plugout.net

by **Draftmancorp** » Tue May 14, 2013 9:16 pm

:scratch this seems a big job.

by **Draftmancorp** » Tue May 14, 2013 9:18 pm

Jocko wrote:Yes can manually start it by this command
Code: Select all
/usr/bin/fanctld -l 45 -u 50 /dev/sda /dev/sdb

every time that the nas starting? or it save the config command?

by **Draftmancorp** » Tue May 14, 2013 9:20 pm

Done :)

by **Jocko** » Tue May 14, 2013 9:23 pm

and the ps output :tapfoot

if it runs just we must only add a line in the boot script...

if not use this command

Code: Select all: /usr/bin/fanctld -l 45 -u 50 -d on /dev/sda /dev/sdb

(note "-d on")

and post the output

by **Draftmancorp** » Tue May 14, 2013 9:27 pm

the first command don't give an Output. se second yes:

Code: Select all: login as: root root@192.168.1.189's password: root@fvdwsl-base:/ # /usr/bin/fanctld -l 45 -u 50 /dev/sda /dev/sdb root@fvdwsl-base:/ # root@fvdwsl-base:/ # /usr/bin/fanctld -l 45 -u 50 -d on /dev/sda /dev/sdb fanctld: get_uboot_thresholds(): buf=console=ttyS0,115200 root=/dev/sda7 ro reset=0 productType=BIG5_KW cap=gpt,lba64 fanctld: get_uboot_thresholds(): failed ! FANCTLD: check_disk Fri Jul 20 17:34:05 2012 FANCTLD: getting disk status for device on FANCTLD: unable to open device on FANCTLD: getting disk status for device /dev/sda FANCTLD: turning fan onFANCTLD: SCSI_IOCTL_SEND_COMMAND, returned nonzero FANCTLD: exiting after signal 15root@fvdwsl-base:/ #

by **Jocko** » Tue May 14, 2013 9:28 pm

:whistle and the output of the command "ps axf"

by **Draftmancorp** » Tue May 14, 2013 9:30 pm

oh, that code:

