plugout.net

by **Jocko** » Wed Sep 23, 2015 9:49 am

so you created only partitions 4 .. 8 (that's good)
=> forgot the commands for sd[bcde][12] but do the others for partitions 5 and 7

by **b1gnas** » Wed Sep 23, 2015 10:11 am

Code: Select all: root@fvdwsl-base:/ # dd if=/dev/zero of=/dev/sdb7 dd: writing to `/dev/sdb7': No space left on device 1028161+0 records in 1028160+0 records out root@fvdwsl-base:/ # dd if=/dev/zero of=/dev/sdb5 dd: writing to `/dev/sdb5': No space left on device 1670761+0 records in 1670760+0 records out root@fvdwsl-base:/ # dd if=/dev/zero of=/dev/sdc5 dd: writing to `/dev/sdc5': No space left on device 1670761+0 records in 1670760+0 records out root@fvdwsl-base:/ # dd if=/dev/zero of=/dev/sdc7 dd: writing to `/dev/sdc7': No space left on device 1028161+0 records in 1028160+0 records out root@fvdwsl-base:/ # dd if=/dev/zero of=/dev/sdd7 dd: writing to `/dev/sdd7': No space left on device 1028161+0 records in 1028160+0 records out root@fvdwsl-base:/ # dd if=/dev/zero of=/dev/sdd5 dd: writing to `/dev/sdd5': No space left on device 1670761+0 records in 1670760+0 records out root@fvdwsl-base:/ # dd if=/dev/zero of=/dev/sde5 dd: writing to `/dev/sde5': No space left on device 1670761+0 records in 1670760+0 records out root@fvdwsl-base:/ # dd if=/dev/zero of=/dev/sde7 dd: writing to `/dev/sde7': No space left on device 1028161+0 records in 1028160+0 records out root@fvdwsl-base:/ # mkdir /tmp/sda7 root@fvdwsl-base:/ # mount /dev/sda7 /tmp/sda7 root@fvdwsl-base:/ # ls -l /tmp/sda7/dev/sd[abcde][0-9] brw-rw---- 1 root root 8, 65 2015-09-22 14:25 /tmp/sda7/dev/sda1 brw-rw---- 1 root root 8, 66 2015-09-22 14:10 /tmp/sda7/dev/sda2 brw-rw---- 1 root root 8, 67 2015-09-22 14:11 /tmp/sda7/dev/sda3 brw-rw---- 1 root root 8, 68 2015-09-22 14:10 /tmp/sda7/dev/sda4 brw-rw---- 1 root root 8, 69 2015-09-22 14:10 /tmp/sda7/dev/sda5 brw-rw---- 1 root root 8, 70 2015-09-22 14:10 /tmp/sda7/dev/sda6 brw-rw---- 1 root root 8, 71 2015-09-22 14:10 /tmp/sda7/dev/sda7 brw-rw---- 1 root root 8, 72 2015-09-22 14:10 /tmp/sda7/dev/sda8 brw-rw-rw- 1 root root 8, 9 2013-08-09 21:22 /tmp/sda7/dev/sda9 brw-r--r-- 1 root root 8, 17 2008-01-03 21:06 /tmp/sda7/dev/sdb1 brw-r--r-- 1 root root 8, 18 2008-01-03 21:06 /tmp/sda7/dev/sdb2 brw-r--r-- 1 root root 8, 19 2008-01-03 21:06 /tmp/sda7/dev/sdb3 brw-rw---- 1 root root 8, 52 2015-09-22 14:10 /tmp/sda7/dev/sdb4 brw-rw---- 1 root root 8, 53 2015-09-22 14:10 /tmp/sda7/dev/sdb5 brw-rw---- 1 root root 8, 54 2015-09-22 14:10 /tmp/sda7/dev/sdb6 brw-rw---- 1 root root 8, 55 2015-09-22 14:10 /tmp/sda7/dev/sdb7 brw-rw---- 1 root root 8, 56 2015-09-22 14:10 /tmp/sda7/dev/sdb8 brw-rw---- 1 root root 8, 36 2015-09-22 14:10 /tmp/sda7/dev/sdc4 brw-rw---- 1 root root 8, 37 2015-09-22 14:10 /tmp/sda7/dev/sdc5 brw-rw---- 1 root root 8, 38 2015-09-22 14:10 /tmp/sda7/dev/sdc6 brw-rw---- 1 root root 8, 39 2015-09-22 14:10 /tmp/sda7/dev/sdc7 brw-rw---- 1 root root 8, 40 2015-09-22 14:10 /tmp/sda7/dev/sdc8 brw-rw---- 1 root root 8, 20 2015-09-22 14:10 /tmp/sda7/dev/sdd4 brw-rw---- 1 root root 8, 21 2015-09-22 14:10 /tmp/sda7/dev/sdd5 brw-rw---- 1 root root 8, 22 2015-09-22 14:10 /tmp/sda7/dev/sdd6 brw-rw---- 1 root root 8, 23 2015-09-22 14:10 /tmp/sda7/dev/sdd7 brw-rw---- 1 root root 8, 24 2015-09-22 14:10 /tmp/sda7/dev/sdd8 brw-rw---- 1 root root 8, 4 2015-09-22 14:10 /tmp/sda7/dev/sde4 brw-rw---- 1 root root 8, 5 2015-09-22 14:10 /tmp/sda7/dev/sde5 brw-rw---- 1 root root 8, 6 2015-09-22 14:10 /tmp/sda7/dev/sde6 brw-rw---- 1 root root 8, 7 2015-09-22 14:10 /tmp/sda7/dev/sde7 brw-rw---- 1 root root 8, 8 2015-09-22 14:10 /tmp/sda7/dev/sde8 root@fvdwsl-base:/ #

same error selecting as new addons volume RD5-0

rebooting

by **Jocko** » Wed Sep 23, 2015 10:15 am

b1gnas wrote:same error selecting as new addons volume RD5-0

Useless to report this...I repeat the hwclock issue is NOT related with the other issue and with the other outputs, you succeed to select it but your lose this selected volume after rebooting :pound

On sda7 the dev nodes are ok. :thumbup

by **b1gnas** » Wed Sep 23, 2015 10:23 am

Jocko wrote:
b1gnas wrote:same error selecting as new addons volume RD5-0
Useless to report this...I repeat the hwclock issue is NOT related with the other issue and with the other outputs, you succeed to select it but your lose this selected volume after rebooting :pound

