plugout.net

by **Jocko** » Mon Feb 04, 2019 7:20 pm

@fvdw
on this platform type the kernel is loaded at this address 0x2000000 instead of the usual address 0x8000000

by **fvdw** » Mon Feb 04, 2019 7:23 pm

Indeed you are right, :pound think I have to reread this topic
https://plugout.net/viewtopic.php?f=38&t=2875
There the answers are already given on the above questions. A quick check learned that the load external command needs modification as the current one in the console loads the kernel on a wrong position in RAM. I will do some rereading to refresh my memory and come back to you. Then we upload the external kernel manually using uboot console

by **m1m1sm1t1c0** » Mon Feb 04, 2019 7:26 pm

Remember that to install fvdw-sl firmware in this device is?

1
UIMAGE-466-SGARMADA370-STANDALONE-1

2
...
fvdw-sl-programs
...

When the installer has finished don't reboot, then

3
cd /
tftp -r UIMAGE-466-SGARMADA370-3 -l UIMAGE-466-SGARMADA370-3 -g 169.254.189.28
cd /
dd if=UIMAGE-466-SGARMADA370-3 of=/dev/sda6
sync

4
Poweroff the NAS

5
Start the u-boot console
Marvell>> setenv bootcmd 'disk 0x2000000 0:6 ; setenv bootargs console=ttyS0,115200 root=/dev/sda7 ; bootm 0x2000000;'
saveenv
Marvell>> reset

by **fvdw** » Mon Feb 04, 2019 7:45 pm

oke , failure is that the console loads the kernel at 0x800000 and overwrites uboot, indeed we should use 0x2000000 for this device

To load an extra kernel start uboot console at marvel prompt give command

Code: Select all: ide reset setenv bootargs console=ttyS0,115200 root=/dev/sda7 tftpboot 0x2000000 UIMAGE-466-ARMADA370-n bootm 0x2000000

(n= sequence number)
Of course tftp server of the console must be running
ps probably the command setenv is not required as you already have changed that command and saved it when installing the firmware, to check if it set correctly give command

Code: Select all: printenv bootargs

If it matches the above it is oke and no need to set again

If kernel fails we could try to use as bootargs

Code: Select all: setenv bootargs console=ttyS0,115200 netconsole=6666@${ipaddr}/,6666@${serverip}/ root=/dev/sda7 rw

This will enable netconsole and outputs kernel loading in the uboot console window if the kernel loading doesn't fail before netconsole is activated
PS do not enter an ip in {serverip} and {ipaddr} use the exact line as given

Now you should repeat for all kernels :whistle (sorry)

by **m1m1sm1t1c0** » Tue Feb 05, 2019 1:51 pm

Uf!!! I hope so much work was worth it.
I do not say it for anything bad, but with Kernel # 5 the led does not work.
The others kernels tried to determine why the NAS did not boot with # 5.
With the boot from the console all the kernels run the nas correctly.

printenv

Code: Select all: provided by fvdw waiting for u-boot.. starting u-boot net console click on window and press enter Marvell>> printenv printenv CASset=min MALLOC_len=5 Ubootver=5.0.0 autoload=no baudrate=115200 board_dtb=armada-370-n090103.dtb boot_fail=lump bootargs=console=ttyS0,115200 bootargs_end=:10.4.50.254:255.255.255.0:KW40:eth0:none bootargs_root=root=/dev/nfs rw bootcmd=disk 0x2000000 0:6 ; setenv bootargs console=ttyS0,115200 root=/dev/sda7 ; bootm 0x2000000; bootdelay=3 cacheShare=no console=console=ttyS0,115200 disL2Cache=yes disaMvPnp=no disk_expand=if test "$disk" = ide,0; then disk_iface=ide; disk_num=0; elif test "$disk" = ide,1; then disk_iface=ide; disk_num=1; else echo Invalid disk string: ${disk}; fi disk_list=ide,0 ide,1 dtb_addr=0x6000000 eeeEnable=no enaAutoRecovery=yes enaClockGating=no enaFPU=no enaWrAllo=no eth1addr=00:10:75:58:85:A6 eth1mtu=1500 ethact=egiga1 ethaddr=00:10:75:58:85:A6 ethmtu=1500 ethprime=egiga0 fdt_high=0xffffffff fdtaddr=0x1000000 fdtfile=armada_xp_db.dtb gatewayip=192.168.0.1 image_name=uImage initrd_name=uInitrd ipaddr=192.168.221.6 kern_addr=0x2000000 loadaddr=0x02000000 loads_echo=0 mvNetConfig=mv_net_config=1,(00:50:43:11:11:11,0:1:2:3:4),mtu=1500 mv_pon_addr=00:50:43:ea:32:12 ncip=192.168.221.8 netbsd_en=no netmask=255.255.255.0 netretry=no nexus_boot=test -n ${resetFlag_env} && forced=${resetFlag_env}; for disk in ${disk_list}; do run disk_expand; echo Booting Nexus OS from disk ${disk}...; countfail=0; bootfail=0; user=0; if run nexus_load_flags; then run nexus_rescue_countfail && countfail=1; run nexus_set_root; kern_img=/boot/uImage; dtb_img=/boot/target.dtb; test -n $board_dtb && dtb_img=/boot/$board_dtb; run nexus_load_image || bootfail=1; run nexus_rescue_user && user=1; if run nexus_can_boot; then run nexus_inc_count; run nexus_save_flags; run nexus_bootargs; bootm ${kern_addr} - ${dtb_addr}; bootfail=1; fi; run nexus_boot_rescue; fi; done; bootfail=1; countfail=; user=;run nexus_panic nexus_boot_part=2 nexus_boot_rescue=echo Booting Nexus rescue system from disk ${disk}...; root_part=2; kern_img=/rescue/uImage; dtb_img=/rescue/target.dtb; test -n $board_dtb && dtb_img=/rescue/$board_dtb; if run nexus_load_image; then if test -n ${panic}; then run nexus_uuid; setenv bootargs ${bootargs} root=UUID=${root_uuid}; else run nexus_bootargs; fi; run nexus_rescue_bootargs; bootm ${kern_addr} - ${dtb_addr}; fi nexus_bootargs=run nexus_uuid; setenv bootargs ${console} boot=UUID=${boot_uuid} root=UUID=${root_uuid} nexus_can_boot=test ${bootfail} -eq 0 -a ${countfail} -eq 0 -a ${forced} -eq 0 -a ${user} -eq 0 nexus_inc_count=if test ${boot_count} -eq 0; then setenv boot_count 1; elif test ${boot_count} -eq 1; then setenv boot_count 2; else setenv boot_count ${nexus_max_count}; fi nexus_load_flags=ext2get ${disk_iface} ${disk_num}:${nexus_nv_part} /ubootenv boot_count saved_entry nexus_load_image=ext2load ${disk_iface} ${disk_num}:${root_part} ${dtb_addr} ${dtb_img}; ext2load ${disk_iface} ${disk_num}:${root_part} ${kern_addr} ${kern_img} && iminfo ${kern_addr} nexus_max_count=3 nexus_nv_part=3 nexus_panic=panic=1; for disk in ${disk_list}; do run disk_expand; run nexus_boot_rescue; done nexus_rescue_bootargs=test -n ${bootfail} && setenv bootargs bootfail=${bootfail} ${bootargs}; test -n ${countfail} && setenv bootargs countfail=${countfail} ${bootargs}; test -n ${user} && setenv bootargs user=${user} ${bootargs}; test -n ${forced} && setenv bootargs forced=${forced} ${bootargs} nexus_rescue_countfail=test ${boot_count} -ge ${nexus_max_count} nexus_rescue_user=ext2get ${disk_iface} ${disk_num}:3 /ubootenv rescue && test ${rescue} -eq 1 nexus_save_flags=ext2set ${disk_iface} ${disk_num}:${nexus_nv_part} /ubootenv boot_count ${boot_count} nexus_set_root=if test $saved_entry -eq 1; then root_part=5; else root_part=4; fi nexus_uuid=ext2uuid ${disk_iface} ${disk_num}:${nexus_boot_part}; boot_uuid=${uuid}; ext2uuid ${disk_iface} ${disk_num}:${root_part}; root_uuid=${uuid} pcieTune=no pexMode=rc pre_lump=lump 1 product_serial=NZ323NNP pxe_files_load=:default.arm-armada370-db:default.arm-armadaxp:default.arm pxefile_addr_r=3100000 rcvrip=169.254.100.100 resetFlag_env=0 resetdisk=hdd start; ide reset; run usbstart rootpath=/srv/oneiric sata_delay_reset=0 sata_dma_mode=yes serverip=192.168.221.8 standalone=fsload 0x2000000 $image_name;setenv bootargs $console $mtdparts root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end; bootm 0x2000000; start_lump=lump 3 stderr=serial stdin=nc stdout=nc uboot_capabilities=gpt,lba64 usb0Mode=host usb1Mode=host usb2Mode=device usbActive=1 usbstart=gpio clear 59 vxworks_en=no yuk_ethaddr=00:00:00:EE:51:81 Environment size: 4702/65532 bytes Marvell>>

With this commands:

Code: Select all: ide reset setenv bootargs console=ttyS0,115200 root=/dev/sda7 tftpboot 0x2000000 UIMAGE-466-SGARMADA370-? bootm 0x2000000

tftpboot 0x2000000 UIMAGE-466-SGARMADA370-?
5, 6, 7, 7-2 and X

With 5 and 7-2 the led on one second, off one maybe two second.
With 6, 7 and X the led on and flashes with disk activity.

