no keep the 500 GB diks with the firmware and kernel in slot 1
place the 2TB disk you have in slot 5 now in slot 2 and check if the kernel finds it, so leave the disk in slot 1 as it is
mkdir sda2
mount /dev/sda2 sda2
cp /share/1000/public/fvdw-sl-14-0/rcS /sda2/etc/init.d/
chmod 755 /sda2/etc/init.d/rcS
umount sda2
rmdir sda2
mkdir sda7
mount /dev/sda7 sda7
cp /share/1000/public/fvdw-sl-11-0/rcS /sda7/etc/init.d/
chmod 755 /sda7/etc/init.d/rcS
umount sda7
rmdir sda7
taetae wrote:kernel panic
slot 5 only 500gb and slot2 and slot3
slot 4 only 500gb (I give him the "boot" command in order not to make the countdown)
Waiting for LUMP (5)
no lump receive; continuing
Reset IDE:
Marvell Serial ATA Adapter
Found adapter at bus 1, device 7 ... Scanning channels
Device 0: OK
Model: WDC WD5000AADS-00S9B0 Firm: 01.00A01 Ser#: WD-WCAV90478832
Type: Hard Disk
Supports 48-bit addressing
Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)
** Device 1 not available
** Device 2 not available
** Device 3 not available
** Device 4 not available
Loading from IDE device 0, partition 6: Name: hda6
Type: U-Boot
Image Name: Linux-2.6.39.4
Created:
<snip>
Return to Lacie 5Big Network vs1
Users browsing this forum: No registered users and 10 guests