On sda7 the dev nodes are ok. :thumbup

ok :razz2

Code: Select all: root@fvdwsl-base:/ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.2 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #1 Thu Jan 8 23:24:14 CET 2015 [ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: LaCie 5Big1 Network [ 0.000000] Clearing invalid memory bank 0KB@0x00000000 [ 0.000000] Clearing invalid memory bank 0KB@0x00000000 [ 0.000000] Clearing invalid memory bank 0KB@0x00000000 [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c03de85c, node_mem_map c7efb000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro boardType=mv88F5281 productType=5Big reset=0 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 125736K/131072K available (2809K kernel code, 158K rwdata, 848K rodata, 114K init, 206K bss, 5336K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc039a7f0 (3658 kB) [ 0.000000] .init : 0xc039b000 - 0xc03b78c8 ( 115 kB) [ 0.000000] .data : 0xc03b8000 - 0xc03df9e0 ( 159 kB) [ 0.000000] .bss : 0xc03df9e0 - 0xc04135c0 ( 207 kB) [ 0.000000] NR_IRQS:64 [ 0.000016] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns [ 25.619756] Console: colour dummy device 80x30 [ 25.619795] Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464) [ 25.679450] pid_max: default: 32768 minimum: 301 [ 25.679657] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 25.679684] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 25.680527] CPU: Testing write buffer coherency: ok [ 25.681044] Setting up static identity map for 0x2a8b20 - 0x2a8b5c [ 25.684523] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 25.685486] NET: Registered protocol family 16 [ 25.686363] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 25.689552] 5big1 init started [ 25.689582] Orion ID: MV88F5281-D0. TCLK=166666667. [ 25.689642] Orion: Applying 5281 D0 WFI workaround. [ 25.689991] 5big1 init 1 [ 25.690013] initial MPP regs: 00000003 00000000 00170000 [ 25.690052] final MPP regs: 00000003 00000000 00170000 [ 25.690081] 5big1 init 2 [ 25.690098] net5big: powering up SATA drives [ 25.690118] 5big1 init 3 [ 25.690132] 5big1 init 4 [ 25.690488] 5big1 init 5 [ 25.691429] 5big1 init 6 [ 25.691758] 5big1 init 7 [ 25.692086] 5big1 init 8 [ 25.692422] 5big1 init 9 [ 25.692754] 5big1 init 10 [ 25.693399] 5big1 init 11 [ 25.693726] 5big1 init 12 [ 25.693749] net5big: turning off power-off control GPIO [ 25.693773] net5big: Flash writing is not yet supported. [ 25.693787] 5big1 init end [ 25.694734] orion_gpio_is_valid: invalid GPIO 20 [ 25.694757] orion_gpio_is_valid: invalid GPIO 20 [ 25.694774] net5big_pci_preinit failed to gpio_request 20 [ 25.695326] PCI host bridge to bus 0000:00 [ 25.695371] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff] [ 25.695401] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 25.695430] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 25.695492] pci 0000:00:00.0: [11ab:5281] type 00 class 0x058000 [ 25.695541] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref] [ 25.695574] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x07ffffff] [ 25.696145] PCI: bus0: Fast back to back transfers disabled [ 25.696185] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 25.696740] PCI host bridge to bus 0000:01 [ 25.696783] pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff] [ 25.696813] pci_bus 0000:01: root bus resource [io 0x10000-0x1ffff] [ 25.696842] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff] [ 25.696915] pci 0000:01:00.0: [11ab:5281] type 00 class 0x058000 [ 25.696971] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x07ffffff 64bit pref] [ 25.697010] pci 0000:01:00.0: reg 0x18: [mem 0x10000000-0x1fffffff 64bit pref] [ 25.697047] pci 0000:01:00.0: reg 0x20: [mem 0xf1000000-0xf10fffff 64bit] [ 25.697083] pci 0000:01:00.0: reg 0x30: [mem 0xe0000000-0xe7ffffff pref] [ 25.697146] pci 0000:01:00.0: supports D1 D2 [ 25.697172] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot [ 25.697737] pci 0000:01:07.0: [11ab:6081] type 00 class 0x010000 [ 25.697802] pci 0000:01:07.0: reg 0x10: [mem 0x40000000-0x400fffff 64bit] [ 25.697838] pci 0000:01:07.0: reg 0x18: [io 0xf0100000-0xf01000ff] [ 25.698442] PCI: bus1: Fast back to back transfers enabled [ 25.698481] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 25.698560] pci 0000:01:07.0: BAR 0: assigned [mem 0xe8000000-0xe80fffff 64bit] [ 25.698603] pci 0000:01:07.0: BAR 2: assigned [io 0x10000-0x100ff] [ 25.728173] bio: create slab <bio-0> at 0 [ 25.729585] vgaarb: loaded [ 25.730895] SCSI subsystem initialized [ 25.731849] libata version 3.00 loaded. [ 25.733690] usbcore: registered new interface driver usbfs [ 25.734065] usbcore: registered new interface driver hub [ 25.734492] usbcore: registered new device driver usb [ 25.737585] Switched to clocksource orion_clocksource [ 25.765578] NET: Registered protocol family 2 [ 25.766445] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 25.766504] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 25.766553] TCP: Hash tables configured (established 1024 bind 1024) [ 25.766662] TCP: reno registered [ 25.766689] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 25.766744] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 25.767053] NET: Registered protocol family 1 [ 25.767145] PCI: CLS 32 bytes, default 32 [ 25.769881] futex hash table entries: 256 (order: -1, 3072 bytes) [ 25.770816] VFS: Disk quotas dquot_6.5.2 [ 25.770916] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 25.771182] msgmni has been set to 245 [ 25.773875] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 25.773903] io scheduler noop registered [ 25.773922] io scheduler deadline registered [ 25.773963] io scheduler cfq registered (default) [ 25.774442] mv_xor mv_xor.0: Marvell shared XOR driver [ 25.789478] mv_xor mv_xor.0: Self-test copy failed compare, disabling [ 25.801119] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 25.823054] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3, base_baud = 10416666) is a 16550A [ 26.348547] console [ttyS0] enabled [ 26.371421] brd: module loaded [ 26.383877] loop: module loaded [ 26.387634] Uniform Multi-Platform E-IDE driver [ 26.392814] ide-gd driver 1.18 [ 26.397321] sata_mv 0000:01:07.0: version 1.28 [ 26.397983] sata_mv 0000:01:07.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx [ 26.437026] scsi0 : sata_mv [ 26.441021] scsi1 : sata_mv [ 26.444866] scsi2 : sata_mv [ 26.448735] scsi3 : sata_mv [ 26.452614] scsi4 : sata_mv [ 26.456484] scsi5 : sata_mv [ 26.460384] scsi6 : sata_mv [ 26.464257] scsi7 : sata_mv [ 26.467902] ata1: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8022000 irq 52 [ 26.475578] ata2: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8024000 irq 52 [ 26.483234] ata3: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8026000 irq 52 [ 26.490888] ata4: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8028000 irq 52 [ 26.498519] ata5: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8032000 irq 52 [ 26.506173] ata6: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8034000 irq 52 [ 26.513827] ata7: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8036000 irq 52 [ 26.521474] ata8: SATA max UDMA/133 mmio m1048576@0xe8000000 port 0xe8038000 irq 52 [ 26.531007] sata_mv sata_mv.0: version 1.28 [ 26.531235] sata_mv sata_mv.0: cannot get optional clkdev [ 26.538832] sata_mv sata_mv.0: slots 32 ports 5 [ 26.562582] scsi8 : sata_mv [ 26.566476] scsi9 : sata_mv [ 26.570404] scsi10 : sata_mv [ 26.574388] scsi11 : sata_mv [ 26.578356] scsi12 : sata_mv [ 26.582148] ata9: SATA max UDMA/133 irq 29 [ 26.586249] ata10: SATA max UDMA/133 irq 29 [ 26.590461] ata11: SATA max UDMA/133 irq 29 [ 26.594637] ata12: SATA max UDMA/133 irq 29 [ 26.598810] ata13: SATA max UDMA/133 irq 29 [ 26.604421] tun: Universal TUN/TAP device driver, 1.6 [ 26.609498] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 26.616059] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 26.625028] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 26.641652] libphy: orion_mdio_bus: probed [ 26.646123] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 26.731947] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 48:00:30:00:b0:33 [ 26.743005] aoe: cannot create debugfs directory [ 26.747848] aoe: AoE v85 initialised. [ 26.752589] i2c /dev entries driver [ 27.039511] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 27.079539] ata1.