plugout.net

Alternative firmware fvdw-sl
SPD8020, Lacie network space vs1,vs2 and max, 5big version 1&2, 2big version 1&2, internet space vs1, edmini_v2, D2 network version 1&2, raspberry Pi b

Skip to content

Can't find nwsp2 on lan

Topic locked

Can't find nwsp2 on lan

Postby netokarys » Thu Aug 27, 2015 6:57 pm

Hello,

i have nwsp2 with 2TB HDD wich was running fvdw-sl firmware until it (HDD) broke down. Now i replaced it with new one, did all by instructions (partitioning, etc.), and now i can't find it on network (network assistant can't find it). In boot.log there is one line * Configuring LAN interface... cannot start udhcpc process. . Is this might be a problem?
There is all boot.log

start boot log
detect and set platform
nwsp2
UIMAGE-3142-NWSP2CL-2
nwsp2
mount dev/pts
update dev nodes
booting using root file system...
make dev node for buttons...
make dev node for tun device...
enable IP forwarding...
start buttons control daemon
device = nwsp2
source = buttons-nwsp2
buttons-nwsp2 daemon started
initializing date
Wed Nov 16 12:00:00 UTC 2011
create temporary passwd file
run udevstart to update dev nodes when necessary
inserting kernel modules:
create temporary group file
configure loopback netwerk interface
setting reboot and standby
nwsp2
rebootd-nwsp2
nwsp2
standbyd-nwsp2
starting php based setup routines step 1
* Finishing restore RAID devices... [ OK ]
* Found XML database configuration file... [ OK ]
* Updating Disks database... [ OK ]
* Starting mount of volumes...
- Mounting volume Default: [ OK ]
* Finishing mount of volumes... [ OK ]
* Starting udevd... [ OK ]
* Generating Hosts File... [ OK ]
* Configuring System Hostname... [ OK ]
* Configuring LAN interface... cannot start udhcpc process.
* Initializing Timezone... [ OK ]
* Starting web server... [ OK ]
* Starting mount of internal USB ...
* Finishing mount internal USB ... [ OK ]
* Configuring Disks... [ OK ]
* Configuring Samba... [ OK ]
* Configuring System Users...
Root password: use default password
Set users, linux and samba accounts [ OK ]
* Starting syncawayd... [ OK ]
* Starting Fvdw-sl Discovery Daemon... [ OK ]
start rpcbind service
starting php based setup routines step 2
* Starting dropbear... [ OK ]
* Kill temporary dropbear... [ OK ]
starting php based setup routines step 3
* Starting daemon update Hosts File... [ OK ]
* Starting mount of remote shares...
* Finishing mount shares... [ OK ]
starting php based setup routines step banner


*** fvdw-sl NAS firmware
This is fvdw-sl version: fvdw-sl 16.0
built on: Dec 28 2014

LAN IP address: (DHCP)

Port configuration:

LAN -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
else loop1 finished
rcS finished

Thanks for answer ;)
netokarys
 
Posts: 19
Joined: Thu Aug 28, 2014 7:33 am
Top

Re: Can't find nwsp2 on lan

Postby fvdw » Thu Aug 27, 2015 7:37 pm

yes this is the problem, now no ip address is assigned to the ethernet port
but which nas data base did you install ?
fvdw
Site Admin - expert
 
Posts: 13471
Joined: Tue Apr 12, 2011 2:30 pm
Location: Netherlands
Top

Re: Can't find nwsp2 on lan

Postby netokarys » Fri Aug 28, 2015 5:49 am

i installed fvdw-sl 16.0 (if that what you mean which database).
ps sorry for my english :)
and thanks for quick answer ;)
netokarys
 
Posts: 19
Joined: Thu Aug 28, 2014 7:33 am
Top

Re: Can't find nwsp2 on lan

Postby netokarys » Fri Aug 28, 2015 11:37 am

I also connect to nas over ttl and got this log:

(log starts the same i posted before)

*** fvdw-sl NAS firmware
This is fvdw-sl version: fvdw-sl 16.0
built on: Dec 28 2014

LAN IP address: (DHCP)

Port configuration:

LAN -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
else loop1 finished
rcS finished
/bin/sh: can't access tty; job control turned off
~ # ifonfig
/bin/sh: ifonfig: not found
netokarys
 
Posts: 19
Joined: Thu Aug 28, 2014 7:33 am
Top

Re: Can't find nwsp2 on lan

Postby netokarys » Fri Aug 28, 2015 12:24 pm

I have another question: is there any way to flash u-boot via putty over COM port
netokarys
 
Posts: 19
Joined: Thu Aug 28, 2014 7:33 am
Top

Re: Can't find nwsp2 on lan

Postby netokarys » Sat Aug 29, 2015 2:12 pm

I also forgot to say that my nwsp2 is lite (at least it looks like. I checked photos in the post about classic and lite versions)
There is full log:

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.08.29 10:55:41 =~=~=~=~=~=~=~=~=~=~=~=
_ ____ _
| | __ _ / ___(_) ___
| | / _` | | | |/ _ \
| |___ (_| | |___| | __/
|_____\__,_|\____|_|\___|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__| fvdw vs80
** LOADER **
** MARVELL BOARD: ASTON_NS LE
Hold rear button - long :

