FVDW firmware "Case Install"

[musafirrlail]

Heloo .

I had a little problem time I try install my friend D2N2 device. Telnet client always timed out , Maybe there is wrong with my step ?

http://i61.tinypic.com/9iwzua.png

Thanks you very much ..

[Jocko]

Hi musafirrlail,

I assume that you follows the usual advices : not use wireless connections, disable your firewall, ...

What version did you use with the console: 5.3, 5.4 or 5.5?

[musafirrlail]

Hello Jocko

This is same step time I use to my D2N2 and successfully, I have done turn off firewall and only use LAN (Not Wifi)

http://i61.tinypic.com/62ra.png

Are you have any step ? Thanks

[Jocko]

Hi musafirrlail,

You should use fvdw-sl version 5.5: it has a better network settings management.

[musafirrlail]

Hi Jocko,

Can you suggest me where about link fvdw-sl V5.5 ?

[Jocko]

Here mursafirrlail : viewtopic.php?f=7&t=2224 ;)

[musafirrlail]

Ok . Thanks a lot Jocko .. I go check this link :thumbup

[musafirrlail]

Hello Jocko

Are you have fvdw-console can run 64bit .. Or 32bit can use in 64bit you mean ?

[Jocko]

Yes it is the same version for 32/64bits

[wd9895]

I'm not successfull with the case install on a NWS2, too.
PC Firewall is off, IP of NAS is fixed (in router) on 198.168.178.45 and PC on 198.168.178.20

tftpd32 window opens.

clunc window opens.

clunc-open -i 192.168.178.45 (windows text)
provided by fvdw
waiting for u-boot..


nothing happens......

Also the portscanner does not find the NAS, but it's available. I can access the NAS.

Any advise ?