Fail to get an IP from DHCP server after installing fvdw-sl

[fvdw]

seems a problem with file system

what does command

Code: Select all

dmesg

tells us ?

[fvdw]

are you familiar with program winScp ?

[Draftmancorp]

seems a problem with file system
what does command

Code: Select all

dmesg

tells us ?

Code: Select all

root@kirkwood-4:/usr/bin # dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.6.6 (root@fvdwsl-5big2.local) (gcc version 4.9.3 (GCC) ) #7 PREEMPT Sun May 7 11:50:52 CEST 2017
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005317f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: LaCie 5Big Network v2
[    0.000000] Ignoring unrecognised tag 0x41000403
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c0962e18, node_mem_map dfbfa000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro reset=0 productType=BIG5_KW
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 509736K/524288K available (7113K kernel code, 328K rwdata, 1940K rodata, 200K init, 395K bss, 14552K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08df8e8   (9055 kB)
[    0.000000]       .init : 0xc08e0000 - 0xc0912000   ( 200 kB)
[    0.000000]       .data : 0xc0912000 - 0xc0964320   ( 329 kB)
[    0.000000]        .bss : 0xc0964320 - 0xc09c7004   ( 396 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:114
[    0.000000] Switching to timer-based delay loop, resolution 6ns
[    0.000009] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
[    7.217903] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
[    7.218186] Console: colour dummy device 80x30
[    7.218215] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666)
[    7.218235] pid_max: default: 32768 minimum: 301
[    7.218380] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    7.218401] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    7.218989] CPU: Testing write buffer coherency: ok
[    7.219352] Setting up static identity map for 0x81e0 - 0x8238
[    7.222498] VFP support v0.3: not present
[    7.222843] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    7.222987] xor: measuring software checksum speed
[    7.318254]    arm4regs  :  1088.400 MB/sec
[    7.417979]    8regs     :   653.600 MB/sec
[    7.517978]    32regs    :   904.800 MB/sec
[    7.517996] xor: using function: arm4regs (1088.400 MB/sec)
[    7.518034] pinctrl core: initialized pinctrl subsystem
[    7.518916] NET: Registered protocol family 16
[    7.519406] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    7.522174] Kirkwood: MV88F6281-A0, TCLK=166666667.
[    7.522206] Feroceon L2: Enabling L2
[    7.522244] Feroceon L2: Cache support initialised.
[    7.523343] kirkwood_init: create proc tsinfo proc
[    7.523365] tsinfo: create proc tsinfo vendor successfully
[    7.523373] mv_usb_init 1
[    7.523384] mv_usb_init 2 devnum = 0
[    7.523394] init function mv_usb_init finished
[    7.523403] initial MPP regs: 01112222 00003311 33331100 33003333 00000033 00000000 00000000
[    7.523437]   final MPP regs: 01112222 00003311 33331100 33003333 00000033 00000000 00000000
[    7.524137]  orion-ehci registered
[    7.525998] orion_gpio_is_valid: invalid GPIO 7
[    7.738567] raid6: int32x1  gen()   101 MB/s
[    7.908283] raid6: int32x1  xor()    63 MB/s
[    8.078304] raid6: int32x2  gen()   133 MB/s
[    8.248033] raid6: int32x2  xor()    84 MB/s
[    8.418283] raid6: int32x4  gen()   133 MB/s
[    8.588162] raid6: int32x4  xor()    90 MB/s
[    8.758045] raid6: int32x8  gen()   121 MB/s
[    8.928048] raid6: int32x8  xor()    80 MB/s
[    8.928058] raid6: using algorithm int32x2 gen() 133 MB/s
[    8.928065] raid6: .... xor() 84 MB/s, rmw enabled
[    8.928073] raid6: using intx1 recovery algorithm
[    8.928375] vgaarb: loaded
[    8.928846] SCSI subsystem initialized
[    8.929135] libata version 3.00 loaded.
[    8.929688] usbcore: registered new interface driver usbfs
[    8.929825] usbcore: registered new interface driver hub
[    8.929941] usbcore: registered new device driver usb
[    8.930229] Linux video capture interface: v2.00
[    8.933617] clocksource: Switched to clocksource orion_clocksource
[    8.933782] VFS: Disk quotas dquot_6.6.0
[    8.933837] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    8.950067] NET: Registered protocol family 2
[    8.950739] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    8.950800] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    8.950852] TCP: Hash tables configured (established 4096 bind 4096)
[    8.950915] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    8.950939] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    8.951122] NET: Registered protocol family 1