U-Boot 1.1.4 (Jan 7 2013 - 21:15:04) Marvell version: 3.4.16 LaCie 1.3.9 256MB fvdw gpt usbboot vs80

U-Boot code: 00600000 -> 006701D0 BSS: -> 006BDAE0

Soc: MV88F6192 Rev 3 (DDR2)
CPU running @ 800Mhz L2 running @ 400Mhz
SysClock = 200Mhz , TClock = 166Mhz

DRAM CAS Latency = 3 tRP = 3 tRAS = 9 tRCD=3
DRAM CS[0] base 0x00000000 size 256MB
DRAM Total size 256MB 16bit width
[512kB@f8000000] Flash: 512 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done

CPU : Marvell Feroceon (Rev 1)
.
Un-Protected 1 sectors
Erasing Flash...
.
Erased 1 sectors
Writing to Flash... done
.
Protected 1 sectors

Streaming disabled
Write allocate disabled


USB 0: host mode
PEX 0: interface detected no Link.
Net: egiga0 [PRIME]
egiga0 no link
Waiting for LUMP (3)
no lump receive; continuing
Hit any key to stop autoboot: 0

Reset IDE:
Marvell Serial ATA Adapter
Integrated Sata device found
[0 0 0]: Enable DMA mode
Device 0 @ 0 0:
Model: WDC WD30EFRX-68EUZN0 Firm: 82.00A82 Ser#: WD-WCC4N0CZAS10
Type: Hard Disk
Supports 48-bit addressing
Capacity: 2861588.4 MB = 2794.5 GB (5860533168 x 512)

GPT: Disk bigger then 2.2 TB !
GPT: U-boot can not write or read area above 2.2 TB, do not try !
GPT: skipping last lba check
## Valid EFI partition found ##

Loading from IDE device 0, partition 10: Name: gpt10 Type: U-Boot

** Bad Magic Number **

** Device 1 not available
GPT: Disk bigger then 2.2 TB !
GPT: U-boot can not write or read area above 2.2 TB, do not try !
GPT: skipping last lba check
## Valid EFI partition found ##