Code: Select all: login as: root root@192.168.1.189's password: root@fvdwsl-base:/ # ps axf PID TTY STAT TIME COMMAND 2 ? S 0:00 [kthreadd] 3 ? S 0:00 \_ [ksoftirqd/0] 4 ? S 0:00 \_ [kworker/0:0] 5 ? S 0:00 \_ [kworker/u:0] 6 ? S< 0:00 \_ [khelper] 7 ? S 0:00 \_ [kworker/u:1] 194 ? S 0:00 \_ [sync_supers] 196 ? S 0:00 \_ [bdi-default] 197 ? S< 0:00 \_ [kblockd] 202 ? S< 0:00 \_ [ata_sff] 213 ? S 0:00 \_ [khubd] 220 ? S< 0:00 \_ [md] 240 ? S< 0:00 \_ [rpciod] 242 ? S 0:00 \_ [kworker/0:1] 248 ? S 0:00 \_ [kswapd0] 296 ? S 0:00 \_ [fsnotify_mark] 310 ? S< 0:00 \_ [unionfs_siod] 311 ? S< 0:00 \_ [nfsiod] 326 ? S 0:00 \_ [jfsIO] 327 ? S 0:00 \_ [jfsCommit] 328 ? S 0:00 \_ [jfsSync] 336 ? S< 0:00 \_ [xfs_mru_cache] 337 ? S< 0:00 \_ [xfslogd] 338 ? S< 0:00 \_ [xfsdatad] 339 ? S< 0:00 \_ [xfsconvertd] 340 ? S< 0:00 \_ [crypto] 419 ? S 0:00 \_ [scsi_eh_0] 422 ? S 0:00 \_ [scsi_eh_1] 425 ? S 0:00 \_ [kworker/u:2] 426 ? S 0:00 \_ [kworker/u:3] 432 ? S< 0:00 \_ [smflush] 438 ? S< 0:00 \_ [orion_spi] 443 ? S 0:00 \_ [mtdblock0] 448 ? S 0:00 \_ [mtdblock1] 519 ? S 0:00 \_ [mv_crypto] 571 ? S 0:00 \_ [kworker/u:4] 576 ? S 0:00 \_ [kworker/u:5] 623 ? S 0:00 \_ [kjournald] 648 ? S 0:00 \_ [kjournald] 696 ? S< 0:00 \_ [iscsi_eh] 798 ? S 0:00 \_ [flush-8:16] 814 ? S 0:00 \_ [kjournald] 817 ? S 0:00 \_ [kjournald] 818 ? S 0:00 \_ [flush-8:0] 1 ? Ss 0:00 init 636 ? Ss 0:00 /usr/sbin/buttons-nwsp2 807 ? Ss 0:00 /usr/sbin/noflushd -n 5 /dev/sda 849 ? Ss 0:00 /sbin/udhcpc -b -i eth0 -s /etc/api/api_dhcpc.php dhc 858 ? S<s 0:00 /sbin/udevd 867 ? Ss 0:01 /usr/bin/httpd -f httpd.conf -d /etc 874 ? S 0:00 \_ /usr/bin/httpd -f httpd.conf -d /etc 881 ? Ss 0:00 /usr/sbin/nmbd -D -l /var/log/samba 884 ? Ss 0:00 /usr/sbin/smbd -D -l /var/log/samba 891 ? S 0:00 \_ /usr/sbin/smbd -D -l /var/log/samba 894 ? S<s 0:00 /usr/sbin/syncawayd -n 3 896 ? Ss 0:00 /usr/sbin/portmap 908 ? Ss 0:00 dropbear -p 22 -r /rw_fs/etc/dropbear/dropbear_rsa_ho 957 ? Ss 0:00 \_ dropbear -p 22 -r /rw_fs/etc/dropbear/dropbear_rs 973 ttyp0 Ss+ 0:00 | \_ -sh 1001 ? Ss 0:00 \_ dropbear -p 22 -r /rw_fs/etc/dropbear/dropbear_rs 1002 ttyp1 Ss 0:00 \_ -sh 1010 ttyp1 R+ 0:00 \_ ps axf 922 ? Ss 0:00 /usr/sbin/hostd 7200 967 ? Ss 0:00 /bin/sh root@fvdwsl-base:/ #

by **Draftmancorp** » Tue May 14, 2013 9:31 pm

was it did all in sequence maybe??....

by **Jocko** » Tue May 14, 2013 9:34 pm

so it seems the daemon fails to start (do you have close the putty window after running the fan and open again the putty window to make the ps output ?)

by **Draftmancorp** » Tue May 14, 2013 9:39 pm

yes because i hadn't understand the right sequence. And for reply over internet i've do disable the lan, so the putty gone offline every time :) here the 2 actions with output:

Code: Select all: login as: root root@192.168.1.189's password: root@fvdwsl-base:/ # /usr/bin/fanctld -l 45 -u 50 /dev/sda /dev/sdb root@fvdwsl-base:/ # ps axf PID TTY STAT TIME COMMAND 2 ? S 0:00 [kthreadd] 3 ? S 0:00 \_ [ksoftirqd/0] 6 ? S< 0:00 \_ [khelper] 7 ? S 0:00 \_ [kworker/u:1] 194 ? S 0:00 \_ [sync_supers] 196 ? S 0:00 \_ [bdi-default] 197 ? S< 0:00 \_ [kblockd] 202 ? S< 0:00 \_ [ata_sff] 213 ? S 0:00 \_ [khubd] 220 ? S< 0:00 \_ [md] 240 ? S< 0:00 \_ [rpciod] 242 ? S 0:00 \_ [kworker/0:1] 248 ? S 0:00 \_ [kswapd0] 296 ? S 0:00 \_ [fsnotify_mark] 310 ? S< 0:00 \_ [unionfs_siod] 311 ? S< 0:00 \_ [nfsiod] 326 ? S 0:00 \_ [jfsIO] 327 ? S 0:00 \_ [jfsCommit] 328 ? S 0:00 \_ [jfsSync] 336 ? S< 0:00 \_ [xfs_mru_cache] 337 ? S< 0:00 \_ [xfslogd] 338 ? S< 0:00 \_ [xfsdatad] 339 ? S< 0:00 \_ [xfsconvertd] 340 ? S< 0:00 \_ [crypto] 419 ? S 0:00 \_ [scsi_eh_0] 422 ? S 0:00 \_ [scsi_eh_1] 426 ? S 0:00 \_ [kworker/u:3] 432 ? S< 0:00 \_ [smflush] 438 ? S< 0:00 \_ [orion_spi] 443 ? S 0:00 \_ [mtdblock0] 448 ? S 0:00 \_ [mtdblock1] 519 ? S 0:00 \_ [mv_crypto] 623 ? S 0:00 \_ [kjournald] 648 ? S 0:00 \_ [kjournald] 696 ? S< 0:00 \_ [iscsi_eh] 814 ? S 0:00 \_ [kjournald] 817 ? S 0:00 \_ [kjournald] 1014 ? S 0:00 \_ [kworker/0:2] 1015 ? S 0:00 \_ [flush-8:16] 1016 ? S 0:00 \_ [flush-8:0] 1 ? Ss 0:00 init 636 ? Ss 0:00 /usr/sbin/buttons-nwsp2 807 ? Ss 0:00 /usr/sbin/noflushd -n 5 /dev/sda 849 ? Ss 0:00 /sbin/udhcpc -b -i eth0 -s /etc/api/api_dhcpc.php dhcpdCbS 858 ? S<s 0:00 /sbin/udevd 867 ? Ss 0:01 /usr/bin/httpd -f httpd.conf -d /etc 874 ? S 0:00 \_ /usr/bin/httpd -f httpd.conf -d /etc 881 ? Ss 0:00 /usr/sbin/nmbd -D -l /var/log/samba 884 ? Ss 0:00 /usr/sbin/smbd -D -l /var/log/samba 891 ? S 0:00 \_ /usr/sbin/smbd -D -l /var/log/samba 894 ? S<s 0:00 /usr/sbin/syncawayd -n 3 896 ? Ss 0:00 /usr/sbin/portmap 908 ? Ss 0:00 dropbear -p 22 -r /rw_fs/etc/dropbear/dropbear_rsa_host_ke 957 ? Ss 0:00 \_ dropbear -p 22 -r /rw_fs/etc/dropbear/dropbear_rsa_hos 973 ttyp0 Ss+ 0:00 | \_ -sh 1001 ? Ss 0:00 \_ dropbear -p 22 -r /rw_fs/etc/dropbear/dropbear_rsa_hos 1002 ttyp1 Ss+ 0:00 | \_ -sh 1017 ? Ss 0:00 \_ dropbear -p 22 -r /rw_fs/etc/dropbear/dropbear_rsa_hos 1018 ttyp2 Ss 0:00 \_ -sh 1035 ttyp2 R+ 0:00 \_ ps axf 922 ? Ss 0:00 /usr/sbin/hostd 7200 967 ? Ss 0:00 /bin/sh root@fvdwsl-base:/ #