dmesg for 5

Code: Select all: login as: root root@192.168.221.6's password: root@nas-mimismo:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.6 (root@fvdwsl-5big2.local) (gcc version 4.9.3 (GCC) ) #5 Fri Feb 1 12:56:15 CET 2019 [ 0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Seagate Personal Cloud (Cumulus, SRN21C) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c0883a4c, node_mem_map dfb7a000 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 510024K/524288K available (6123K kernel code, 291K rwdata, 2040K rodata, 232K init, 416K bss, 14264K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0801084 (8165 kB) [ 0.000000] .init : 0xc0802000 - 0xc083c000 ( 232 kB) [ 0.000000] .data : 0xc083c000 - 0xc0884fe0 ( 292 kB) [ 0.000000] .bss : 0xc0884fe0 - 0xc08ed208 ( 417 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: DT/platform modifies aux control register: 0x12086302 -> 0x1a086302 [ 0.000000] Aurora cache controller enabled, 4 ways, 256 kB [ 0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302 [ 0.000000] Switching to timer-based delay loop, resolution 48ns [ 0.000007] sched_clock: 32 bits at 20MHz, resolution 48ns, wraps every 103356786663ns [ 0.000023] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 91987540234 ns [ 0.000293] Console: colour dummy device 80x30 [ 0.000311] Calibrating delay loop (skipped), value calculated using timer frequency.. 41.55 BogoMIPS (lpj=207773) [ 0.000324] pid_max: default: 32768 minimum: 301 [ 0.000451] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000461] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001052] CPU: Testing write buffer coherency: ok [ 0.001283] Setting up static identity map for 0x8200 - 0x8258 [ 0.001585] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1 [ 0.001716] mvebu-pmsu: Initializing Power Management Service Unit [ 0.005527] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 [ 0.005755] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.005864] xor: measuring software checksum speed [ 0.100057] arm4regs : 919.600 MB/sec [ 0.200056] 8regs : 772.400 MB/sec [ 0.300057] 32regs : 882.000 MB/sec [ 0.300064] xor: using function: arm4regs (919.600 MB/sec) [ 0.300087] pinctrl core: initialized pinctrl subsystem [ 0.300791] NET: Registered protocol family 16 [ 0.301261] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.301851] cpuidle: using governor ladder [ 0.305950] sram soc:sa-sram: found no memory resource [ 0.305972] sram: probe of soc:sa-sram failed with error -22 [ 0.306599] No ATAGs? [ 0.306614] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.306736] mvebu-pmsu: CPU idle is currently broken: disabling [ 0.480345] raid6: int32x1 gen() 142 MB/s [ 0.650194] raid6: int32x1 xor() 136 MB/s [ 0.820114] raid6: int32x2 gen() 213 MB/s [ 0.990084] raid6: int32x2 xor() 155 MB/s [ 1.160084] raid6: int32x4 gen() 179 MB/s [ 1.330092] raid6: int32x4 xor() 140 MB/s [ 1.500287] raid6: int32x8 gen() 175 MB/s [ 1.670123] raid6: int32x8 xor() 116 MB/s [ 1.670130] raid6: using algorithm int32x2 gen() 213 MB/s [ 1.670136] raid6: .... xor() 155 MB/s, rmw enabled [ 1.670142] raid6: using intx1 recovery algorithm [ 1.670704] SCSI subsystem initialized [ 1.670875] libata version 3.00 loaded. [ 1.672393] clocksource: Switched to clocksource armada_370_xp_clocksource [ 1.672691] FS-Cache: Loaded [ 1.678492] NET: Registered protocol family 2 [ 1.678997] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 1.679034] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 1.679072] TCP: Hash tables configured (established 4096 bind 4096) [ 1.679139] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 1.679154] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 1.679269] NET: Registered protocol family 1 [ 1.679535] RPC: Registered named UNIX socket transport module. [ 1.679544] RPC: Registered udp transport module. [ 1.679550] RPC: Registered tcp transport module. [ 1.679555] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.679575] PCI: CLS 0 bytes, default 64 [ 1.679826] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.680722] futex hash table entries: 256 (order: -1, 3072 bytes) [ 1.681306] workingset: timestamp_bits=13 max_order=17 bucket_order=4 [ 1.681675] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.681936] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.682302] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.682337] fuse init (API version 7.24) [ 1.682612] JFS: nTxBlock = 3984, nTxLock = 31876 [ 1.687954] async_tx: api initialized (async) [ 1.688044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.688056] io scheduler noop registered [ 1.688066] io scheduler deadline registered [ 1.688091] io scheduler cfq registered (default) [ 1.688688] armada-370-pinctrl f1018000.pin-ctrl: registered pinctrl driver [ 1.689464] irq: Cannot allocate irq_descs @ IRQ39, assuming pre-allocated [ 1.689850] irq: Cannot allocate irq_descs @ IRQ71, assuming pre-allocated [ 1.690123] irq: Cannot allocate irq_descs @ IRQ103, assuming pre-allocated [ 1.690801] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00 [ 1.690816] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 1.690827] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff] [ 1.690838] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.690867] pci 0000:00:01.0: [11ab:6710] type 01 class 0x060400 [ 1.691087] PCI: bus0: Fast back to back transfers disabled [ 1.691099] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.691248] pci 0000:01:00.0: [1b21:1142] type 00 class 0x0c0330 [ 1.691281] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x40007fff 64bit] [ 1.691388] pci 0000:01:00.0: PME# supported from D3hot [ 1.691593] PCI: bus1: Fast back to back transfers disabled [ 1.691606] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.691672] pci 0000:00:01.0: BAR 8: assigned [mem 0xf8000000-0xf80fffff] [ 1.691688] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf8007fff 64bit] [ 1.691705] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.691717] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff] [ 1.691757] pci 0000:00:01.0: enabling device (0140 -> 0142) [ 1.691958] mv_xor f1060800.xor: Marvell shared XOR driver [ 1.733144] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.734134] mv_xor f1060900.xor: Marvell shared XOR driver [ 1.773119] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.774275] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.775501] console [ttyS0] disabled [ 1.795627] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 20, base_baud = 12500000) is a 16550A [ 2.477757] console [ttyS0] enabled [ 2.491628] brd: module loaded [ 2.499856] loop: module loaded [ 2.503533] sata_mv f10a0000.sata: version 1.28 [ 2.503693] sata_mv f10a0000.sata: slots 32 ports 1 [ 2.509559] scsi host0: sata_mv [ 2.512986] ata1: SATA max UDMA/133 irq 28 [ 2.518609] m25p80 spi0.0: mx25l8005 (1024 Kbytes) [ 2.523466] 1 ofpart partitions found on MTD device spi0.0 [ 2.528977] Creating 1 MTD partitions on "spi0.0": [ 2.533806] 0x000000000000-0x000000100000 : "u-boot" [ 2.540423] libphy: Fixed MDIO Bus: probed [ 2.544575] tun: Universal TUN/TAP device driver, 1.6 [ 2.549649] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.555976] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.564058] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.573141] libphy: orion_mdio_bus: probed [ 2.579131] mvneta f1074000.ethernet eth0: Using hardware mac address 00:10:75:58:85:a6 [ 2.587296] PPP generic driver version 2.4.2 [ 2.591708] PPP Deflate Compression module registered [ 2.596815] PPP MPPE Compression module registered [ 2.601635] NET: Registered protocol family 24 [ 2.606521] aoe: cannot create debugfs directory [ 2.611300] aoe: AoE v85 initialised. [ 2.615378] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0 [ 2.633337] md: linear personality registered for level -1 [ 2.638858] md: raid0 personality registered for level 0 [ 2.644215] md: raid1 personality registered for level 1 [ 2.649557] md: raid10 personality registered for level 10 [ 2.655322] md: raid6 personality registered for level 6 [ 2.660661] md: raid5 personality registered for level 5 [ 2.666013] md: raid4 personality registered for level 4 [ 2.671498] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 2.680213] device-mapper: multipath: version 1.11.0 loaded [ 2.685838] device-mapper: multipath round-robin: version 1.1.0 loaded [ 2.692412] device-mapper: multipath queue-length: version 0.2.0 loaded [ 2.699063] device-mapper: multipath service-time: version 0.3.0 loaded [ 2.705767] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 2.711896] device-mapper: raid: Loading target version 1.7.0 [ 2.718151] leds-ns2l: probe of leds-ns2l failed with error -22 [ 2.724168] ledtrig-cpu: registered to indicate activity on CPUs [ 2.730460] marvell-cesa: probe of f1090000.crypto failed with error -22 [ 2.737335] hidraw: raw HID events driver (C) Jiri Kosina [ 2.743066] Netfilter messages via NETLINK v0.30. [ 2.747805] nfnl_acct: registering with nfnetlink. [ 2.752659] nf_conntrack version 0.5.0 (7969 buckets, 31876 max) [ 2.759336] ipip: IPv4 over IPv4 tunneling driver [ 2.764818] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.770342] NET: Registered protocol family 10 [ 2.775754] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.781345] sit: IPv6 over IPv4 tunneling driver [ 2.786602] NET: Registered protocol family 17 [ 2.791106] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.803812] Bridge firewalling registered [ 2.807845] NET: Registered protocol family 5 [ 2.812339] Key type dns_resolver registered [ 2.817114] registered taskstats version 1 [ 2.822184] console [netcon0] enabled [ 2.825892] netconsole: network logging started [ 2.830936] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.837892] rtc-mv f1010300.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.042477] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 3.053266] ata1.00: ATA-9: ST3000VN000-1HJ166, SC60, max UDMA/133 [ 3.059479] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.086870] ata1.00: configured for UDMA/133 [ 3.091535] scsi 0:0:0:0: Direct-Access ATA ST3000VN000-1HJ1 SC60 PQ: 0 ANSI: 5 [ 3.100668] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 3.108477] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.113958] sd 0:0:0:0: [sda] Write Protect is off [ 3.118780] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.118865] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.206662] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 3.213856] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.218552] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 3.253064] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem [ 3.261141] EXT4-fs (sda7): INFO: recovery required on readonly filesystem [ 3.268068] EXT4-fs (sda7): write access will be enabled during recovery [ 3.482858] EXT4-fs (sda7): recovery complete [ 3.522454] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 3.530187] VFS: Mounted root (ext3 filesystem) readonly on device 8:7. [ 3.537182] Freeing unused kernel memory: 232K (c0802000 - c083c000) [ 3.543575] This architecture does not have kernel memory protection. [ 3.892770] EXT4-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended [ 3.922465] EXT4-fs (sda7): re-mounted. Opts: (null) [ 4.706164] usbcore: registered new interface driver usbfs [ 4.711735] usbcore: registered new interface driver hub [ 4.717180] usbcore: registered new device driver usb [ 4.724200] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.731319] ehci-orion: EHCI orion driver [ 4.735552] orion-ehci f1050000.usb: EHCI Host Controller [ 4.741001] orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1 [ 4.748729] orion-ehci f1050000.usb: irq 26, io mem 0xf1050000 [ 4.772404] orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00 [ 4.778486] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.785323] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.792588] usb usb1: Product: EHCI Host Controller [ 4.797489] usb usb1: Manufacturer: Linux 4.6.6 ehci_hcd [ 4.802833] usb usb1: SerialNumber: f1050000.usb [ 4.807962] hub 1-0:1.0: USB hub found [ 4.811757] hub 1-0:1.0: 1 port detected [ 4.829054] usbcore: registered new interface driver usb-storage [ 4.846232] usbcore: registered new interface driver usblp [ 4.876918] Loading iSCSI transport class v2.0-870. [ 4.886267] iscsi: registered transport (tcp) [ 5.226436] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem [ 5.352687] EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended [ 5.382756] EXT4-fs (sda5): 2 orphan inodes deleted [ 5.387661] EXT4-fs (sda5): recovery complete [ 5.492457] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 5.565022] random: mkswap urandom read with 66 bits of entropy available [ 5.618795] Adding 524284k swap on /dev/sda3. Priority:-1 extents:1 across:524284k [ 17.659851] udevd (311): /proc/311/oom_adj is deprecated, please use /proc/311/oom_score_adj instead. [ 17.669225] udev: starting version 130 [ 18.043174] random: nonblocking pool is initialized [ 18.322953] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 18.328234] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 18.396134] xhci_hcd 0000:01:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010 [ 18.765257] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 18.772090] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.779375] usb usb2: Product: xHCI Host Controller [ 18.784286] usb usb2: Manufacturer: Linux 4.6.6 xhci-hcd [ 18.789623] usb usb2: SerialNumber: 0000:01:00.0 [ 18.795424] hub 2-0:1.0: USB hub found [ 18.799704] hub 2-0:1.0: 2 ports detected [ 18.804230] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 18.809505] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 18.817089] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 18.825327] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 18.832149] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.839417] usb usb3: Product: xHCI Host Controller [ 18.844326] usb usb3: Manufacturer: Linux 4.6.6 xhci-hcd [ 18.849664] usb usb3: SerialNumber: 0000:01:00.0 [ 18.855383] hub 3-0:1.0: USB hub found [ 18.859654] hub 3-0:1.0: 2 ports detected [ 26.140982] EXT4-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended [ 26.828143] EXT4-fs (sda8): recovery complete [ 26.854580] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr,acl,nodelalloc [ 28.152617] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 48.153149] mvneta f1074000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 48.161218] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

