webcam integration

[fvdw]

attached the requested kernel modules

gspca_sonixj-ov519.zip

[ronyronen]

attached the requested kernel modules

Thanks. It works for me. :thumbup

[ryder]

Hi, I would like to test a Trust 120 Spacecam on a isp1 NAS. Can you compile the module gspca_sonixb 0c45:600d spcaCam@120?

Thanks in advance

[fvdw]

no problem attached a bunch of gspca modules, think besides the one for you device you also need to load gspca_main.ko
Thes are for isp1 (internet space 1) running 2.6.39.4 Linux kernel

gspca_isp1-kernel-26394-modules.zip

[ryder]

Thanks, it works great!

[frikzy]

Hi,
I tried Logitech HD WebCam c270 and after some changes in motion.conf (v4l2_palette 6) it works with uvc driver.
I would like to test my second webcam Genius VideoCam Web V2 (Vendor=0458 ProdID=700f Rev=01.00) on a Network Space vs2 NAS. Can you compile the module for it?

Thanks in advance

[fvdw]

you will need the gspca main module and any of the gspca_spcaxx modules

[frikzy]

Genius Videocam web v2 works OK, but only with driver gspca_zc3xx.ko .

Thanks!

This is text form USB-devices:

Code: Select all

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 1
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=02.06
S:  Manufacturer=Linux 2.6.39.4 ehci_hcd
S:  Product=Marvell Orion EHCI
S:  SerialNumber=orion-ehci.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  8 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0458 ProdID=700f Rev=01.00
C:  #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=160mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=zc3xx
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=zc3xx

[fvdw]

mm..you seem to be right I got the information on drivers from here http://mxhaard.free.fr/spca5xx.html
There it mentions a different driver for this webcam

But on this page it mentions the driver you mentioned
http://linuxtv.org/wiki/index.php/Gspca_devices

[ardescos]

Hi,

I would like to use my logitech quickcam chat on an isp1.
I think it needs the gspca_spca561 (the entry gspca_spca561 046d:092e Logitech QC Elch2 ) .
Could you compile the module for it?

Thanks in advance