs (sda5): recovery complete
EXT3-fs (sda5): mounted filesystem with ordered data mode
Setting up swapspace version 1, size = 526413824 bytes
UUID=25a29545-de47-4e3c-857a-7b126fc0fc5c
Adding 514076k swap on /dev/sda3.  Priority:-1 extents:1 across:514076k
NTFS driver 2.1.30 [Flags: R/W MODULE].
fuse init (API version 7.16)
usbcore: registered new interface driver usblp
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
iSCSI Enterprise Target Software - version trunk
iscsi_trgt: Registered io type fileio
iscsi_trgt: Registered io type blockio
iscsi_trgt: Registered io type nullio
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
Usage: mount -V                 : print version
       mount -h                 : print this help
       mount                    : list mounted filesystems
       mount -l                 : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
       mount -a [-t|-O] ...     : mount all stuff from /etc/fstab
       mount device             : mount device at the known place
       mount directory          : mount known device here
       mount -t type dev dir    : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
       mount --bind olddir newdir
or move a subtree:
       mount --move olddir newdir
One can change the type of mount containing the directory dir:
       mount --make-shared dir
       mount --make-slave dir
       mount --make-private dir
       mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
       mount --make-rshared dir
       mount --make-rslave dir
       mount --make-rprivate dir
       mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using  -L label  or by uuid, using  -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say  man 8 mount .
configure loopback network interface
starting php based setup routines step 1
passwd[740]: password for `carmine' changed by user `root'
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda8): using internal journal
EXT3-fs (sda8): recovery complete
EXT3-fs (sda8): mounted filesystem with ordered data mode
mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled
udevd (783): /proc/783/oom_adj is deprecated, please use /proc/783/oom_score_adj instead.
start portmap service
starting php based setup routines step2
starting php based setup routines step banner
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
move smbd en nmbd db files to ramdisk to enable disk spin down
mv: cannot rename '/rw_fs/tmp/smbd_flag': No such file or directory
------------------------
rcS finished
------------------------
 list boot.log file
start boot log
update dev nodes
booting using sda2 root file system...
make dev node for buttons...
make dev node for tun device...
enable IP forwarding...
start buttons control daemon
buttons-nwsp2 daemon started
Thu Sep 26 01:28:00 GMT+1 2013
run udevstart to update dev nodes when necessary
configure loopback netwerk interface
starting php based setup routines step 1



 * Initial XML configuration file...     [ OK ]
 * Configuring Disks...                                  [ OK ]
 * Configuring System Users...
        Root password: use default password
        Set users, linux and samba accounts      [ OK ]
 * Starting mount of volumes...
   - Mounting volume Default:                    [ OK ]
 * Finishing mount of volumes...                 [ OK ]
 * Generating Hosts File...                      [ OK ]
 * Configuring System Hostname...                [ OK ]
 * Configuring Samba...                                  [ OK ]
 * Configuring LAN interface...                  [ OK ]
 * Starting udevd...                                     [ OK ]
 * Starting web server...                                [ OK ]
 * Initializing Timezone...                      [ OK ]
 * Configuring Samba...                                  [ OK ]
 * Starting syncawayd...                                 [ OK ]
start portmap service
starting php based setup routines step 2


 * Starting dropbear...                                  [ OK ]
 * Kill temporary dropbear...                    [ OK ]
 * Starting daemon update Hosts File...  [ OK ]
starting php based setup routines step banner


*** fvdw-sl NAS firmware
    This is fvdw-sl version: fvdw-sl 14.0
    built on: December 23 2012

    LAN IP address: 192.168.1.71 (DHCP)

    Port configuration:

    LAN   -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
move smbd en nmbd db files to ramdisk to enable disk spin down
rcS finished
------------------------
rcS finished
------------------------
 list boot.log file
start boot log
update dev nodes
Thu Sep 26 01:27:59 GMT+1 2013
booting using sda2 file system...
rcS finished
/bin/sh: can't access tty; job control turned off
#


[fvdw]

ok allora ora faccio una prova con 5 hd (4 2tb ; 1 500gb system slot 1)

:dontknow :scratch

[taetae]

second boot hd slot 3 work ......