[    8.951867] RPC: Registered named UNIX socket transport module.
[    8.951880] RPC: Registered udp transport module.
[    8.951887] RPC: Registered tcp transport module.
[    8.951895] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.951917] PCI: CLS 0 bytes, default 32
[    8.952151] NetWinder Floating Point Emulator V0.97 (double precision)
[    8.952286] gpio-usb-probe-4b err=0
[    8.952301] gpio-usb gpio-usb: USB GPIO's initialized
[    8.953546] futex hash table entries: 256 (order: -1, 3072 bytes)
[    8.954102] workingset: timestamp_bits=29 max_order=17 bucket_order=0
[    8.954968] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    8.955340] ntfs: driver 2.1.32 [Flags: R/W].
[    8.955397] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    8.955581] fuse init (API version 7.24)
[    8.955933] JFS: nTxBlock = 3982, nTxLock = 31858
[    8.957536] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    8.962289] async_tx: api initialized (async)
[    8.962388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    8.962407] io scheduler noop registered
[    8.962422] io scheduler deadline registered
[    8.962453] io scheduler cfq registered (default)
[    8.962675] mv_xor mv_xor.0: Marvell shared XOR driver
[    8.998652] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy )
[    9.000494] mv_xor mv_xor.1: Marvell shared XOR driver
[    9.038620] mv_xor mv_xor.1: Marvell XOR (Registers Mode): ( xor cpy )
[    9.046801] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    9.048396] console [ttyS0] disabled
[    9.068574] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[    9.667967] console [ttyS0] enabled
[    9.686207] brd: module loaded
[    9.696844] loop: module loaded
[    9.701067] sata_mv sata_mv.0: version 1.28
[    9.701133] sata_mv sata_mv.0: cannot get optional clkdev
[    9.706609] sata_mv sata_mv.0: slots 32 ports 2
[    9.715081] scsi host0: sata_mv
[    9.718962] scsi host1: sata_mv
[    9.722496] ata1: SATA max UDMA/133 irq 21
[    9.726580] ata2: SATA max UDMA/133 irq 21
[    9.732516] m25p80 spi0.0: mx25l4005a (512 Kbytes)
[    9.738286] Creating 2 MTD partitions on "spi_flash":
[    9.743319] 0x000000000000-0x00000007d000 : "u-boot"
[    9.749604] 0x00000007e000-0x00000007f000 : "u-boot-env"
[    9.757492] tun: Universal TUN/TAP device driver, 1.6
[    9.763375] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    9.769809] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    9.778256] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[    9.794628] libphy: orion_mdio_bus: probed
[    9.798926] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   10.217962] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   10.237959] ata1.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f
[   10.263816] ata1.00: hard resetting link
[   10.608744] ata1.01: hard resetting link
[   10.911321] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:8d:9a:81
[   10.948780] ata1.02: hard resetting link
[   11.278741] ata1.03: hard resetting link
[   11.797998] ata1.03: ATA-9: ST2000DM006-2DM164, CC26, max UDMA/133
[   11.804155] ata1.03: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   11.858004] ata1.03: configured for UDMA/133
[   11.868046] ata1: EH complete
[   11.898199] scsi 0:3:0:0: Direct-Access     ATA      ST2000DM006-2DM1 CC26 PQ: 0 ANSI: 5
[   11.958369] fvdw1 disk index before get_sd_name = 0
[   11.963223] device-name= sata_mv
[   11.966437] fvdw2 disk index after get_sd_name = 0
[   11.987965] fvdw3 prefix[0]=s  prefix[1]=d
[   11.992045] fvdw4 diskname = sda
[   11.998102] sd 0:3:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[   12.005813] sd 0:3:0:0: [sda] 4096-byte physical blocks
[   12.028211] sd 0:3:0:0: [sda] Write Protect is off
[   12.032990] sd 0:3:0:0: [sda] Mode Sense: 00 3a 00 00
[   12.033098] sd 0:3:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   12.080675] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:d0:4b:8d:39:dd
[   12.089718] PPP generic driver version 2.4.2
[   12.094329] PPP Deflate Compression module registered
[   12.099585] PPP MPPE Compression module registered
[   12.104366] NET: Registered protocol family 24
[   12.109116] usbcore: registered new interface driver rt2500usb
[   12.114970]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[   12.117574] sd 0:3:0:0: [sda] Attached SCSI disk
[   12.128711] usbcore: registered new interface driver rt73usb
[   12.134578] usbcore: registered new interface driver rt2800usb
[   12.140596] usbcore: registered new interface driver rtl8187
