Lacie 5bign_v2 support

[Draftmancorp]

Code: Select all

login as: root
root@192.168.1.189's password:
root@fvdwsl-base:/ # dd if=/share/1000/public/fvdw-sl-14-1-5big2-17may2013.img of=/dev/sda1
^[512000+0 records in
512000+0 records out
root@fvdwsl-base:/ #


[Draftmancorp]

i think that "^" is my finger mistake.

[fvdw]

ok now give as command in putty

Code: Select all

touch /lacie-boot/sda1boot

do not reboot when this gives an error
If it is ok then

Code: Select all

sync
reboot -f

Also close your browser to clear caches open it as soon as the nas has rebooted

[Jocko]

I just tested the firmware image and my NAS restarted without isssue :applause

[fvdw]

so better Draftmancorp comes up with good news as well... :vhcool

[Draftmancorp]

Code: Select all

login as: root
root@192.168.1.189's password:
root@fvdwsl-base:/ # touch /lacie-boot/sda1boot
root@fvdwsl-base:/ # sync
root@fvdwsl-base:/ # reboot -f


ok.....now is rebooting...

[fvdw]

after booting connect with webinterface to see if 14-1 is online
Also connect with putty and post output of

Code: Select all

cat boot.log

[Draftmancorp]

Yes, i see 14-1 in web interface

Code: Select all

login as: root
root@192.168.1.189's password:
root@fvdwsl-base:/ # cat boot.log
start boot log
booting using sda1 root file system...
make dev node for buttons...
make dev node for tun device...
enable IP forwarding...
start buttons control daemon
buttons-nwsp2 daemon started
Tue Jul 24 02:17:50 GMT+1 2012
run udevstart to update dev nodes when necessary
inserting kernel modules:
configure loopback netwerk interface
starting php based setup routines step 1


 * Starting syslogd... mwexec(): /sbin/syslogd
                                 [ OK ]
mwexec(): chown 99:99 /tmp/etc/nas_conf_vltl.xml

 * Initial XML configuration file...     [ OK ]
 * Configuring Disks... mwexec(): /usr/sbin/noflushd -n 15 /dev/sda
                                 [ OK ]
 * Configuring System Users...
        Root password: use default password
        Set usersmwexec(): /usr/bin/passwd -P dummy dummy
mwexec(): /usr/bin/smbpasswd -e 'dummy'
, linux and samba accounts       [ OK ]
 * Starting mount of volumes...
   - Mounting volume Disk1:                      [ OK ]
   - Mounting volume Disk2:                      [ OK ]
   - Mounting volume Disk3:                      [ OK ]
   - Mounting volume Disk4:                      [ OK ]
   - Mounting volume Disk5:                      [ OK ]
 * Finishing mount of volumes...                 [ OK ]
 * Generating Hosts File...                      [ OK ]
 * Configuring System Hostname... mwexec(): /usr/bin/hostname 'fvdwsl-base.local'
                 [ OK ]
 * Configuring Samba...                                  [ OK ]
 * Configuring LAN interface... mwexec(): /sbin/ifconfig -a 'eth0' 169.254.212.147 netmask 255.255.0.0
mwexec(): /sbin/ifconfig 'eth0' up
mwexec(): /sbin/udhcpc -b -i 'eth0' -s /etc/api/api_dhcpc.php dhcpdCbScript
                 [ OK ]
 * Starting udevd... mwexec(): /sbin/udevstart
mwexec(): /sbin/udevd
                                         [ OK ]
 * Starting web server... mwexec(): rm /etc/webdav.conf
mwexec(): chmod 644 /etc/webdav.conf
mwexec(): /usr/bin/httpd -f httpd.conf -d /etc
                                 [ OK ]
 * Initializing Timezone... mwexec(): ln -sf /usr/share/zoneinfo/Etc/GMT+1 /etc/localtime
                         [ OK ]
mwexec(): /usr/bin/killall  smbd
mwexec(): /usr/bin/killall  nmbd
 * Configuring Samba...                                  [ OK ]
mwexec(): /usr/bin/killall  smbd
mwexec(): /usr/bin/killall  nmbd
mwexec(): /usr/sbin/nmbd -D -l /var/log/samba
mwexec(): /usr/sbin/smbd -D -l /var/log/samba
mwexec(): cat /etc/nas_services | grep TG | grep syncawayd
 * Starting syncawayd... mwexec(): /usr/bin/killall  syncawayd
mwexec(): /usr/sbin/syncawayd -n 3
                                 [ OK ]
start portmap service
starting php based setup routines step 2


mwexec(): chmod 755 /rw_fs/etc/dropbear
mwexec(): chmod 600 /rw_fs/etc/dropbear/dropbear_rsa_host_key
mwexec(): sudo chmod 777 '/rw_fs/.ssh'
mwexec(): sudo chmod 700 '/rw_fs/.ssh'
 * Starting dropbear... mwexec(): dropbear -p 22 -r '/rw_fs/etc/dropbear/dropbear_rsa_host_key'
                                 [ OK ]
mwexec(): sudo chmod 777 /etc/profile
mwexec(): sudo chmod 644 /etc/profile
 * Kill temporary dropbear...mwexec(): kill -9 700
                         [ OK ]
 * Starting daemon update Hosts File... mwexec(): /usr/sbin/hostd 7200
 [ OK ]
mwexec(): /bin/chmod 777 /var/spool/mqueue
mwexec(): /bin/chown 0:0 /var/spool/mqueue
mwexec(): /bin/chmod 777 /var/spool/clientmqueue
mwexec(): /bin/chown 0:0 /var/spool/clientmqueue
mwexec(): ln -s /share/1000/twonkymedia/twonky /var/twonky
starting php based setup routines step banner


*** fvdw-sl NAS firmware
    This is fvdw-sl version: fvdw-sl 14.1
    built on: May 12 2013

    LAN IP address: 192.168.1.189 (DHCP)

    Port configuration:

    LAN   -> eth0
php based setup routines finished
web permission on resolv.conf
set device tuning for dms performance
rcS finished
root@fvdwsl-base:/ #


[Jocko]

That seems good :applause :applause
and about the web-interface ?---edit I didn't read your first line--

To check if the spindown bug is fix, give in Putty the command

Code: Select all

ps axf

and post also the output

[fvdw]

:bananadance done :beer: :beer: :beer:

seems to be running fine...its enoughh for today, you can explore the firmware now if you want.
This weekend we still should check some logs files but I expect it should run fine.