dmesg for 6

Code: Select all: login as: root root@192.168.221.6's password: root@nas-mimismo:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.6 (root@fvdwsl-5big2.local) (gcc version 4.9.3 (GCC) ) #6 Sat Feb 2 22:08:30 CET 2019 [ 0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Seagate Personal Cloud (Cumulus, SRN21C) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c0883a4c, node_mem_map dfb7a000 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 510028K/524288K available (6123K kernel code, 291K rwdata, 2040K rodata, 232K init, 416K bss, 14260K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0801084 (8165 kB) [ 0.000000] .init : 0xc0802000 - 0xc083c000 ( 232 kB) [ 0.000000] .data : 0xc083c000 - 0xc0884fe0 ( 292 kB) [ 0.000000] .bss : 0xc0884fe0 - 0xc08ed208 ( 417 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: DT/platform modifies aux control register: 0x12086302 -> 0x1a086302 [ 0.000000] Aurora cache controller enabled, 4 ways, 256 kB [ 0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302 [ 0.000000] Switching to timer-based delay loop, resolution 48ns [ 0.000007] sched_clock: 32 bits at 20MHz, resolution 48ns, wraps every 103356786663ns [ 0.000023] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 91987540234 ns [ 0.000295] Console: colour dummy device 80x30 [ 0.000312] Calibrating delay loop (skipped), value calculated using timer frequency.. 41.55 BogoMIPS (lpj=207773) [ 0.000325] pid_max: default: 32768 minimum: 301 [ 0.000452] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000462] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001050] CPU: Testing write buffer coherency: ok [ 0.001281] Setting up static identity map for 0x8200 - 0x8258 [ 0.001581] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1 [ 0.001712] mvebu-pmsu: Initializing Power Management Service Unit [ 0.005473] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 [ 0.005701] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.005811] xor: measuring software checksum speed [ 0.100056] arm4regs : 919.600 MB/sec [ 0.200055] 8regs : 772.400 MB/sec [ 0.300057] 32regs : 882.000 MB/sec [ 0.300064] xor: using function: arm4regs (919.600 MB/sec) [ 0.300087] pinctrl core: initialized pinctrl subsystem [ 0.300792] NET: Registered protocol family 16 [ 0.301265] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.301850] cpuidle: using governor ladder [ 0.305945] sram soc:sa-sram: found no memory resource [ 0.305967] sram: probe of soc:sa-sram failed with error -22 [ 0.306501] No ATAGs? [ 0.306517] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.306639] mvebu-pmsu: CPU idle is currently broken: disabling [ 0.480345] raid6: int32x1 gen() 142 MB/s [ 0.650193] raid6: int32x1 xor() 136 MB/s [ 0.820114] raid6: int32x2 gen() 213 MB/s [ 0.990084] raid6: int32x2 xor() 155 MB/s [ 1.160084] raid6: int32x4 gen() 179 MB/s [ 1.330093] raid6: int32x4 xor() 140 MB/s [ 1.500286] raid6: int32x8 gen() 175 MB/s [ 1.670123] raid6: int32x8 xor() 116 MB/s [ 1.670130] raid6: using algorithm int32x2 gen() 213 MB/s [ 1.670136] raid6: .... xor() 155 MB/s, rmw enabled [ 1.670142] raid6: using intx1 recovery algorithm [ 1.670699] SCSI subsystem initialized [ 1.670873] libata version 3.00 loaded. [ 1.672388] clocksource: Switched to clocksource armada_370_xp_clocksource [ 1.672686] FS-Cache: Loaded [ 1.678464] NET: Registered protocol family 2 [ 1.678964] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 1.679001] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 1.679038] TCP: Hash tables configured (established 4096 bind 4096) [ 1.679108] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 1.679122] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 1.679238] NET: Registered protocol family 1 [ 1.679504] RPC: Registered named UNIX socket transport module. [ 1.679513] RPC: Registered udp transport module. [ 1.679518] RPC: Registered tcp transport module. [ 1.679524] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.679543] PCI: CLS 0 bytes, default 64 [ 1.679794] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.680698] futex hash table entries: 256 (order: -1, 3072 bytes) [ 1.681289] workingset: timestamp_bits=13 max_order=17 bucket_order=4 [ 1.681645] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.681901] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.682272] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.682307] fuse init (API version 7.24) [ 1.682591] JFS: nTxBlock = 3984, nTxLock = 31876 [ 1.687936] async_tx: api initialized (async) [ 1.688025] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.688038] io scheduler noop registered [ 1.688048] io scheduler deadline registered [ 1.688072] io scheduler cfq registered (default) [ 1.688704] armada-370-pinctrl f1018000.pin-ctrl: registered pinctrl driver [ 1.689473] irq: Cannot allocate irq_descs @ IRQ39, assuming pre-allocated [ 1.689858] irq: Cannot allocate irq_descs @ IRQ71, assuming pre-allocated [ 1.690131] irq: Cannot allocate irq_descs @ IRQ103, assuming pre-allocated [ 1.690795] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00 [ 1.690811] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 1.690822] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff] [ 1.690833] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.690863] pci 0000:00:01.0: [11ab:6710] type 01 class 0x060400 [ 1.691085] PCI: bus0: Fast back to back transfers disabled [ 1.691097] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.691241] pci 0000:01:00.0: [1b21:1142] type 00 class 0x0c0330 [ 1.691274] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x40007fff 64bit] [ 1.691381] pci 0000:01:00.0: PME# supported from D3hot [ 1.691589] PCI: bus1: Fast back to back transfers disabled [ 1.691602] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.691669] pci 0000:00:01.0: BAR 8: assigned [mem 0xf8000000-0xf80fffff] [ 1.691685] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf8007fff 64bit] [ 1.691702] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.691715] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff] [ 1.691754] pci 0000:00:01.0: enabling device (0140 -> 0142) [ 1.691945] mv_xor f1060800.xor: Marvell shared XOR driver [ 1.733144] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.734146] mv_xor f1060900.xor: Marvell shared XOR driver [ 1.773118] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.774270] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.775473] console [ttyS0] disabled [ 1.795601] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 20, base_baud = 12500000) is a 16550A [ 2.477735] console [ttyS0] enabled [ 2.491584] brd: module loaded [ 2.499862] loop: module loaded [ 2.503532] sata_mv f10a0000.sata: version 1.28 [ 2.503689] sata_mv f10a0000.sata: slots 32 ports 1 [ 2.509558] scsi host0: sata_mv [ 2.512981] ata1: SATA max UDMA/133 irq 28 [ 2.518586] m25p80 spi0.0: mx25l8005 (1024 Kbytes) [ 2.523442] 1 ofpart partitions found on MTD device spi0.0 [ 2.528952] Creating 1 MTD partitions on "spi0.0": [ 2.533781] 0x000000000000-0x000000100000 : "u-boot" [ 2.540384] libphy: Fixed MDIO Bus: probed [ 2.544537] tun: Universal TUN/TAP device driver, 1.6 [ 2.549612] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.555940] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.564038] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.573119] libphy: orion_mdio_bus: probed [ 2.579167] mvneta f1074000.ethernet eth0: Using hardware mac address 00:10:75:58:85:a6 [ 2.587332] PPP generic driver version 2.4.2 [ 2.591749] PPP Deflate Compression module registered [ 2.596857] PPP MPPE Compression module registered [ 2.601677] NET: Registered protocol family 24 [ 2.606568] aoe: cannot create debugfs directory [ 2.611345] aoe: AoE v85 initialised. [ 2.615421] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0 [ 2.633371] md: linear personality registered for level -1 [ 2.638892] md: raid0 personality registered for level 0 [ 2.644249] md: raid1 personality registered for level 1 [ 2.649591] md: raid10 personality registered for level 10 [ 2.655350] md: raid6 personality registered for level 6 [ 2.660688] md: raid5 personality registered for level 5 [ 2.666039] md: raid4 personality registered for level 4 [ 2.671524] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 2.680233] device-mapper: multipath: version 1.11.0 loaded [ 2.685857] device-mapper: multipath round-robin: version 1.1.0 loaded [ 2.692430] device-mapper: multipath queue-length: version 0.2.0 loaded [ 2.699081] device-mapper: multipath service-time: version 0.3.0 loaded [ 2.705790] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 2.711919] device-mapper: raid: Loading target version 1.7.0 [ 2.718145] ledtrig-cpu: registered to indicate activity on CPUs [ 2.724452] marvell-cesa: probe of f1090000.crypto failed with error -22 [ 2.731303] hidraw: raw HID events driver (C) Jiri Kosina [ 2.737034] Netfilter messages via NETLINK v0.30. [ 2.741774] nfnl_acct: registering with nfnetlink. [ 2.746630] nf_conntrack version 0.5.0 (7969 buckets, 31876 max) [ 2.753316] ipip: IPv4 over IPv4 tunneling driver [ 2.758784] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.764334] NET: Registered protocol family 10 [ 2.769713] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.775325] sit: IPv6 over IPv4 tunneling driver [ 2.780558] NET: Registered protocol family 17 [ 2.785084] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.797778] Bridge firewalling registered [ 2.801810] NET: Registered protocol family 5 [ 2.806323] Key type dns_resolver registered [ 2.811072] registered taskstats version 1 [ 2.816170] console [netcon0] enabled [ 2.819852] netconsole: network logging started [ 2.824910] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.831844] rtc-mv f1010300.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.032410] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 3.043208] ata1.00: ATA-9: ST3000VN000-1HJ166, SC60, max UDMA/133 [ 3.049423] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.076866] ata1.00: configured for UDMA/133 [ 3.081519] scsi 0:0:0:0: Direct-Access ATA ST3000VN000-1HJ1 SC60 PQ: 0 ANSI: 5 [ 3.090636] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 3.098444] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.103929] sd 0:0:0:0: [sda] Write Protect is off [ 3.108749] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.108834] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.197436] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 3.204640] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.209338] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 3.243812] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem [ 3.251883] EXT4-fs (sda7): INFO: recovery required on readonly filesystem [ 3.258818] EXT4-fs (sda7): write access will be enabled during recovery [ 3.273980] EXT4-fs (sda7): recovery complete [ 3.292460] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 3.300189] VFS: Mounted root (ext3 filesystem) readonly on device 8:7. [ 3.307180] Freeing unused kernel memory: 232K (c0802000 - c083c000) [ 3.313571] This architecture does not have kernel memory protection. [ 3.723107] EXT4-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended [ 3.752462] EXT4-fs (sda7): re-mounted. Opts: (null) [ 4.606750] usbcore: registered new interface driver usbfs [ 4.612321] usbcore: registered new interface driver hub [ 4.617757] usbcore: registered new device driver usb [ 4.624765] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.631883] ehci-orion: EHCI orion driver [ 4.636113] orion-ehci f1050000.usb: EHCI Host Controller [ 4.641563] orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1 [ 4.649292] orion-ehci f1050000.usb: irq 26, io mem 0xf1050000 [ 4.672401] orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00 [ 4.678483] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.685320] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.692584] usb usb1: Product: EHCI Host Controller [ 4.697486] usb usb1: Manufacturer: Linux 4.6.6 ehci_hcd [ 4.702830] usb usb1: SerialNumber: f1050000.usb [ 4.707963] hub 1-0:1.0: USB hub found [ 4.711760] hub 1-0:1.0: 1 port detected [ 4.729017] usbcore: registered new interface driver usb-storage [ 4.746115] usbcore: registered new interface driver usblp [ 4.776877] Loading iSCSI transport class v2.0-870. [ 4.786206] iscsi: registered transport (tcp) [ 5.106932] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem [ 5.124231] EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended [ 5.152643] EXT4-fs (sda5): recovery complete [ 5.157029] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 5.285105] random: mkswap urandom read with 44 bits of entropy available [ 5.338883] Adding 524284k swap on /dev/sda3. Priority:-1 extents:1 across:524284k [ 17.427824] udevd (312): /proc/312/oom_adj is deprecated, please use /proc/312/oom_score_adj instead. [ 17.437197] udev: starting version 130 [ 18.158376] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 18.163704] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 18.231586] xhci_hcd 0000:01:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010 [ 18.575700] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 18.582562] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.589819] usb usb2: Product: xHCI Host Controller [ 18.594734] usb usb2: Manufacturer: Linux 4.6.6 xhci-hcd [ 18.600072] usb usb2: SerialNumber: 0000:01:00.0 [ 18.605924] hub 2-0:1.0: USB hub found [ 18.610208] hub 2-0:1.0: 2 ports detected [ 18.614734] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 18.619998] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 18.627543] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 18.635776] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 18.642608] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.649864] usb usb3: Product: xHCI Host Controller [ 18.654773] usb usb3: Manufacturer: Linux 4.6.6 xhci-hcd [ 18.660116] usb usb3: SerialNumber: 0000:01:00.0 [ 18.665872] hub 3-0:1.0: USB hub found [ 18.670145] hub 3-0:1.0: 2 ports detected [ 21.783107] random: nonblocking pool is initialized [ 25.982384] EXT4-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended [ 26.699235] EXT4-fs (sda8): recovery complete [ 26.724576] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr,acl,nodelalloc [ 28.022615] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.023156] mvneta f1074000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 31.031228] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