Code: Select all

         __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_
| | | |___|  _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
 \___/    |____/ \___/ \___/ \__|  ** LOADER **
 ** MARVELL BOARD: RD-88F5281-LaCie LE

U-Boot 1.1.4 (Jun 26 2008 - 16:55:41) Marvell version: 2.4.9

U-Boot code: 00200000 -> 0026FFF0  BSS: -> 00283280

Soc: 88F5281 D0 (DDR2)
CPU running @ 500Mhz
SysClock = 166Mhz , TClock = 166Mhz

DRAM CS[0] base 0x00000000   size 128MB
DRAM Total size 128MB  32bit width
[4096kB@ffc00000] Flash:  4 MB
Addresses 4M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (4M - 3M): Done
*** Warning - bad CRC, using default environment


CPU : ARM926 (Rev 0)
Streaming disabled
VFP initialized to Run Fast Mode.

USB 0: host mode
PCI 0: PCI Express Root Complex Interface
PCI 1: PCI-X, speed = 66000000
CPU: Write allocate Disabled
Net:   egiga0 [PRIME]
POWER ON
Hit any key to stop autoboot:  0
Marvell>> boot
Waiting for LUMP (5)
no lump receive; continuing

Reset IDE:
Marvell Serial ATA Adapter
Found adapter at bus 1, device 7 ... Scanning channels
  Device 0: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0410979
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 1: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0218180
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 2: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0424246
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 3: OK
Model: WDC WD20EZRX-00D8PB0                     Firm: 80.00A80 Ser#:      WD-WMC4M0219436
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
  Device 4: OK
Model: WDC WD5000AADS-00S9B0                    Firm: 01.00A01 Ser#:      WD-WCAV90478832
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)