Loading from IDE device 0, partition 6: Name: gpt6 Type: U-Boot
Image Name: Linux-3.14.2
Created: 2014-10-26 19:30:12 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4727432 Bytes = 4.5 MB
Load Address: 00008000
Entry Point: 00008000
## Booting image at 00800000 ...
Image Name: Linux-3.14.2
Created: 2014-10-26 19:30:12 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4727432 Bytes = 4.5 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.2 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #2 PREEMPT Sun Oct 26 20:29:13 CET 2014
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: LaCie Network Space v2
[ 0.000000] Ignoring unrecognised tag 0x41000403
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro reset=0 productType=ASTON_KW GPT fvdw vs80
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 250220K/262144K available (6817K kernel code, 274K rwdata, 2068K rodata, 186K init, 250K bss, 11924K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc08b568c (8886 kB)
[ 0.000000] .init : 0xc08b6000 - 0xc08e4ac8 ( 187 kB)
[ 0.000000] .data : 0xc08e6000 - 0xc092abc0 ( 275 kB)
[ 0.000000] .bss : 0xc092abcc - 0xc0969674 ( 251 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:114
[ 0.000019] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
[ 14.792752] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[ 14.882694] pid_max: default: 32768 minimum: 301
[ 14.882873] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 14.882902] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 14.883693] CPU: Testing write buffer coherency: ok
[ 14.884219] Setting up static identity map for 0x67bf40 - 0x67bf98
[ 14.888957] VFP support v0.3: not present
[ 14.889812] xor: measuring software checksum speed
[ 14.982762] arm4regs : 725.600 MB/sec
[ 15.082702] 8regs : 436.000 MB/sec
[ 15.182685] 32regs : 603.200 MB/sec
[ 15.182709] xor: using function: arm4regs (725.600 MB/sec)
[ 15.182732] pinctrl core: initialized pinctrl subsystem
[ 15.183002] NET: Registered protocol family 16
[ 15.183848] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 15.188492] Kirkwood: MV88F6192-A1, TCLK=166666667.
[ 15.188532] Feroceon L2: Enabling L2
[ 15.188584] Feroceon L2: Cache support initialised.
[ 15.190141] mv_usb_init 1
[ 15.190167] mv_usb_init 2 devnum = 0
[ 15.190184] init function mv_usb_init finished
[ 15.190237] orion_mpp_conf: requested MPP12 config unavailable on this hardware
[ 15.190497] orion-ehci registered
[ 15.233730] bio: create slab <bio-0> at 0
[ 15.403506] raid6: int32x1 69 MB/s
[ 15.572712] raid6: int32x2 88 MB/s
[ 15.742803] raid6: int32x4 83 MB/s
[ 15.913178] raid6: int32x8 87 MB/s
[ 15.913191] raid6: using algorithm int32x2 (88 MB/s)
[ 15.913202] raid6: using intx1 recovery algorithm
[ 15.914398] SCSI subsystem initialized
[ 15.916261] usbcore: registered new interface driver usbfs
[ 15.916509] usbcore: registered new interface driver hub
[ 15.916780] usbcore: registered new device driver usb
[ 15.917361] Linux video capture interface: v2.00
[ 15.920509] cfg80211: Calling CRDA to update world regulatory domain
[ 15.921066] Switched to clocksource orion_clocksource
[ 15.924322] NET: Registered protocol family 2
[ 15.925026] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 15.925080] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 15.925124] TCP: Hash tables configured (established 2048 bind 2048)
[ 15.925219] TCP: reno registered
[ 15.925244] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 15.925277] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 15.925535] NET: Registered protocol family 1
[ 15.925939] RPC: Registered named UNIX socket transport module.
[ 15.925955] RPC: Registered udp transport module.
[ 15.925965] RPC: Registered tcp transport module.
[ 15.925976] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.926372] NetWinder Floating Point Emulator V0.97 (double precision)
[ 15.926589] gpio-usb-probe-4b err=0
[ 15.926612] gpio-usb gpio-usb: USB GPIO's initialized
[ 15.928664] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 16.095400] VFS: Disk quotas dquot_6.5.2
[ 16.095481] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.096142] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 16.096526] NTFS driver 2.1.30 [Flags: R/W].
[ 16.096571] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 16.096799] fuse init (API version 7.22)
[ 16.097685] JFS: nTxBlock = 1954, nTxLock = 15638
[ 16.098738] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 16.099288] msgmni has been set to 488
[ 16.100846] async_tx: api initialized (async)
[ 16.101115] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 16.101132] io scheduler noop registered
[ 16.101144] io scheduler deadline registered
[ 16.101171] io scheduler cfq registered (default)
[ 16.101711] mv_xor mv_xor.0: Marvell shared XOR driver
[ 16.132819] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 16.172709] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 16.173072] mv_xor mv_xor.1: Marvell shared XOR driver
[ 16.212707] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 16.252708] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 16.260864] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 16.282417] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[ 16.827583] console [ttyS0] enabled
[ 16.844661] brd: module loaded
[ 16.854490] loop: module loaded
[ 16.859865] sata_mv sata_mv.0: cannot get optional clkdev
[ 16.865834] sata_mv sata_mv.0: slots 32 ports 2
[ 16.874877] scsi0 : sata_mv
[ 16.878478] scsi1 : sata_mv
[ 16.881828] ata1: SATA max UDMA/133 irq 21
[ 16.886012] ata2: SATA max UDMA/133 irq 21
[ 16.893706] m25p80 spi0.0: mx25l4005a (512 Kbytes)
[ 16.898754] Creating 2 MTD partitions on "spi_flash":
[ 16.904025] 0x000000000000-0x00000007d000 : "u-boot"
[ 16.910678] 0x00000007e000-0x00000007f000 : "u-boot-env"
[ 16.917874] tun: Universal TUN/TAP device driver, 1.6
[ 16.923046] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 16.929443] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[ 16.938081] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[ 16.954342] libphy: orion_mdio_bus: probed
[ 16.958661] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 16.965849] libphy: PHY orion-mdio-mii:08 not found
[ 16.970739] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
[ 16.979033] PPP generic driver version 2.4.2
[ 16.983781] PPP Deflate Compression module registered
[ 16.988839] PPP MPPE Compression module registered
[ 16.993696] NET: Registered protocol family 24
[ 16.998378] usbcore: registered new interface driver rtl8187
[ 17.004343] usbcore: registered new interface driver rtl8192cu
[ 17.010422] usbcore: registered new interface driver rt2500usb
[ 17.016535] usbcore: registered new interface driver rt73usb
[ 17.022436] usbcore: registered new interface driver rt2800usb
[ 17.028554] usbcore: registered new interface driver ath9k_htc
[ 17.034474] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 17.042031] usbcore: registered new interface driver pegasus
[ 17.047966] usbcore: registered new interface driver asix
[ 17.053603] usbcore: registered new interface driver ax88179_178a
[ 17.059907] usbcore: registered new interface driver cdc_ether
[ 17.065960] usbcore: registered new interface driver net1080
[ 17.071832] usbcore: registered new interface driver cdc_subset
[ 17.077969] usbcore: registered new interface driver zaurus
[ 17.083872] usbcore: registered new interface driver ipheth
[ 17.089699] usbcore: registered new interface driver cdc_ncm