dmesg for 7

Code: Select all: login as: root root@192.168.221.6's password: root@nas-mimismo:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.6 (root@fvdwsl-5big2.local) (gcc version 4.9.3 (GCC) ) #6 Sat Feb 2 22:08:30 CET 2019 [ 0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Seagate Personal Cloud (Cumulus, SRN21C) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c0883a4c, node_mem_map dfb7a000 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 510028K/524288K available (6123K kernel code, 291K rwdata, 2040K rodata, 232K init, 416K bss, 14260K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0801084 (8165 kB) [ 0.000000] .init : 0xc0802000 - 0xc083c000 ( 232 kB) [ 0.000000] .data : 0xc083c000 - 0xc0884fe0 ( 292 kB) [ 0.000000] .bss : 0xc0884fe0 - 0xc08ed208 ( 417 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: DT/platform modifies aux control register: 0x12086302 -> 0x1a086302 [ 0.000000] Aurora cache controller enabled, 4 ways, 256 kB [ 0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302 [ 0.000000] Switching to timer-based delay loop, resolution 48ns [ 0.000007] sched_clock: 32 bits at 20MHz, resolution 48ns, wraps every 103356786663ns [ 0.000023] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 91987540234 ns [ 0.000294] Console: colour dummy device 80x30 [ 0.000311] Calibrating delay loop (skipped), value calculated using timer frequency.. 41.55 BogoMIPS (lpj=207773) [ 0.000324] pid_max: default: 32768 minimum: 301 [ 0.000450] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000460] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001049] CPU: Testing write buffer coherency: ok [ 0.001281] Setting up static identity map for 0x8200 - 0x8258 [ 0.001582] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1 [ 0.001712] mvebu-pmsu: Initializing Power Management Service Unit [ 0.005478] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 [ 0.005708] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.005817] xor: measuring software checksum speed [ 0.100056] arm4regs : 919.600 MB/sec [ 0.200055] 8regs : 772.400 MB/sec [ 0.300057] 32regs : 882.000 MB/sec [ 0.300064] xor: using function: arm4regs (919.600 MB/sec) [ 0.300086] pinctrl core: initialized pinctrl subsystem [ 0.300789] NET: Registered protocol family 16 [ 0.301260] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.301849] cpuidle: using governor ladder [ 0.305943] sram soc:sa-sram: found no memory resource [ 0.305964] sram: probe of soc:sa-sram failed with error -22 [ 0.306498] No ATAGs? [ 0.306513] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.306634] mvebu-pmsu: CPU idle is currently broken: disabling [ 0.480345] raid6: int32x1 gen() 142 MB/s [ 0.650194] raid6: int32x1 xor() 136 MB/s [ 0.820114] raid6: int32x2 gen() 213 MB/s [ 0.990084] raid6: int32x2 xor() 155 MB/s [ 1.160083] raid6: int32x4 gen() 179 MB/s [ 1.330091] raid6: int32x4 xor() 140 MB/s [ 1.500286] raid6: int32x8 gen() 175 MB/s [ 1.670123] raid6: int32x8 xor() 116 MB/s [ 1.670130] raid6: using algorithm int32x2 gen() 213 MB/s [ 1.670136] raid6: .... xor() 155 MB/s, rmw enabled [ 1.670141] raid6: using intx1 recovery algorithm [ 1.670699] SCSI subsystem initialized [ 1.670871] libata version 3.00 loaded. [ 1.672381] clocksource: Switched to clocksource armada_370_xp_clocksource [ 1.672681] FS-Cache: Loaded [ 1.678474] NET: Registered protocol family 2 [ 1.678977] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 1.679014] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 1.679051] TCP: Hash tables configured (established 4096 bind 4096) [ 1.679120] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 1.679135] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 1.679249] NET: Registered protocol family 1 [ 1.679514] RPC: Registered named UNIX socket transport module. [ 1.679523] RPC: Registered udp transport module. [ 1.679528] RPC: Registered tcp transport module. [ 1.679534] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.679553] PCI: CLS 0 bytes, default 64 [ 1.679802] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.680708] futex hash table entries: 256 (order: -1, 3072 bytes) [ 1.681301] workingset: timestamp_bits=13 max_order=17 bucket_order=4 [ 1.681661] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.681919] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.682291] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.682326] fuse init (API version 7.24) [ 1.682607] JFS: nTxBlock = 3984, nTxLock = 31876 [ 1.687959] async_tx: api initialized (async) [ 1.688049] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.688062] io scheduler noop registered [ 1.688072] io scheduler deadline registered [ 1.688097] io scheduler cfq registered (default) [ 1.688730] armada-370-pinctrl f1018000.pin-ctrl: registered pinctrl driver [ 1.689501] irq: Cannot allocate irq_descs @ IRQ39, assuming pre-allocated [ 1.689887] irq: Cannot allocate irq_descs @ IRQ71, assuming pre-allocated [ 1.690160] irq: Cannot allocate irq_descs @ IRQ103, assuming pre-allocated [ 1.690824] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00 [ 1.690840] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 1.690850] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff] [ 1.690861] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.690891] pci 0000:00:01.0: [11ab:6710] type 01 class 0x060400 [ 1.691113] PCI: bus0: Fast back to back transfers disabled [ 1.691125] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.691271] pci 0000:01:00.0: [1b21:1142] type 00 class 0x0c0330 [ 1.691303] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x40007fff 64bit] [ 1.691409] pci 0000:01:00.0: PME# supported from D3hot [ 1.691619] PCI: bus1: Fast back to back transfers disabled [ 1.691632] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.691699] pci 0000:00:01.0: BAR 8: assigned [mem 0xf8000000-0xf80fffff] [ 1.691714] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf8007fff 64bit] [ 1.691731] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.691743] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff] [ 1.691784] pci 0000:00:01.0: enabling device (0140 -> 0142) [ 1.691976] mv_xor f1060800.xor: Marvell shared XOR driver [ 1.733139] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.734141] mv_xor f1060900.xor: Marvell shared XOR driver [ 1.773107] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.774261] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.775472] console [ttyS0] disabled [ 1.795600] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 20, base_baud = 12500000) is a 16550A [ 2.477731] console [ttyS0] enabled [ 2.491597] brd: module loaded [ 2.499845] loop: module loaded [ 2.503519] sata_mv f10a0000.sata: version 1.28 [ 2.503675] sata_mv f10a0000.sata: slots 32 ports 1 [ 2.509548] scsi host0: sata_mv [ 2.512971] ata1: SATA max UDMA/133 irq 28 [ 2.518576] m25p80 spi0.0: mx25l8005 (1024 Kbytes) [ 2.523431] 1 ofpart partitions found on MTD device spi0.0 [ 2.528942] Creating 1 MTD partitions on "spi0.0": [ 2.533772] 0x000000000000-0x000000100000 : "u-boot" [ 2.540373] libphy: Fixed MDIO Bus: probed [ 2.544525] tun: Universal TUN/TAP device driver, 1.6 [ 2.549599] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.555928] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.564027] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.573109] libphy: orion_mdio_bus: probed [ 2.579209] mvneta f1074000.ethernet eth0: Using hardware mac address 00:10:75:58:85:a6 [ 2.587376] PPP generic driver version 2.4.2 [ 2.591792] PPP Deflate Compression module registered [ 2.596900] PPP MPPE Compression module registered [ 2.601720] NET: Registered protocol family 24 [ 2.606615] aoe: cannot create debugfs directory [ 2.611393] aoe: AoE v85 initialised. [ 2.615467] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0 [ 2.633417] md: linear personality registered for level -1 [ 2.638939] md: raid0 personality registered for level 0 [ 2.644296] md: raid1 personality registered for level 1 [ 2.649638] md: raid10 personality registered for level 10 [ 2.655399] md: raid6 personality registered for level 6 [ 2.660737] md: raid5 personality registered for level 5 [ 2.666089] md: raid4 personality registered for level 4 [ 2.671572] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 2.680282] device-mapper: multipath: version 1.11.0 loaded [ 2.685906] device-mapper: multipath round-robin: version 1.1.0 loaded [ 2.692479] device-mapper: multipath queue-length: version 0.2.0 loaded [ 2.699129] device-mapper: multipath service-time: version 0.3.0 loaded [ 2.705837] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 2.711966] device-mapper: raid: Loading target version 1.7.0 [ 2.718196] ledtrig-cpu: registered to indicate activity on CPUs [ 2.724502] marvell-cesa: probe of f1090000.crypto failed with error -22 [ 2.731354] hidraw: raw HID events driver (C) Jiri Kosina [ 2.737086] Netfilter messages via NETLINK v0.30. [ 2.741825] nfnl_acct: registering with nfnetlink. [ 2.746682] nf_conntrack version 0.5.0 (7969 buckets, 31876 max) [ 2.753369] ipip: IPv4 over IPv4 tunneling driver [ 2.758840] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.764391] NET: Registered protocol family 10 [ 2.769771] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.775380] sit: IPv6 over IPv4 tunneling driver [ 2.780615] NET: Registered protocol family 17 [ 2.785142] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.797836] Bridge firewalling registered [ 2.801869] NET: Registered protocol family 5 [ 2.806379] Key type dns_resolver registered [ 2.811131] registered taskstats version 1 [ 2.816232] console [netcon0] enabled [ 2.819915] netconsole: network logging started [ 2.824974] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.831907] rtc-mv f1010300.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.032402] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 3.043198] ata1.00: ATA-9: ST3000VN000-1HJ166, SC60, max UDMA/133 [ 3.049413] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.076860] ata1.00: configured for UDMA/133 [ 3.081515] scsi 0:0:0:0: Direct-Access ATA ST3000VN000-1HJ1 SC60 PQ: 0 ANSI: 5 [ 3.090633] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 3.098439] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.103923] sd 0:0:0:0: [sda] Write Protect is off [ 3.108743] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.108828] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.201485] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 3.208691] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.213409] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 3.247864] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem [ 3.255985] EXT4-fs (sda7): INFO: recovery required on readonly filesystem [ 3.262910] EXT4-fs (sda7): write access will be enabled during recovery [ 3.462835] EXT4-fs (sda7): recovery complete [ 3.502444] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 3.510174] VFS: Mounted root (ext3 filesystem) readonly on device 8:7. [ 3.517167] Freeing unused kernel memory: 232K (c0802000 - c083c000) [ 3.523559] This architecture does not have kernel memory protection. [ 3.897631] EXT4-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended [ 3.922453] EXT4-fs (sda7): re-mounted. Opts: (null) [ 4.711171] usbcore: registered new interface driver usbfs [ 4.716785] usbcore: registered new interface driver hub [ 4.722181] usbcore: registered new device driver usb [ 4.729217] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.736380] ehci-orion: EHCI orion driver [ 4.740571] orion-ehci f1050000.usb: EHCI Host Controller [ 4.746047] orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1 [ 4.753772] orion-ehci f1050000.usb: irq 26, io mem 0xf1050000 [ 4.772393] orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00 [ 4.778474] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.785312] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.792576] usb usb1: Product: EHCI Host Controller [ 4.797477] usb usb1: Manufacturer: Linux 4.6.6 ehci_hcd [ 4.802821] usb usb1: SerialNumber: f1050000.usb [ 4.807958] hub 1-0:1.0: USB hub found [ 4.811754] hub 1-0:1.0: 1 port detected [ 4.828936] usbcore: registered new interface driver usb-storage [ 4.846005] usbcore: registered new interface driver usblp [ 4.876773] Loading iSCSI transport class v2.0-870. [ 4.886106] iscsi: registered transport (tcp) [ 5.221119] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem [ 5.352674] EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended [ 5.382743] EXT4-fs (sda5): 2 orphan inodes deleted [ 5.387648] EXT4-fs (sda5): recovery complete [ 5.492444] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 5.569879] random: mkswap urandom read with 65 bits of entropy available [ 5.623653] Adding 524284k swap on /dev/sda3. Priority:-1 extents:1 across:524284k [ 17.612126] udevd (312): /proc/312/oom_adj is deprecated, please use /proc/312/oom_score_adj instead. [ 17.621501] udev: starting version 130 [ 18.296892] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 18.302173] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 18.370092] xhci_hcd 0000:01:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010 [ 18.731019] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 18.737881] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.745147] usb usb2: Product: xHCI Host Controller [ 18.750049] usb usb2: Manufacturer: Linux 4.6.6 xhci-hcd [ 18.755394] usb usb2: SerialNumber: 0000:01:00.0 [ 18.761216] hub 2-0:1.0: USB hub found [ 18.765538] hub 2-0:1.0: 2 ports detected [ 18.770037] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 18.775327] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 18.782908] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 18.791130] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 18.797967] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.805232] usb usb3: Product: xHCI Host Controller [ 18.810135] usb usb3: Manufacturer: Linux 4.6.6 xhci-hcd [ 18.815479] usb usb3: SerialNumber: 0000:01:00.0 [ 18.821200] hub 3-0:1.0: USB hub found [ 18.825509] hub 3-0:1.0: 2 ports detected [ 21.900742] random: nonblocking pool is initialized [ 26.072349] EXT4-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended [ 26.789384] EXT4-fs (sda8): recovery complete [ 26.812463] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr,acl,nodelalloc [ 28.102668] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 60.103132] mvneta f1074000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 60.111200] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