Loading from IDE device 4, partition 6: Name: hde6
  Type: U-Boot
   Image Name:   Linux-2.6.39.4
   Created:      2013-09-23  18:39:53 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1871800 Bytes =  1.8 MB
   Load Address: 00008000
   Entry Point:  00008000
## Booting image at 00400000 ...
   Image Name:   Linux-2.6.39.4
   Created:      2013-09-23  18:39:53 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1871800 Bytes =  1.8 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Linux version 2.6.39.4 (root@fvdwsl-5big2.local) (gcc version 4.5.4 (GCC) ) #20 PREEMPT Mon Sep 23 19:39:28 GMT+1 2013
CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: LaCie 5Big1 Network
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x41000403
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro boardType=mv88F5281 productType=5Big reset=0
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 125992k/125992k available, 5080k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xc8800000 - 0xfd800000   ( 848 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc0028000   ( 128 kB)
      .text : 0xc0028000 - 0xc03a6000   (3576 kB)
      .data : 0xc03a6000 - 0xc03c1a40   ( 111 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptable hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:64
sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Orion ID: MV88F5281-D0. TCLK=166666667.
Orion: Applying 5281 D0 WFI workaround.
net5big: powering up SATA drives
net5big: turning off power-off control GPIO
net5big: Flash writing is not yet supported.
PCI: bus0: Fast back to back transfers disabled
PCI: bus1: Fast back to back transfers enabled
pci 0000:01:07.0: BAR 0: assigned [mem 0xe8000000-0xe80fffff 64bit]
pci 0000:01:07.0: BAR 0: set to [mem 0xe8000000-0xe80fffff 64bit] (PCI address [0xe8000000-0xe80fffff])
pci 0000:01:07.0: BAR 2: assigned [io  0x100000-0x1000ff]
pci 0000:01:07.0: BAR 2: set to [io  0x100000-0x1000ff] (PCI address [0x100000-0x1000ff])
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource orion_clocksource
Switched to NOHz mode on CPU #0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 246
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
console [ttyS0] enabled
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
sata_mv 0000:01:07.0: version 1.28
sata_mv 0000:01:07.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
scsi0 : sata_mv
scsi1 : sata_mv
scsi2 : sata_mv
scsi3 : sata_mv
scsi4 : sata_mv
scsi5 : sata_mv
scsi6 : sata_mv
scsi7 : sata_mv
ata1: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8022000 irq 52
ata2: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8024000 irq 52
ata3: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8026000 irq 52
ata4: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8028000 irq 52
ata5: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8032000 irq 52
ata6: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8034000 irq 52
ata7: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8036000 irq 52
ata8: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8038000 irq 52
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 5
scsi8 : sata_mv
scsi9 : sata_mv
scsi10 : sata_mv
scsi11 : sata_mv
scsi12 : sata_mv
ata9: SATA max UDMA/133 irq 29
ata10: SATA max UDMA/133 irq 29
ata11: SATA max UDMA/133 irq 29
ata12: SATA max UDMA/133 irq 29
ata13: SATA max UDMA/133 irq 29
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:d0:4b:8b:60:2b
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
usbcore: registered new interface driver ipheth
console [netcon0] enabled
netconsole: network logging started
aoe: AoE v47 initialised.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: gpio-keys as /devices/platform/gpio-keys/input/input0
i2c /dev entries driver
rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6
rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor mv_xor.0: Self-test copy failed compare, disabling
mv_xor mv_xor.1: Self-test copy failed compare, disabling
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1968 buckets, 7872 max)
IPv4 over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 5
NET: Registered protocol family 37
VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
rtc-rs5c372 0-0032: setting system clock to 2013-09-26 00:31:41 UTC (1380155501)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 0
fvdw2 disk indexfvdw 0
fvdw3 disk indexfvdw 4
fvdw4 disk diskname= sde
sd 0:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sde] 4096-byte physical blocks
sd 0:0:0:0: [sde] Write Protect is off
sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9: failed to resume link (SControl 0)
ata9: SATA link down (SStatus 0 SControl 0)
ata2.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 1
fvdw2 disk indexfvdw 1
fvdw3 disk indexfvdw 3
fvdw4 disk diskname= sdd
sd 1:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdd] 4096-byte physical blocks
sd 1:0:0:0: [sdd] Write Protect is off
 sde: sde1
sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sde] Attached SCSI disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 2
fvdw2 disk indexfvdw 2
fvdw3 disk indexfvdw 2
fvdw4 disk diskname= sdc
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1
sd 1:0:0:0: [sdd] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
fvdw1 disk index 3
fvdw2 disk indexfvdw 3
fvdw3 disk indexfvdw 1
fvdw4 disk diskname= sdb
sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: [sdb] 4096-byte physical blocks
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
 sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
fvdw1 disk index 4
fvdw2 disk indexfvdw 4
fvdw3 disk indexfvdw 0
fvdw4 disk diskname= sda
sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 4:0:0:0: [sda] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata10: failed to resume link (SControl 0)
ata10: SATA link down (SStatus 0 SControl 0)
ata11: failed to resume link (SControl 0)
ata11: SATA link down (SStatus 0 SControl 0)
ata12: failed to resume link (SControl 0)
ata12: SATA link down (SStatus 0 SControl 0)
ata13: failed to resume link (SControl 0)
ata13: SATA link down (SStatus 0 SControl 0)
EXT3-fs (sda7): recovery required on readonly filesystem
EXT3-fs (sda7): write access will be enabled during recovery
EXT3-fs: barriers not enabled
EXT3-fs (sda7): recovery complete
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda7): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:71.
Freeing init memory: 128K
start rcS
set global environment params
mount proc
remount root file system rw
EXT3-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda7): using internal journal
mount sysfs
start boot log
update dev nodes
booting using sda2 file system...
EXT3-fs: barriers not enabled
EXT3-fs (sda2): warning: checktime reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): recovery complete
EXT3-fs (sda2): mounted filesystem with ordered data mode
start rcS
set global environment params
mount proc
remount root file system rw
mount sysfs
start boot log
update dev nodes
booting using sda2 root file system...
make dev node for buttons...
mkdir: cannot create directory '/dev/input': File exists
mknod: /dev/input/event0: File exists
make dev node for tun device...
mknod: /dev/net/tun: File exists
enable IP forwarding...
start buttons control daemon
run udevstart to update dev nodes when necessary
mkdir: cannot create directory 'rw_fs': File exists
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda5): using internal journal
EXT3-fs (sda5): recovery complete
EXT3-fs (sda5): mounted filesystem with ordered data mode
Setting up swapspace version 1, size = 526413824 bytes
UUID=d6980d3f-1a5a-4e2c-b174-9a7cb4fc9002
Adding 514076k swap on /dev/sda3.  Priority:-1 extents:1 across:514076k
NTFS driver 2.1.30 [Flags: R/W MODULE].
fuse init (API version 7.16)
usbcore: registered new interface driver usblp
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
iSCSI Enterprise Target Software - version trunk
iscsi_trgt: Registered io type fileio
iscsi_trgt: Registered io type blockio
iscsi_trgt: Registered io type nullio
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
Usage: mount -V                 : print version
       mount -h                 : print this help
       mount                    : list mounted filesystems
       mount -l                 : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
       mount -a [-t|-O] ...     : mount all stuff from /etc/fstab
       mount device             : mount device at the known place
       mount directory          : mount known device here
       mount -t type dev dir    : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
       mount --bind olddir newdir
or move a subtree:
       mount --move olddir newdir
One can change the type of mount containing the directory dir:
       mount --make-shared dir
       mount --make-slave dir
       mount --make-private dir
       mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
       mount --make-rshared dir
       mount --make-rslave dir
       mount --make-rprivate dir
       mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using  -L label  or by uuid, using  -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say  man 8 mount .
configure loopback network interface
starting php based setup routines step 1
passwd[740]: password for `carmine' changed by user `root'
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda8): using internal journal
EXT3-fs (sda8): recovery complete
EXT3-fs (sda8): mounted filesystem with ordered data mode
mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled
udevd (783): /proc/783/oom_adj is deprecated, please use /proc/783/oom_score_adj instead.
start portmap service
starting php based setup routines step2
starting php based setup routines step banner
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
move smbd en nmbd db files to ramdisk to enable disk spin down
mv: cannot rename '/rw_fs/tmp/smbd_flag': No such file or directory
------------------------
rcS finished
------------------------
 list boot.log file
start boot log
update dev nodes
booting using sda2 root file system...
make dev node for buttons...
make dev node for tun device...
enable IP forwarding...
start buttons control daemon
buttons-nwsp2 daemon started
Thu Sep 26 01:31:51 GMT+1 2013
run udevstart to update dev nodes when necessary
configure loopback netwerk interface
starting php based setup routines step 1