[   12.146474] usbcore: registered new interface driver rtl8192cu
[   12.152452] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[   12.160047] usbcore: registered new interface driver pegasus
[   12.165909] usbcore: registered new interface driver asix
[   12.171449] usbcore: registered new interface driver ax88179_178a
[   12.177716] usbcore: registered new interface driver cdc_ether
[   12.183684] usbcore: registered new interface driver net1080
[   12.189556] usbcore: registered new interface driver plusb
[   12.195216] usbcore: registered new interface driver cdc_subset
[   12.201271] usbcore: registered new interface driver zaurus
[   12.207050] usbcore: registered new interface driver ipheth
[   12.212780] usbcore: registered new interface driver cdc_ncm
[   12.219373] aoe: cannot create debugfs directory
[   12.224354] aoe: AoE v85 initialised.
[   12.497963] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   12.504896] ata2.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f
[   12.521863] ata2.00: hard resetting link
[   12.848709] ata2.01: hard resetting link
[   13.178708] ata2.02: hard resetting link
[   13.237952] rtc-mv rtc-mv: internal RTC not ticking
[   13.243101] i2c /dev entries driver
[   13.247845] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[   13.255068] uvcvideo: Unable to create debugfs directory
[   13.260628] usbcore: registered new interface driver uvcvideo
[   13.266349] USB Video Class driver (1.1.1)
[   13.270592] gspca_main: v2.14.0 registered
[   13.274814] usbcore: registered new interface driver Philips webcam
[   13.291568] md: linear personality registered for level -1
[   13.297041] md: raid0 personality registered for level 0
[   13.302598] md: raid1 personality registered for level 1
[   13.307892] md: raid10 personality registered for level 10
[   13.313649] md: raid6 personality registered for level 6
[   13.319032] md: raid5 personality registered for level 5
[   13.324316] md: raid4 personality registered for level 4
[   13.329924] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[   13.338659] device-mapper: multipath: version 1.11.0 loaded
[   13.344214] device-mapper: multipath round-robin: version 1.1.0 loaded
[   13.350765] device-mapper: multipath queue-length: version 0.2.0 loaded
[   13.357352] device-mapper: multipath service-time: version 0.3.0 loaded
[   13.364024] device-mapper: dm-log-userspace: version 1.3.0 loaded
[   13.370136] device-mapper: raid: Loading target version 1.7.0
[   13.379148] Netfilter messages via NETLINK v0.30.
[   13.383856] nfnl_acct: registering with nfnetlink.
[   13.389534] nf_conntrack version 0.5.0 (7964 buckets, 31856 max)
[   13.396219] ipip: IPv4 over IPv4 tunneling driver
[   13.402207] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.407719] NET: Registered protocol family 10
[   13.413703] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   13.419499] sit: IPv6 over IPv4 tunneling driver
[   13.424958] NET: Registered protocol family 17
[   13.429756] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   13.442487] Bridge firewalling registered
[   13.446626] NET: Registered protocol family 5
[   13.452324] console [netcon0] enabled
[   13.455973] netconsole: network logging started
[   13.461343] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   13.468533] hctosys: unable to open rtc device (rtc0)
[   13.508764] ata2.03: hard resetting link
[   13.838888] ata2: EH complete
[   13.857999] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[   13.866956] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem
[   13.895314] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   13.903018] VFS: Mounted root (ext3 filesystem) readonly on device 8:7.
[   13.910301] Freeing unused kernel memory: 200K (c08e0000 - c0912000)
[   13.916623] This architecture does not have kernel memory protection.
[   14.218074] EXT4-fs (sda7): re-mounted. Opts: (null)
[   14.596267] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[   14.838237] EXT4-fs (sda5): recovery complete
[   14.898024] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   14.939699] random: mkswap urandom read with 57 bits of entropy available
[   14.987885] Adding 514076k swap on /dev/sda3.  Priority:-1 extents:1 across:514076k
[   16.080238] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[   16.086237] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.125773] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[   19.135608] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   25.558011] random: nonblocking pool is initialized
root@kirkwood-4:/usr/bin #