[ 17.096717] aoe: cannot create debugfs directory
[ 17.101512] aoe: AoE v85 initialised.
[ 17.106041] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[ 17.112097] i2c /dev entries driver
[ 17.117073] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[ 17.124729] uvcvideo: Unable to create debugfs directory
[ 17.130305] usbcore: registered new interface driver uvcvideo
[ 17.136144] USB Video Class driver (1.1.1)
[ 17.140228] gspca_main: v2.14.0 registered
[ 17.144615] usbcore: registered new interface driver Philips webcam
[ 17.152908] md: linear personality registered for level -1
[ 17.158374] md: raid0 personality registered for level 0
[ 17.163697] md: raid1 personality registered for level 1
[ 17.168984] md: raid10 personality registered for level 10
[ 17.174725] md: raid6 personality registered for level 6
[ 17.180016] md: raid5 personality registered for level 5
[ 17.185359] md: raid4 personality registered for level 4
[ 17.190935] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 17.199705] device-mapper: multipath: version 1.6.0 loaded
[ 17.205228] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 17.211727] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 17.218354] device-mapper: multipath service-time: version 0.2.0 loaded
[ 17.225065] device-mapper: dm-log-userspace: version 1.3.0 loaded
[ 17.231132] device-mapper: raid: Loading target version 1.5.2
[ 17.237249] leds-gpio: probe of leds-gpio failed with error -22
[ 17.245722] Netfilter messages via NETLINK v0.30.
[ 17.250482] nf_conntrack version 0.5.0 (3909 buckets, 15636 max)
[ 17.257125] ipip: IPv4 over IPv4 tunneling driver
[ 17.263242] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.268699] TCP: cubic registered
[ 17.272064] NET: Registered protocol family 10
[ 17.277808] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.283470] sit: IPv6 over IPv4 tunneling driver
[ 17.289327] NET: Registered protocol family 17
[ 17.293917] NET: Registered protocol family 5
[ 17.298412] NET: Registered protocol family 37
[ 17.304302] libphy: PHY orion-mdio-mii:08 not found
[ 17.309206] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
[ 17.317818] console [netcon0] enabled
[ 17.321470] netconsole: network logging started
[ 17.326681] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 17.333945] libphy: PHY orion-mdio-mii:08 not found
[ 17.338835] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
[ 17.347215] rtc-mv rtc-mv: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 17.392688] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 17.412931] ata1.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 17.419610] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 17.442915] ata1.00: configured for UDMA/133
[ 17.463076] scsi 0:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 82.0 PQ: 0 ANSI: 5
[ 17.471897] fvdw1 disk index before get_sd_name = 0
[ 17.476829] No LaCie disk map available
[ 17.480645] fvdw2 disk index after get_sd_name = 0
[ 17.485454] fvdw3 prefix[0]=s prefix[1]=d
[ 17.489536] fvdw4 diskname = sda
[ 17.493379] libphy: PHY orion-mdio-mii:08 not found
[ 17.498273] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
[ 17.506614] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 17.515051] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 17.520636] sd 0:0:0:0: [sda] Write Protect is off
[ 17.525627] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.583448] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 17.592987] sd 0:0:0:0: [sda] Attached SCSI disk
[ 17.862669] ata2: SATA link down (SStatus 0 SControl F300)
[ 17.882719] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[ 17.930280] EXT3-fs (sda7): recovery required on readonly filesystem
[ 17.936678] EXT3-fs (sda7): write access will be enabled during recovery
[ 18.382950] kjournald starting. Commit interval 5 seconds
[ 18.422946] EXT3-fs (sda7): recovery complete
[ 18.427291] EXT3-fs (sda7): mounted filesystem with ordered data mode
[ 18.433770] VFS: Mounted root (ext3 filesystem) readonly on device 8:7.
[ 18.441172] Freeing unused kernel memory: 184K (c08b6000 - c08e4000)
start rcS
set global environment params
mount proc
remount root file system rw
[ 18.671299] EXT3-fs (sda7): using internal journal
mount sysfs
start boot log
detect and set platform
nwsp2
mkdir: can't create directory '/dev/pts': File exists
mount dev/pts
update dev nodes
booting using root file system...
mknod: /dev/null: File exists
make dev node for buttons...
mkdir: can't create directory '/dev/input': File exists
mknod: /dev/input/event0: File exists
make dev node for tun device...
mknod: /dev/net/tun: File exists
enable IP forwarding...
start buttons control daemon
Wed Nov 16 12:00:00 UTC 2011
create temporary passwd file
run udevstart to update dev nodes when necessary
mkdir: can't create directory 'rw_fs': File exists
[ 19.362959] kjournald starting. Commit interval 5 seconds
[ 19.368500] EXT3-fs (sda5): using internal journal
[ 19.412737] EXT3-fs (sda5): recovery complete
[ 19.417080] EXT3-fs (sda5): mounted filesystem with ordered data mode
Setting up swapspace version 1, size = 536866816 bytes
[ 19.488102] random: mkswap urandom read with 74 bits of entropy available
UUID=19d2ae1a-7932-49ab-bfa8-3f78567cbea7
[ 19.534717] Adding 524284k swap on /dev/sda3. Priority:-1 extents:1 across:524284k
inserting kernel modules:
[ 19.864563] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 19.872029] ehci-orion: EHCI orion driver
[ 19.876303] orion-ehci orion-ehci.0: EHCI Host Controller
[ 19.881720] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 19.889467] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 19.912668] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 19.918767] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 19.925551] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.932758] usb usb1: Product: EHCI Host Controller
[ 19.937616] usb usb1: Manufacturer: Linux 3.14.2 ehci_hcd
[ 19.943012] usb usb1: SerialNumber: orion-ehci.0
[ 19.948292] hub 1-0:1.0: USB hub found
[ 19.952072] hub 1-0:1.0: 1 port detected
[ 19.956251] libphy: PHY orion-mdio-mii:08 not found
[ 19.961148] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
[ 19.984864] usbcore: registered new interface driver usb-storage
[ 20.003112] usbcore: registered new interface driver usblp
[ 20.024179] iSCSI Enterprise Target Software - version trunk
[ 20.029934] iscsi_trgt: Registered io type fileio
[ 20.034735] iscsi_trgt: Registered io type blockio
[ 20.039512] iscsi_trgt: Registered io type nullio
[ 20.060211] Loading iSCSI transport class v2.0-870.
[ 20.072253] iscsi: registered transport (tcp)
create temporary group file
configure loopback network interface
setting reboot and standby
starting php based setup routines step 1
[ 31.176391] random: nonblocking pool is initialized
[ 31.902701] kjournald starting. Commit interval 5 seconds
[ 31.913905] EXT3-fs (sda8): using internal journal
[ 31.992752] EXT3-fs (sda8): recovery complete
[ 31.997093] EXT3-fs (sda8): mounted filesystem with ordered data mode
[ 32.045580] udevd (801): /proc/801/oom_adj is deprecated, please use /proc/801/oom_score_adj instead.
[ 32.054901] udev: starting version 130
API[2011/11/16 12:00:15] laniffunc_configure.finc(85)[759]: laniffunc_configure ifconfig -a eth0 192.168.0.252 FAILED!
API[2011/11/16 12:00:15] laniffunc_configure.finc(102)[759]: laniffunc_configure ifconfig eth0 up FAILED!
ifconfig: eth0: error fetching interface information: Device not found
passwd[1066]: password for `dummy' changed by user `root'

