[SOLVED] After a firmware upgrade, blinking blue, lost 5Big2

[Jocko]

so md4 was already assembled.

now you can try to mount them

[Glaven Clattuck]

no way...

Code: Select all

root@fvdw-sta-kirkwood:/ # /usr/sbin/mount /dev/md1 /md1
mount: mount point /md1 does not exist
root@fvdw-sta-kirkwood:/ # /usr/sbin/mount /dev/md0 /md0
mount: mount point /md0 does not exist
root@fvdw-sta-kirkwood:/ # /usr/sbin/mount /dev/md2 /md2
mount: mount point /md2 does not exist
root@fvdw-sta-kirkwood:/ # /usr/sbin/mount /dev/md4 /md4
mount: mount point /md4 does not exist


[Jocko]

You did not create the mountpoint

Code: Select all

mkdir /md0 /md1 /md2 /md4

[Glaven Clattuck]

You did not create the mountpoint

Code: Select all

mkdir /md0 /md1 /md2 /md4

sorry.
Done, and now? :scratch

[Jocko]

then retry to mount the md devices

[Glaven Clattuck]

then retry to mount the md devices

I meant that I had already done it.
Sorry for the unclear answer.

Code: Select all

root@fvdw-sta-kirkwood:/ # mkdir /md0 /md1 /md2 /md4
root@fvdw-sta-kirkwood:/ # /usr/sbin/mount /dev/md1 /md1
root@fvdw-sta-kirkwood:/ # /usr/sbin/mount /dev/md0 /md0
root@fvdw-sta-kirkwood:/ # /usr/sbin/mount /dev/md4 /md4
root@fvdw-sta-kirkwood:/ # /usr/sbin/mount /dev/md2 /md2

[Jocko]

As there is no error with the mount commands that means your raid devices are clean (and also the fs on them) and nothing to deepen on this side.

Now, you need to wait fvdw maybe he has some ideas to fix the boot issue

Note: do you know if your 5big2 is a diskless version (buy without disk)

[Glaven Clattuck]

As there is no error with the mount commands that means your raid devices are clean (and also the fs on them) and nothing to deepen on this side.

Now, you need to wait fvdw maybe he has some ideas to fix the boot issue

Note: do you know if your 5big2 is a diskless version (buy without disk)

Thanks @jocko like always.
Yes, i bought the 5Big diskless

[Jocko]

As it is a diskless, if we do not succeed to restore the firmware, you will be able to :

- Transfer your data by using fvdw-sl console
- Overwrite the firmware (factory reset with losing data)

and then store back the data on the NAS.

What was the data size on your NAS ?

[Glaven Clattuck]

Huge.
14TB......