 * Initial XML configuration file...     [ OK ]
 * Configuring Disks...                                  [ OK ]
 * Configuring System Users...
        Root password: use default password
        Set users, linux and samba accounts      [ OK ]
 * Starting mount of volumes...
   - Mounting volume Default:                    [ OK ]
 * Finishing mount of volumes...                 [ OK ]
 * Generating Hosts File...                      [ OK ]
 * Configuring System Hostname...                [ OK ]
 * Configuring Samba...                                  [ OK ]
 * Configuring LAN interface...                  [ OK ]
 * Starting udevd...                                     [ OK ]
 * Starting web server...                                [ OK ]
 * Initializing Timezone...                      [ OK ]
 * Configuring Samba...                                  [ OK ]
 * Starting syncawayd...                                 [ OK ]
start portmap service
starting php based setup routines step 2


 * Starting dropbear...                                  [ OK ]
 * Kill temporary dropbear...                    [ OK ]
 * Starting daemon update Hosts File...  [ OK ]
starting php based setup routines step banner


*** fvdw-sl NAS firmware
    This is fvdw-sl version: fvdw-sl 14.0
    built on: December 23 2012

    LAN IP address: 192.168.1.71 (DHCP)

    Port configuration:

    LAN   -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
move smbd en nmbd db files to ramdisk to enable disk spin down
rcS finished
------------------------
rcS finished
------------------------
 list boot.log file
start boot log
update dev nodes
Thu Sep 26 01:31:50 GMT+1 2013
booting using sda2 file system...
rcS finished
/bin/sh: can't access tty; job control turned off
#