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 27.085712] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 27.149548] ata1.00: configured for UDMA/133 [ 27.154335] scsi 0:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 [ 27.163438] fvdw1 disk index before get_sd_name = 0 [ 27.168303] device-name= sata_mv [ 27.171554] fvdw2 disk index after get_sd_name = 4 [ 27.176329] fvdw3 prefix[0]=s prefix[1]=d [ 27.180430] fvdw4 diskname = sde [ 27.184645] sd 0:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 27.192318] sd 0:0:0:0: [sde] 4096-byte physical blocks [ 27.199589] sd 0:0:0:0: [sde] Write Protect is off [ 27.204385] sd 0:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 27.204672] sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.259617] sde: sde4 < sde5 sde6 sde7 sde8 > [ 27.268446] sd 0:0:0:0: [sde] Attached SCSI disk [ 27.669463] ata9: failed to resume link (SControl 0) [ 27.674435] ata9: SATA link down (SStatus 0 SControl 0) [ 27.699497] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 27.739552] ata2.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 27.745723] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 27.809549] ata2.00: configured for UDMA/133 [ 27.814299] scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 [ 27.823414] fvdw1 disk index before get_sd_name = 1 [ 27.828286] device-name= sata_mv [ 27.831540] fvdw2 disk index after get_sd_name = 3 [ 27.836312] fvdw3 prefix[0]=s prefix[1]=d [ 27.840414] fvdw4 diskname = sdd [ 27.844576] sd 1:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 27.852250] sd 1:0:0:0: [sdd] 4096-byte physical blocks [ 27.859362] sd 1:0:0:0: [sdd] Write Protect is off [ 27.864196] sd 1:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 27.864485] sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.919723] sdd: sdd4 < sdd5 sdd6 sdd7 sdd8 > [ 27.928470] sd 1:0:0:0: [sdd] Attached SCSI disk [ 28.359497] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 28.399538] ata3.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 28.405706] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 28.469547] ata3.00: configured for UDMA/133 [ 28.474305] scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 [ 28.483376] fvdw1 disk index before get_sd_name = 2 [ 28.488245] device-name= sata_mv [ 28.491497] fvdw2 disk index after get_sd_name = 2 [ 28.496269] fvdw3 prefix[0]=s prefix[1]=d [ 28.500371] fvdw4 diskname = sdc [ 28.504548] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 28.512226] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 28.519336] sd 2:0:0:0: [sdc] Write Protect is off [ 28.524163] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 28.524456] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.581565] sdc: sdc4 < sdc5 sdc6 sdc7 sdc8 > [ 28.590384] sd 2:0:0:0: [sdc] Attached SCSI disk [ 28.749477] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 28.755998] rtc-rs5c372 0-0032: can't read registers [ 28.760997] rtc-rs5c372: probe of 0-0032 failed with error -5 [ 28.768401] at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write [ 29.019498] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 29.059538] ata4.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 29.065707] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 29.129547] ata4.00: configured for UDMA/133 [ 29.134315] scsi 3:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 [ 29.143382] fvdw1 disk index before get_sd_name = 3 [ 29.148253] device-name= sata_mv [ 29.151506] fvdw2 disk index after get_sd_name = 1 [ 29.156278] fvdw3 prefix[0]=s prefix[1]=d [ 29.160381] fvdw4 diskname = sdb [ 29.164568] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 29.172243] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 29.179344] sd 3:0:0:0: [sdb] Write Protect is off [ 29.184171] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 29.184465] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.236246] sdb: sdb4 < sdb5 sdb6 sdb7 sdb8 > [ 29.245100] sd 3:0:0:0: [sdb] Attached SCSI disk [ 29.679497] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 29.719537] ata5.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133 [ 29.725707] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 29.789552] ata5.00: configured for UDMA/133 [ 29.794304] scsi 4:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5 [ 29.803404] fvdw1 disk index before get_sd_name = 4 [ 29.808272] device-name= sata_mv [ 29.811524] fvdw2 disk index after get_sd_name = 0 [ 29.816297] fvdw3 prefix[0]=s prefix[1]=d [ 29.820400] fvdw4 diskname = sda [ 29.824599] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 29.832271] sd 4:0:0:0: [sda] 4096-byte physical blocks [ 29.839369] sd 4:0:0:0: [sda] Write Protect is off [ 29.844200] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 29.844490] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.902245] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 29.913720] sd 4:0:0:0: [sda] Attached SCSI disk [ 30.179493] ata6: SATA link down (SStatus 0 SControl 300) [ 30.529490] ata7: SATA link down (SStatus 0 SControl 300) [ 30.769478] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 30.879491] ata8: SATA link down (SStatus 0 SControl 300) [ 31.949464] ata10: failed to resume link (SControl 0) [ 31.954516] ata10: SATA link down (SStatus 0 SControl 0) [ 32.769473] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 33.029463] ata11: failed to resume link (SControl 0) [ 33.034517] ata11: SATA link down (SStatus 0 SControl 0) [ 34.109464] ata12: failed to resume link (SControl 0) [ 34.114516] ata12: SATA link down (SStatus 0 SControl 0) [ 34.769476] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 35.189463] ata13: failed to resume link (SControl 0) [ 35.194517] ata13: SATA link down (SStatus 0 SControl 0) [ 36.769473] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 38.769477] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 38.776014] g762: probe of 0-003e failed with error -110 [ 40.779475] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 42.779472] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 44.779471] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 46.779471] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 48.779472] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 50.779473] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 52.779473] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 54.779472] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 56.779479] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 58.779475] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 60.779474] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 62.779474] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 62.789938] Netfilter messages via NETLINK v0.30. [ 62.795003] ipip: IPv4 over IPv4 tunneling driver [ 62.801190] TCP: cubic registered [ 62.804505] NET: Registered protocol family 17 [ 62.808965] NET: Registered protocol family 5 [ 62.815253] console [netcon0] enabled [ 62.818912] netconsole: network logging started [ 62.823471] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 63.024174] EXT3-fs (sda7): recovery required on readonly filesystem [ 63.030551] EXT3-fs (sda7): write access will be enabled during recovery [ 93.777089] ata5.00: exception Emask 0x0 SAct 0x7fff SErr 0x0 action 0x6 frozen [ 93.784409] ata5.00: failed command: READ FPDMA QUEUED [ 93.789583] ata5.00: cmd 60/08:00:f0:7d:52/00:00:00:00:00/40 tag 0 ncq 4096 in [ 93.789583] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.804148] ata5.00: status: { DRDY } [ 93.807810] ata5.00: failed command: READ FPDMA QUEUED [ 93.812986] ata5.00: cmd 60/08:08:f8:7d:52/00:00:00:00:00/40 tag 1 ncq 4096 in [ 93.812986] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.827554] ata5.00: status: { DRDY } [ 93.831231] ata5.00: failed command: READ FPDMA QUEUED [ 93.836393] ata5.00: cmd 60/08:10:00:7e:52/00:00:00:00:00/40 tag 2 ncq 4096 in [ 93.836393] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.850960] ata5.00: status: { DRDY } [ 93.854622] ata5.00: failed command: READ FPDMA QUEUED [ 93.859796] ata5.00: cmd 60/08:18:08:7e:52/00:00:00:00:00/40 tag 3 ncq 4096 in [ 93.859796] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.874365] ata5.00: status: { DRDY } [ 93.878027] ata5.00: failed command: READ FPDMA QUEUED [ 93.883203] ata5.00: cmd 60/08:20:10:7e:52/00:00:00:00:00/40 tag 4 ncq 4096 in [ 93.883203] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.897770] ata5.00: status: { DRDY } [ 93.901446] ata5.00: failed command: READ FPDMA QUEUED [ 93.906602] ata5.00: cmd 60/08:28:18:7e:52/00:00:00:00:00/40 tag 5 ncq 4096 in [ 93.906602] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.921168] ata5.00: status: { DRDY } [ 93.924829] ata5.00: failed command: READ FPDMA QUEUED [ 93.930005] ata5.00: cmd 60/08:30:20:7e:52/00:00:00:00:00/40 tag 6 ncq 4096 in [ 93.930005] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.944574] ata5.00: status: { DRDY } [ 93.948235] ata5.00: failed command: READ FPDMA QUEUED [ 93.953412] ata5.00: cmd 60/08:38:28:7e:52/00:00:00:00:00/40 tag 7 ncq 4096 in [ 93.953412] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.967980] ata5.00: status: { DRDY } [ 93.971654] ata5.00: failed command: READ FPDMA QUEUED [ 93.976811] ata5.00: cmd 60/08:40:30:7e:52/00:00:00:00:00/40 tag 8 ncq 4096 in [ 93.976811] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 93.991377] ata5.00: status: { DRDY } [ 93.995039] ata5.00: failed command: READ FPDMA QUEUED [ 94.000214] ata5.00: cmd 60/08:48:38:7e:52/00:00:00:00:00/40 tag 9 ncq 4096 in [ 94.000214] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 94.014782] ata5.00: status: { DRDY } [ 94.018444] ata5.00: failed command: READ FPDMA QUEUED [ 94.023623] ata5.00: cmd 60/08:50:40:7e:52/00:00:00:00:00/40 tag 10 ncq 4096 in [ 94.023623] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 94.038275] ata5.00: status: { DRDY } [ 94.041950] ata5.00: failed command: READ FPDMA QUEUED [ 94.047105] ata5.00: cmd 60/08:58:48:7e:52/00:00:00:00:00/40 tag 11 ncq 4096 in [ 94.047105] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 94.061758] ata5.00: status: { DRDY } [ 94.065421] ata5.00: failed command: READ FPDMA QUEUED [ 94.070596] ata5.00: cmd 60/08:60:50:7e:52/00:00:00:00:00/40 tag 12 ncq 4096 in [ 94.070596] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 94.085250] ata5.00: status: { DRDY } [ 94.088913] ata5.00: failed command: READ FPDMA QUEUED [ 94.094089] ata5.00: cmd 60/08:68:58:7e:52/00:00:00:00:00/40 tag 13 ncq 4096 in [ 94.094089] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 94.108743] ata5.00: status: { DRDY } [ 94.112416] ata5.00: failed command: READ FPDMA QUEUED [ 94.117573] ata5.00: cmd 60/08:70:60:7e:52/00:00:00:00:00/40 tag 14 ncq 4096 in [ 94.117573] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 94.132226] ata5.00: status: { DRDY } [ 94.135901] ata5: hard resetting link [ 94.649507] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 94.729562] ata5.00: configured for UDMA/133 [ 94.733838] ata5.00: device reported invalid CHS sector 0 [ 94.739228] ata5.00: device reported invalid CHS sector 0 [ 94.744642] ata5.00: device reported invalid CHS sector 0 [ 94.750044] ata5.00: device reported invalid CHS sector 0 [ 94.755435] ata5.00: device reported invalid CHS sector 0 [ 94.760851] ata5.00: device reported invalid CHS sector 0 [ 94.766245] ata5.00: device reported invalid CHS sector 0 [ 94.771654] ata5.00: device reported invalid CHS sector 0 [ 94.777044] ata5.00: device reported invalid CHS sector 0 [ 94.782455] ata5.00: device reported invalid CHS sector 0 [ 94.787843] ata5.00: device reported invalid CHS sector 0 [ 94.793254] ata5.00: device reported invalid CHS sector 0 [ 94.798644] ata5.00: device reported invalid CHS sector 0 [ 94.804053] ata5.00: device reported invalid CHS sector 0 [ 94.809445] ata5.00: device reported invalid CHS sector 0 [ 94.814889] ata5: EH complete [ 125.777068] ata5.00: exception Emask 0x0 SAct 0x3fffffff SErr 0x0 action 0x6 frozen [ 125.784732] ata5.00: failed command: READ FPDMA QUEUED [ 125.789914] ata5.00: cmd 60/08:00:80:7e:52/00:00:00:00:00/40 tag 0 ncq 4096 in [ 125.789914] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.804478] ata5.00: status: { DRDY } [ 125.808142] ata5.00: failed command: READ FPDMA QUEUED [ 125.813316] ata5.00: cmd 60/08:08:88:7e:52/00:00:00:00:00/40 tag 1 ncq 4096 in [ 125.813316] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.827892] ata5.00: status: { DRDY } [ 125.831568] ata5.00: failed command: READ FPDMA QUEUED [ 125.836724] ata5.00: cmd 60/08:10:90:7e:52/00:00:00:00:00/40 tag 2 ncq 4096 in [ 125.836724] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.851291] ata5.00: status: { DRDY } [ 125.854952] ata5.00: failed command: READ FPDMA QUEUED [ 125.860127] ata5.00: cmd 60/08:18:98:7e:52/00:00:00:00:00/40 tag 3 ncq 4096 in [ 125.860127] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.874696] ata5.00: status: { DRDY } [ 125.878357] ata5.00: failed command: READ FPDMA QUEUED [ 125.883533] ata5.00: cmd 60/08:20:a0:7e:52/00:00:00:00:00/40 tag 4 ncq 4096 in [ 125.883533] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.898101] ata5.00: status: { DRDY } [ 125.901777] ata5.00: failed command: READ FPDMA QUEUED [ 125.906932] ata5.00: cmd 60/08:28:a8:7e:52/00:00:00:00:00/40 tag 5 ncq 4096 in [ 125.906932] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.921499] ata5.00: status: { DRDY } [ 125.925161] ata5.00: failed command: READ FPDMA QUEUED [ 125.930337] ata5.00: cmd 60/08:30:b0:7e:52/00:00:00:00:00/40 tag 6 ncq 4096 in [ 125.930337] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.944906] ata5.00: status: { DRDY } [ 125.948567] ata5.00: failed command: READ FPDMA QUEUED [ 125.953743] ata5.00: cmd 60/08:38:b8:7e:52/00:00:00:00:00/40 tag 7 ncq 4096 in [ 125.953743] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.968311] ata5.00: status: { DRDY } [ 125.971985] ata5.00: failed command: READ FPDMA QUEUED [ 125.977142] ata5.00: cmd 60/08:40:c0:7e:52/00:00:00:00:00/40 tag 8 ncq 4096 in [ 125.977142] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 125.991707] ata5.00: status: { DRDY } [ 125.995370] ata5.00: failed command: READ FPDMA QUEUED [ 126.000546] ata5.00: cmd 60/08:48:c8:7e:52/00:00:00:00:00/40 tag 9 ncq 4096 in [ 126.000546] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.015114] ata5.00: status: { DRDY } [ 126.018776] ata5.00: failed command: READ FPDMA QUEUED [ 126.023951] ata5.00: cmd 60/08:50:d0:7e:52/00:00:00:00:00/40 tag 10 ncq 4096 in [ 126.023951] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.038606] ata5.00: status: { DRDY } [ 126.042279] ata5.00: failed command: READ FPDMA QUEUED [ 126.047436] ata5.00: cmd 60/08:58:d8:7e:52/00:00:00:00:00/40 tag 11 ncq 4096 in [ 126.047436] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.062089] ata5.00: status: { DRDY } [ 126.065751] ata5.00: failed command: READ FPDMA QUEUED [ 126.070926] ata5.00: cmd 60/08:60:e0:7e:52/00:00:00:00:00/40 tag 12 ncq 4096 in [ 126.070926] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.085582] ata5.00: status: { DRDY } [ 126.089243] ata5.00: failed command: READ FPDMA QUEUED [ 126.094418] ata5.00: cmd 60/08:68:e8:7e:52/00:00:00:00:00/40 tag 13 ncq 4096 in [ 126.094418] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.109073] ata5.00: status: { DRDY } [ 126.112748] ata5.00: failed command: READ FPDMA QUEUED [ 126.117904] ata5.00: cmd 60/08:70:f0:7e:52/00:00:00:00:00/40 tag 14 ncq 4096 in [ 126.117904] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.132556] ata5.00: status: { DRDY } [ 126.136219] ata5.00: failed command: READ FPDMA QUEUED [ 126.141393] ata5.00: cmd 60/08:78:f8:7e:52/00:00:00:00:00/40 tag 15 ncq 4096 in [ 126.141393] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.156049] ata5.00: status: { DRDY } [ 126.159725] ata5.00: failed command: READ FPDMA QUEUED [ 126.164880] ata5.00: cmd 60/08:80:00:7f:52/00:00:00:00:00/40 tag 16 ncq 4096 in [ 126.164880] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.179533] ata5.00: status: { DRDY } [ 126.183195] ata5.00: failed command: READ FPDMA QUEUED [ 126.188354] ata5.00: cmd 60/08:88:08:7f:52/00:00:00:00:00/40 tag 17 ncq 4096 in [ 126.188354] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.203008] ata5.00: status: { DRDY } [ 126.206670] ata5.00: failed command: READ FPDMA QUEUED [ 126.211845] ata5.00: cmd 60/08:90:10:7f:52/00:00:00:00:00/40 tag 18 ncq 4096 in [ 126.211845] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.226499] ata5.00: status: { DRDY } [ 126.230176] ata5.00: failed command: READ FPDMA QUEUED [ 126.235339] ata5.00: cmd 60/08:98:18:7f:52/00:00:00:00:00/40 tag 19 ncq 4096 in [ 126.235339] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.249991] ata5.00: status: { DRDY } [ 126.253653] ata5.00: failed command: READ FPDMA QUEUED [ 126.258815] ata5.00: cmd 60/08:a0:20:7f:52/00:00:00:00:00/40 tag 20 ncq 4096 in [ 126.258815] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.273467] ata5.00: status: { DRDY } [ 126.277129] ata5.00: failed command: READ FPDMA QUEUED [ 126.282307] ata5.00: cmd 60/08:a8:28:7f:52/00:00:00:00:00/40 tag 21 ncq 4096 in [ 126.282307] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.296959] ata5.00: status: { DRDY } [ 126.300636] ata5.00: failed command: READ FPDMA QUEUED [ 126.305798] ata5.00: cmd 60/08:b0:30:7f:52/00:00:00:00:00/40 tag 22 ncq 4096 in [ 126.305798] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.320450] ata5.00: status: { DRDY } [ 126.324113] ata5.00: failed command: READ FPDMA QUEUED [ 126.329273] ata5.00: cmd 60/08:b8:38:7f:52/00:00:00:00:00/40 tag 23 ncq 4096 in [ 126.329273] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.343926] ata5.00: status: { DRDY } [ 126.347588] ata5.00: failed command: READ FPDMA QUEUED [ 126.352763] ata5.00: cmd 60/08:c0:40:7f:52/00:00:00:00:00/40 tag 24 ncq 4096 in [ 126.352763] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.367417] ata5.00: status: { DRDY } [ 126.371095] ata5.00: failed command: READ FPDMA QUEUED [ 126.376257] ata5.00: cmd 60/08:c8:48:7f:52/00:00:00:00:00/40 tag 25 ncq 4096 in [ 126.376257] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.390910] ata5.00: status: { DRDY } [ 126.394572] ata5.00: failed command: READ FPDMA QUEUED [ 126.399746] ata5.00: cmd 60/08:d0:50:7f:52/00:00:00:00:00/40 tag 26 ncq 4096 in [ 126.399746] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.414403] ata5.00: status: { DRDY } [ 126.418065] ata5.00: failed command: READ FPDMA QUEUED [ 126.423239] ata5.00: cmd 60/08:d8:58:7f:52/00:00:00:00:00/40 tag 27 ncq 4096 in [ 126.423239] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.437895] ata5.00: status: { DRDY } [ 126.441569] ata5.00: failed command: READ FPDMA QUEUED [ 126.446725] ata5.00: cmd 60/08:e0:60:7f:52/00:00:00:00:00/40 tag 28 ncq 4096 in [ 126.446725] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.461378] ata5.00: status: { DRDY } [ 126.465040] ata5.00: failed command: READ FPDMA QUEUED [ 126.470215] ata5.00: cmd 60/08:e8:68:7f:52/00:00:00:00:00/40 tag 29 ncq 4096 in [ 126.470215] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 126.484871] ata5.00: status: { DRDY } [ 126.488541] ata5: hard resetting link [ 126.999518] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 127.079570] ata5.00: configured for UDMA/133 [ 127.083847] ata5.00: device reported invalid CHS sector 0 [ 127.089237] ata5.00: device reported invalid CHS sector 0 [ 127.094652] ata5.00: device reported invalid CHS sector 0 [ 127.100061] ata5.00: device reported invalid CHS sector 0 [ 127.105454] ata5.00: device reported invalid CHS sector 0 [ 127.110861] ata5.00: device reported invalid CHS sector 0 [ 127.116253] ata5.00: device reported invalid CHS sector 0 [ 127.121662] ata5.00: device reported invalid CHS sector 0 [ 127.127053] ata5.00: device reported invalid CHS sector 0 [ 127.132462] ata5.00: device reported invalid CHS sector 0 [ 127.137853] ata5.00: device reported invalid CHS sector 0 [ 127.143262] ata5.00: device reported invalid CHS sector 0 [ 127.148654] ata5.00: device reported invalid CHS sector 0 [ 127.154062] ata5.00: device reported invalid CHS sector 0 [ 127.159453] ata5.00: device reported invalid CHS sector 0 [ 127.164861] ata5.00: device reported invalid CHS sector 0 [ 127.170270] ata5.00: device reported invalid CHS sector 0 [ 127.175662] ata5.00: device reported invalid CHS sector 0 [ 127.181071] ata5.00: device reported invalid CHS sector 0 [ 127.186461] ata5.00: device reported invalid CHS sector 0 [ 127.191870] ata5.00: device reported invalid CHS sector 0 [ 127.197262] ata5.00: device reported invalid CHS sector 0 [ 127.202670] ata5.00: device reported invalid CHS sector 0 [ 127.208061] ata5.00: device reported invalid CHS sector 0 [ 127.213469] ata5.00: device reported invalid CHS sector 0 [ 127.218861] ata5.00: device reported invalid CHS sector 0 [ 127.224270] ata5.00: device reported invalid CHS sector 0 [ 127.229680] ata5.00: device reported invalid CHS sector 0 [ 127.235071] ata5.00: device reported invalid CHS sector 0 [ 127.240478] ata5.00: device reported invalid CHS sector 0 [ 127.245940] ata5: EH complete [ 127.289576] ata5.00: exception Emask 0x100 SAct 0xc3c SErr 0x400000 action 0x6 frozen [ 127.297390] ata5.00: edma_err_cause=04000080 pp_flags=00000003, EDMA self-disable [ 127.304882] ata5: SError: { Handshk } [ 127.308548] ata5.00: failed command: WRITE FPDMA QUEUED [ 127.313812] ata5.00: cmd 61/08:10:58:5f:52/00:00:00:00:00/40 tag 2 ncq 4096 out [ 127.313812] res 40/00:58:f0:5e:56/84:50:00:00:00/40 Emask 0x100 (unknown error) [ 127.329154] ata5.00: status: { DRDY } [ 127.332828] ata5.00: failed command: WRITE FPDMA QUEUED [ 127.338072] ata5.00: cmd 61/18:18:20:62:52/00:00:00:00:00/40 tag 3 ncq 12288 out [ 127.338072] res 41/84:58:f0:5e:56/84:50:00:00:00/40 Emask 0x10 (ATA bus error) [ 127.353414] ata5.00: status: { DRDY ERR } [ 127.357418] ata5.00: error: { ICRC ABRT } [ 127.361437] ata5.00: failed command: WRITE FPDMA QUEUED [ 127.366680] ata5.00: cmd 61/08:20:d8:62:52/00:00:00:00:00/40 tag 4 ncq 4096 out [ 127.366680] res 41/84:58:f0:5e:56/84:50:00:00:00/40 Emask 0x10 (ATA bus error) [ 127.381935] ata5.00: status: { DRDY ERR } [ 127.385939] ata5.00: error: { ICRC ABRT } [ 127.389956] ata5.00: failed command: WRITE FPDMA QUEUED [ 127.395200] ata5.00: cmd 61/08:28:20:63:52/00:00:00:00:00/40 tag 5 ncq 4096 out [ 127.395200] res 41/84:58:f0:5e:56/84:50:00:00:00/40 Emask 0x10 (ATA bus error) [ 127.410456] ata5.00: status: { DRDY ERR } [ 127.414460] ata5.00: error: { ICRC ABRT } [ 127.418465] ata5.00: failed command: WRITE FPDMA QUEUED [ 127.423727] ata5.00: cmd 61/08:50:58:5e:56/00:00:00:00:00/40 tag 10 ncq 4096 out [ 127.423727] res 41/84:58:f0:5e:56/84:50:00:00:00/40 Emask 0x10 (ATA bus error) [ 127.439072] ata5.00: status: { DRDY ERR } [ 127.443088] ata5.00: error: { ICRC ABRT } [ 127.447097] ata5.00: failed command: WRITE FPDMA QUEUED [ 127.452360] ata5.00: cmd 61/08:58:f0:5e:56/00:00:00:00:00/40 tag 11 ncq 4096 out [ 127.452360] res 41/84:58:f0:5e:56/84:50:00:00:00/40 Emask 0x10 (ATA bus error) [ 127.467705] ata5.00: status: { DRDY ERR } [ 127.471721] ata5.00: error: { ICRC ABRT } [ 127.475743] ata5: hard resetting link [ 127.989514] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 128.089569] ata5.00: configured for UDMA/133 [ 128.093889] ata5: EH complete [ 128.279744] kjournald starting. Commit interval 5 seconds [ 128.320023] EXT3-fs (sda7): recovery complete [ 128.324373] EXT3-fs (sda7): mounted filesystem with ordered data mode [ 128.330861] VFS: Mounted root (ext3 filesystem) readonly on device 8:71. [ 128.338435] Freeing unused kernel memory: 112K (c039b000 - c03b7000) [ 158.967076] ata5: limiting SATA link speed to 1.5 Gbps [ 158.972245] ata5.00: exception Emask 0x0 SAct 0x1f SErr 0x0 action 0x6 frozen [ 158.979368] ata5.00: failed command: READ FPDMA QUEUED [ 158.984543] ata5.00: cmd 60/40:00:30:a5:53/00:00:00:00:00/40 tag 0 ncq 32768 in [ 158.984543] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 158.999195] ata5.00: status: { DRDY } [ 159.002869] ata5.00: failed command: READ FPDMA QUEUED [ 159.008027] ata5.00: cmd 60/c0:08:10:1f:5a/00:00:00:00:00/40 tag 1 ncq 98304 in [ 159.008027] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.022677] ata5.00: status: { DRDY } [ 159.026341] ata5.00: failed command: READ FPDMA QUEUED [ 159.031516] ata5.00: cmd 60/00:10:a0:96:53/01:00:00:00:00/40 tag 2 ncq 131072 in [ 159.031516] res 40/00:58:f0:5e:56/84:50:00:00:00/40 Emask 0x4 (timeout) [ 159.046257] ata5.00: status: { DRDY } [ 159.049933] ata5.00: failed command: READ FPDMA QUEUED [ 159.055098] ata5.00: cmd 60/c0:18:78:a5:53/00:00:00:00:00/40 tag 3 ncq 98304 in [ 159.055098] res 40/00:58:f0:5e:56/84:50:00:00:00/40 Emask 0x4 (timeout) [ 159.069749] ata5.00: status: { DRDY } [ 159.073411] ata5.00: failed command: READ FPDMA QUEUED [ 159.078573] ata5.00: cmd 60/00:20:a8:9b:53/01:00:00:00:00/40 tag 4 ncq 131072 in [ 159.078573] res 40/00:58:f0:5e:56/84:50:00:00:00/40 Emask 0x4 (timeout) [ 159.093310] ata5.00: status: { DRDY } [ 159.096988] ata5: hard resetting link [ 159.609522] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 159.689577] ata5.00: configured for UDMA/133 [ 159.693861] ata5.00: device reported invalid CHS sector 0 [ 159.699253] ata5.00: device reported invalid CHS sector 0 [ 159.704716] ata5: EH complete [ 159.897837] EXT3-fs (sda7): using internal journal [ 160.357353] random: nonblocking pool is initialized [ 161.479730] kjournald starting. Commit interval 5 seconds [ 161.485693] EXT3-fs (sda1): using internal journal [ 161.539608] EXT3-fs (sda1): recovery complete [ 161.543963] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 163.489728] kjournald starting. Commit interval 5 seconds [ 163.495260] EXT3-fs (sda5): warning: checktime reached, running e2fsck is recommended [ 163.503569] EXT3-fs (sda5): using internal journal [ 163.579605] EXT3-fs (sda5): recovery complete [ 163.583963] EXT3-fs (sda5): mounted filesystem with ordered data mode [ 163.751296] Adding 514076k swap on /dev/sda3. Priority:-1 extents:1 across:514076k [ 165.643302] NTFS driver 2.1.30 [Flags: R/W MODULE]. [ 165.679413] fuse init (API version 7.22) [ 165.711383] usbcore: registered new interface driver usblp [ 165.758681] RPC: Registered named UNIX socket transport module. [ 165.764628] RPC: Registered udp transport module. [ 165.769317] RPC: Registered tcp transport module. [ 165.774023] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 165.854073] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 165.928978] Loading iSCSI transport class v2.0-870. [ 165.945318] iscsi: registered transport (tcp) [ 165.983899] Linux video capture interface: v2.00 [ 166.091792] uvcvideo: Unable to create debugfs directory [ 166.097294] usbcore: registered new interface driver uvcvideo [ 166.103057] USB Video Class driver (1.1.1) [ 166.145379] md: raid0 personality registered for level 0 [ 166.180096] md: raid1 personality registered for level 1 [ 166.381219] raid6: int32x1 24 MB/s [ 166.550817] raid6: int32x2 37 MB/s [ 166.720337] raid6: int32x4 46 MB/s [ 166.890159] raid6: int32x8 57 MB/s [ 166.893900] raid6: using algorithm int32x8 (57 MB/s) [ 166.898850] raid6: using intx1 recovery algorithm [ 166.908494] async_tx: api initialized (async) [ 166.915094] xor: measuring software checksum speed [ 167.019487] arm4regs : 429.600 MB/sec [ 167.119476] 8regs : 337.600 MB/sec [ 167.219483] 32regs : 498.000 MB/sec [ 167.223656] xor: using function: 32regs (498.000 MB/sec) [ 167.248502] md: raid6 personality registered for level 6 [ 167.253845] md: raid5 personality registered for level 5 [ 167.259139] md: raid4 personality registered for level 4 [ 167.294863] md: raid10 personality registered for level 10 [ 179.919635] md: bind<sdc8> [ 179.923009] md: bind<sdd8> [ 179.926354] md: bind<sde8> [ 210.117074] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 210.124140] ata4.00: failed command: READ FPDMA QUEUED [ 210.129302] ata4.00: cmd 60/08:00:18:1a:70/00:00:74:00:00/40 tag 0 ncq 4096 in [ 210.129302] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 210.143866] ata4.00: status: { DRDY } [ 210.147545] ata4: hard resetting link [ 210.659530] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 210.739587] ata4.00: configured for UDMA/133 [ 210.743869] ata4.00: device reported invalid CHS sector 0 [ 210.749276] ata4: EH complete [ 210.770840] md: bind<sdb8> [ 210.773884] md: kicking non-fresh sdc8 from array! [ 210.778682] md: unbind<sdc8> [ 210.781647] md: export_rdev(sdc8) [ 210.796352] md/raid:md0: device sdb8 operational as raid disk 0 [ 210.802300] md/raid:md0: device sde8 operational as raid disk 3 [ 210.808206] md/raid:md0: device sdd8 operational as raid disk 2 [ 210.816597] md/raid:md0: allocated 0kB [ 210.820514] md/raid:md0: raid level 5 active with 3 out of 4 devices, algorithm 2 [ 210.827970] RAID conf printout: [ 210.827988] --- level:5 rd:4 wd:3 [ 210.828008] disk 0, o:1, dev:sdb8 [ 210.828028] disk 2, o:1, dev:sdd8 [ 210.828047] disk 3, o:1, dev:sde8 [ 210.828358] md0: detected capacity change from 0 to 2990514044928 [ 210.857060] md0: unknown partition table [ 221.748218] ata2.00: exception Emask 0x10 SAct 0x1 SErr 0x1000000 action 0x6 frozen [ 221.755897] ata2.00: edma_err_cause=00000020 pp_flags=00000003, SError=01000000 [ 221.763206] ata2: SError: { TrStaTrns } [ 221.767042] ata2.00: failed command: READ FPDMA QUEUED [ 221.772220] ata2.00: cmd 60/80:00:98:03:64/00:00:00:00:00/40 tag 0 ncq 65536 in [ 221.772220] res 40/00:00:98:03:64/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 221.787476] ata2.00: status: { DRDY } [ 221.791166] ata2: hard resetting link [ 222.299538] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 222.379589] ata2.00: configured for UDMA/133 [ 222.383892] ata2: EH complete [ 252.187097] ata4.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen [ 252.194162] ata4.00: failed command: READ FPDMA QUEUED [ 252.199328] ata4.00: cmd 60/00:00:98:03:64/01:00:00:00:00/40 tag 0 ncq 131072 in [ 252.199328] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 252.214065] ata4.00: status: { DRDY } [ 252.217726] ata4.00: failed command: READ FPDMA QUEUED [ 252.222901] ata4.00: cmd 60/00:08:98:03:64/01:00:00:00:00/40 tag 1 ncq 131072 in [ 252.222901] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 252.237643] ata4.00: status: { DRDY } [ 252.241332] ata4: hard resetting link [ 252.749543] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 252.829596] ata4.00: configured for UDMA/133 [ 252.833910] ata4.00: device reported invalid CHS sector 0 [ 252.839314] ata4: EH complete [ 283.237095] ata4.