API[2011/11/16 12:00:19] userfunc_users_commit.finc(144)[759]: userfunc_users_commit: no smb user for dummy.
start rpcbind service
starting php based setup routines step2
starting php based setup routines step3
[ 41.112076] warning: `proftpd' uses 32-bit capabilities (legacy support in use)
API[2011/11/16 12:00:22] ftpfunc_restart.finc(509)[1115]: Error: cannot run proftpd in ftpfunc_restart() [1].
starting php based setup routines step banner
ifconfig: eth0: error fetching interface information: Device not found
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
LED name unknown: frontred !
LED name unknown: frontred !
LED name unknown: frontred !
LED name unknown: frontred !
------------------------
rcS finished
------------------------
list boot.log file
start boot log
detect and set platform
nwsp2
UIMAGE-3142-NWSP2CL-2
nwsp2
mount dev/pts
update dev nodes
booting using root file system...
make dev node for buttons...
make dev node for tun device...
enable IP forwarding...
start buttons control daemon
device = nwsp2
source = buttons-nwsp2
buttons-nwsp2 daemon started
initializing date
Wed Nov 16 12:00:00 UTC 2011
create temporary passwd file
run udevstart to update dev nodes when necessary
inserting kernel modules:
create temporary group file
configure loopback netwerk interface
setting reboot and standby
nwsp2
rebootd-nwsp2
nwsp2
standbyd-nwsp2
starting php based setup routines step 1
* Finishing restore RAID devices... [ OK ]
* Found XML database configuration file... [ OK ]
* Updating Disks database... [ OK ]
* Starting mount of volumes...
- Mounting volume Default: [ OK ]
* Finishing mount of volumes... [ OK ]
* Starting udevd... [ OK ]
* Generating Hosts File... [ OK ]
* Configuring System Hostname... [ OK ]
* Configuring LAN interface... [ OK ]
* Initializing Timezone... [ OK ]
* Starting web server... [ OK ]
* Starting mount of internal USB ...
* Finishing mount internal USB ... [ OK ]
* Configuring Disks... [ OK ]
* Configuring Samba... [ OK ]
* Configuring System Users...
Root password: use default password
Set users, linux and samba accounts [ OK ]
* Starting syncawayd... [ OK ]
* Starting Fvdw-sl Discovery Daemon... [ OK ]
start rpcbind service
starting php based setup routines step 2
* Starting dropbear... [ OK ]
* Kill temporary dropbear... [ OK ]
starting php based setup routines step 3
* Starting daemon update Hosts File... [ OK ]
* Starting mount of remote shares...
* Finishing mount shares... [ OK ]
* Starting FTP Service... [ FAIL ]
starting php based setup routines step banner


