Lacie 5bign_v2 support

[Draftmancorp]

yes i remember thanks :)

i have to format only last 3 Disks. so i must use ONLY sdc, sde and sdd right?

[Jocko]

Just the total size is wrong but we know how to fix it...

Think we must also change the colors for disk 3,4 and 5.

fdisk doesn't allow me to check if you didn't swap a disk so make this command

Code: Select all

 grep -H . /sys/block/sd*/device/model

and post its output

[Draftmancorp]

Code: Select all

 login as: root
root@192.168.1.189's password:
root@fvdwsl-base:/ # grep -H . /sys/block/sd*/device/model
/sys/block/sda/device/model:ST2000DL001-9VT1
/sys/block/sdb/device/model:ST2000DL001-9VT1
/sys/block/sdc/device/model:ST2000DL001-9VT1
/sys/block/sdd/device/model:ST2000DL001-9VT1
/sys/block/sde/device/model:ST31000520AS
root@fvdwsl-base:/ #


[fvdw]

I think he didn't swap a disk, only sda and sdb have partitions

But to be sure the suggestion of Jocko is good, can never be sure enough when formatting...

If thats ok, yes proceed to make 1 GPT partition on each of the three empty disks /dev/sdc /dev/sdd and /dev/sde and format them, just like you did for /dev/sdb

[Draftmancorp]

I've few done. I have a problem with my last 1TB disk for formatting:

Code: Select all

root@fvdwsl-base:/ # gdisk /dev/sde
GPT fdisk (gdisk) version 0.8.5

Partition table scan:
  MBR: MBR only
  BSD: not present
  APM: not present
  GPT: not present


***************************************************************
Found invalid GPT and valid MBR; converting MBR to GPT format.
THIS OPERATION IS POTENTIALLY DESTRUCTIVE! Exit by typing 'q' if
you don't want to convert your MBR partitions to GPT format!
***************************************************************


Command (? for help):


Usually now, I had to pur 2 for gpt partition , and d for deleting partition....but it is different. What I have to do?

[fvdw]

use in gdisk command "o" te create a new GPT partiion table and then proceed with creating one partition

[Draftmancorp]

This procedure delete all partition and create a new protective MBR continue?

[fvdw]

yes I assume you are working now on /dev/sde

[Draftmancorp]

Yes.now i,ll finish the procedure. I'm coming.

[Draftmancorp]

FINISHHHHHH :woohoo