by **m1m1sm1t1c0** » Tue Feb 05, 2019 1:51 pm

dmesg for 7-2

Code: Select all: login as: root root@192.168.221.6's password: root@nas-mimismo:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.6 (root@fvdwsl-5big2.local) (gcc version 4.9.3 (GCC) ) #7 Sat Feb 2 22:31:59 CET 2019 [ 0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Seagate Personal Cloud (Cumulus, SRN21C) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c0881a4c, node_mem_map dfb7a000 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 510028K/524288K available (6123K kernel code, 291K rwdata, 2040K rodata, 228K init, 416K bss, 14260K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0800fbc (8164 kB) [ 0.000000] .init : 0xc0801000 - 0xc083a000 ( 228 kB) [ 0.000000] .data : 0xc083a000 - 0xc0882f60 ( 292 kB) [ 0.000000] .bss : 0xc0882f60 - 0xc08eb108 ( 417 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: DT/platform modifies aux control register: 0x12086302 -> 0x1a086302 [ 0.000000] Aurora cache controller enabled, 4 ways, 256 kB [ 0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302 [ 0.000000] Switching to timer-based delay loop, resolution 48ns [ 0.000007] sched_clock: 32 bits at 20MHz, resolution 48ns, wraps every 103356786663ns [ 0.000023] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 91987540234 ns [ 0.000292] Console: colour dummy device 80x30 [ 0.000311] Calibrating delay loop (skipped), value calculated using timer frequency.. 41.55 BogoMIPS (lpj=207773) [ 0.000323] pid_max: default: 32768 minimum: 301 [ 0.000452] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000462] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001054] CPU: Testing write buffer coherency: ok [ 0.001283] Setting up static identity map for 0x8200 - 0x8258 [ 0.001582] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1 [ 0.001712] mvebu-pmsu: Initializing Power Management Service Unit [ 0.005529] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 [ 0.005760] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.005862] xor: measuring software checksum speed [ 0.100056] arm4regs : 919.600 MB/sec [ 0.200055] 8regs : 772.400 MB/sec [ 0.300056] 32regs : 880.400 MB/sec [ 0.300063] xor: using function: arm4regs (919.600 MB/sec) [ 0.300090] pinctrl core: initialized pinctrl subsystem [ 0.300801] NET: Registered protocol family 16 [ 0.301290] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.301897] cpuidle: using governor ladder [ 0.306018] sram soc:sa-sram: found no memory resource [ 0.306039] sram: probe of soc:sa-sram failed with error -22 [ 0.306663] No ATAGs? [ 0.306678] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.306800] mvebu-pmsu: CPU idle is currently broken: disabling [ 0.480344] raid6: int32x1 gen() 142 MB/s [ 0.650200] raid6: int32x1 xor() 136 MB/s [ 0.820116] raid6: int32x2 gen() 213 MB/s [ 0.990080] raid6: int32x2 xor() 155 MB/s [ 1.160085] raid6: int32x4 gen() 179 MB/s [ 1.330090] raid6: int32x4 xor() 140 MB/s [ 1.500281] raid6: int32x8 gen() 175 MB/s [ 1.670129] raid6: int32x8 xor() 116 MB/s [ 1.670136] raid6: using algorithm int32x2 gen() 213 MB/s [ 1.670141] raid6: .... xor() 155 MB/s, rmw enabled [ 1.670147] raid6: using intx1 recovery algorithm [ 1.670707] SCSI subsystem initialized [ 1.670874] libata version 3.00 loaded. [ 1.672406] clocksource: Switched to clocksource armada_370_xp_clocksource [ 1.672696] FS-Cache: Loaded [ 1.678464] NET: Registered protocol family 2 [ 1.678965] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 1.679002] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 1.679039] TCP: Hash tables configured (established 4096 bind 4096) [ 1.679107] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 1.679121] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 1.679237] NET: Registered protocol family 1 [ 1.679512] RPC: Registered named UNIX socket transport module. [ 1.679519] RPC: Registered udp transport module. [ 1.679525] RPC: Registered tcp transport module. [ 1.679531] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.679548] PCI: CLS 0 bytes, default 64 [ 1.679795] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.680687] futex hash table entries: 256 (order: -1, 3072 bytes) [ 1.681275] workingset: timestamp_bits=13 max_order=17 bucket_order=4 [ 1.681635] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.681892] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.682256] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.682290] fuse init (API version 7.24) [ 1.682566] JFS: nTxBlock = 3984, nTxLock = 31876 [ 1.687881] async_tx: api initialized (async) [ 1.687977] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.687994] io scheduler noop registered [ 1.688007] io scheduler deadline registered [ 1.688036] io scheduler cfq registered (default) [ 1.688647] armada-370-pinctrl f1018000.pin-ctrl: registered pinctrl driver [ 1.689424] irq: Cannot allocate irq_descs @ IRQ39, assuming pre-allocated [ 1.689813] irq: Cannot allocate irq_descs @ IRQ71, assuming pre-allocated [ 1.690086] irq: Cannot allocate irq_descs @ IRQ103, assuming pre-allocated [ 1.690768] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00 [ 1.690784] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 1.690795] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff] [ 1.690806] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.690835] pci 0000:00:01.0: [11ab:6710] type 01 class 0x060400 [ 1.691052] PCI: bus0: Fast back to back transfers disabled [ 1.691064] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.691214] pci 0000:01:00.0: [1b21:1142] type 00 class 0x0c0330 [ 1.691246] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x40007fff 64bit] [ 1.691354] pci 0000:01:00.0: PME# supported from D3hot [ 1.691556] PCI: bus1: Fast back to back transfers disabled [ 1.691569] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.691635] pci 0000:00:01.0: BAR 8: assigned [mem 0xf8000000-0xf80fffff] [ 1.691650] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf8007fff 64bit] [ 1.691668] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.691680] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff] [ 1.691720] pci 0000:00:01.0: enabling device (0140 -> 0142) [ 1.691923] mv_xor f1060800.xor: Marvell shared XOR driver [ 1.733158] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.734180] mv_xor f1060900.xor: Marvell shared XOR driver [ 1.773135] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.774305] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.775527] console [ttyS0] disabled [ 1.795657] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 20, base_baud = 12500000) is a 16550A [ 2.477802] console [ttyS0] enabled [ 2.491659] brd: module loaded [ 2.499866] loop: module loaded [ 2.503548] sata_mv f10a0000.sata: version 1.28 [ 2.503710] sata_mv f10a0000.sata: slots 32 ports 1 [ 2.509573] scsi host0: sata_mv [ 2.513002] ata1: SATA max UDMA/133 irq 28 [ 2.518626] m25p80 spi0.0: mx25l8005 (1024 Kbytes) [ 2.523485] 1 ofpart partitions found on MTD device spi0.0 [ 2.528996] Creating 1 MTD partitions on "spi0.0": [ 2.533826] 0x000000000000-0x000000100000 : "u-boot" [ 2.540442] libphy: Fixed MDIO Bus: probed [ 2.544596] tun: Universal TUN/TAP device driver, 1.6 [ 2.549670] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.555995] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.564074] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.573159] libphy: orion_mdio_bus: probed [ 2.579220] mvneta f1074000.ethernet eth0: Using hardware mac address 00:10:75:58:85:a6 [ 2.587384] PPP generic driver version 2.4.2 [ 2.591797] PPP Deflate Compression module registered [ 2.596903] PPP MPPE Compression module registered [ 2.601722] NET: Registered protocol family 24 [ 2.606608] aoe: cannot create debugfs directory [ 2.611386] aoe: AoE v85 initialised. [ 2.615461] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0 [ 2.633419] md: linear personality registered for level -1 [ 2.638938] md: raid0 personality registered for level 0 [ 2.644296] md: raid1 personality registered for level 1 [ 2.649638] md: raid10 personality registered for level 10 [ 2.655401] md: raid6 personality registered for level 6 [ 2.660739] md: raid5 personality registered for level 5 [ 2.666090] md: raid4 personality registered for level 4 [ 2.671572] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 2.680290] device-mapper: multipath: version 1.11.0 loaded [ 2.685914] device-mapper: multipath round-robin: version 1.1.0 loaded [ 2.692486] device-mapper: multipath queue-length: version 0.2.0 loaded [ 2.699136] device-mapper: multipath service-time: version 0.3.0 loaded [ 2.705839] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 2.711967] device-mapper: raid: Loading target version 1.7.0 [ 2.718167] ledtrig-cpu: registered to indicate activity on CPUs [ 2.724483] marvell-cesa: probe of f1090000.crypto failed with error -22 [ 2.731350] hidraw: raw HID events driver (C) Jiri Kosina [ 2.737083] Netfilter messages via NETLINK v0.30. [ 2.741821] nfnl_acct: registering with nfnetlink. [ 2.746678] nf_conntrack version 0.5.0 (7969 buckets, 31876 max) [ 2.753354] ipip: IPv4 over IPv4 tunneling driver [ 2.758817] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.764365] NET: Registered protocol family 10 [ 2.769753] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.775378] sit: IPv6 over IPv4 tunneling driver [ 2.780627] NET: Registered protocol family 17 [ 2.785156] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.797855] Bridge firewalling registered [ 2.801890] NET: Registered protocol family 5 [ 2.806412] Key type dns_resolver registered [ 2.811178] registered taskstats version 1 [ 2.816280] console [netcon0] enabled [ 2.819962] netconsole: network logging started [ 2.825026] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.831959] rtc-mv f1010300.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.032429] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 3.043229] ata1.00: ATA-9: ST3000VN000-1HJ166, SC60, max UDMA/133 [ 3.049443] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.076889] ata1.00: configured for UDMA/133 [ 3.081529] scsi 0:0:0:0: Direct-Access ATA ST3000VN000-1HJ1 SC60 PQ: 0 ANSI: 5 [ 3.090641] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 3.098448] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.103929] sd 0:0:0:0: [sda] Write Protect is off [ 3.108749] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.108833] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.198089] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 3.205271] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.209968] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 3.244467] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem [ 3.252581] EXT4-fs (sda7): INFO: recovery required on readonly filesystem [ 3.259490] EXT4-fs (sda7): write access will be enabled during recovery [ 3.472856] EXT4-fs (sda7): recovery complete [ 3.512469] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 3.520201] VFS: Mounted root (ext3 filesystem) readonly on device 8:7. [ 3.527192] Freeing unused kernel memory: 228K (c0801000 - c083a000) [ 3.533585] This architecture does not have kernel memory protection. [ 3.904172] EXT4-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended [ 3.932480] EXT4-fs (sda7): re-mounted. Opts: (null) [ 4.717915] usbcore: registered new interface driver usbfs [ 4.723528] usbcore: registered new interface driver hub [ 4.728931] usbcore: registered new device driver usb [ 4.735952] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.743110] ehci-orion: EHCI orion driver [ 4.747308] orion-ehci f1050000.usb: EHCI Host Controller [ 4.752785] orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1 [ 4.760494] orion-ehci f1050000.usb: irq 26, io mem 0xf1050000 [ 4.782419] orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00 [ 4.788499] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.795336] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.802601] usb usb1: Product: EHCI Host Controller [ 4.807502] usb usb1: Manufacturer: Linux 4.6.6 ehci_hcd [ 4.812847] usb usb1: SerialNumber: f1050000.usb [ 4.817978] hub 1-0:1.0: USB hub found [ 4.821773] hub 1-0:1.0: 1 port detected [ 4.839059] usbcore: registered new interface driver usb-storage [ 4.856143] usbcore: registered new interface driver usblp [ 4.886860] Loading iSCSI transport class v2.0-870. [ 4.896170] iscsi: registered transport (tcp) [ 5.237881] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem [ 5.362699] EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended [ 5.392770] EXT4-fs (sda5): 2 orphan inodes deleted [ 5.397674] EXT4-fs (sda5): recovery complete [ 5.502470] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 5.576504] random: mkswap urandom read with 66 bits of entropy available [ 5.630284] Adding 524284k swap on /dev/sda3. Priority:-1 extents:1 across:524284k [ 17.699204] udevd (312): /proc/312/oom_adj is deprecated, please use /proc/312/oom_score_adj instead. [ 17.708576] udev: starting version 130 [ 18.084737] random: nonblocking pool is initialized [ 18.414695] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 18.419976] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 18.487893] xhci_hcd 0000:01:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010 [ 18.816042] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 18.822905] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.830163] usb usb2: Product: xHCI Host Controller [ 18.835072] usb usb2: Manufacturer: Linux 4.6.6 xhci-hcd [ 18.840411] usb usb2: SerialNumber: 0000:01:00.0 [ 18.846218] hub 2-0:1.0: USB hub found [ 18.850530] hub 2-0:1.0: 2 ports detected [ 18.855045] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 18.860310] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 18.867858] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 18.876091] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 18.882923] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.890180] usb usb3: Product: xHCI Host Controller [ 18.895090] usb usb3: Manufacturer: Linux 4.6.6 xhci-hcd [ 18.900428] usb usb3: SerialNumber: 0000:01:00.0 [ 18.906163] hub 3-0:1.0: USB hub found [ 18.910425] hub 3-0:1.0: 2 ports detected [ 26.173064] EXT4-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended [ 26.846580] EXT4-fs (sda8): recovery complete [ 26.872487] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr,acl,nodelalloc [ 28.162636] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.163169] mvneta f1074000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 31.171240] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

