Kernel #14 update - 5bigN2 unavailable

[fvdw]

I disabled bonding on my 5big2 and rebooted, then no bonding driver is loaded
(no out put from command dmesg | grep bonding)

are you sure you enabled bonding in the LAN setup window of the web interface ? :tapfoot

[macdalor]

I disabled bonding on my 5big2 and rebooted, then no bonding driver is loaded
(no out put from command dmesg | grep bonding)

are you sure you enabled bonding in the LAN setup window of the web interface ? :tapfoot

is there anywhere else this can be activated???

[Jocko]

More and more understandable...
Check if you still have run permissions on the bonding file

Code: Select all

ls -l /lib/modules/3.14.2/bonding.ko

[macdalor]

@fvdw btw, yes, bonding was working fine pre kernel #14 install...something seems to be blocking the option on my machine with this kernel. The only thing is if it happens to me it might also happen to others...

[macdalor]

Check if you still have run permissions on the bonding file

Code: Select all

ls -l /lib/modules/3.14.2/bonding.ko

Code: Select all

root@lacie5big:/ # ls -l /lib/modules/3.14.2/bonding.ko
-rwxr-xr-x  1 root root 137266 2015-09-03 18:45 /lib/modules/3.14.2/bonding.ko

[fvdw]

long shot...the kernel you downloaded is corrupted in the download process

I added it again

the md5sum of the extracted kernel is
8535dbd4b99b069d0abbfffcdce7e611

you can check this if you put it on the nas root directory and then give command

Code: Select all

md5sum UIMAGE-3142-NWSP2CL-14

it should then give this reponse
8535dbd4b99b069d0abbfffcdce7e611 UIMAGE-3142-NWSP2CL-14

if you have the kernel still in the fvdw folderyou could use command

Code: Select all

md5sum /direct-usb/fvdw/UIMAGE-3142-NWSP2CL-14

if the md5sum deviates from this number then the kernel is corrupt

[macdalor]

the file is in the fvdw folder but the command tells me it can't find it...

Code: Select all

root@lacie5big:/ # md5sum /share/1000/fvdw/UIMAGE-3142-NWSP2CL-14
md5sum: can't open '/share/1000/fvdw/UIMAGE-3142-NWSP2CL-14': No such file or directory

never mind, I'll try loading the new file you just attached...

---edit---
I had edited fvdw's post (changed the path of fvdw share)
Jocko

[fvdw]

which option did you set in this menu ?

bonding.JPG

[macdalor]

the 2nd option

[fvdw]

ok I tried that also and it works on my system with kernel #14

to check md5sum of the kernel you can use this command (seems fvdw share is not on sda in your setup, or sda is not mounted on /share/1000)

Code: Select all

md5sum /direct-usb/fvdw/UIMAGE-3142-NWSP2CL-14