*** fvdw-sl NAS firmware
This is fvdw-sl version: fvdw-sl 16.0
built on: Dec 28 2014

LAN IP address: (static)

Port configuration:

LAN -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
else loop1 finished
rcS finished
/bin/sh: can't access tty; job control turned off
~ # prinytenv
USER=root
HOME=/
productType=ASTON_KW
TERM=vt102
PATH=/sbin:/usr/sbin:/bin:/usr/bin
RUNLEVEL=GPT
SHELL=/bin/sh
reset=0
PWD=/
~ # dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.2 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #2 PREEMPT Sun Oct 26 20:29:13 CET 2014
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: LaCie Network Space v2
[ 0.000000] Ignoring unrecognised tag 0x41000403
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c092a368, node_mem_map cfdfb000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65536 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro reset=0 productType=ASTON_KW GPT fvdw vs80
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 250220K/262144K available (6817K kernel code, 274K rwdata, 2068K rodata, 186K init, 250K bss, 11924K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc08b568c (8886 kB)
[ 0.000000] .init : 0xc08b6000 - 0xc08e4ac8 ( 187 kB)
[ 0.000000] .data : 0xc08e6000 - 0xc092abc0 ( 275 kB)
[ 0.000000] .bss : 0xc092abcc - 0xc0969674 ( 251 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:114
[ 0.000019] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
[ 14.792752] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[ 14.882694] pid_max: default: 32768 minimum: 301
[ 14.882873] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 14.882902] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 14.883693] CPU: Testing write buffer coherency: ok
[ 14.884219] Setting up static identity map for 0x67bf40 - 0x67bf98
[ 14.888957] VFP support v0.3: not present
[ 14.889812] xor: measuring software checksum speed
[ 14.982762] arm4regs : 725.600 MB/sec
[ 15.082702] 8regs : 436.000 MB/sec
[ 15.182685] 32regs : 603.200 MB/sec
[ 15.182709] xor: using function: arm4regs (725.600 MB/sec)
[ 15.182732] pinctrl core: initialized pinctrl subsystem
[ 15.183002] NET: Registered protocol family 16
[ 15.183848] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 15.188492] Kirkwood: MV88F6192-A1, TCLK=166666667.
[ 15.188532] Feroceon L2: Enabling L2
[ 15.188584] Feroceon L2: Cache support initialised.
[ 15.190141] mv_usb_init 1
[ 15.190167] mv_usb_init 2 devnum = 0
[ 15.190184] init function mv_usb_init finished
[ 15.190196] initial MPP regs: 01112222 00003311 00551100 00000000 00000000 00000000 00000000
[ 15.190237] orion_mpp_conf: requested MPP12 config unavailable on this hardware
[ 15.190250] final MPP regs: 01112222 00003311 00551100 00000000 00000000 00000000 00000000
[ 15.190497] orion-ehci registered
[ 15.233730] bio: create slab <bio-0> at 0
[ 15.403506] raid6: int32x1 69 MB/s
[ 15.572712] raid6: int32x2 88 MB/s
[ 15.742803] raid6: int32x4 83 MB/s
[ 15.913178] raid6: int32x8 87 MB/s
[ 15.913191] raid6: using algorithm int32x2 (88 MB/s)
[ 15.913202] raid6: using intx1 recovery algorithm
[ 15.914398] SCSI subsystem initialized
[ 15.915042] libata version 3.00 loaded.
[ 15.916261] usbcore: registered new interface driver usbfs
[ 15.916509] usbcore: registered new interface driver hub
[ 15.916780] usbcore: registered new device driver usb
[ 15.917361] Linux video capture interface: v2.00
[ 15.920509] cfg80211: Calling CRDA to update world regulatory domain
[ 15.921066] Switched to clocksource orion_clocksource
[ 15.924322] NET: Registered protocol family 2
[ 15.925026] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 15.925080] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 15.925124] TCP: Hash tables configured (established 2048 bind 2048)
[ 15.925219] TCP: reno registered
[ 15.925244] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 15.925277] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 15.925535] NET: Registered protocol family 1
[ 15.925939] RPC: Registered named UNIX socket transport module.
[ 15.925955] RPC: Registered udp transport module.
[ 15.925965] RPC: Registered tcp transport module.
[ 15.925976] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.925992] PCI: CLS 0 bytes, default 32
[ 15.926372] NetWinder Floating Point Emulator V0.97 (double precision)
[ 15.926589] gpio-usb-probe-4b err=0
[ 15.926612] gpio-usb gpio-usb: USB GPIO's initialized
[ 15.928664] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 16.095400] VFS: Disk quotas dquot_6.5.2
[ 16.095481] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.096142] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 16.096526] NTFS driver 2.1.30 [Flags: R/W].
[ 16.096571] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 16.096799] fuse init (API version 7.22)
[ 16.097685] JFS: nTxBlock = 1954, nTxLock = 15638
[ 16.098738] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 16.099288] msgmni has been set to 488
[ 16.100846] async_tx: api initialized (async)
[ 16.101115] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 16.101132] io scheduler noop registered
[ 16.101144] io scheduler deadline registered
[ 16.101171] io scheduler cfq registered (default)
[ 16.101711] mv_xor mv_xor.0: Marvell shared XOR driver
[ 16.132819] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 16.172709] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 16.173072] mv_xor mv_xor.1: Marvell shared XOR driver
[ 16.212707] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 16.252708] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 16.260864] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 16.282417] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[ 16.827583] console [ttyS0] enabled
[ 16.844661] brd: module loaded
[ 16.854490] loop: module loaded
[ 16.859748] sata_mv sata_mv.0: version 1.28
[ 16.859865] sata_mv sata_mv.0: cannot get optional clkdev
[ 16.865834] sata_mv sata_mv.0: slots 32 ports 2
[ 16.874877] scsi0 : sata_mv
[ 16.878478] scsi1 : sata_mv
[ 16.881828] ata1: SATA max UDMA/133 irq 21
[ 16.886012] ata2: SATA max UDMA/133 irq 21
[ 16.893706] m25p80 spi0.0: mx25l4005a (512 Kbytes)
[ 16.898754] Creating 2 MTD partitions on "spi_flash":
[ 16.904025] 0x000000000000-0x00000007d000 : "u-boot"
[ 16.910678] 0x00000007e000-0x00000007f000 : "u-boot-env"
[ 16.917874] tun: Universal TUN/TAP device driver, 1.6
[ 16.923046] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 16.929443] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[ 16.938081] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[ 16.954342] libphy: orion_mdio_bus: probed
[ 16.958661] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 16.965849] libphy: PHY orion-mdio-mii:08 not found
[ 16.970739] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
[ 16.979033] PPP generic driver version 2.4.2
[ 16.983781] PPP Deflate Compression module registered
[ 16.988839] PPP MPPE Compression module registered
[ 16.993696] NET: Registered protocol family 24
[ 16.998378] usbcore: registered new interface driver rtl8187
[ 17.004343] usbcore: registered new interface driver rtl8192cu
[ 17.010422] usbcore: registered new interface driver rt2500usb
[ 17.016535] usbcore: registered new interface driver rt73usb
[ 17.022436] usbcore: registered new interface driver rt2800usb