dmesg for X

Code: Select all: login as: root root@192.168.221.6's password: root@nas-mimismo:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.6 (root@fvdwsl-5big2.local) (gcc version 4.9.3 (GCC) ) #3 Mon Jun 4 22:11:11 CEST 2018 [ 0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Seagate Personal Cloud (Cumulus, SRN21C) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c0881a4c, node_mem_map dfb7a000 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 510036K/524288K available (6123K kernel code, 291K rwdata, 2040K rodata, 228K init, 416K bss, 14252K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0800fbc (8164 kB) [ 0.000000] .init : 0xc0801000 - 0xc083a000 ( 228 kB) [ 0.000000] .data : 0xc083a000 - 0xc0882f60 ( 292 kB) [ 0.000000] .bss : 0xc0882f60 - 0xc08eb108 ( 417 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: DT/platform modifies aux control register: 0x12086302 -> 0x1a086302 [ 0.000000] Aurora cache controller enabled, 4 ways, 256 kB [ 0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302 [ 0.000000] Switching to timer-based delay loop, resolution 48ns [ 0.000007] sched_clock: 32 bits at 20MHz, resolution 48ns, wraps every 103356786663ns [ 0.000023] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 91987540234 ns [ 0.000294] Console: colour dummy device 80x30 [ 0.000311] Calibrating delay loop (skipped), value calculated using timer frequency.. 41.55 BogoMIPS (lpj=207773) [ 0.000324] pid_max: default: 32768 minimum: 301 [ 0.000452] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000461] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001052] CPU: Testing write buffer coherency: ok [ 0.001280] Setting up static identity map for 0x8200 - 0x8258 [ 0.001581] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1 [ 0.001712] mvebu-pmsu: Initializing Power Management Service Unit [ 0.005473] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 [ 0.005705] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.005810] xor: measuring software checksum speed [ 0.100056] arm4regs : 919.600 MB/sec [ 0.200055] 8regs : 772.400 MB/sec [ 0.300057] 32regs : 880.400 MB/sec [ 0.300064] xor: using function: arm4regs (919.600 MB/sec) [ 0.300090] pinctrl core: initialized pinctrl subsystem [ 0.300786] NET: Registered protocol family 16 [ 0.301276] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.301886] cpuidle: using governor ladder [ 0.306000] sram soc:sa-sram: found no memory resource [ 0.306021] sram: probe of soc:sa-sram failed with error -22 [ 0.306553] No ATAGs? [ 0.306567] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.306690] mvebu-pmsu: CPU idle is currently broken: disabling [ 0.480346] raid6: int32x1 gen() 142 MB/s [ 0.650193] raid6: int32x1 xor() 136 MB/s [ 0.820115] raid6: int32x2 gen() 213 MB/s [ 0.990080] raid6: int32x2 xor() 155 MB/s [ 1.160084] raid6: int32x4 gen() 179 MB/s [ 1.330089] raid6: int32x4 xor() 140 MB/s [ 1.500282] raid6: int32x8 gen() 175 MB/s [ 1.670129] raid6: int32x8 xor() 116 MB/s [ 1.670136] raid6: using algorithm int32x2 gen() 213 MB/s [ 1.670141] raid6: .... xor() 155 MB/s, rmw enabled [ 1.670147] raid6: using intx1 recovery algorithm [ 1.670703] SCSI subsystem initialized [ 1.670871] libata version 3.00 loaded. [ 1.672405] clocksource: Switched to clocksource armada_370_xp_clocksource [ 1.672698] FS-Cache: Loaded [ 1.678460] NET: Registered protocol family 2 [ 1.678961] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 1.678998] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 1.679034] TCP: Hash tables configured (established 4096 bind 4096) [ 1.679103] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 1.679117] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 1.679231] NET: Registered protocol family 1 [ 1.679504] RPC: Registered named UNIX socket transport module. [ 1.679513] RPC: Registered udp transport module. [ 1.679518] RPC: Registered tcp transport module. [ 1.679523] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.679541] PCI: CLS 0 bytes, default 64 [ 1.679789] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.680692] futex hash table entries: 256 (order: -1, 3072 bytes) [ 1.681292] workingset: timestamp_bits=13 max_order=17 bucket_order=4 [ 1.681642] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.681893] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.682262] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.682296] fuse init (API version 7.24) [ 1.682577] JFS: nTxBlock = 3984, nTxLock = 31877 [ 1.687905] async_tx: api initialized (async) [ 1.688000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.688017] io scheduler noop registered [ 1.688031] io scheduler deadline registered [ 1.688060] io scheduler cfq registered (default) [ 1.688708] armada-370-pinctrl f1018000.pin-ctrl: registered pinctrl driver [ 1.689480] irq: Cannot allocate irq_descs @ IRQ39, assuming pre-allocated [ 1.689867] irq: Cannot allocate irq_descs @ IRQ71, assuming pre-allocated [ 1.690144] irq: Cannot allocate irq_descs @ IRQ103, assuming pre-allocated [ 1.690808] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00 [ 1.690825] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 1.690836] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff] [ 1.690847] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.690876] pci 0000:00:01.0: [11ab:6710] type 01 class 0x060400 [ 1.691096] PCI: bus0: Fast back to back transfers disabled [ 1.691107] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.691253] pci 0000:01:00.0: [1b21:1142] type 00 class 0x0c0330 [ 1.691285] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x40007fff 64bit] [ 1.691391] pci 0000:01:00.0: PME# supported from D3hot [ 1.691599] PCI: bus1: Fast back to back transfers disabled [ 1.691612] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.691678] pci 0000:00:01.0: BAR 8: assigned [mem 0xf8000000-0xf80fffff] [ 1.691694] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf8007fff 64bit] [ 1.691711] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.691723] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff] [ 1.691764] pci 0000:00:01.0: enabling device (0140 -> 0142) [ 1.691958] mv_xor f1060800.xor: Marvell shared XOR driver [ 1.733158] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.734181] mv_xor f1060900.xor: Marvell shared XOR driver [ 1.773129] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.774296] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.775510] console [ttyS0] disabled [ 1.795641] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 20, base_baud = 12500000) is a 16550A [ 2.477875] console [ttyS0] enabled [ 2.491738] brd: module loaded [ 2.499958] loop: module loaded [ 2.503628] sata_mv f10a0000.sata: version 1.28 [ 2.503786] sata_mv f10a0000.sata: slots 32 ports 1 [ 2.509659] scsi host0: sata_mv [ 2.513084] ata1: SATA max UDMA/133 irq 28 [ 2.518696] m25p80 spi0.0: mx25l8005 (1024 Kbytes) [ 2.523552] 1 ofpart partitions found on MTD device spi0.0 [ 2.529063] Creating 1 MTD partitions on "spi0.0": [ 2.533894] 0x000000000000-0x000000100000 : "u-boot" [ 2.540489] libphy: Fixed MDIO Bus: probed [ 2.544641] tun: Universal TUN/TAP device driver, 1.6 [ 2.549714] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.556044] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.564139] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.573223] libphy: orion_mdio_bus: probed [ 2.579269] mvneta f1074000.ethernet eth0: Using hardware mac address 00:10:75:58:85:a6 [ 2.587432] PPP generic driver version 2.4.2 [ 2.591850] PPP Deflate Compression module registered [ 2.596957] PPP MPPE Compression module registered [ 2.601775] NET: Registered protocol family 24 [ 2.606667] aoe: cannot create debugfs directory [ 2.611445] aoe: AoE v85 initialised. [ 2.615517] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0 [ 2.633468] md: linear personality registered for level -1 [ 2.638988] md: raid0 personality registered for level 0 [ 2.644345] md: raid1 personality registered for level 1 [ 2.649687] md: raid10 personality registered for level 10 [ 