Hi! Some general question + Wifi USB Realtek RTL8191S

[Msa-lacie]

Hi, I'm new user, probably for my poor english, I don't comprend some things:

1 I have a lacie network space v2, ho I can identificate if is lite or normal?
2 I've downloaded your packages, firmware and console, and now?
3 how I do now? which option I'd to select on firmware console from action menu?
4 I want to add a wifi usb dongle, ho can add a module on your firmware?

Thanks

[fvdw]

Hi, I'm new user, probably for my poor english, I don't comprend some things:

1 I have a lacie network space v2, ho I can identificate if is lite or normal?
2 I've downloaded your packages, firmware and console, and now?
3 how I do now? which option I'd to select on firmware console from action menu?
4 I want to add a wifi usb dongle, ho can add a module on your firmware?

Thanks

ad 1. viewtopic.php?f=11&t=213
ad 2/3. there is a help menu in the fvdw-sl conole for the action install firmware
ad4 no standard support for wifi dongles is implemented yet (too many different ones each needs its specific so it depends form which one you want to use)

[Msa-lacie]

Thanks for the prompt support!

now I have this problem, (I have Network Space V2 Classic), after from telnet console, start the ncurses interface, some problem appair about the partition:

Code: Select all

WARNING: rereading partition table failed, kernel still uses old table: Device or resource busy

There was an error deleting the partitioning scheme on /dev/sda.
Installer will exit

the disk is on sda, it is 1gb, I don't know if my Lacie support or no GPI table, but, I receive same problem, with both options.

some suggestion?

thanks

[fvdw]

seems you are using the device , did you mount something before running the install script or did you run the installer script without removing the partition table ?
Try once more and just execute the installer script. Choose no GPT support, not needed for a 1TB disk

[Msa-lacie]

Ok thanks!

thw sda9 was mounted.. but now all is ok,

the web access work perfect. ;)


Now, I need to configure a wifi-dongle, is a Sitecom, WL-352 Wireless USB Micro Adapter 300N, based on chip Realtek RTL8191S.

I've found this informations about a debian module: https://wiki.debian.org/rtl819x

how you suggest to do?

seem this module is precompilated...

[fvdw]

I think that the linux 3.9.5 kernel that use supports this driver, I will need to compile some modules

[fvdw]

it is supported but enabling it requires a complete kernel recompile. Not a big issue but it must wait some time as I want to change the setup of my compiler.
The new firmware uses glibc-2.17. All future kernels, applications I will compile against this glib version.
I trust you will have some patience

[Msa-lacie]

Thanks, very fast you support!

I can wait, but, if you want, I can help to compile, some times use Linux, and many times I've compiled the kernel.

Ciao!

[fvdw]

check your pm box, I will sent you a kernel that should support your wireless usb dongle

Please test it and let us know if it works

[Msa-lacie]

Hi! many thanks,

I've see your message, (but, the replies are disabled?)

I had copied the image and rebooted, all works normaly, but, if I connect by ssh, I not have "lsusb" command to see the dongle.

this is the dmesg:

Code: Select all

root@fvdwsl-base:/ # dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.9.5 (root@fvdwsl-5big2.local) (gcc version 4.5.4 (GCC) ) #166 PREEMPT Tue Oct 1 20:42:28 GMT+1 2013
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: LaCie Network Space v2
[    0.000000] Ignoring unrecognised tag 0x41000403
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat c077f890, node_mem_map c07b9000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda7 ro reset=0 productType=ASTON_KW cap=gpt,lba64
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Memory: 256MB = 256MB total
[    0.000000] Memory: 251948k/251948k available, 10196k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07179a4   (7231 kB)
[    0.000000]       .init : 0xc0718000 - 0xc0745e7c   ( 184 kB)
[    0.000000]       .data : 0xc0746000 - 0xc0780020   ( 233 kB)
[    0.000000]        .bss : 0xc0780020 - 0xc07b8c34   ( 228 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:114
[    0.000000] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
[   10.024812] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[   10.064742] pid_max: default: 32768 minimum: 301
[   10.064919] Mount-cache hash table entries: 512
[   10.065718] CPU: Testing write buffer coherency: ok
[   10.066212] Setting up static identity map for 0xc056a670 - 0xc056a6ac
[   10.069980] xor: measuring software checksum speed
[   10.164744]    arm4regs  :   698.000 MB/sec
[   10.264713]    8regs     :   436.400 MB/sec
[   10.364710]    32regs    :   604.000 MB/sec
[   10.364731] xor: using function: arm4regs (698.000 MB/sec)
[   10.364753] pinctrl core: initialized pinctrl subsystem
[   10.365031] NET: Registered protocol family 16
[   10.366967] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[   10.370701] Register Driver 'dummy'
[   10.371315] Kirkwood: MV88F6281-A1, TCLK=166666667.
[   10.371345] Feroceon L2: Enabling L2
[   10.371395] Feroceon L2: Cache support initialised.
[   10.372768] mv_usb_init 1
[   10.372796] mv_usb_init 2 devnum = 0
[   10.372822] init function mv_usb_init finished
[   10.372834] initial MPP regs: 01112222 00003311 00551100 00000000 00000000 00000000 00000000
[   10.372878]   final MPP regs: 01112222 00003311 00551100 00000000 00000000 00000000 00000000
[   10.373127]  orion-ehci registered
[   10.403855] bio: create slab <bio-0> at 0
[   10.564825] raid6: int32x1     71 MB/s
[   10.735993] raid6: int32x2     98 MB/s
[   10.904988] raid6: int32x4     89 MB/s
[   11.074955] raid6: int32x8    103 MB/s
[   11.074969] raid6: using algorithm int32x8 (103 MB/s)
[   11.074980] raid6: using intx1 recovery algorithm
[   11.076149] SCSI subsystem initialized
[   11.076754] libata version 3.00 loaded.
[   11.077108] Register Driver 'Generic PHY'
[   11.077496] Register Driver 'usbfs'
[   11.077724] usbcore: registered new interface driver usbfs
[   11.077745] Register Driver 'hub'
[   11.077961] usbcore: registered new interface driver hub
[   11.078062] Register Driver 'usb'
[   11.078229] usbcore: registered new device driver usb
[   11.078603] Register Driver 'i2c-gpio'
[   11.081409] cfg80211: Calling CRDA to update world regulatory domain
[   11.082661] Switching to clocksource orion_clocksource
[   11.085560] NET: Registered protocol family 2
[   11.086243] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[   11.086326] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[   11.086372] TCP: Hash tables configured (established 2048 bind 2048)
[   11.086458] TCP: reno registered
[   11.086477] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   11.086510] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   11.086749] NET: Registered protocol family 1
[   11.087130] RPC: Registered named UNIX socket transport module.
[   11.087145] RPC: Registered udp transport module.
[   11.087156] RPC: Registered tcp transport module.
[   11.087166] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   11.087183] PCI: CLS 0 bytes, default 32
[   11.087465] NetWinder Floating Point Emulator V0.97 (double precision)
[   11.087483] Register Driver 'gpio-usb'
[   11.087639] gpio-usb gpio-usb: USB GPIO's initialized
[   11.088378] Register Driver 'alarmtimer'
[   11.213876] VFS: Disk quotas dquot_6.5.2
[   11.213950] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   11.214476] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.214845] NTFS driver 2.1.30 [Flags: R/W].
