Problem finding Nas after upgrading to new firmware version

[leone101]

root@fvdw-sta-kirkwood:/ # mount
rootfs on / type rootfs (rw,size=59968k,nr_inodes=14992)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
none on /dev/pts type devpts (rw,relatime,mode=600)
/dev/sda7 on /sda7 type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)
dev/sda1 on /sda1 type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)
/dev/sda2 on /sda2 type ext3 (rw,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered)
root@fvdw-sta-kirkwood:/ # ls -1 /sda2
lacie-boot
root@fvdw-sta-kirkwood:/ #

this is

[Jocko]

Ok I understood the issue. You lost the firmware files on sda2.
It is a known issue, fixed with version 18.2:

18.2.3 bug fixes
- web-interface: firmware may be corrupted with inappropriate actions from the web-interface (do a page rollback or reload the firmware update menu whereas the upgrade script is still running)

So we go back to version 17.0

Code: Select all

mv /sda7/lacie-boot/sda2boot  /sda7/lacie-boot/sda1boot

Check you have only one file (sda1boot) in lacie-boot folder

Code: Select all

ls /sda7/lacie-boot

If yes, restart the nas. Check if all is ok and then try again to update to version 18.2 (so follow all instruction and nothing else up to click on the button "step3" to reboot the nas.

[leone101]

lacie-boot
root@fvdw-sta-kirkwood:/ # mv /sda7/lacie-boot/sda2boot /sda7/lacie-boot/sda1boot
root@fvdw-sta-kirkwood:/ # ls /sda7/lacie-boot
sda1boot
root@fvdw-sta-kirkwood:/ #

is ok?

[Jocko]

Be careful it is not the right command ! (you tried to rename the folder 'lacie-boot')
So

Code: Select all

mv /sda7/lacie-boot/sda2boot  /sda7/lacie-boot/sda1boot

[leone101]

Sorry i edited the right one

[leone101]

lacie-boot
root@fvdw-sta-kirkwood:/ # mv /sda7/lacie-boot/sda2boot /sda7/lacie-boot/sda1boot
root@fvdw-sta-kirkwood:/ # ls /sda7/lacie-boot
sda1boot
root@fvdw-sta-kirkwood:/ #

is ok?

I edited the right one now.
I think is ok….doesn't it?
How do you suggest to reboot nas?

[Jocko]

Yes you can reboot now

[leone101]

should i disconnect from telnet first or do i have command in telnet to reboot it?

[Jocko]

You just do the command

Code: Select all

reboot -f

on the telnet window

[leone101]

YES! :punk i'm again in!
:applause :applause :applause
U are the GURU :applause
Now i'm again in 17 firmware version….
According to u.....To upgrage directly to last version 18.2 should i use fvdw console?or should i try again to update from webinterface after uploading patch??
Thanks really much for your BIG help!