How to install fvdw-sl

Re: How to install fvdw-sl

Postby antieco » Sat Mar 23, 2019 6:23 pm

I been able to see hdd partitions plugged to a laptop.
Now im trying to understand how to run fvdw console as cloudbox never gets ip from router.
So reading lots.
ill be happy having my data back, and going for your firmware as it seems to be a good opportunity
antieco
Donator VIP
Donator VIP
 
Posts: 40
Joined: Thu Mar 14, 2019 4:13 pm

Re: How to install fvdw-sl

Postby fvdw » Sat Mar 23, 2019 6:31 pm

If you can see the partitions on your laptop I assume when running ubuntu then you can assemble the raid array as explained under ubuntu and get access to your data and make a backup.

After that you can install our firmware if you wish with the disk in the cloudbox and usinf fvdw-sl console. The console will detect your cloudbox when it is switched on. The bootloader of the nas will check the lan for a certain signal and interupt boot and enter a special mode. The console will send this signal and upload a kernel when the nas responds. This kernel runs fully in ram and activates a telnet server that can be contacted with a telnet client...etc etc Read help of the console
fvdw
Site Admin - expert
 
Posts: 13472
Joined: Tue Apr 12, 2011 2:30 pm
Location: Netherlands

Re: How to install fvdw-sl

Postby antieco » Sat Mar 23, 2019 6:34 pm

many thanks, im reading about mounting raid on ubuntu.. why isnt it much easier? whyyy
Again many thanks for your help and time.
antieco
Donator VIP
Donator VIP
 
Posts: 40
Joined: Thu Mar 14, 2019 4:13 pm

Re: How to install fvdw-sl

Postby antieco » Sat Mar 23, 2019 6:43 pm

got it! i can browse my files now!!
many thanks!
antieco
Donator VIP
Donator VIP
 
Posts: 40
Joined: Thu Mar 14, 2019 4:13 pm

Re: How to install fvdw-sl

Postby antieco » Sat Mar 23, 2019 7:30 pm

Hi most of the folders are empty??
antieco
Donator VIP
Donator VIP
 
Posts: 40
Joined: Thu Mar 14, 2019 4:13 pm

Re: How to install fvdw-sl

Postby fvdw » Sat Mar 23, 2019 9:34 pm

If you have performed a restore/recovery action they could be inside a folder with a name like this
/data/shares/1/data/Recovery

Read the topic of which I have send you the link a few post earlier
https://plugout.net/viewtopic.php?f=28&t=2499
fvdw
Site Admin - expert
 
Posts: 13472
Joined: Tue Apr 12, 2011 2:30 pm
Location: Netherlands

Re: How to install fvdw-sl

Postby antieco » Sun Mar 31, 2019 1:43 pm

hi, im on fvdw firmware! many thanks guys my nas is back alive.
im getting "Fail: can not retrieve the package, 203" when trying to install transmission, also cannot find plex packages..
many thanks again
antieco
Donator VIP
Donator VIP
 
Posts: 40
Joined: Thu Mar 14, 2019 4:13 pm

Re: How to install fvdw-sl

Postby antieco » Sun Mar 31, 2019 2:23 pm

ive just donated.. algo installed patch09
waiting for activation.
many thanks..
antieco
Donator VIP
Donator VIP
 
Posts: 40
Joined: Thu Mar 14, 2019 4:13 pm

Re: How to install fvdw-sl

Postby fvdw » Sun Mar 31, 2019 6:56 pm

Thank you much appreciated
you have been added to the donators group and should be able to download addons and patches
fvdw
Site Admin - expert
 
Posts: 13472
Joined: Tue Apr 12, 2011 2:30 pm
Location: Netherlands

Re: How to install fvdw-sl

Postby registroaplicacion » Fri Apr 05, 2019 10:07 pm

fvdw wrote:Thank you much appreciated
you have been added to the donators group and should be able to download addons and patches


Hi there!

I have also sent a donation. Just wanted to add that I very much appreciate all the (hard) effort and available solutions. Very grateful from my side.

Best regards!
registroaplicacion
Donator VIP
Donator VIP
 
Posts: 3
Joined: Thu Dec 12, 2013 7:34 pm

PreviousNext

Return to Lacie cloudbox (white casing)

Who is online

Users browsing this forum: No registered users and 30 guests