WGet problem after install all 3 patch

WGet problem after install all 3 patch

Postby Acquarious81 » Wed Dec 09, 2015 11:05 pm

HI,

i've just installed all 3 patch for 16.1 firmware.. and now the WGet tool not working more...

i've used this tab a lot of time before patch ... but now , i fill the fields but accept button remain disabled!... i've tried reboot .. but nothing..
Acquarious81
Donator VIP
Donator VIP
 
Posts: 24
Joined: Sat Nov 28, 2015 8:28 pm

Re: WGet problem after install all 3 patch

Postby Acquarious81 » Wed Dec 09, 2015 11:13 pm

... not work also all Web/P2p Downloaders Tabs!!!.... if i try to select all the other tab result a blank tab with only the name of the tool..

how i can return back before patch??
Acquarious81
Donator VIP
Donator VIP
 
Posts: 24
Joined: Sat Nov 28, 2015 8:28 pm

Re: WGet problem after install all 3 patch

Postby Acquarious81 » Thu Dec 10, 2015 1:09 am

OK, i'm sorry... there was 2 different problem.. the first one.. is after the update the tab goes wrong.. and i've resolved with the consolle programm (write firmware), and all my configurations are safe with back to fvdw back to 16.0, after that i've update to 16.1 and the tabs now goes right...

the second bug... wget with "disabled" accept button... the problem is the URL i've insert.... it contain "(" and ")" ... if i delete this .. accept button will be active.. but i can't change the url.. so i tried to use a file for the url.. (the second choice).. and it's goes right.. but i've to insert username and password in the url .. like ftp://username:pass@site.com

because with the standard fields in the tab not work.. and the log say (incorrect login anonymous)
Acquarious81
Donator VIP
Donator VIP
 
Posts: 24
Joined: Sat Nov 28, 2015 8:28 pm

Re: WGet problem after install all 3 patch

Postby Jocko » Thu Dec 10, 2015 8:09 am

he first one.. is after the update the tab goes wrong.. and i've resolved with the consolle programm (write firmware), and all my configurations are safe with back to fvdw back to 16.0, after that i've update to 16.1 and the tabs now goes right...

:disapprove :disapprove :disapprove
Before doing a such restoring, you should wait.
Indeed, you should resolve your issue just by closing your browser or reloading fully the interface! (cache issue) :pound

Can you test this by installing again the 3 patches.

the second bug... wget with "disabled" accept button... the problem is the URL i've insert.... it contain "(" and ")" ... if i delete this .. accept button will be active.. but i can't change the url.. so i tried to use a file for the url.. (the second choice).. and it's goes right.. but i've to insert username and password in the url .. like ftp://username:pass@site.com

because with the standard fields in the tab not work.. and the log say (incorrect login anonymous)
Indeed this menu checks the url and Accept button is disabled if it contains forbidden char.
So I assume ( and ) are in your credential so need to see if the check on these fields is not too hard.
Jocko
Site Admin - expert
 
Posts: 11529
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: WGet problem after install all 3 patch

Postby Acquarious81 » Thu Dec 10, 2015 12:10 pm

Jocko wrote:
he first one.. is after the update the tab goes wrong.. and i've resolved with the consolle programm (write firmware), and all my configurations are safe with back to fvdw back to 16.0, after that i've update to 16.1 and the tabs now goes right...

:disapprove :disapprove :disapprove
Before doing a such restoring, you should wait.
Indeed, you should resolve your issue just by closing your browser or reloading fully the interface! (cache issue) :pound


I've tried also with a another pc.... i've tried to clear all the cache... also with another browser.. but nothing.. the strange thing is i've tried to reload file by file from firmware.img , with patch.zip files like list.. but nothing...
....

i'll retest every patch.. but one by one.. instead of all in one time... but if one goes wrong.. can i return back without re-write firmware by consolle software??

So I assume ( and ) are in your credential so need to see if the check on these fields is not too hard.


( and ) are in the file name and in the folder that contain it.. in a ftp server..
Acquarious81
Donator VIP
Donator VIP
 
Posts: 24
Joined: Sat Nov 28, 2015 8:28 pm

Re: WGet problem after install all 3 patch

Postby Jocko » Thu Dec 10, 2015 1:33 pm

:scratch Ok for a clean test do this:
- clear your browser cache
- install again version 16.1 with the file available: and the firmware update menu (no need to use fvdw-sl console)
- load at least one time the menus where you failed to load
- install the patch one by one and after each install :
* reload the web-interface
* load these same menus

If you get again the same behaviour, that means that there is an issue with the patch content.

Acquarious81 wrote:( and ) are in the file name and in the folder that contain it.. in a ftp server..
Indeed, when you have a ftp url you can have these chars and some others not supported with a http url. So for ftp link, I go to remove the check.
Jocko
Site Admin - expert
 
Posts: 11529
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: WGet problem after install all 3 patch

Postby Jocko » Thu Dec 10, 2015 3:01 pm

Well there is something wrong on your side. :whistle

I made two tests one on my 5big2 and the other on a nwsp2. So from a clean version 16.1, I installed the 3 patches and used Chrome which occurs the most browser cache issues.

Never, I got your problem even when I installed the patches in a same time. No issue also if I did not reload the web-interface (the new versions are loaded in Chrome with the Web/P2P menus :thumbup ).

So I advice you to reinstall version 16.1 by using the firmware update menu and upload again the patch.
Jocko
Site Admin - expert
 
Posts: 11529
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: WGet problem after install all 3 patch

Postby Acquarious81 » Fri Dec 11, 2015 6:07 pm

Jocko wrote:No (it is just a warning as you don't have yet fully set web-explorer).

Note: do you try to re-install the patch ? (as I am sure now it is an issue on your side)



It's a very strange thing... i reinstalled all tree patches... the only different is now i've installed one patch.. reboot the nas.. try the site.. and after install the next one patch...

NO ISSUES now....

it's all ok....
Acquarious81
Donator VIP
Donator VIP
 
Posts: 24
Joined: Sat Nov 28, 2015 8:28 pm

Re: WGet problem after install all 3 patch

Postby Jocko » Fri Dec 11, 2015 6:14 pm

Yes It is strange or do you make previously some manual changes on the folder /usr/htdocs ?

About wget menu on ftp url, I fixed the issue and I go to send you a package this evening to test the change
Jocko
Site Admin - expert
 
Posts: 11529
Joined: Tue Apr 12, 2011 4:48 pm
Location: Orleans, France

Re: WGet problem after install all 3 patch

Postby Acquarious81 » Sat Dec 12, 2015 1:44 pm

Jocko wrote:Yes It is strange or do you make previously some manual changes on the folder /usr/htdocs ?

About wget menu on ftp url, I fixed the issue and I go to send you a package this evening to test the change



no, i don't....make changes to /usr/htdocs... but i notice site taked a lot more time to "execution command, please wait..." and when i've tried to reinstall the firmware with firmware update, it stopped at "unable to rename firmware file" o something.. it's seem like the httpd don't had root right....

i've wait your fix..

thx
Acquarious81
Donator VIP
Donator VIP
 
Posts: 24
Joined: Sat Nov 28, 2015 8:28 pm


Return to Lacie Network Space vs2 and max version

Who is online

Users browsing this forum: No registered users and 7 guests