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen [ 283.244152] ata4.00: failed command: READ FPDMA QUEUED [ 283.249311] ata4.00: cmd 60/00:08:98:03:64/01:00:00:00:00/40 tag 1 ncq 131072 in [ 283.249311] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 283.264048] ata4.00: status: { DRDY } [ 283.267725] ata4: hard resetting link [ 283.779544] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 283.859602] ata4.00: configured for UDMA/133 [ 283.863887] ata4.00: device reported invalid CHS sector 0 [ 283.869294] ata4: EH complete [ 284.489747] kjournald starting. Commit interval 5 seconds [ 284.498870] EXT3-fs (sda8): warning: checktime reached, running e2fsck is recommended [ 284.509706] EXT3-fs (sda8): using internal journal [ 284.589634] EXT3-fs (sda8): recovery complete [ 284.593988] EXT3-fs (sda8): mounted filesystem with ordered data mode [ 316.177099] ata4.00: NCQ disabled due to excessive errors [ 316.182521] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 316.189572] ata4.00: failed command: READ FPDMA QUEUED [ 316.194736] ata4.00: cmd 60/08:00:78:05:64/00:00:00:00:00/40 tag 0 ncq 4096 in [ 316.194736] res 40/00:01:09:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 316.209300] ata4.00: status: { DRDY } [ 316.212992] ata4: hard resetting link [ 316.719552] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 316.799608] ata4.00: configured for UDMA/133 [ 316.803909] ata4: EH complete [ 347.177107] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 347.184171] ata2.00: failed command: READ FPDMA QUEUED [ 347.189338] ata2.00: cmd 60/08:00:80:05:64/00:00:00:00:00/40 tag 0 ncq 4096 in [ 347.189338] res 40/00:00:98:03:64/00:00:00:00:00/40 Emask 0x4 (timeout) [ 347.203901] ata2.00: status: { DRDY } [ 347.207578] ata2: hard resetting link [ 347.719557] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 347.799616] ata2.00: configured for UDMA/133 [ 347.803918] ata2: EH complete [ 348.209605] ata2.00: exception Emask 0x100 SAct 0x1 SErr 0x400000 action 0x6 frozen [ 348.217247] ata2.00: edma_err_cause=04000080 pp_flags=00000003, EDMA self-disable [ 348.224732] ata2: SError: { Handshk } [ 348.228398] ata2.00: failed command: WRITE FPDMA QUEUED [ 348.233662] ata2.00: cmd 61/08:00:30:0e:64/00:00:00:00:00/40 tag 0 ncq 4096 out [ 348.233662] res 40/00:00:30:0e:64/00:00:00:00:00/40 Emask 0x100 (unknown error) [ 348.249004] ata2.00: status: { DRDY } [ 348.252696] ata2: hard resetting link [ 348.759558] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 348.839615] ata2.00: configured for UDMA/133 [ 348.843912] ata2: EH complete [ 348.969820] kjournald starting. Commit interval 5 seconds [ 348.995210] EXT3-fs (md0): using internal journal [ 349.069700] EXT3-fs (md0): recovery complete [ 349.073972] EXT3-fs (md0): mounted filesystem with ordered data mode [ 349.173509] udevd (1044): /proc/1044/oom_adj is deprecated, please use /proc/1044/oom_score_adj instead. [ 349.183067] udev: starting version 130 [ 349.333329] ata1.00: exception Emask 0x100 SAct 0x1 SErr 0x400000 action 0x6 frozen [ 349.340992] ata1.00: edma_err_cause=04000080 pp_flags=00000003, EDMA self-disable [ 349.348461] ata1: SError: { Handshk } [ 349.352146] ata1.00: failed command: WRITE FPDMA QUEUED [ 349.357399] ata1.00: cmd 61/08:00:18:1a:70/00:00:74:00:00/40 tag 0 ncq 4096 out [ 349.357399] res 40/00:00:18:1a:70/00:00:74:00:00/40 Emask 0x100 (unknown error) [ 349.372740] ata1.00: status: { DRDY } [ 349.376417] ata1: hard resetting link [ 349.889625] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 349.979909] ata1.00: configured for UDMA/133 [ 349.984218] ata1: EH complete [ 349.994673] ata1.00: exception Emask 0x100 SAct 0x1 SErr 0x400000 action 0x6 frozen [ 350.002355] ata1.00: edma_err_cause=04000080 pp_flags=00000003, EDMA self-disable [ 350.009833] ata1: SError: { Handshk } [ 350.013499] ata1.00: failed command: WRITE FPDMA QUEUED [ 350.018747] ata1.00: cmd 61/08:00:18:1a:70/00:00:74:00:00/40 tag 0 ncq 4096 out [ 350.018747] res 40/00:00:18:1a:70/84:00:74:00:00/40 Emask 0x100 (unknown error) [ 350.034089] ata1.00: status: { DRDY } [ 350.037766] ata1: hard resetting link [ 350.789819] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 350.869728] ata1.00: configured for UDMA/133 [ 350.874030] ata1: EH complete [ 353.040267] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 356.133580] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 385.417112] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 385.424173] ata2.00: failed command: WRITE FPDMA QUEUED [ 385.429425] ata2.00: cmd 61/08:00:18:1a:70/00:00:74:00:00/40 tag 0 ncq 4096 out [ 385.429425] res 40/00:00:30:0e:64/00:00:00:00:00/40 Emask 0x4 (timeout) [ 385.444076] ata2.00: status: { DRDY } [ 385.447751] ata2: hard resetting link [ 385.959573] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 386.039635] ata2.00: configured for UDMA/133 [ 386.043937] ata2: EH complete [ 386.126310] ata1.00: exception Emask 0x100 SAct 0x1 SErr 0x400000 action 0x6 frozen [ 386.133982] ata1.00: edma_err_cause=04000080 pp_flags=00000003, EDMA self-disable [ 386.141470] ata1: SError: { Handshk } [ 386.145133] ata1.00: failed command: WRITE FPDMA QUEUED [ 386.150397] ata1.00: cmd 61/08:00:18:1a:70/00:00:74:00:00/40 tag 0 ncq 4096 out [ 386.150397] res 40/00:00:18:1a:70/00:ff:74:00:00/40 Emask 0x100 (unknown error) [ 386.165740] ata1.00: status: { DRDY } [ 386.169417] ata1: hard resetting link [ 386.173739] ata2: limiting SATA link speed to 1.5 Gbps [ 386.178876] ata2.00: exception Emask 0x100 SAct 0x1 SErr 0x400000 action 0x6 frozen [ 386.186540] ata2.00: edma_err_cause=04000080 pp_flags=00000003, EDMA self-disable [ 386.194032] ata2: SError: { Handshk } [ 386.197697] ata2.00: failed command: WRITE FPDMA QUEUED [ 386.202963] ata2.00: cmd 61/08:00:18:1a:70/00:00:74:00:00/40 tag 0 ncq 4096 out [ 386.202963] res 41/84:00:18:1a:70/84:ff:74:00:00/40 Emask 0x10 (ATA bus error) [ 386.218217] ata2.00: status: { DRDY ERR } [ 386.222235] ata2.00: error: { ICRC ABRT } [ 386.226258] ata2: hard resetting link [ 386.769584] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 386.779578] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 386.850447] ata2.00: configured for UDMA/133 [ 386.854749] ata2: EH complete [ 386.879656] ata1.00: configured for UDMA/133 [ 386.883960] ata1: EH complete [ 424.587210] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 424.594272] ata4.00: failed command: READ DMA [ 424.598656] ata4.00: cmd c8/00:00:98:05:64/00:00:00:00:00/e0 tag 0 dma 131072 in [ 424.598656] res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [ 424.613432] ata4.00: status: { DRDY } [ 424.617114] ata4: hard resetting link [ 425.129578] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 425.209634] ata4.00: configured for UDMA/133 [ 425.213919] ata4.00: device reported invalid CHS sector 0 [ 425.219323] ata4: EH complete [ 429.597173] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 429.604295] ata3.00: failed command: READ FPDMA QUEUED [ 429.609460] ata3.00: cmd 60/00:00:98:05:64/01:00:00:00:00/40 tag 0 ncq 131072 in [ 429.609460] res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [ 429.624203] ata3.00: status: { DRDY } [ 429.627883] ata3: hard resetting link [ 430.139628] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 430.219744] ata3.00: configured for UDMA/133 [ 430.224033] ata3.00: device reported invalid CHS sector 0 [ 430.229448] ata3: EH complete [ 460.747140] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 460.754197] ata3.00: failed command: READ FPDMA QUEUED [ 460.759354] ata3.00: cmd 60/00:00:98:05:64/01:00:00:00:00/40 tag 0 ncq 131072 in [ 460.759354] res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [ 460.774091] ata3.00: status: { DRDY } [ 460.777769] ata3: hard resetting link [ 461.289593] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 461.369638] ata3.00: configured for UDMA/133 [ 461.373918] ata3.00: device reported invalid CHS sector 0 [ 461.379323] ata3: EH complete root@fvdwsl-base:/ #