[ 17.028554] usbcore: registered new interface driver ath9k_htc
[ 17.034474] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 17.042031] usbcore: registered new interface driver pegasus
[ 17.047966] usbcore: registered new interface driver asix
[ 17.053603] usbcore: registered new interface driver ax88179_178a
[ 17.059907] usbcore: registered new interface driver cdc_ether
[ 17.065960] usbcore: registered new interface driver net1080
[ 17.071832] usbcore: registered new interface driver cdc_subset
[ 17.077969] usbcore: registered new interface driver zaurus
[ 17.083872] usbcore: registered new interface driver ipheth
[ 17.089699] usbcore: registered new interface driver cdc_ncm
[ 17.096717] aoe: cannot create debugfs directory
[ 17.101512] aoe: AoE v85 initialised.
[ 17.106041] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[ 17.112097] i2c /dev entries driver
[ 17.117073] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[ 17.124729] uvcvideo: Unable to create debugfs directory
[ 17.130305] usbcore: registered new interface driver uvcvideo
[ 17.136144] USB Video Class driver (1.1.1)
[ 17.140228] gspca_main: v2.14.0 registered
[ 17.144615] usbcore: registered new interface driver Philips webcam
[ 17.152908] md: linear personality registered for level -1
[ 17.158374] md: raid0 personality registered for level 0
[ 17.163697] md: raid1 personality registered for level 1
[ 17.168984] md: raid10 personality registered for level 10
[ 17.174725] md: raid6 personality registered for level 6
[ 17.180016] md: raid5 personality registered for level 5
[ 17.185359] md: raid4 personality registered for level 4
[ 17.190935] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 17.199705] device-mapper: multipath: version 1.6.0 loaded
[ 17.205228] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 17.211727] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 17.218354] device-mapper: multipath service-time: version 0.2.0 loaded
[ 17.225065] device-mapper: dm-log-userspace: version 1.3.0 loaded
[ 17.231132] device-mapper: raid: Loading target version 1.5.2
[ 17.237206] orion_gpio_is_valid: invalid GPIO 12
[ 17.237222] orion_gpio_is_valid: invalid GPIO 12
[ 17.237249] leds-gpio: probe of leds-gpio failed with error -22
[ 17.245722] Netfilter messages via NETLINK v0.30.
[ 17.250482] nf_conntrack version 0.5.0 (3909 buckets, 15636 max)
[ 17.257125] ipip: IPv4 over IPv4 tunneling driver
[ 17.263242] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.268699] TCP: cubic registered
[ 17.272064] NET: Registered protocol family 10
[ 17.277808] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.283470] sit: IPv6 over IPv4 tunneling driver
[ 17.289327] NET: Registered protocol family 17
[ 17.293917] NET: Registered protocol family 5
[ 17.298412] NET: Registered protocol family 37
[ 17.304302] libphy: PHY orion-mdio-mii:08 not found
[ 17.309206] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
[ 17.317818] console [netcon0] enabled
[ 17.321470] netconsole: network logging started
[ 17.326681] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 17.333945] libphy: PHY orion-mdio-mii:08 not found
[ 17.338835] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
[ 17.347215] rtc-mv rtc-mv: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 17.392688] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 17.412931] ata1.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 17.419610] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 17.442915] ata1.00: configured for UDMA/133
[ 17.463076] scsi 0:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 82.0 PQ: 0 ANSI: 5
[ 17.471897] fvdw1 disk index before get_sd_name = 0
[ 17.476829] No LaCie disk map available
[ 17.480645] fvdw2 disk index after get_sd_name = 0
[ 17.485454] fvdw3 prefix[0]=s prefix[1]=d
[ 17.489536] fvdw4 diskname = sda
[ 17.493379] libphy: PHY orion-mdio-mii:08 not found
[ 17.498273] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
[ 17.506614] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 17.515051] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 17.520636] sd 0:0:0:0: [sda] Write Protect is off
[ 17.525472] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.525627] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.583448] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 17.592987] sd 0:0:0:0: [sda] Attached SCSI disk
[ 17.862669] ata2: SATA link down (SStatus 0 SControl F300)
[ 17.882719] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[ 17.930280] EXT3-fs (sda7): recovery required on readonly filesystem
[ 17.936678] EXT3-fs (sda7): write access will be enabled during recovery
[ 18.382950] kjournald starting. Commit interval 5 seconds
[ 18.422946] EXT3-fs (sda7): recovery complete
[ 18.427291] EXT3-fs (sda7): mounted filesystem with ordered data mode
[ 18.433770] VFS: Mounted root (ext3 filesystem) readonly on device 8:7.
[ 18.441172] Freeing unused kernel memory: 184K (c08b6000 - c08e4000)
[ 18.671299] EXT3-fs (sda7): using internal journal
[ 19.362959] kjournald starting. Commit interval 5 seconds
[ 19.368500] EXT3-fs (sda5): using internal journal
[ 19.412737] EXT3-fs (sda5): recovery complete
[ 19.417080] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 19.488102] random: mkswap urandom read with 74 bits of entropy available
[ 19.534717] Adding 524284k swap on /dev/sda3. Priority:-1 extents:1 across:524284k
[ 19.864563] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 19.872029] ehci-orion: EHCI orion driver
[ 19.876303] orion-ehci orion-ehci.0: EHCI Host Controller
[ 19.881720] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 19.889467] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 19.912668] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 19.918767] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 19.925551] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.932758] usb usb1: Product: EHCI Host Controller
[ 19.937616] usb usb1: Manufacturer: Linux 3.14.2 ehci_hcd
[ 19.943012] usb usb1: SerialNumber: orion-ehci.0
[ 19.948292] hub 1-0:1.0: USB hub found
[ 19.952072] hub 1-0:1.0: 1 port detected
[ 19.956251] libphy: PHY orion-mdio-mii:08 not found
[ 19.961148] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
[ 19.984864] usbcore: registered new interface driver usb-storage
[ 20.003112] usbcore: registered new interface driver usblp
[ 20.024179] iSCSI Enterprise Target Software - version trunk
[ 20.029934] iscsi_trgt: Registered io type fileio
[ 20.034735] iscsi_trgt: Registered io type blockio
[ 20.039512] iscsi_trgt: Registered io type nullio
[ 20.060211] Loading iSCSI transport class v2.0-870.
[ 20.072253] iscsi: registered transport (tcp)
[ 31.176391] random: nonblocking pool is initialized
[ 31.902701] kjournald starting. Commit interval 5 seconds
[ 31.913905] EXT3-fs (sda8): using internal journal
[ 31.992752] EXT3-fs (sda8): recovery complete
[ 31.997093] EXT3-fs (sda8): mounted filesystem with ordered data mode
[ 32.045580] udevd (801): /proc/801/oom_adj is deprecated, please use /proc/801/oom_score_adj instead.
[ 32.054901] udev: starting version 130
[ 41.112076] warning: `proftpd' uses 32-bit capabilities (legacy support in use)
~ # exit
/bin/sh: can't access tty; job control turned off
~ #
netokarys
 