Code: Select all: root@fvdwsl-base:/ # /usr/bin/fanctld -l 45 -u 50 -d on /dev/sda /dev/sdb fanctld: get_uboot_thresholds(): buf=console=ttyS0,115200 root=/dev/sda7 ro reset=0 productType=BIG5_KW cap=gpt,lba64 fanctld: get_uboot_thresholds(): failed ! FANCTLD: check_disk Fri Jul 20 17:44:50 2012 FANCTLD: getting disk status for device on FANCTLD: unable to open device on FANCTLD: getting disk status for device /dev/sda FANCTLD: turning fan onFANCTLD: SCSI_IOCTL_SEND_COMMAND, returned nonzero FANCTLD: exiting after signal 15root@fvdwsl-base:/ # ps axf PID TTY STAT TIME COMMAND 2 ? S 0:00 [kthreadd] 3 ? S 0:00 \_ [ksoftirqd/0] 6 ? S< 0:00 \_ [khelper] 7 ? S 0:00 \_ [kworker/u:1] 194 ? S 0:00 \_ [sync_supers] 196 ? S 0:00 \_ [bdi-default] 197 ? S< 0:00 \_ [kblockd] 202 ? S< 0:00 \_ [ata_sff] 213 ? S 0:00 \_ [khubd] 220 ? S< 0:00 \_ [md] 240 ? S< 0:00 \_ [rpciod] 242 ? S 0:00 \_ [kworker/0:1] 248 ? S 0:00 \_ [kswapd0] 296 ? S 0:00 \_ [fsnotify_mark] 310 ? S< 0:00 \_ [unionfs_siod] 311 ? S< 0:00 \_ [nfsiod] 326 ? S 0:00 \_ [jfsIO] 327 ? S 0:00 \_ [jfsCommit] 328 ? S 0:00 \_ [jfsSync] 336 ? S< 0:00 \_ [xfs_mru_cache] 337 ? S< 0:00 \_ [xfslogd] 338 ? S< 0:00 \_ [xfsdatad] 339 ? S< 0:00 \_ [xfsconvertd] 340 ? S< 0:00 \_ [crypto] 419 ? S 0:00 \_ [scsi_eh_0] 422 ? S 0:00 \_ [scsi_eh_1] 426 ? S 0:00 \_ [kworker/u:3] 432 ? S< 0:00 \_ [smflush] 438 ? S< 0:00 \_ [orion_spi] 443 ? S 0:00 \_ [mtdblock0] 448 ? S 0:00 \_ [mtdblock1] 519 ? S 0:00 \_ [mv_crypto] 623 ? S 0:00 \_ [kjournald] 648 ? S 0:00 \_ [kjournald] 696 ? S< 0:00 \_ [iscsi_eh] 814 ? S 0:00 \_ [kjournald] 817 ? S 0:00 \_ [kjournald] 1014 ? S 0:00 \_ [kworker/0:2] 1015 ? S 0:00 \_ [flush-8:16] 1016 ? S 0:00 \_ [flush-8:0] 1 ? Ss 0:00 init 636 ? Ss 0:00 /usr/sbin/buttons-nwsp2 807 ? Ss 0:00 /usr/sbin/noflushd -n 5 /dev/sda 849 ? Ss 0:00 /sbin/udhcpc -b -i eth0 -s /etc/api/api_dhcpc.php dhcpdCbS 858 ? S<s 0:00 /sbin/udevd 867 ? Ss 0:01 /usr/bin/httpd -f httpd.conf -d /etc 874 ? S 0:00 \_ /usr/bin/httpd -f httpd.conf -d /etc 881 ? Ss 0:00 /usr/sbin/nmbd -D -l /var/log/samba 884 ? Ss 0:00 /usr/sbin/smbd -D -l /var/log/samba 891 ? S 0:00 \_ /usr/sbin/smbd -D -l /var/log/samba 894 ? S<s 0:00 /usr/sbin/syncawayd -n 3 896 ? Ss 0:00 /usr/sbin/portmap 908 ? Ss 0:00 dropbear -p 22 -r /rw_fs/etc/dropbear/dropbear_rsa_host_ke 957 ? Ss 0:00 \_ dropbear -p 22 -r /rw_fs/etc/dropbear/dropbear_rsa_hos 973 ttyp0 Ss+ 0:00 | \_ -sh 1001 ? Ss 0:00 \_ dropbear -p 22 -r /rw_fs/etc/dropbear/dropbear_rsa_hos 1002 ttyp1 Ss+ 0:00 | \_ -sh 1017 ? Ss 0:00 \_ dropbear -p 22 -r /rw_fs/etc/dropbear/dropbear_rsa_hos 1018 ttyp2 Ss 0:00 \_ -sh 1068 ttyp2 R+ 0:00 \_ ps axf 922 ? Ss 0:00 /usr/sbin/hostd 7200 967 ? Ss 0:00 /bin/sh root@fvdwsl-base:/ #

plugout.net

Lacie 5bign_v2 support

Re: Lacie 5bign_v2 support

Re: Lacie 5bign_v2 support

Re: Lacie 5bign_v2 support

Re: Lacie 5bign_v2 support

Re: Lacie 5bign_v2 support

Re: Lacie 5bign_v2 support

Re: Lacie 5bign_v2 support

Re: Lacie 5bign_v2 support

Re: Lacie 5bign_v2 support

Re: Lacie 5bign_v2 support

Who is online