Page 1 of 5
FVDW firmware "Case Install"
Posted:
Fri Oct 09, 2015 2:41 pmby musafirrlail
Heloo .
I had a little problem time I try install my friend D2N2 device. Telnet client always timed out , Maybe there is wrong with my step ?
http://i61.tinypic.com/9iwzua.pngThanks you very much ..
Re: FVDW firmware "Case Install"
Posted:
Fri Oct 09, 2015 3:48 pmby Jocko
Hi musafirrlail,
I assume that you follows the usual advices : not use wireless connections, disable your firewall, ...
What version did you use with the console: 5.3, 5.4 or 5.5?
Re: FVDW firmware "Case Install"
Posted:
Sat Oct 10, 2015 1:20 pmby musafirrlail
Hello Jocko
This is same step time I use to my D2N2 and successfully, I have done turn off firewall and only use LAN (Not Wifi)
http://i61.tinypic.com/62ra.pngAre you have any step ? Thanks
Re: FVDW firmware "Case Install"
Posted:
Sat Oct 10, 2015 1:44 pmby Jocko
Hi musafirrlail,
You should use fvdw-sl version 5.5: it has a better network settings management.
Re: FVDW firmware "Case Install"
Posted:
Sat Oct 10, 2015 1:49 pmby musafirrlail
Hi Jocko,
Can you suggest me where about link fvdw-sl V5.5 ?
Re: FVDW firmware "Case Install"
Posted:
Sat Oct 10, 2015 1:57 pmby Jocko
Here mursafirrlail :
viewtopic.php?f=7&t=2224 ;)
Re: FVDW firmware "Case Install"
Posted:
Sat Oct 10, 2015 2:03 pmby musafirrlail
Ok . Thanks a lot Jocko .. I go check this link :thumbup
Re: FVDW firmware "Case Install"
Posted:
Sat Oct 10, 2015 3:27 pmby musafirrlail
Hello Jocko
Are you have fvdw-console can run 64bit .. Or 32bit can use in 64bit you mean ?
Re: FVDW firmware "Case Install"
Posted:
Sat Oct 10, 2015 4:23 pmby Jocko
Yes it is the same version for 32/64bits
Re: FVDW firmware "Case Install"
Posted:
Tue Oct 20, 2015 6:24 pmby wd9895
I'm not successfull with the case install on a NWS2, too.
PC Firewall is off, IP of NAS is fixed (in router) on 198.168.178.45 and PC on 198.168.178.20
tftpd32 window opens.
clunc window opens.
clunc-open -i 192.168.178.45 (windows text)
provided by fvdw
waiting for u-boot..
nothing happens......
Also the portscanner does not find the NAS, but it's available. I can access the NAS.
Any advise ?