[   11.214900] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[   11.215110] fuse init (API version 7.21)
[   11.215939] JFS: nTxBlock = 1968, nTxLock = 15746
[   11.216989] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   11.217475] msgmni has been set to 492
[   11.218901] async_tx: api initialized (async)
[   11.219160] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   11.219178] io scheduler noop registered
[   11.219190] io scheduler deadline registered
[   11.219216] io scheduler cfq registered (default)
[   11.219241] Register Driver 'kirkwood-pinctrl'
[   11.219510] Register Driver 'mv_xor'
[   11.219577] mv_xor mv_xor.0: Marvell shared XOR driver
[   11.252775] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[   11.292771] mv_xor mv_xor.0: Marvell XOR: ( xor fill cpy )
[   11.293092] mv_xor mv_xor.1: Marvell shared XOR driver
[   11.332770] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[   11.372770] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
[   11.379933] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   11.380747] Register Driver 'serial8250'
[   11.401136] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[   11.958107] console [ttyS0] enabled
[   11.972503] brd: module loaded
[   11.981043] loop: module loaded
[   11.984553] Register Driver 'at24'
[   11.988219] Register Driver 'eeprom'
[   11.993044] Register Driver 'sd'
[   11.996532] Register Driver 'ahci'
[   12.000249] Register Driver 'sata_mv'
[   12.004218] Register Driver 'sata_mv'
[   12.008014] sata_mv sata_mv.0: version 1.28
[   12.008125] sata_mv sata_mv.0: cannot get optional clkdev
[   12.013800] sata_mv sata_mv.0: slots 32 ports 2
[   12.022233] scsi0 : sata_mv
[   12.025675] scsi1 : sata_mv
[   12.028930] ata1: SATA max UDMA/133 irq 21
[   12.033099] ata2: SATA max UDMA/133 irq 21
[   12.038602] Register Driver 'physmap-flash'
[   12.043212] Generic platform RAM MTD, (c) 2004 Simtec Electronics
[   12.049284] Register Driver 'mtd-ram'
[   12.053335] Register Driver 'm25p80'
[   12.057194] Register Driver 'gen_nand'
[   12.061182] Register Driver 'orion_nand'
[   12.065592] platform_driver_probe 5 retval= -19 code= 0
[   12.070885] Register Driver 'orion_spi'
[   12.075677] m25p80 spi0.0: mx25l4005a (512 Kbytes)
[   12.080695] Creating 2 MTD partitions on "spi_flash":
[   12.085838] 0x000000000000-0x00000007d000 : "u-boot"
[   12.092120] 0x00000007e000-0x00000007f000 : "u-boot-env"
[   12.099023] tun: Universal TUN/TAP device driver, 1.6
[   12.104186] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   12.110556] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   12.119061] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   12.127908] Register Driver 'mv643xx_eth'
[   12.132045] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   12.139065] libphy: mv643xx_eth smi: probed
[   12.143545] Register Driver 'mv643xx_eth_port'
[   12.150388] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:4b:91:5d:9f
[   12.159309] PPP generic driver version 2.4.2
[   12.164039] PPP Deflate Compression module registered
[   12.169082] PPP MPPE Compression module registered
[   12.174003] NET: Registered protocol family 24
[   12.178464] Register Driver 'rtl8192cu'
[   12.182595] usbcore: registered new interface driver rtl8192cu
[   12.188522] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[   12.196049] Register Driver 'pegasus'
[   12.199969] usbcore: registered new interface driver pegasus
[   12.205685] Register Driver 'ipheth'
[   12.209514] usbcore: registered new interface driver ipheth
[   12.216499] aoe: AoE v81 initialised.
[   12.220216] Register Driver 'rtc-ds1307'
[   12.224433] Register Driver 'rtc-mv'
[   12.228530] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[   12.234582] platform_driver_probe 5 retval= 0 code= 0
[   12.239700] i2c /dev entries driver
[   12.243484] Register Driver 'mv64xxx_i2c'
[   12.248642] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[   12.256224] Register Driver 'gpio-fan'
[   12.260283] Register Driver 'lm75'
[   12.264836] Register Driver 'lm77'
[   12.268904] md: linear personality registered for level -1
[   12.274485] md: raid0 personality registered for level 0
[   12.279774] md: raid1 personality registered for level 1