2.655445] md: raid6 personality registered for level 6 [ 2.660783] md: raid5 personality registered for level 5 [ 2.666135] md: raid4 personality registered for level 4 [ 2.671615] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 2.680328] device-mapper: multipath: version 1.11.0 loaded [ 2.685952] device-mapper: multipath round-robin: version 1.1.0 loaded [ 2.692526] device-mapper: multipath queue-length: version 0.2.0 loaded [ 2.699175] device-mapper: multipath service-time: version 0.3.0 loaded [ 2.705883] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 2.712012] device-mapper: raid: Loading target version 1.7.0 [ 2.718223] ledtrig-cpu: registered to indicate activity on CPUs [ 2.724539] marvell-cesa: probe of f1090000.crypto failed with error -22 [ 2.731396] hidraw: raw HID events driver (C) Jiri Kosina [ 2.737130] Netfilter messages via NETLINK v0.30. [ 2.741868] nfnl_acct: registering with nfnetlink. [ 2.746724] nf_conntrack version 0.5.0 (7969 buckets, 31876 max) [ 2.753395] ipip: IPv4 over IPv4 tunneling driver [ 2.758863] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.764410] NET: Registered protocol family 10 [ 2.769793] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.775419] sit: IPv6 over IPv4 tunneling driver [ 2.780659] NET: Registered protocol family 17 [ 2.785190] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.797888] Bridge firewalling registered [ 2.801923] NET: Registered protocol family 5 [ 2.806437] Key type dns_resolver registered [ 2.811196] registered taskstats version 1 [ 2.816316] console [netcon0] enabled [ 2.819997] netconsole: network logging started [ 2.825058] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.831989] rtc-mv f1010300.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.032426] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 3.043225] ata1.00: ATA-9: ST3000VN000-1HJ166, SC60, max UDMA/133 [ 3.049438] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.076886] ata1.00: configured for UDMA/133 [ 3.081544] scsi 0:0:0:0: Direct-Access ATA ST3000VN000-1HJ1 SC60 PQ: 0 ANSI: 5 [ 3.090653] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 3.098460] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.103940] sd 0:0:0:0: [sda] Write Protect is off [ 3.108760] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.108844] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.198252] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 3.205453] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.210151] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 3.244622] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem [ 3.252701] EXT4-fs (sda7): INFO: recovery required on readonly filesystem [ 3.259611] EXT4-fs (sda7): write access will be enabled during recovery [ 3.472863] EXT4-fs (sda7): recovery complete [ 3.512467] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 3.520199] VFS: Mounted root (ext3 filesystem) readonly on device 8:7. [ 3.527183] Freeing unused kernel memory: 228K (c0801000 - c083a000) [ 3.533575] This architecture does not have kernel memory protection. [ 3.904329] EXT4-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended [ 3.932477] EXT4-fs (sda7): re-mounted. Opts: (null) [ 4.717727] usbcore: registered new interface driver usbfs [ 4.723339] usbcore: registered new interface driver hub [ 4.728736] usbcore: registered new device driver usb [ 4.735762] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.742925] ehci-orion: EHCI orion driver [ 4.747116] orion-ehci f1050000.usb: EHCI Host Controller [ 4.752593] orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1 [ 4.760306] orion-ehci f1050000.usb: irq 26, io mem 0xf1050000 [ 4.782418] orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00 [ 4.788498] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.795334] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.802599] usb usb1: Product: EHCI Host Controller [ 4.807500] usb usb1: Manufacturer: Linux 4.6.6 ehci_hcd [ 4.812845] usb usb1: SerialNumber: f1050000.usb [ 4.817978] hub 1-0:1.0: USB hub found [ 4.821774] hub 1-0:1.0: 1 port detected [ 4.838981] usbcore: registered new interface driver usb-storage [ 4.856077] usbcore: registered new interface driver usblp [ 4.886769] Loading iSCSI transport class v2.0-870. [ 4.896084] iscsi: registered transport (tcp) [ 5.238030] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem [ 5.362694] EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended [ 5.392775] EXT4-fs (sda5): 2 orphan inodes deleted [ 5.397678] EXT4-fs (sda5): recovery complete [ 5.502468] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 5.576657] random: mkswap urandom read with 66 bits of entropy available [ 5.630432] Adding 524284k swap on /dev/sda3. Priority:-1 extents:1 across:524284k [ 17.628810] udevd (312): /proc/312/oom_adj is deprecated, please use /proc/312/oom_score_adj instead. [ 17.638183] udev: starting version 130 [ 18.014708] random: nonblocking pool is initialized [ 18.321341] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 18.326662] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 18.394552] xhci_hcd 0000:01:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010 [ 18.743665] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 18.750498] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.757784] usb usb2: Product: xHCI Host Controller [ 18.762695] usb usb2: Manufacturer: Linux 4.6.6 xhci-hcd [ 18.768032] usb usb2: SerialNumber: 0000:01:00.0 [ 18.773875] hub 2-0:1.0: USB hub found [ 18.778153] hub 2-0:1.0: 2 ports detected [ 18.782683] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 18.787949] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 18.795493] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 18.803726] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 18.810550] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.817817] usb usb3: Product: xHCI Host Controller [ 18.822725] usb usb3: Manufacturer: Linux 4.6.6 xhci-hcd [ 18.828068] usb usb3: SerialNumber: 0000:01:00.0 [ 18.833810] hub 3-0:1.0: USB hub found [ 18.838077] hub 3-0:1.0: 2 ports detected [ 26.133079] EXT4-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended [ 26.806741] EXT4-fs (sda8): recovery complete [ 26.832485] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr,acl,nodelalloc [ 28.122695] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.123228] mvneta f1074000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 31.131297] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

by **fvdw** » Tue Feb 05, 2019 8:37 pm

:thumbup so all kernel run meaning we can fiddle with dts file

In kernel 6 and 7 no trace of the leds-ns2l driver only in kernel 5 (as expected) I see this line

Code: Select all: [ 2.718151] leds-ns2l: probe of leds-ns2l failed with error -22

So it tries to load a driver but fails error 22 means an invalid value is used (EINVAL).
Looking to the code of the driver in probe function we see this

Code: Select all: static int __init ns2l_led_probe(struct platform_device *pdev) { struct ns2l_led_platform_data *pdata = pdev->dev.platform_data; struct ns2l_led_data *leds_data; int i; int ret; if (!pdata) return -EINVAL; leds_data = kzalloc(sizeof(struct ns2l_led_data) * pdata->num_leds, GFP_KERNEL); if (!leds_data) return -ENOMEM; for (i = 0; i < pdata->num_leds; i++) { ret = create_ns2l_led(pdev, &leds_data[i], &pdata->leds[i]); if (ret < 0) goto err; } platform_set_drvdata(pdev, leds_data); return 0; err: for (i = i - 1; i >= 0; i--) delete_ns2l_led(&leds_data[i]); kfree(leds_data); return ret; }

There is only one position were EINVAL is returned, when no platform data is found or platform data is wrong
So it seems we miss the required platform data :scratch
Need to investigate how to add it, I will come back asap with a new kernel

by **fvdw** » Wed Feb 06, 2019 10:34 am

Another trial kernel, now with an adapted led driver to load platform data (I hope)

by **m1m1sm1t1c0** » Thu Feb 07, 2019 2:08 pm

8... up and running, but led on one second, off one second.