Code: Select all: root@fvdwsl-base:/ # ls -l /direct-usb lrwxrwxrwx 1 root root 11 2011-11-16 12:03 /direct-usb -> /share/1000 root@fvdwsl-base:/ # cat /etc/nas_conf_db.xml|grep 'addonsvolume' <addonsvolume>1000</addonsvolume>

Code: Select all: root@fvdwsl-base:/ # mdadm --detail /dev/md0 /dev/md0: Version : 00.90.03 Creation Time : Wed Nov 16 13:22:21 2011 Raid Level : raid5 Array Size : 2920423872 (2785.13 GiB 2990.51 GB) Device Size : 973474624 (928.38 GiB 996.84 GB) Raid Devices : 4 Total Devices : 3 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Wed Nov 16 12:03:44 2011 State : clean, degraded Active Devices : 3 Working Devices : 3 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 64K UUID : fa58a2b1:a56fc1c1:2a5b9325:5626151a Events : 0.89 Number Major Minor RaidDevice State 0 8 56 0 active sync /dev/sdb8 1 0 0 1 removed 2 8 24 2 active sync /dev/sdd8 3 8 8 3 active sync /dev/sde8 root@fvdwsl-base:/ #

by **Jocko** » Wed Sep 23, 2015 10:42 am

It is lunch time now
see later

you have an issue with sda7

by **Jocko** » Wed Sep 23, 2015 11:51 am

Well it seems that you have a corrupted fs on sda7 (many errors reported in demsg)

We go to rewrite it by using fvdw-sl console.
- before stopping the nas, get information about the chrooted partition (step A)

Code: Select all: ls -l /lacie-boot

(you must see either sda1boot or sda2boot)
- stop the nas and unplug sd[bcde] disks
- Get a telnet access by loading a standalone kernel (UIMAGE-26394-5BIG1-42standalone)
In telnet, do
- load the firmware image

Code: Select all: mkdir /sda5 mount /dev/sda5 /sda5 busybox tftp -r firmware/xfvdw-sl-16-0-nwsp2-11apr2015.img -l /sda5/tmp/firmware.img -g ipPC dd if=/sda5/tmp/firmware.img of=/dev/sda7

(ipPc is the Ip of your laptop)
Note: if there are some errors at this step please to report it
- restore the chrooting

Code: Select all: touch /lacie-boot/sda?boot

(use sda1boot or sda2boot in accordance with the step A)

-Stop the nas, plug again sd[bcde] and restart

Post the dmesg output and the raid status

by **b1gnas** » Wed Sep 23, 2015 12:17 pm

Code: Select all: root@fvdwsl-base:/ # ls -l /lacie-boot total 0 -rw-r--r-- 1 root root 0 2015-09-22 14:25 sda1boot

Code: Select all: root@(none):/ # mkdir /sda5 root@(none):/ # mount /dev/sda5 /sda5 root@(none):/ # busybox tftp -r firmware/xfvdw-sl-16-0-nwsp2-11apr2015.img -l /sda5/tmp/firmware.img -g 10.5.5.21 6 firmware/xfvdw-sl-16 7% |**** | 18695k 0:02:32 ETAtftp: read error root@(none):/ # busybox tftp -r firmware/xfvdw-sl-16-0-nwsp2-11apr2015.img -l /sda5/tmp/firmware.img -g 10.5.5.21 6 firmware/xfvdw-sl-16 100% |****************************************************************| 250M 0:00:00 ETA root@(none):/ # dd if=/sda5/tmp/firmware.img of=/dev/sda7 512000+0 records in 512000+0 records out 262144000 bytes (250.0MB) copied, 39.568785 seconds, 6.3MB/s root@(none):/ # touch /lacie-boot/sda1boot touch: /lacie-boot/sda1boot: No such file or directory root@(none):/ #

what's wrong?

by **Jocko** » Wed Sep 23, 2015 12:24 pm

Oups I forgot to mount sda7 :oops:

So do

Code: Select all: mkdir /sda7 mount /dev/sda7 /sda7 touch /sda7/lacie-boot/sda1boot

by **b1gnas** » Wed Sep 23, 2015 12:28 pm

Code: Select all: root@(none):/ # mkdir /sda7 root@(none):/ # mount /dev/sda7 /sda7 root@(none):/ # touch /sda7/lacie-boot/sda1boot touch: /sda7/lacie-boot/sda1boot: No such file or directory root@(none):/ #

by **Jocko** » Wed Sep 23, 2015 12:32 pm

Post the output

Code: Select all: ls -a /sda7

plugout.net

Error creating Raid 5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Re: Problems with raid5

Who is online