[   12.285149] md: raid10 personality registered for level 10
[   12.290618] md: raid6 personality registered for level 6
[   12.295947] md: raid5 personality registered for level 5
[   12.301236] md: raid4 personality registered for level 4
[   12.306802] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[   12.315457] device-mapper: multipath: version 1.5.1 loaded
[   12.320921] device-mapper: multipath round-robin: version 1.0.0 loaded
[   12.327486] device-mapper: multipath queue-length: version 0.1.0 loaded
[   12.334114] device-mapper: multipath service-time: version 0.2.0 loaded
[   12.340790] device-mapper: dm-log-userspace: version 1.1.0 loaded
[   12.346903] device-mapper: raid: Loading target version 1.4.2
[   12.352632] Register Driver 'mmcblk'
[   12.356486] Register Driver 'leds-gpio'
[   12.360457] leds-gpio leds-gpio: pins are not configured from the driver
[   12.367604] Register Driver 'leds-ns2'
[   12.371887] Register Driver 'leds-ns2l'
[   12.376039] Register Driver 'leds-netxbig'
[   12.380435] Register Driver 'mv_crypto'
[   12.385464] Register Driver 'hid-generic'
[   12.389810] Netfilter messages via NETLINK v0.30.
[   12.394729] nf_conntrack version 0.5.0 (3936 buckets, 15744 max)
[   12.401215] IPv4 over IPv4 tunneling driver
[   12.406588] ip_tables: (C) 2000-2006 Netfilter Core Team
[   12.411988] TCP: cubic registered
[   12.415471] NET: Registered protocol family 10
[   12.420954] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   12.426515] sit: IPv6 over IPv4 tunneling driver
[   12.432117] NET: Registered protocol family 17
[   12.436711] NET: Registered protocol family 5
[   12.441214] NET: Registered protocol family 37
[   12.445908] VFP support v0.3: not present
[   12.451227] console [netcon0] enabled
[   12.454966] netconsole: network logging started
[   12.459479] Register Driver 'gpio-keys'
[   12.463911] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   12.471081] rtc-mv rtc-mv: setting system clock to 2013-10-02 10:19:14 UTC (1380709154)
[   12.542742] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   12.582771] ata1.00: ATA-8: ST31000528AS, CC46, max UDMA/133
[   12.588418] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   12.652772] ata1.00: configured for UDMA/133
[   12.673132] scsi 0:0:0:0: Direct-Access     ATA      ST31000528AS     CC46 PQ: 0 ANSI: 5
[   12.681762] No LaCie disk map available
[   12.686268] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[   12.694876] sd 0:0:0:0: [sda] Write Protect is off
[   12.699662] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   12.699801] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   12.749948]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[   12.759057] sd 0:0:0:0: [sda] Attached SCSI disk
[   13.042731] ata2: SATA link down (SStatus 0 SControl F300)
[   13.062783] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[   13.072166] EXT3-fs (sda7): recovery required on readonly filesystem
[   13.078571] EXT3-fs (sda7): write access will be enabled during recovery
[   13.293003] kjournald starting.  Commit interval 5 seconds
[   13.313109] EXT3-fs (sda7): recovery complete
[   13.317458] EXT3-fs (sda7): mounted filesystem with ordered data mode
[   13.323939] VFS: Mounted root (ext3 filesystem) readonly on device 8:7.
[   13.331321] Freeing init memory: 180K
[   13.555388] EXT3-fs (sda7): warning: checktime reached, running e2fsck is recommended
[   13.563675] EXT3-fs (sda7): using internal journal
[   14.212999] kjournald starting.  Commit interval 5 seconds
[   14.218531] EXT3-fs (sda5): using internal journal
[   14.242802] EXT3-fs (sda5): recovery complete
[   14.247147] EXT3-fs (sda5): mounted filesystem with ordered data mode
[   14.338281] Adding 514076k swap on /dev/sda3.  Priority:-1 extents:1 across:514076k
[   42.877898] kjournald starting.  Commit interval 5 seconds
[   42.883518] EXT3-fs (sda8): using internal journal
[   42.942803] EXT3-fs (sda8): recovery complete
[   42.947146] EXT3-fs (sda8): mounted filesystem with ordered data mode
[   43.067518] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   44.996828] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
[   45.006601] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   47.962835] udevd (716): /proc/716/oom_adj is deprecated, please use /proc/716/oom_score_adj instead.


I not see nothing about usb.