Code: Select all: login as: root root@192.168.221.6's password: root@nas-mimismo:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.6 (root@fvdwsl-5big2.local) (gcc version 4.9.3 (GCC) ) #8 Wed Feb 6 11:24:06 CET 2019 [ 0.000000] CPU: ARMv7 Processor [561f5811] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Seagate Personal Cloud (Cumulus, SRN21C) [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c0881a8c, node_mem_map dfb7a000 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 510032K/524288K available (6123K kernel code, 291K rwdata, 2040K rodata, 228K init, 416K bss, 14256K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0800fe4 (8164 kB) [ 0.000000] .init : 0xc0801000 - 0xc083a000 ( 228 kB) [ 0.000000] .data : 0xc083a000 - 0xc0882fa0 ( 292 kB) [ 0.000000] .bss : 0xc0882fa0 - 0xc08eb108 ( 417 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: DT/platform modifies aux control register: 0x12086302 -> 0x1a086302 [ 0.000000] Aurora cache controller enabled, 4 ways, 256 kB [ 0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a086302 [ 0.000000] Switching to timer-based delay loop, resolution 48ns [ 0.000006] sched_clock: 32 bits at 20MHz, resolution 48ns, wraps every 103356786663ns [ 0.000023] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 91987540234 ns [ 0.000296] Console: colour dummy device 80x30 [ 0.000314] Calibrating delay loop (skipped), value calculated using timer frequency.. 41.55 BogoMIPS (lpj=207773) [ 0.000327] pid_max: default: 32768 minimum: 301 [ 0.000456] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000465] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001055] CPU: Testing write buffer coherency: ok [ 0.001281] Setting up static identity map for 0x8200 - 0x8258 [ 0.001585] mvebu-soc-id: MVEBU SoC ID=0x6710, Rev=0x1 [ 0.001717] mvebu-pmsu: Initializing Power Management Service Unit [ 0.005548] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 [ 0.005779] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.005883] xor: measuring software checksum speed [ 0.100056] arm4regs : 919.600 MB/sec [ 0.200055] 8regs : 772.400 MB/sec [ 0.300055] 32regs : 880.400 MB/sec [ 0.300062] xor: using function: arm4regs (919.600 MB/sec) [ 0.300083] pinctrl core: initialized pinctrl subsystem [ 0.300790] NET: Registered protocol family 16 [ 0.301269] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.301884] cpuidle: using governor ladder [ 0.305988] sram soc:sa-sram: found no memory resource [ 0.306010] sram: probe of soc:sa-sram failed with error -22 [ 0.306641] No ATAGs? [ 0.306656] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.306779] mvebu-pmsu: CPU idle is currently broken: disabling [ 0.480346] raid6: int32x1 gen() 142 MB/s [ 0.650194] raid6: int32x1 xor() 136 MB/s [ 0.820115] raid6: int32x2 gen() 213 MB/s [ 0.990081] raid6: int32x2 xor() 155 MB/s [ 1.160084] raid6: int32x4 gen() 179 MB/s [ 1.330089] raid6: int32x4 xor() 140 MB/s [ 1.500281] raid6: int32x8 gen() 175 MB/s [ 1.670129] raid6: int32x8 xor() 116 MB/s [ 1.670136] raid6: using algorithm int32x2 gen() 213 MB/s [ 1.670141] raid6: .... xor() 155 MB/s, rmw enabled [ 1.670147] raid6: using intx1 recovery algorithm [ 1.670708] SCSI subsystem initialized [ 1.670880] libata version 3.00 loaded. [ 1.672426] clocksource: Switched to clocksource armada_370_xp_clocksource [ 1.672716] FS-Cache: Loaded [ 1.678492] NET: Registered protocol family 2 [ 1.678995] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 1.679031] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 1.679069] TCP: Hash tables configured (established 4096 bind 4096) [ 1.679137] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 1.679151] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 1.679264] NET: Registered protocol family 1 [ 1.679539] RPC: Registered named UNIX socket transport module. [ 1.679548] RPC: Registered udp transport module. [ 1.679553] RPC: Registered tcp transport module. [ 1.679559] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.679576] PCI: CLS 0 bytes, default 64 [ 1.679824] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.680725] futex hash table entries: 256 (order: -1, 3072 bytes) [ 1.681316] workingset: timestamp_bits=13 max_order=17 bucket_order=4 [ 1.681680] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.681937] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.682302] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.682336] fuse init (API version 7.24) [ 1.682610] JFS: nTxBlock = 3984, nTxLock = 31877 [ 1.687947] async_tx: api initialized (async) [ 1.688042] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.688060] io scheduler noop registered [ 1.688074] io scheduler deadline registered [ 1.688103] io scheduler cfq registered (default) [ 1.688699] armada-370-pinctrl f1018000.pin-ctrl: registered pinctrl driver [ 1.689476] irq: Cannot allocate irq_descs @ IRQ39, assuming pre-allocated [ 1.689865] irq: Cannot allocate irq_descs @ IRQ71, assuming pre-allocated [ 1.690138] irq: Cannot allocate irq_descs @ IRQ103, assuming pre-allocated [ 1.690824] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00 [ 1.690841] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 1.690851] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff] [ 1.690862] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.690891] pci 0000:00:01.0: [11ab:6710] type 01 class 0x060400 [ 1.691109] PCI: bus0: Fast back to back transfers disabled [ 1.691120] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.691270] pci 0000:01:00.0: [1b21:1142] type 00 class 0x0c0330 [ 1.691302] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x40007fff 64bit] [ 1.691409] pci 0000:01:00.0: PME# supported from D3hot [ 1.691613] PCI: bus1: Fast back to back transfers disabled [ 1.691625] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.691692] pci 0000:00:01.0: BAR 8: assigned [mem 0xf8000000-0xf80fffff] [ 1.691707] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf8007fff 64bit] [ 1.691724] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.691736] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff] [ 1.691777] pci 0000:00:01.0: enabling device (0140 -> 0142) [ 1.691978] mv_xor f1060800.xor: Marvell shared XOR driver [ 1.733180] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.734198] mv_xor f1060900.xor: Marvell shared XOR driver [ 1.773155] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.774323] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.775547] console [ttyS0] disabled [ 1.795674] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 20, base_baud = 12500000) is a 16550A [ 2.477816] console [ttyS0] enabled [ 2.491678] brd: module loaded [ 2.499901] loop: module loaded [ 2.503580] sata_mv f10a0000.sata: version 1.28 [ 2.503743] sata_mv f10a0000.sata: slots 32 ports 1 [ 2.509608] scsi host0: sata_mv [ 2.513035] ata1: SATA max UDMA/133 irq 28 [ 2.518664] m25p80 spi0.0: mx25l8005 (1024 Kbytes) [ 2.523522] 1 ofpart partitions found on MTD device spi0.0 [ 2.529032] Creating 1 MTD partitions on "spi0.0": [ 2.533863] 0x000000000000-0x000000100000 : "u-boot" [ 2.540476] libphy: Fixed MDIO Bus: probed [ 2.544627] tun: Universal TUN/TAP device driver, 1.6 [ 2.549701] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.556026] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.564110] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.573194] libphy: orion_mdio_bus: probed [ 2.579253] mvneta f1074000.ethernet eth0: Using hardware mac address 00:10:75:58:85:a6 [ 2.587419] PPP generic driver version 2.4.2 [ 2.591833] PPP Deflate Compression module registered [ 2.596939] PPP MPPE Compression module registered [ 2.601758] NET: Registered protocol family 24 [ 2.606645] aoe: cannot create debugfs directory [ 2.611421] aoe: AoE v85 initialised. [ 2.615499] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0 [ 2.633458] md: linear personality registered for level -1 [ 2.638978] md: raid0 personality registered for level 0 [ 2.644337] md: raid1 personality registered for level 1 [ 2.649679] md: raid10 personality registered for level 10 [ 2.655445] md: raid6 personality registered for level 6 [ 2.660783] md: raid5 personality registered for level 5 [ 2.666133] md: raid4 personality registered for level 4 [ 2.671615] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 2.680333] device-mapper: multipath: version 1.11.0 loaded [ 2.685959] device-mapper: multipath round-robin: version 1.1.0 loaded [ 2.692531] device-mapper: multipath queue-length: version 0.2.0 loaded [ 2.699181] device-mapper: multipath service-time: version 0.3.0 loaded [ 2.705885] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 2.712013] device-mapper: raid: Loading target version 1.7.0 [ 2.718509] ledtrig-cpu: registered to indicate activity on CPUs [ 2.724835] marvell-cesa: probe of f1090000.crypto failed with error -22 [ 2.731698] hidraw: raw HID events driver (C) Jiri Kosina [ 2.737438] Netfilter messages via NETLINK v0.30. [ 2.742177] nfnl_acct: registering with nfnetlink. [ 2.747034] nf_conntrack version 0.5.0 (7969 buckets, 31876 max) [ 2.753710] ipip: IPv4 over IPv4 tunneling driver [ 2.759183] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.764733] NET: Registered protocol family 10 [ 2.770114] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.775741] sit: IPv6 over IPv4 tunneling driver [ 2.780987] NET: Registered protocol family 17 [ 2.785518] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.798217] Bridge firewalling registered [ 2.802252] NET: Registered protocol family 5 [ 2.806765] Key type dns_resolver registered [ 2.811531] registered taskstats version 1 [ 2.816621] console [netcon0] enabled [ 2.820304] netconsole: network logging started [ 2.825372] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.832307] rtc-mv f1010300.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.032449] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 3.043248] ata1.00: ATA-9: ST3000VN000-1HJ166, SC60, max UDMA/133 [ 3.049464] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.076908] ata1.00: configured for UDMA/133 [ 3.081552] scsi 0:0:0:0: Direct-Access ATA ST3000VN000-1HJ1 SC60 PQ: 0 ANSI: 5 [ 3.090669] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 3.098474] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.103954] sd 0:0:0:0: [sda] Write Protect is off [ 3.108774] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.108858] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.201700] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 3.208866] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.213585] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 3.248072] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem [ 3.256195] EXT4-fs (sda7): INFO: recovery required on readonly filesystem [ 3.263121] EXT4-fs (sda7): write access will be enabled during recovery [ 3.462887] EXT4-fs (sda7): recovery complete [ 3.502489] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 3.510220] VFS: Mounted root (ext3 filesystem) readonly on device 8:7. [ 3.517205] Freeing unused kernel memory: 228K (c0801000 - c083a000) [ 3.523598] This architecture does not have kernel memory protection. [ 3.927868] EXT4-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended [ 3.952499] EXT4-fs (sda7): re-mounted. Opts: (null) [ 4.741277] usbcore: registered new interface driver usbfs [ 4.746890] usbcore: registered new interface driver hub [ 4.752287] usbcore: registered new device driver usb [ 4.759289] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.766459] ehci-orion: EHCI orion driver [ 4.770652] orion-ehci f1050000.usb: EHCI Host Controller [ 4.776128] orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1 [ 4.783847] orion-ehci f1050000.usb: irq 26, io mem 0xf1050000 [ 4.802439] orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00 [ 4.808521] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.815359] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.822624] usb usb1: Product: EHCI Host Controller [ 4.827526] usb usb1: Manufacturer: Linux 4.6.6 ehci_hcd [ 4.832874] usb usb1: SerialNumber: f1050000.usb [ 4.838057] hub 1-0:1.0: USB hub found [ 4.841854] hub 1-0:1.0: 1 port detected [ 4.859052] usbcore: registered new interface driver usb-storage [ 4.876074] usbcore: registered new interface driver usblp [ 4.906840] Loading iSCSI transport class v2.0-870. [ 4.916147] iscsi: registered transport (tcp) [ 5.261469] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem [ 5.372724] EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended [ 5.402792] EXT4-fs (sda5): 2 orphan inodes deleted [ 5.407697] EXT4-fs (sda5): recovery complete [ 5.512490] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 5.590127] random: mkswap urandom read with 67 bits of entropy available [ 5.643912] Adding 524284k swap on /dev/sda3. Priority:-1 extents:1 across:524284k [ 17.692859] udevd (312): /proc/312/oom_adj is deprecated, please use /proc/312/oom_score_adj instead. [ 17.702198] udev: starting version 130 [ 18.341558] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 18.346880] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 18.414782] xhci_hcd 0000:01:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010 [ 18.797754] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 18.804616] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.811872] usb usb2: Product: xHCI Host Controller [ 18.816783] usb usb2: Manufacturer: Linux 4.6.6 xhci-hcd [ 18.822120] usb usb2: SerialNumber: 0000:01:00.0 [ 18.827986] hub 2-0:1.0: USB hub found [ 18.832256] hub 2-0:1.0: 2 ports detected [ 18.836764] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 18.842031] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 18.849574] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 18.857806] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 18.864640] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.871896] usb usb3: Product: xHCI Host Controller [ 18.876805] usb usb3: Manufacturer: Linux 4.6.6 xhci-hcd [ 18.882148] usb usb3: SerialNumber: 0000:01:00.0 [ 18.887884] hub 3-0:1.0: USB hub found [ 18.892141] hub 3-0:1.0: 2 ports detected [ 22.005328] random: nonblocking pool is initialized [ 26.250975] EXT4-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended [ 26.917009] EXT4-fs (sda8): recovery complete [ 26.942506] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr,acl,nodelalloc [ 28.232655] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.233187] mvneta f1074000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 31.241259] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

by **fvdw** » Thu Feb 07, 2019 3:19 pm

thank you, unfortunate it seems no the driver is not probed

Code: Select all: [ 2.712013] device-mapper: raid: Loading target version 1.7.0 [ 2.718509] ledtrig-cpu: registered to indicate activity on CPUs

I would have expected a line before ledtrig-cpu containing leds-ns2l like on kernel 5 :scratch

Closer look required at this driver..

When running kernel #8
Can you check if you see a platform devices a folder with name "leds-ns2l" in /sys/devices/platform and post what is in there

plugout.net

FVDW-SL on a Seagate Personal Cloud - additional steps

Re: FVDW-SL on a Seagate Personal Cloud - additional steps

Re: FVDW-SL on a Seagate Personal Cloud - additional steps

Re: FVDW-SL on a Seagate Personal Cloud - additional steps

Re: FVDW-SL on a Seagate Personal Cloud - additional steps

Re: FVDW-SL on a Seagate Personal Cloud - additional steps

Re: FVDW-SL on a Seagate Personal Cloud - additional steps

Re: FVDW-SL on a Seagate Personal Cloud - additional steps

Re: FVDW-SL on a Seagate Personal Cloud - additional steps

Re: FVDW-SL on a Seagate Personal Cloud - additional steps

Re: FVDW-SL on a Seagate Personal Cloud - additional steps

Who is online