are you familiar with progran winScp ?

Of course...no :mrgreen: (only html, css)

[fvdw]

well I suggest you install that program on your pc

https://winscp.net/eng/download.php

This will make further investigation much easier as you can then browse file system of the nas just like in file explorer of windows and copy easy from pc to nas

https://winscp.net/eng/docs/interfaces#commander_interface
You can log in using ssh server that we have running now using same credentials as you used in putty

I go to bed now, tommorow more ...fun ;)

:z)

[Draftmancorp]

well I suggest you install that program on your pc

https://winscp.net/eng/download.php

This will make further investigation much easier as you can then browse file system of the nas just like in file explorer of windows and copy easy from pc to nas

https://winscp.net/eng/docs/interfaces#commander_interface
You can log in using ssh server that we have running now using same credentials as you used in putty

I go to bed now, tommorow more ...fun ;)

:z)

OK, i prepare all and test one connection so I'll be ready for tomorrow.
:doh damn, tomorrow for launch since 10:30 to 16:00/16:30 I'll be to my family...
If you will be here after 16:00/16:30 i try to write here!

thanks so much for your help.

[fvdw]

I will be probably be available after 16 h

good night (we are making progress)

[Draftmancorp]

wow... with this software may can i copy the webserver folder from my old nas and paste it to new one???
Good night!!

[Draftmancorp]

I'm here.
Waiting for instruction :rock

[fvdw]

Hi draftmancorp, sorry to keep you waiting but still have visitors here.
But in between I can do some checks
Did you install winscp ?
If so connect to your nas by specyfying ip port and choose scp as protocol.
If you succeed in doing that you will see main directory of the nas in righthand side window,

Also connect with putty to ssh server and start webserver as we did yesterday. Open webrbrowser and try to acces webserver of the nas to generate the error as you had yestetday
Now in winscp browse in the nas window to folder /var/log and check if you see a folder with httpd log and click on the log file to see content, what error are mentioned?

[Draftmancorp]

Hi draftmancorp, sorry to keep you waiting but still have visitors here.
But in between I can do some checks
Did you install winscp ?
If so connect to your nas by specyfying ip port and choose scp as protocol.
If you succeed in doing that you will see main directory of the nas in righthand side window,

Also connect with putty to ssh server and start webserver as we did yesterday. Open webrbrowser and try to acces webserver of the nas to generate the error as you had yestetday
Now in winscp browse in the nas window to folder /var/log and check if you see a folder with httpd log and click on the log file to see content, what error are mentioned?

Ps.: Family first of all :hail
Yes, in httpd folder i have 3 log, see attachment.

Code: Select all

192.168.0.177 - - [01/Jan/1970:00:03:22 +0000] "GET / HTTP/1.1" 401 381
192.168.0.177 - admin-nas [01/Jan/1970:00:03:28 +0000] "GET / HTTP/1.1" 500 528
192.168.0.177 - admin-nas [01/Jan/1970:00:03:28 +0000] "GET /favicon.ico HTTP/1.1" 500 528


Code: Select all

è

Code: Select all

[Thu Jan 01 00:03:07.890677 1970] [auth_digest:notice] [pid 1015] AH01757: generating secret for digest authentication ...
[Thu Jan 01 00:03:08.271537 1970] [mpm_prefork:notice] [pid 1015] AH00163: Apache/2.4.7 (Unix) OpenSSL/1.0.1m PHP/5.6.6 configured -- resuming normal operations
[Thu Jan 01 00:03:08.271866 1970] [core:notice] [pid 1015] AH00094: Command line: '/usr/bin/httpd -f httpd.conf -d /etc'
[Thu Jan 01 00:03:28.847720 1970] [authn_file:error] [pid 1025] (2)No such file or directory: [client 192.168.0.177:63763] AH01620: Could not open password file: /var/run/.htpasswd
[Thu Jan 01 00:03:28.924967 1970] [authn_file:error] [pid 1019] (2)No such file or directory: [client 192.168.0.177:63765] AH01620: Could not open password file: /var/run/.htpasswd, referer: http://192.168.0.188/


Seems a problem with password recognize?