Posts: 19
Joined: Thu Aug 28, 2014 7:33 am
Top

Re: Can't find nwsp2 on lan

Postby fvdw » Sat Aug 29, 2015 3:53 pm

well this device is clearly a classic and not a lite.
It reports 256 MB mem, the lite has only 128 MB
Furthermore it seems you or someelse has already put the u-boot in flash. If it would have been a liet and you used that u-boot version it would have bricked your nas.

I see this in your post
*** fvdw-sl NAS firmware
This is fvdw-sl version: fvdw-sl 16.0
built on: Dec 28 2014

LAN IP address: (static)

It menas you have set a static ip address ??

Anyhow as you have serial console access it is easy to check things out.
Give command
Code: Select all
ifconfig eth0

to see what is going on with the etehernet interface. If it has no ip then set one
To set an ip fore for eaxample to 192.168.1.100 use
Code: Select all
ifconfig eth0 192.168.1.100

check again after giving this command if the interface has an ip, if so you should be able to login using this ip
fvdw
Site Admin - expert
 
Posts: 13471
Joined: Tue Apr 12, 2011 2:30 pm
Location: Netherlands
Top

Re: Can't find nwsp2 on lan

Postby netokarys » Mon Aug 31, 2015 5:26 am

Hello, i got this:

ifconfig: eth0: error fetching interface information: Device not found
~ # ifconfig eth0 192.168.0.152
ifconfig: SIOCSIFADDR: No such device
~ #

i also take a photo of my board (please see attachment).

It is lite version, if photos in post about lite and classic versions is true...
You do not have the required permissions to view the files attached to this post.
netokarys
 
Posts: 19
Joined: Thu Aug 28, 2014 7:33 am
Top

Re: Can't find nwsp2 on lan

Postby netokarys » Mon Aug 31, 2015 8:49 am

Can you please send instruction how to flash uboot over ttl or usb port, and the good uboot image for this device (now i'm lost is it lite or classic...)
netokarys
 
Posts: 19
Joined: Thu Aug 28, 2014 7:33 am
Top

Re: Can't find nwsp2 on lan

Postby fvdw » Mon Aug 31, 2015 7:42 pm

The picture you post is from a nwsp2 lite, however the output of dmesg and serial console you posted shows output of a nwsp2 classic

what does this command give as output
Code: Select all
cat /proc/cpuinfo


(ps if ifconfig eth0 doesn't find your ethernet card I am afraid that it is broken

It should look something like this
Code: Select all
root@nwsp2-3:/ # ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 00:D0:4B:8F:51:26
          inet addr:192.168.1.200  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::2d0:4bff:fe8f:5126/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2527457 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2095485 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1110840524 (1.0 GiB)  TX bytes:410943845 (391.9 MiB)
          Interrupt:11

root@nwsp2-3:/ #
)
fvdw
Site Admin - expert
 
Posts: 13471
Joined: Tue Apr 12, 2011 2:30 pm
Location: Netherlands
Top
Next
Topic locked

Return to Lacie Network Space vs2 and max version

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB® Forum Software © phpBB Group